Making my own swim bait jig heads with Do-it Molds!

  Рет қаралды 23,723

Parabellum Fishing

Parabellum Fishing

Күн бұрын

In this weeks videoI show you how I make some lead swim bait jig heads. If you have any questions please leave then in the comments below. Ill be happy to answer them if I can. Remember that working with lead can be dangerous. Always wear the proper PPE! Do your homework and be safe if you plan to try this on your own. Thank you for watching!! Y'all don't know how much I appreciate it!

Пікірлер: 119
@swiftcreations7688
@swiftcreations7688 3 жыл бұрын
LOL!! So that's where my spoon went!!! Oh, and my missing cookie sheet under the lead pot!! LOL!!!
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Love you!!! 😁
@owlsnestoutdoors
@owlsnestoutdoors 6 ай бұрын
DIY fluid bed for sure. Great video content also 😊.
@ParabellumFishing
@ParabellumFishing 6 ай бұрын
Thanks man! This is still my most popular video.
@johnrega34
@johnrega34 3 жыл бұрын
Very cool video. The process looks fun.
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Thanks man! It is fun. And the options are endless. Brett came over once and made a few. He seemed to like it. Thanks for watching!
@shannonkirby9295
@shannonkirby9295 3 жыл бұрын
That is so cool, Joe
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Thanks Shannon! 👊🏻 I recently modified that mold. Haven’t had a chance to try it yet but it’ll give me some other options.
@DpuckFishingandOutdoors
@DpuckFishingandOutdoors 3 жыл бұрын
Get the lead out! Cool video. It was neat to watch the process. I like the hooters cup there. 😜
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Thanks man! Glad you enjoyed it. It’s a good cup 😂
@SteveFromWyoming
@SteveFromWyoming Жыл бұрын
Had to rewatch this - it's a good one
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Thanks man!
@NYCE_Fishing
@NYCE_Fishing Жыл бұрын
This is going to be great to do during the winter months here in New York.
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Its funny, I would had never thought of that being in FL, but several people have told me they may start making jigs as their off season hobby. I recommend it. It can be addicting. LOL Thank you for watching! Glad you enjoyed it 👊🏻
@Tajrbatsyad
@Tajrbatsyad Жыл бұрын
Good finish 👏
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Thank you! 👊🏻
@beavisbrowne3497
@beavisbrowne3497 2 жыл бұрын
Superior presentation! I subbed immediately
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Thank you very much! I appreciate that! Welcome to my channel 👊🏻
@NoRedemptionOutdoors
@NoRedemptionOutdoors 3 жыл бұрын
Oh this is exactly what I'm looking for. I'm very interested in making my own baits. This really interests me. GREAT JOB! For sure keep doing these diy vids! You will grow fast.
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Thank you sir! Im glad you liked it. Making my own jigs has been a fun hobby. In fact, my current PB bass was caught on one of the Ned rig heads I made. 😎 I’m a big fan of your channel and I’m honored you watched mine. Looking forward to seeing you get out on the water more. Thank you for watching! 👊🏻
@jessehandlin7589
@jessehandlin7589 Жыл бұрын
Great video now I want to make some thanks
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Hey thanks man! You should make some. It’s fun 👊🏻
@1ManOpFishing
@1ManOpFishing 3 жыл бұрын
Great video Joe, all you need are some of those Senko soft plastic molds and you can start you own line, "PARABELLUM BAITS"!! I look forward to trying some of those out soon.
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Great minds think alike. I actually already have that exact DBA name. It’s also my Instagram profile. Working on packaging and a few of the boring parts. I already got some set aside for ya 👊🏻
@1ManOpFishing
@1ManOpFishing 3 жыл бұрын
@@ParabellumFishing Thanks Joe, is your email up and running?
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
@1ManOpFishing not yet but I see where your going with that. My other business email is still active.
@1ManOpFishing
@1ManOpFishing 3 жыл бұрын
@@ParabellumFishing Will contact you soon.
@bayoubuckoutdoors
@bayoubuckoutdoors 2 жыл бұрын
This video popped up as a suggestion. Pretty cool bro! That paint is a trip. Never realised the lead pretty much hardens instantly. This has me wanting to try it myself. lol
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
This is my most viewed video. The fact that it popped up, may explain why. Told ya bro, super easy to do. If you decide you wanna try it, hit me up.
@bayoubuckoutdoors
@bayoubuckoutdoors 2 жыл бұрын
I may do that. I like that particular jig you poured. Really considering getting started with all that.
@mohamedshrpine2904
@mohamedshrpine2904 Жыл бұрын
Very good
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Thank you! 👊🏻
@mod-lfishingandoutdoors
@mod-lfishingandoutdoors 3 жыл бұрын
Awesome!!! Great video, better hope the wife doesn’t watch! She might be mad about the spoon lol.
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Thanks man! I think she already watched it. She was sitting across from me on her computer and cut me a look! 😂😂 Just wait until she realizes it’s also her baking pan under my lead pot! She’s pretty cool about stuff like that.
@bassmunitions5834
@bassmunitions5834 2 жыл бұрын
I liked your video. Plan and simple and to the point. I have a couple of questions. Where do u buy your hooks, bait holders , and lead from, and is there a certain grade lead you recommend as well? I’m going to start making my own. I lose way to many up here in TN where I live now . I lived on lake o for 32 years and I didn’t use a lot of jig heads like I do up here. Thanks for your time.
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Thank you! I appreciate your feedback. I buy most of the components online. Sites like Barlowstackle.com and janns netcraft. Even tackle warehouse sometimes has a deal. Of course, the do-it molds website. Regarding the lead, I’m honestly not picky about it. In my experience the quality of the lead only fluctuates the weight a little and for me, it’s not noticeable. I’m sure plenty would disagree with me, but the fish don’t notice lol. I buy lead weights on clearance at Walmart sometimes and I bought a bunch of lead projectiles from a local gun show. I use those a lot. I hope this helps! I’m no pro at this but Im Happy to share what I’ve learned. Thank you for watching! 👊🏻
@jgoutdoorsandrangefun3488
@jgoutdoorsandrangefun3488 3 жыл бұрын
Another great video. Very informative Joe. Do you do the stand up style heads? Have you thought about the bladed swimbait heads?
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
Thanks man! Yeah currently I have the molds for a football jig, arky jig, Ned head, swim bait, and poison tail swim jig. I looked into the blade baits but probably not something I’ll make. Don’t use them very often. I do want to get a shakey head jig mold. I use them all year round.
@wellhookedWA
@wellhookedWA 3 ай бұрын
Hi mate. Really great video. I'm in Australia and just looking at pouring my own jigheads. I follow lots of USA channels for tips and tricks which may translate into Australian conditions. The swim bait jigheads you demonstrated look good. Where do you get the hook keepers from? Thanks for sharing your knowledge and learnings.
@ParabellumFishing
@ParabellumFishing 3 ай бұрын
Thanks for watching bud! I’m glad you like my video. The part number for the wire keeper is WDB1000 and I buy mine from multiple sources. But I find that Barlows tackle . Com seems to have them in stock. I have a buddy in Australia so I know sometimes there are issues getting things delivered so try to search the part number. You may find a local distributor? I hope this helps. Thank you again 👊🏻
@josesalas7935
@josesalas7935 Жыл бұрын
Great video just getting into make jig head as well, just want to know where u get ur molds from thxs
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Hey thanks man! And welcome to world of jig making. I get most of my molds from Barlows Tackle. Type it into Google, it’ll pop up. Some from eBay when I find a good deal on it. Thanks for taking the time to watch and leave a comment. I appreciate it! Enjoy your new hobby! 👊🏻
@gulfside-qn1on
@gulfside-qn1on 2 жыл бұрын
Great video! I am about ready to start casting some jig heads for the first time. I have had gread success with the egg sinker molds and hopefully my jig molds will be as successful. I have never powder painted before though. In every video I have seen so far, everyone uses a heat gun to heat the jigs to dip into the paint. My question is, why not preheat the jigs in the toaster oven instead? Then when you have paint on all of them, turn up the heat on the toaster oven and bake them for final hardening. Would that work? Seems like it would eliminate a little of the guess work required with using the heat gun?
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Thanks man! Glad you liked it. I’m actually posting another video tomorrow where I make some EWG style Ned heads. I had that same thought about heating multiple jigs in the oven. I haven’t tried it yet tho. The issue I think I would have is keeping the lead hot enough to take an even coat of paint. It cools so quickly. But I need to try it out. I have to make a few hundred of the things for an upcoming event. That would sure speed up the process. Thanks for watching and taking the time to leave a comment. I really appreciate it 👊🏻 Good luck with your jigs! I’m sure if you’ve had success with the egg sinkers, your jigs will rock too!
@Paul_T82
@Paul_T82 3 жыл бұрын
Great video. I've been wanting to try this.
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
I highly recommend it! It’s fun and pretty awesome to catch fish on a bait you made. I just recently modified that mold to change the head up a bit. Haven’t poured any with the modified mold yet but hopefully this weekend.
@Paul_T82
@Paul_T82 3 жыл бұрын
I hope it works out for you. Will you be sharing the results?
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
@@Paul_T82 I have high hopes for it. Good or bad, I’ll definitely share what I learn from it. Good thing is that my modification doesn’t permanently affect the mold. So if I don’t like it, I can revert it back to the original.
@Paul_T82
@Paul_T82 3 жыл бұрын
Thats cool. I look forward to seeing what you did. Where do you get the lead to make your jig heads?
@ParabellumFishing
@ParabellumFishing 3 жыл бұрын
@@Paul_T82 Yeah I’m hoping it works out. It’s not a huge change but better for rigging a plastic I think. My lead is mostly from bullet projectiles actually. My friend brought me 30 pounds or so of lead rounds in some obscure caliber he picked up at a yard sale for super cheap and I’ve been using them for months. But I also mix in lead from old cast nets and sometimes I buy large sinkers at Walmart when they are on clearance.
@trreb1
@trreb1 5 ай бұрын
I just bought a mold at an auction in Hillsdale, Mi last weekend. Thought it was a sinker mold but found out when I got home it was for jig heads. No problem, I'll still use it. It's the type that has a "keeper" built into the mold to keep the baits on. Do you have to order the hooks on line or would some place like Bass Pro Shop's have then on hand?
@ParabellumFishing
@ParabellumFishing 5 ай бұрын
It depends on the style of hooks you need. Many of the 90 degree bend hooks are sold in stores like bass pro. I have even seen some of the eagle claw hooks I like at Walmart. But some of the more "specialty" jig hooks may not be available locally. I buy online just because of the quantity I keep stocked.
@sitiindarti2046
@sitiindarti2046 2 жыл бұрын
Nice nice suceses
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Thank you. It’s fun to do
@russellshelton1600
@russellshelton1600 2 жыл бұрын
What mold are you using? Thanks
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
In this video I’m using the Do-it Swimbait Head Jig Mold SBH-5-A Thanks for watching! 👊🏻
@fishingwithfrighty1615
@fishingwithfrighty1615 8 ай бұрын
Hi dude great vid. Question… these moulds have a recommended hook size. Could you go up a size or 2 and still pour the jig head? The moulds I like the look of all recommend small hook sizes. Thanks
@ParabellumFishing
@ParabellumFishing 8 ай бұрын
Thanks man! Short answer is yes, you can use larger hooks than recommended in most cases. I have used larger hooks in the smaller cavities and so far, I just had some flashing around the hook eye. No big deal. Easy enough to clean up. So long as the mold closes, you should be ok. Once the shank diameter exceeds the space the mold has, the mold won't close and you'll get some bad pours. Hope that helps!
@fishingwithfrighty1615
@fishingwithfrighty1615 8 ай бұрын
@@ParabellumFishing thanks for the quick reply. That answers my question. I may just buy one and have the hook moulds slightly enlarged at a machine shop, probably cheaper than having a custom mold made. Cheers
@ParabellumFishing
@ParabellumFishing 8 ай бұрын
@@fishingwithfrighty1615 No problem bud. I tell ya tho, a little patience and a file, you can enlarge them yourself. The metal is very easy to work with. I have used a file on a different mold with great results. And, if you need it, hi temp gasket sealer can fill back in most mistakes. Good luck! 👊🏻
@chrisb5345
@chrisb5345 11 ай бұрын
Can you paint on lips and gills on top of the powder coat?
@ParabellumFishing
@ParabellumFishing 11 ай бұрын
Actually, yes you can! They even sell a powder clear coat that you can seal the paint in with. I have tried getting a little more creative with the paint jobs since this video was made. I think I'm making progress. Thanks for watching!
@bogolyskeepingitreel
@bogolyskeepingitreel 6 ай бұрын
@bobbypetro1218
@bobbypetro1218 Жыл бұрын
Is that the mole from Megabas 🎣😎💯👍🏻
@ParabellumFishing
@ParabellumFishing Жыл бұрын
It is not the exact mold, but very similar. With a look down eye, hard to see the difference. Thank you for watching and taking the time to leave comments. I appreciate that!
@botoepfer8588
@botoepfer8588 10 ай бұрын
I always get the powder in the hook eye any suggestions?
@ParabellumFishing
@ParabellumFishing 10 ай бұрын
Yeah that is nearly unavoidable. For me anyway. I have seen other people use a small piece of tubing over the eye but that seems real time consuming. I keep a spare hook with me while painting and just clear the paint out while its still hot. I also dont bake my personal use jig heads anymore. A little chipped paint doesn't bother me much. But when I do bake them, It really helps to bake them standing, rather than hanging. Keeps the paint from drooping too. I hope that helps. Thanks for watching bud! 👊🏻
@elmacanudo5472
@elmacanudo5472 10 ай бұрын
Esta chingon el video bro 🤙
@ParabellumFishing
@ParabellumFishing 10 ай бұрын
Gracias Homie 👊🏻
@elmacanudo5472
@elmacanudo5472 10 ай бұрын
👊
@elmacanudo5472
@elmacanudo5472 10 ай бұрын
New subscriber 🎣🎣🎣
@ParabellumFishing
@ParabellumFishing 10 ай бұрын
@@elmacanudo5472 Awesome! Thank you
@chrissewell1608
@chrissewell1608 5 ай бұрын
I have been looking for YEARS for a jighead mold for a "Skimmer Jig / Flats Jig" head mold! No one sells it commercially, that I have found. Its triangular and flat. Have any ideas?
@ParabellumFishing
@ParabellumFishing 5 ай бұрын
I looked up the jig style and I dont think DO it makes anything that would be an exact match, but they may have something close? Otherwise, and this is something I have considered doing myself, buy a blank mold and it machined. The prices for custom machining are higher than I thought they'd be. But it may be worth looking into if that is something you really want. you could even tweak the specs to your needs. Sorry, I am sure you have already thought of that and im probably not much help, but I hope I helped a little.
@aj.roseby4695
@aj.roseby4695 Жыл бұрын
If you hold your mold over a lit candle and get the black smoke on it the lead will release easier boss.
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Hey thanks for the tip! Since this video posted, I have tried that trick and it has absolutely helped. Appreciate it! 👊🏻
@ExamendeGrado
@ExamendeGrado 2 жыл бұрын
Hello, what is the nace of the lead dispensan machina?
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
It’s made my LEE. It’s a lee 10 pound melting pot. barlowstackle.com/Lee-10Lb-Lead-Melting-Pot-BR110-Volt-Model-P345/
@pontiacmonkey
@pontiacmonkey 9 ай бұрын
Can these molds take 60 degree hooks or just 90?.
@ParabellumFishing
@ParabellumFishing 9 ай бұрын
This mold is designed for the 90 degree hooks. The do it poison tail jig mold will accept some 30 degree hooks. I just poured a few yesterday to use as swim bait heads.
@SDGCustomLurecraft
@SDGCustomLurecraft Жыл бұрын
Will a 3/0 32746 fit in the 1/4oz?
@ParabellumFishing
@ParabellumFishing Жыл бұрын
Honestly I am not sure. I actually went out to the garage to check for myself and as it turns out, I dont have any 3/0 in that style. I tried fitting a 3/0 VMC 9147. With that test fit, I would say, maybe. It looked like there would probably be some flashing by the eye and IF you used the called for plastic keeper, it would run almost to the bend of the hook. I didn't pour it so I can not say for sure. But, I am hoping to pour some jigs this weekend and if I do, I'll try it out the VMC and get back to you.
@SDGCustomLurecraft
@SDGCustomLurecraft Жыл бұрын
@@ParabellumFishing thanks for the info!
@ParabellumFishing
@ParabellumFishing Жыл бұрын
@@SDGCustomLurecraft I hope it helped!
@larrylambert6512
@larrylambert6512 2 жыл бұрын
Hey sir we’re do u get the lead maker and head maker designer from wat site
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Hey there. I get most of my lead molds through Barlows tackle.com. I think the lead pot was from Amazon. But Barlows sells them too I think. I use Do-it molds. They have a site too. Hope this helps!
@devatwell334
@devatwell334 2 жыл бұрын
What size production pot is that 1?!
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
That’s a 10 pound pot. I don’t like to fill my pot too high, for safety, so the larger pot keeps me pouring without having to add lead too often.
@anthonymagill3714
@anthonymagill3714 2 жыл бұрын
Chop stick is great for lining up hooks and no burnt fingers
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
That’s a great idea! Thanks for the tip! I’m still Learning 👊🏻
@neilphillips1457
@neilphillips1457 Жыл бұрын
I'm in uk where can I purchase those moulds please
@ParabellumFishing
@ParabellumFishing Жыл бұрын
I’m not 100% sure. Try the do it molds website. If they don’t ship to the UK, they may be able to point you in the right direction.
@neilphillips1457
@neilphillips1457 Жыл бұрын
@@ParabellumFishing thank you
@ParabellumFishing
@ParabellumFishing Жыл бұрын
@@neilphillips1457 no problem. I hope that info helps 👊🏻
@andressalcido3853
@andressalcido3853 Жыл бұрын
Cuánto cuesta el molde para ASER los gigs porfa
@jacobperez5977
@jacobperez5977 2 жыл бұрын
Awesome video man. I plan on buying some of these molds soon as well as the lead warmer. Just wondering Where do u get the lead from?
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Thanks man! 👊🏻I started by buying lead ingots online. I also buy clearance lead weights from Walmart. I found a cast net while out fishing once and cut all the lead off it. A buddy gave me a ton of lead bullet projectiles. Think he bought them at a yard sale. Sometimes you get lucky with that kind of stuff but the internet is the sure source. Thanks for watching man! I got another jig video coming in a couple of weeks. EWG Ned heads.
@andressalcido3853
@andressalcido3853 Жыл бұрын
En donde puedo comceguir los molde y cuánto cuesta para ASER los
@ParabellumFishing
@ParabellumFishing Жыл бұрын
The molds cost around $50 each. You can get them online. Try the Do-it molds website. They will point you in the right direction
@matthewstoltzfus6688
@matthewstoltzfus6688 2 ай бұрын
4:52 try smoking ur mold to help lead out
@ParabellumFishing
@ParabellumFishing 2 ай бұрын
I actually have smoked that mold since this video and you are right. it definitely helped! Thanks man!
@salimeduzone891
@salimeduzone891 3 ай бұрын
What all safty we must keep when melting lead
@ParabellumFishing
@ParabellumFishing 3 ай бұрын
I recommend a well ventilated working area. Respirator, gloves, and safety googles at least. A face shield could be a good option. And plenty of common sense. No eating or drinking in the area. Hope this helps
@salimeduzone891
@salimeduzone891 3 ай бұрын
@@ParabellumFishing do you sell mold
@ParabellumFishing
@ParabellumFishing 3 ай бұрын
@@salimeduzone891 no sorry I do not. Try do it molds . Com.
@vaschier72
@vaschier72 Жыл бұрын
Thank to you for this video, what is the name of this mold or the number model if I want to order one, and the powder paint it is the same dealer you bought it, your jig is similar that megabass balance body it is very a beautiful mold,
@ParabellumFishing
@ParabellumFishing Жыл бұрын
It's my pleasure! The mold in this video is the DO-IT 3523 SBH-5-A SWIMBAIT HEAD MOLD. It is very similar to the Megabass head and use them quite a bit. The plastic keeper isn't my favorite, but it works. I have cut it down here and there and it tears up the bait less. I usually get my molds and powder paint from Barlows Tackle but there are other sites out there including the DO-IT molds site. Tackle Warehouse also has a small assortment of molds and paint. I hope this helps! Thank you for watching!
@vaschier72
@vaschier72 Жыл бұрын
@@ParabellumFishing thank you very much for this rapidly answer, just a last question ,it is a 3/8 oz jig or 1/2 oz jig thanks again
@ParabellumFishing
@ParabellumFishing Жыл бұрын
@@vaschier72 No problem. I happen to be sitting by the computer right now. This mold will make jigs in 1/4oz, 3/8oz, 1/2oz, 5/8oz, and 3/4 oz.
@fishingwithcamo-joe88
@fishingwithcamo-joe88 2 жыл бұрын
SWEET!!!!!!!!!!.....WHERE DID YOU FIND THAT BOTTLE OF G,GLUE..??...I NEED THAT....LOL... I MAKE CRAPPIE JIGS & I PAINT MY HEADS & ADD THE EYES...HAVE'NT SEEN THAT STYLE OF BOTTLE...THE TIP LOOKS PERFECT.......
@ParabellumFishing
@ParabellumFishing 2 жыл бұрын
Ha! Thanks man! 👊🏻 I usually buy it at Michael’s craft store. With the coupon it’s around $3. Works perfect. Locktite also makes the same style. Thanks for watching 👊🏻
@joshorden2545
@joshorden2545 8 ай бұрын
What about adding a weedguard
@ParabellumFishing
@ParabellumFishing 8 ай бұрын
With a little time and effort, anything is possible I guess. But I also have a poison tail jig mold that has the base pin for the weed guard. So if I need a swim jig style, I use that mold.
@joshorden2545
@joshorden2545 8 ай бұрын
@@ParabellumFishing ok Ty I’ll definitely try this in future love the videos keep posting
@user-tt6ef5ms8q
@user-tt6ef5ms8q 3 ай бұрын
Where can you buy a furnace? What is the name of the product you searched for? I can't find a furnace like yours. Can you tell me the brand of your furnace? Thank you, dear friend.
@ParabellumFishing
@ParabellumFishing 3 ай бұрын
Happy to help! It’s called a Lee lead production pot. Mine is the 10 pound capacity. I think I got mine from Amazon but there are many online retailers that carry them. Hope this helps!
Best Jig Mold? Making jigs with the Do-It Molds Poison Tail Jig Mold
10:53
The Basics Of Pouring Your Own Lead Jigs/Weights.
16:40
Key West Kayak Fishing
Рет қаралды 23 М.
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 28 МЛН
Как бесплатно замутить iphone 15 pro max
00:59
ЖЕЛЕЗНЫЙ КОРОЛЬ
Рет қаралды 8 МЛН
No empty
00:35
Mamasoboliha
Рет қаралды 10 МЛН
How To Make Under-Spin Swimbait Lead Jigs, Angling Ai Molds
27:13
World's Worst Fishing
Рет қаралды 9 М.
DIY jig head mold easy an cheap!!
20:23
Fish'n life
Рет қаралды 33 М.
Make Your Own Jig Heads for a FRACTION OF THE PRICE and its EASY
13:06
How to Make Your Own Jigs | DIY Tackle Making
16:26
DEBO'S Fishing
Рет қаралды 30 М.
How To Pour Jig Heads (Beginner Bait Making Series)
5:22
FishIN with GRAMPS
Рет қаралды 10 М.
WATER MAN  / jig making , worm hook making
19:10
WATER MAN
Рет қаралды 12 М.
How to POUR your own JIG HEADS to SAVE MONEY (EASIEST WAY!)
10:47
Nathan Quince Fishing
Рет қаралды 42 М.
I Got a New Do It Mold! Free Style Jig
7:45
Parabellum Fishing
Рет қаралды 8 М.
Making Custom Lead Swimbait Jig Heads (Part 2 of 2 - Pouring the Molds and Lead)
24:41
The Neverending Projects List
Рет қаралды 109 М.
Making Tube Baits with the Do-It Molds Tango Tube Mold
13:38
Matt Luna Fishing
Рет қаралды 2,7 М.