Making guns with tradition since 1993. ALFA - PROJ

[@89Harry89]

Nádherná prezentace :) Jsem fakt rád, že jsem se rozhodl pro revolver od Vás... Teď už si jenom chvíli počkat... :)

[@nameless_no_name]

very impressed with my initial impression of these wheel guns. Generally speaking, anything Czec I have bought has worked like a hot-damn! Out of the box my CZ75b was spot-on accurate, never jammed unless it was defective ammo, and fit like a glove once adding hogues. My CZ 858-2, deadly accurate hitting the frying pan at 200m with iron sights and no mechanical probs. Pretty good for out of the box surplus. I saw an Alpha for the first time today and was VERY impressed! There were a few minor finishing issues with slight superficial blemishes from manufacturing.... The sales guy said these guns are 85-90% the quality of an S&W for half the price. At the store I was at, 675 Canadian. For all you 'Mericans reading, that is currently 500 Yankee bucks for what looked like a very decent wheel popping .357. Sales guy went onto say he ditched his remaining Taurus inventory, which he designated as garbage vs Alpha, and blew the Taurus out at 50% on Boxing Day to make room for Alpha Project revolvers. I still think S&W are tops, but this seems to be the best value hand cannon I have seen (value being quality per dollar ratio)

[@betchalife]

no name New in canada 569.99 regular price for me. Just picked up 3551C, 38/357 . Cheap thrills!

[@michigunsanta8680]

Ruger makes great revolvers also but they are comparable in price to S&W...👍🏻

[@Deadtileyedie]

I love my sws and rugers. But korth are the finest revolvers out there right now..

[@dolphwundcreme7504]

Nice to see where my guns came from! Greetings from austria!👍

[@rafaelmadrigal1534]

Good quality control. I like that.

[@corpsiecorpsie_the_original]

More videos about your company and products, please.

[@mauriziocrovella8533]

very accurate and high quality revolvers!

[@easyfiveOsink]

I have the AL9.0 imported into the US via RIA. Very well made revolver!

[@BAZCS]

Moc hezky udělané video pánové.

[@pkiriakos1]

Just baught one.Will see how quality is at the range.❤

[@leopoldcz4869]

super video !

[@markchoro3095]

Why are your extractor rods so short, even on the 3-inch-and-above versions? Why don't you provide the most optimal (2.25-inch) version for your snubbie range as Ruger or Charter Arms do? I'm glad to see a 38 special chambering version based on the 357 magnum all-steel frame - built to last a lifetime I reckon, great stuff!!

[@danhold1]

Great quality

[@aaronchapman1613]

I want one to try out

[@InfBerBat143]

Why is the cylinder locked only with one part? Ruger has 3 locking parts. thanks. I have a Alfa 9x19 Revolver👌🏻

[@lsve79]

super vidéo!

[@silesiasurvival]

Bardzo dobre, tanie rewolwery. Szczególnie z 4 calową lufą w 357 magnum. Fajny rewolwer do noszenia, jak jest się wysokim człowiekiem.

[@Pidalin]

Co vlastně člověk takhle potřebuje k tomu aby mohl pracovat v továrně na zbraně? Potřebuje mít ňáký speciální papíry, že může dělat se zbraněma a dílama na ně nebo tak něco? Nebo je to čistě na zodpovědnosti toho zaměstnavatele že si tam třeba někdo nesestaví zbraň a neodnese si jí domů? V podstatě to vypadá jako normální strojní nebo zámečnická výroba.

[@lawrenwimberly7311]

I would like to see one of these chambered for .327 federal magnum.... I would be happy to review it for you

[@82luft49]

I just put an order in at Classic Firearms USA for the AL9.0 6 shot 9mm revolver for an excellent price of 515.00

[@mkw2555]

I have 3541 in stainless. Shooting great with 38 WC and 357 ammo. 38 FMJ are less accurate to my surprise. I had to widen rear sight as it was to narrow for me. Other than this gun is absolutely spectacular! I would buy it again 👍

[@SG__-gd1fy]

Anche io posseggo un 3541 acciaio inossidabile una vera cannonata ho sparato sia con i 357 che con i 38special molto precisi nonostante io non sono un cecchino molto bello speriamo che abbia lunga vita e di averlo sempre con me.

[@florianlan7232]

Mon prochain revolver sera un alfa proj en .357magnum :)

[@donaldmyck4296]

I saw a video with a guy that had one , a .22 long rifle with a .22 mag cylinder when he fired it in double action the gun would misfire. He tried blaming it on the ammo (Winchester), but it was gun. I'll never buy one

[@jamjinn786]

22lr and 22mag are not interchangeable, the cases are different, only the bullets are the same diameter. This guy was an idiot.

[@lawrenwimberly7311]

you mispelled engineering

[@alfaproj106]

Thanks for the heads-up. We are aware of that, but since the video has been posted and gained a lot of traction we are unable to change it at this point. Thank you for pointing that out though.

[@SG__-gd1fy]

@@alfaproj106 ottimi revolver ho 3541 stainless formidabile👍🔫

[@pavelziska1135]

Asi nejhorší video co jsem kdy viděl. Hlavně jak to upne do svěráku a bere ručně pilníkem. 🤦

[@autumnfragrance7185]

Where be the diversity ??!!

[@TheMotorick]

If this bothers you, go to a safe space with your coloring book and crayons.

[@autumnfragrance7185]

@@TheMotorick We will be the majority soon. Wait 10 years and see who rules the roost.

[@SC-qg8wp]

I'm sorry to burst your bubble, but employers here don't hire people based on their skin color, but on their skills. Also, as our population is mainly white, the percentage of "colored" people applying for these jobs is barely noticeable. No discrimination (negative or positive) is tolerated by our society.

[@gzik2991]

@@autumnfragrance7185 majority? perhaps overseas. New World always was a colony. Here in Czechia the ratio is 1 black per 10k citizens. Good luck with this majority claims lol

[@mikewest8855]

Hes an idiot