Making Geode Resin Coasters with Black Diamond Pigments

Happy with the look and effects from using great products like Black Diamond Pigments and Counter Culture DIY Artist Resin. There is a lot of work put into making these beauties but when using products that give excellent results it is worth doing. Describing exactly what I do and sharing tips for success is what matters to help you learn in my how to lessons.
Products:
Resin - Counter Culture DIY - Original Artist Resin (now called thick viscosity)
Black Diamond Pigments - Emerald Green, Hunter Green, & Pure White
www.blackdiamo...
FlowArt Resin Liquid Pigments - Green
Let's Resin - Silicone Druzy Molds
Michaels - Craft Smart Premium Gilding Paint - Brass
NEW! Resin Art Tutorials, a Facebook Group for resin art creators to share tutorials and for those wanting to learn more about resin art. Come join us!
/ 329177671458868
For more information about Moonkusser Art visit us on the web:
www.moonkusser...
Follow me on social media! 👍🏻 I would love to see you there ❤️
Facebook - / moonkusserart
Instagram - / moonkusserart
Twitter - / moonkusserart
Affiliate Disclaimer: a small commission may be earned from some of the links provided. I share information to the products I believe in and to help others locate those products should there be interest.

[@margaretperry2015]

They’re gorgeous. I just wanted to mention to you that I use white glue instead of the liquid latex. It comes off perfectly and the resin drips stick to it nicely. It’s also cheaper than the latex.

[@sheriphaff1886]

Ohh good to know - do you just use regular white school glue? Thank you

[@margaretperry2015]

Yes, just any old white glue. I put it on generously, so it takes quite a while to dry.

[@MoonkusserArt]

👍🏻

[@darshe68]

When you lifted the lid off of the curing coasters.....I swear I heard Angels singing!!! Those are super stunning! Thank you for all your teaching, I'm aspiring to learn this beautiful craft. Cheers from Texas!

[@MoonkusserArt]

Oh my goodness! Thank you Shelia 😁. I enjoy working with resin very much and I hope you will too 💕 Best regards from chilly NJ ❄️ Snowing today!

[@karenbaldry8096]

They are gorgeous

[@MoonkusserArt]

Thanks 😁

[@pamgillum720]

I really appreciate your instruction. You explain so much more than other artist. I’ve been watching resin videos fir a few months and you are one of a couple that explain the finishing process before adding final clear coat. Thank you

[@MoonkusserArt]

You are so welcome Pam! 😁

[@kathyfranken4256]

Turned out beautiful! I have started using elmers glue instead of liquid latex. I find that it works much better! You just have to make sure your resin is completely dry.

[@MoonkusserArt]

Thanks for the tip Kathy! I will try that sometime 😁 Glad you like the coasters.

[@nataliepurington3750]

Love these. Favorite colors

[@MoonkusserArt]

Glad you like them!

[@christinekoester4409]

I don't normally comment, but I have to thank you for showing how you do the top coat. Most tutorials do not, and I have a pile of coasters that need fixing because I didn't know the best way to do this. Thank you.

[@MoonkusserArt]

You are so welcome! I feel like it is important to show the whole process even if it can make the video a bit longer. Happy it helped 😁

[@EdnaWargon]

Love, love the greens! They are absolutely amazing 👏 😍 ❤

[@MoonkusserArt]

Thank you very much Edna 💚

[@corrinalabonte1411]

I like the back of them as well! These came out beautifully!! 💚

[@MoonkusserArt]

Thank you! 😊

[@caMpBeIIA]

Beautiful

[@MoonkusserArt]

Thank you ☺️

[@picassoronal300]

These are simply gorgeous!!! Wish I could perfect this ..lol You all inspired me to start making these

[@MoonkusserArt]

You can do it! Don't forget to check out the Black Diamond Pigments. Much of my success with making these coasters is from using their mica powders 💎 www.blackdiamondpigments.com/?sca_ref=90357.m4nhnEVQ9a

[@spiritsoulbody352]

You can also use a silicone makeup brush to spread the silicone as it is silicone the latex rubs right off after it dries! Beautiful coasters and love the color!

[@MoonkusserArt]

I just use my bare finger to apply the liquid latex now and it rubs clean too 😁👍🏻 Thanks 💚

[@karenstrong8887]

I love green but I didn’t think yours would all work together. They do and they are beautiful. Thank you.🌷

[@MoonkusserArt]

I’m glad you like it Karen. 💚

[@leeannjanson1936]

Beautiful coasters, love the greens, amazing effects 💚💚💚 Thank you for the tip🥰🥰🥰 Greetings from Devon in UK 😊😁

[@MoonkusserArt]

Thanks so much! 😊 Glad you like them.

[@Pashanny824]

I like the effects on the back of the coasters too. Some people use white glue instead of latex.

[@MoonkusserArt]

Thanks Denise

[@Heartwing37]

Black Diamond are my favorite pigments! Those and Paddy’s!

[@MoonkusserArt]

They are fun 👍🏻

[@happygirl2901]

I really love them the mica colors are beautiful

[@MoonkusserArt]

These greens are lovely 💚 Thanks

[@mookzmom]

Green is my favorite, and these are great! Very nice video!

[@MoonkusserArt]

Thank you very much Pam 🤗

[@picassoronal300]

You amongst the other great youtubers you mentioned are sooo good at creating these gorgeous coasters

[@MoonkusserArt]

Wow, thanks! Nice to hear we are doing good work 😁

[@CBlizard]

Super pretty! I been starting mine in the center but I will try this way to see how it does! 😁

[@MoonkusserArt]

Thanks and have fun. 😁

[@sherrislife2046]

I love your technique making these. They are beautiful👍❤️

[@MoonkusserArt]

Thanks so much 😊

[@gourdhead22]

Stunning.. I think putting the alcohol in pigment powder makes them blend together better. I get great striations. Now even with pigment pastes or liquid color I add a little alcohol. I took your tip about alcohol even further and love how colors marry together. Thanks for sharing

[@MoonkusserArt]

Thank you. I think it is terrific that you are exploring further. Good for you!😁

[@Poured_Out_Soul]

Those turned out so beautiful!!! ♥️😍

[@MoonkusserArt]

Thank you Tiffany 😊

[@brushenas]

Great video. thank you Why do you have some drops of alcohol? does it make any changes to the colors?

[@MoonkusserArt]

Helps pop bubbles and I think it changes the way it interacts in the mold.

[@educationallie9149]

i use clear silicone caulk and spread with my fingers to protect the backs when i over coat

[@MoonkusserArt]

Lots of alternatives I suppose.

[@annagravante3884]

These are pretty and a beautiful colour I love liquid latex I dry mine sometimes with an heat gun and I use a silicone brush I cover mine all over but I have seen people just use the latex on the edges enjoyed your tutorial thank you for sharing xx

[@MoonkusserArt]

Thanks Anna. I paint my edges and include allowing the clear top coat on the sides so that the paint is sealed to protect it from rubbing off.

[@cassiealesagapeinspiredcre853]

These turned our gorgeous!

[@MoonkusserArt]

Thank you Cassie 😊

[@bethsmith-resnik2791]

Wow. Thank you for this video. I have been struggling trying to figure this out and have done A Lot of trial and errors. More errors lol but trying. Your tips are sooo appreciated. Just followed you on IG and, you are an amazing artist. Again thank you.

[@MoonkusserArt]

It is wonderful to know my videos help others. Glad you enjoy seeing what I do. Thank you Beth. 💕

[@sheriphaff1886]

Gorgeous, excellent tutorial! Thank you!

[@MoonkusserArt]

You are so welcome! Thank you Sheri 😊

[@naptimecreations]

So pretty, love these 💚💚💚💚💚

[@MoonkusserArt]

Thank you Tish! 😊

[@naptimecreations]

@@MoonkusserArt 💚💚💚💚💚💚💚

[@MoonkusserArt]

😁

[@VICKY-dk3bh]

Hi, what you do is great ! If I make/create a plate that I don't like, can I modify it ?How can I modify a resin plate ? = put it in the microwave to melt it? In hot water? Or with a paint stripper? Thank you so much.

[@MoonkusserArt]

Thanks. I have never attempted any of those to "melt" the resin.

[@margaretrangel7110]

I have a 13 1/2” plate that I need to repair and without thinking I put it in a dish of rather hot tap water with some other pieces that I was going to wash... I took the plate out last and to my surprise it was very pliable… I could have reshaped it into a bowl, but since that was not my intent, I chose not too. When I took it out of the water, I placed on a towel to dry, then placed it on a flat cutting board to shape in back into the plate. It took a little while to cool off... once it had it was good as new. Blessings

[@saidalimam7201]

Hello my Dear, thank you for your lovely videos and helpful explanation. ❤️ When I pour my Resin (ultracast xt medium viscosity with pigment powder) it does not really flow to the middle of the mold and I do not get the effect I want. Do you recommend to add some drops of 99% alcohol? And is it not dangerous especially when I use the torch? Thanks in advance 🙏

[@MoonkusserArt]

Hi Saida. I think your resin is fine. Definitely try adding several drops of 99% alcohol. I put the drops in when mixing mica into the resin and will even add a couple more right before I pour it into the mold. I my opinion (and from my results), it does assist in getting the effect. Thank you for your kind words. 😊

[@robbiereed2175]

This tutorial is so informative!! Thank you for showing your work from beginning to end. 1. Regarding the resin flood coat, do you wait for it to thicken or pour immediately? 2. My resin on the sides kinda pooled at the bottom edge and dried. Possibly because I waited 10 minutes after pouring. Thank you so much for your time. These are beautiful!

[@MoonkusserArt]

Thank you Robbie. 1. The Counter Culture DIY Artist Resin is very thick. I begin right away once resin is mixed. By the time I am done applying the resin to the sides it has been 5 to 10 minutes. 2. I get the same at my bottom edge that you describe but it is usually minimal. I do examine for large drips and use my popstick to remove. You can use your popstick to sort of coax that to be thinner if you want. Appreciate your support on my artistic journey! 😊

[@michellerainwaters3608]

Your work is do beautiful ❤

[@MoonkusserArt]

Thank you so much!

[@valerieoberleexec-artist]

Stunning! I learned so much♥️♥️thank you!

[@MoonkusserArt]

You are so welcome! Thank you Valerie 😊

[@kimtomey4086]

Beautiful love your coasters. May I suggest putting dish soap on your brush really load it up and it should wash out.

[@MoonkusserArt]

Thanks Kim. I started using a recycled finger from my nitrile gloves and it works like a charm 👍🏻

[@GenXGlam]

These are beautiful!

[@MoonkusserArt]

Thank you 💚

[@sandyeubanks4972]

I love the green

[@MoonkusserArt]

Thanks. It is a lovely shade of 💚

[@criticalpsyko802]

Hi, Can you clarify which resin you use? The bottle in the video is the Artist Resin, but you mentioned medium viscosity which is a lime green/yellow design on the container.

[@MoonkusserArt]

Sure, I used the Original Artist Resin - counterculturediy.com/product/acrylic-pouring-resin-artist-resin-1-gallon/ Counter Culture recently added more types to their resin line.

[@nelllinds]

Hello lovely, I’m extremely new to all of this. But your work is absolutely beautiful 🥰 sorry if this is a stupid question, do you use alcohol when doing canvas pieces or just in coasters?

[@MoonkusserArt]

Beginners can ask no stupid questions first of all. You should ask! 😁 I do use alcohol on canvas pieces for effects as well. I did on this video (it's not canvas but it is done the same) - kzbin.info/www/bejne/hXfOYnRpa96Ca5I It is important to remember to not use the torch after using alcohol because of it being highly flammable! Be careful.

[@cindyklasson371]

Great video!! I just bought the same moulds as you are using here. I am wondering how many ounces of resin you used for each one?

[@MoonkusserArt]

Thanks. You can figure out how much resin you need for a mold by filling it with water. 😉

[@adrianamartinez1160]

True artist! Beautiful colors and awesome coasters! They turned out so beautiful! Where did you get those moulds? Would you please share a link if you don’t mind? Thank you!

[@MoonkusserArt]

Thank you Adriana 😊. The molds are from Let's Resin letsresin.com/collections/coaster-molds I had one set of the druzy geode molds and like them so much I bought another! 😁

[@adrianamartinez1160]

Thank you so much! 💕🦋🌷

[@saidalimam7201]

Thank you so much for your beautiful & helpful Videos! 🙏 Is it possible to put the topcoat 2-3 days later?

[@MoonkusserArt]

Thank you Saida. I have done top coat up to 48 hours later. Longer than 48 I would do a light sanding to the surface for adhesion and best results.

[@deborahswings]

They turned out beautiful hun and a must try so I have a few questions. Does the little bit of alcohol add to the great effects you got or it makes no difference? Do you find it easy to use the liquid latex and would you use it on larger pieces? I love the tip on brush stroking into the paint and not away, thats makes so much more scene when you see it done. Thank you so much for the shout out hun , trust me you inspire me with all you wonderful tutorials and amazing creations. 💕

[@MoonkusserArt]

Thank you Deborah. I believe adding the alcohol does help with the effects. The liquid latex is easy to apply. I don't know that using it on large pieces is worth it unless you would only apply at edges. Glad you liked my pearl of wisdom. And as always, thank you for being such a great friend 💕

[@deborahswings]

Moonkusser Art 💕🥰

[@irisstine5513]

These are gorgeous! Your videos are great. Which resin from counterculture do you use? Thank you

[@MoonkusserArt]

Thank you Iris 💚 counterculturediy.com/product-category/artist-resin/original/ Use my discount code 😁 at checkout & get $5 off $40 - moonkusserart

[@mikeerikashanuntedworldcre589]

So beautiful 😍 💖

[@MoonkusserArt]

Thank you Erika! 😊

[@GenXGlam]

I just used your code thank you Janet!

[@MoonkusserArt]

You are very welcome 😁

[@dennishight4419]

Will us resin hold up coasters hold up to high temperatures?

[@MoonkusserArt]

I used Counter Culture DIY Artist Resin (original) and it has a heat resistance for up to 500ºF and it has proven to me to be the best. You must give the resin 30 days for it to fully cure to get to that rating.

[@solmares1]

Hello, please, what do you use with the cotton swab to remove the fingerprints?, I do not understand the name well, thank you very much

[@MoonkusserArt]

I was not removing fingerprints. I had a tiny drop of paint and I removed the paint with artist's turpentine on the cotton swab.

[@ThisOLmaan]

Moonkusser Art: Thank you Much Mrs > MoonKusser Art am looking to make exact same coasters for a Att&t Tech person when came over to Fix my Internet and saw my other Reason pieces i previously had made and had on display and that was just some tester pieces i have made but this is exactly what the customer wants Elegant Green with hit of Gold or like on ur video Whint diamond pearl so Thanks i appreciate Ur Video for sharing with us All, very Beautiful pieces made here. Oh also thank you for the Pearl Wisdom LoL 🙂 i take all good Advice I'm not going to consider that ti but utilize it.

[@MoonkusserArt]

Glad you found inspiration in the video. Enjoy creating beautiful resin pieces 💚

[@ThisOLmaan]

@@MoonkusserArt : sure will thanks you you Mrs MoonKusser Art.

[@juanita92234]

Would it work if I used a coat if clear gloss to seal the golden age and top of the coasters?

[@MoonkusserArt]

What clear gloss?

[@wilhat]

Love them much better to do the edge that way always throught it was not finished of right,now dumb idea can you put the edge of the coaster when making them .say start this the edge then work in the normal way ?????????

[@MoonkusserArt]

I am not sure of your question Andrew. Can you re-word the question?

[@bev2hawky]

Beautiful,why did you add alcohol to the pigments please

[@MoonkusserArt]

Thanks! It is in the video about the alcohol. It helps to dissolve them in the resin.

[@wileycovington4497]

Use Elmer's glue instead of liquid latex. A lot of people , like myself, are allergic to even a touch of latex residue.

[@MoonkusserArt]

Always a good option as well

[@allisonwaller7556]

Why do u put a spray of alcohol in to make a paste. Watched thousands of videos an your the only 1 I’ve came across that does this ? Please explain why ?

[@MoonkusserArt]

The alcohol will dissolve the mica powder uniformly to make a paste or liquid state depending on how much alcohol you use. This helps to avoid clumps of powder and makes it easier to stir into the resin. It also changes the chemistry slightly providing some different effects.

[@aleksandrab1929]

How much time do you leave them to sit?

[@MoonkusserArt]

I am able to remove them from molds after 14 hours. Once they are completed with clear top coat of resin I allow for 30 days for complete hard cure.

[@aleksandrab1929]

@@MoonkusserArt Thank you! Your videos are so inspiring!! 😍

[@lyndapyleskelly]

Pretty

[@MoonkusserArt]

Thanks Lynda 😊

[@ashleechan22]

Some of the items are cheaper on Amazon..like $10 cheaper. Im poor so every dime counts 🤣 but I LOVE your work, you are so talented

[@MoonkusserArt]

There is many options for shopping. I like a bargain too! Thanks for watching 😊

[@Crimson11100]

Can I use low viscosity resin instead?

[@MoonkusserArt]

The resin with the color is a low viscosity. The clear coat layer has high viscosity. The low viscosity resin allows for the movement of the pigments & mica powders during the cure process.

[@2oceanside]

I bet WD40 would clean those brushes! Very pretty coasters!

[@MoonkusserArt]

WD40 might clean the brushes but it would ruin the brush over time. These did turn out nice 😁. Thanks!

[@ashleyh7587]

Hi there, these are stunning! I'm looking to make some myself, and I'm wondering - when you're using the mica powders, are you adding some type of alcohol to each of them before adding the resin? Is there a reason to add the alcohol, and if so, what type would I need to use? Thank you :)

[@MoonkusserArt]

Thank you very much Ashley 🤗 In this video I added several drops of 99% Isopropyl Alcohol to the Black Diamond mica powders in the cups to just moisten it and then added the resin. The alcohol will assist in the micas mixing well into the resin because the Counter Culture DIY Artist Resin is very thick right from the start. You can use 91% also, the 99% is difficult to get right now because of the Covid-19.

[@ashleyh7587]

@@MoonkusserArt thank you so much, I really appreciate you explaining that! Looking forward to trying my hand at something new ☺️

[@MoonkusserArt]

Enjoy 👍🏻

[@chatterbox8445]

😍😍😍😍

[@MoonkusserArt]

😊

[@thepartydogchannel4769]

👏🏻👍🏻👌🏻💐

[@MoonkusserArt]

😁