Making Homemade Silent Air Compressor [DIY]

This compressor is built all from scrap i bough from junk yard
it is quiet, and it work very well
for those who are willing to build air compressor like this one just take a closer looks at the video since i don't have plans for this,
SCRAP YARD PURCHASE
tank- $2
fridge compressor- $2
other steel- $1
and the pressure switch and check valve i also found
there was just given free by the junk yard owner.
THANK FOR WATCHING
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
#silent air compressor

[@RenielRabino-b5d]

Pwede napo ba to pang repaint sa motor

[@Adminstrator_admin3275BG]

How many mm electrode do you weld?

[@craftzars]

Cool build

[@markyboysermo7928]

Sir anong tawag dyn sa parang coppertube at fittings nya hangang checkvalve na kung saan dinugtong mo yang 2 copper tube galing sa 2 motor ayos na combinasyon👍

[@wildrooster1215]

Union at flearing nut sir

[@markyboysermo7928]

Dapat ba talaga may checkvalve sir sa akin wala pa try ko pag off ng motor pag on ko balik humming nlng sya di naandar

[@markyboysermo7928]

Then ilang uf capacitor nilagay mo for running?

[@hanselfita9188]

Sir paano po ba mag connect ng compressor to automatic pressure ng walang relay at overload

[@wildrooster1215]

Panoorin mo video ni AC TECH sir

[@dexterobispo8180]

Pede po kaya sa spray gun lag 1 compressor lng?

[@wildrooster1215]

Pwede boss kong pang personal use lang kasi kakapusin sya. mga 1 square meter lang aabutin. Pero kung gusto mo gamitan mo lang ng malaking tangke

[@michaelisaguirre1104]

May capasitor b yn

[@wildrooster1215]

Relay at OLP yan sir basta sa ref

[@pagsnacino7416]

Sir. Paki comment ngapo ng mga materials na gagamiten. Diko po alam mga pangan tag isa hehe. Gagawa din kmi ganyan sir. Salamat

[@wildrooster1215]

8kg Lpg tank air compressor check valve ¼ coppre tube connector pressure switch Refrigerator compressor

[@jonaheusebio3113]

Sir, pwede ba yan pang karga sa PCP, ilang PSI po kaya nyan? Salamat po sa sagot.☺

[@wildrooster1215]

90 psi po

[@edemuelrica6301]

Panu po magkabit ng wiring para saksakan sa compresor boss

[@wildrooster1215]

may guide po yan sa pressure switch sir

[@rolandruiz1972]

ilng minutes pi bago mapuno?

[@wildrooster1215]

5 mins po

[@chaserchaserspeedracer]

Never I smart idea to weld a pressure vessel together unless your a professional. I made one using an existing air tank. Just welded the motor brackets on top. But the fittings you welded is were Its dangerous. Just using an existing tank.