Tap to unmute

Making soft plastic baits and epoxy/plaster injection moulds

  Рет қаралды 52,285

The Handmade Fisherman (The Handmade Fisherman)

The Handmade Fisherman (The Handmade Fisherman)

Күн бұрын

Пікірлер: 158
@zoffinger
@zoffinger 7 жыл бұрын
I've made molds and you did a very nice job, but what's really impressive is the quality of your videos. Truly, top notch.
@SplishSplashFishing
@SplishSplashFishing 7 жыл бұрын
Nice build there Paul. Finding materials that enable you to make and test quickly is really satisfying. A few good ideas has taken root on behalf of this - Thanks
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i was just glad it all worked and when then mould popped a part i was little bit relieved
@markwyn2040
@markwyn2040 4 жыл бұрын
What a fantastic tutorial for beginners and the interested alike. Thank you for sharing your stories and How-To’s. Very well done.
@eagleleopard
@eagleleopard 7 жыл бұрын
I think a beaver style creature bait, or a crawfish type bait would be really neat. I don’t know if you use anything like that there, but the bass in the southern US love them.
@ernieantonucci7702
@ernieantonucci7702 7 жыл бұрын
Jeremiah Parris- absolutely
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I think more and more anglers over here are using those type of creature baits for perch so I may give some creatures a go thanks
@BUSHCRAPPING
@BUSHCRAPPING 7 жыл бұрын
yeah micro crayfish would be cool for perch and some water bug larva baits would be cool, really micro stuff i bet chub would like them too!!!
@Praveen501
@Praveen501 7 жыл бұрын
I'm so lucky to have found your channel.
@cmiller3371
@cmiller3371 7 жыл бұрын
Any chance of making something larger for pike, like a huddleston swim bait or a large glide bait ?
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I will at some point, i might be going to Ireland in November and will need something for deep trolling thanks
@realsreet
@realsreet 7 жыл бұрын
A small 3-inch shad for perch would be great, keep up the good work!
@thanoob2978
@thanoob2978 7 жыл бұрын
If you are into drop shoting you should definitely consider making some crostail shads. The perch seem to love them and I was able to get some good chub and trout to bite too. My favorite is a transparent white with black and silver glitter in 75 millimeter.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i was thinking of doing some small shads, just to give me something different for the hook and also there was a lot fry about where i was fishing, thanks, not see the cross tail shads before so i will look them up
@thanoob2978
@thanoob2978 7 жыл бұрын
The best image of them that I could find is in the Illex catalouge 2014 around page 68-72
@randyknighty
@randyknighty 7 жыл бұрын
Hi Paul. I think the weedless lures are really useful and would be a decent challenge for you and would like to see you have a go at that. A weedless roach lure for pike or something for seaweedy pollock areas. I bet you could improve on the shop bought ones! 🤓
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I did whats a guy in scotland lose about fifty quids worth soft plastics to kelp so it is a good idea, thanks
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I did whats a guy in scotland lose about fifty quids worth soft plastics to kelp so it is a good idea, thanks
@Waterbottlesandcans
@Waterbottlesandcans 7 жыл бұрын
I don't know if they work in your area but creature baits could be fun. They would be a good test of how complicated you could get with the shape and still get a good release.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
creature baits are a must i am not sure what I will catch with them but i like the idea
@akapd7914
@akapd7914 6 жыл бұрын
Great idea!! It seems a cheaper more attainable technique to make a mold, and I would like to she the some technique on a multi cavity mold using this technique. If you don't try it no worries I might try myself
@BUSHCRAPPING
@BUSHCRAPPING 7 жыл бұрын
id like to see a few lures made without power tools or special plastics, that would be cool also more coarse tackle like the feather floats and the homemade feeders they were epic!!!!!
@humblehombre9904
@humblehombre9904 2 жыл бұрын
Your vids are just great brother. Nice work. Thank you, warm regards. “Snot and chewing gum”….my kind of guy lol!
@StygianBlood
@StygianBlood 7 жыл бұрын
Great video bud....gonna have to give this a try with bigger stuff for saltwater
@SolarfallBaits
@SolarfallBaits 7 жыл бұрын
Great video again paul, always enjoyable to watch you make stuff
@integraellie
@integraellie 7 жыл бұрын
SolarBaits me too, his voice is very soothing lol
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
cheers mikko
@mahjayedagoat6031
@mahjayedagoat6031 7 жыл бұрын
The Handmade Fisherman could I possibly have a couple of those baits to fish with?
@DGAF2000
@DGAF2000 7 жыл бұрын
Wonder if you could make a paddle-tail plastic
@ReynardScott4316
@ReynardScott4316 7 жыл бұрын
Great video. Would have never thought to try that. Ima have to give it a shot.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
good luck and thanks
@raveblade7571
@raveblade7571 7 жыл бұрын
I love how this reminds me of you're old videos
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
it did feel like i was going back in time a bit but it felt a bit more watchable than some i have made, thanks
@jonnywaselectric
@jonnywaselectric 7 жыл бұрын
Could you make a small vibrating table to put your molds on when pouring to work the air bubbles out
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
it does not really need it, it would have no effect on the epoxy and the plaster is just a backing
@jonnywaselectric
@jonnywaselectric 7 жыл бұрын
The Handmade Fisherman for when you pour the soft plastic, I thought I spotted a couple air bubbles
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i think pressure will get rid of them and better care when i mix and heat the soft plastic
@jonnywaselectric
@jonnywaselectric 7 жыл бұрын
The Handmade Fisherman I trust your skills, one time when I was a kid at poured hot wax into a plastic dish with glitter in it, I thought it was pretty awesome
@TheAudiostud
@TheAudiostud 7 жыл бұрын
Another classic production old school Paul Adams, for drop shoting how about Mackerel fry or Sand eels, the Sand eel may easy to produce as silver & white not to sure about Mackerel might be to many colour parts Black, Green & Silver but I know how much you relish a challenge Fella "Great Work, Well Done"
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yes sandeels would be great, i was thinking about doing some soft plastic on when i was up in scotland for the pollock or the mackerel cheers
@TheAudiostud
@TheAudiostud 7 жыл бұрын
Thank You Paul, fishing the Pembroke Coast line using Shads, the Pollack, Bass loved the Blue Top & White Belly with Silver Pearl Fleck!
@paulclarke267
@paulclarke267 7 жыл бұрын
excellent as usual could you try a two coloured lure
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yes, i do want to try this making a dual injector, cheers
@paulclarke267
@paulclarke267 7 жыл бұрын
i will be looking forward cheers
@eyyupkavalci
@eyyupkavalci 7 жыл бұрын
Thanks for the great work Dear Paul..you look so tired..I hope you are ok..best wishes..
@gravelcreekfarms3850
@gravelcreekfarms3850 7 жыл бұрын
Here in the states(Ohio) I use allot of large and small tubes to catch small sunfish to large and smallmouth bass. Curious if you use them there much and if you've made them.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i think that would be a good challenge, that may have to wait until i get a bit more confident using this method, thanks
@gravelcreekfarms3850
@gravelcreekfarms3850 7 жыл бұрын
The Handmade Fisherman I have the utmost confidence in your ability
@therenumerator9198
@therenumerator9198 7 жыл бұрын
Maybe a small curly tail worm or lizardish thing? The video was nicely done.
@Overthecounteroutdoors
@Overthecounteroutdoors 7 жыл бұрын
When you put the 5 minute apoxy on do you completely cover the original?
@thanoob2978
@thanoob2978 7 жыл бұрын
ian santoro not exactly you just need to make sure that the whole mold is covered with a thin layer of epoxy. But theoretically you could make the whole mold out of epoxy it would just be more expensive. There won't be much of a difference I suppose.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yes, but only a few millimetres
@bogdanRules
@bogdanRules 7 жыл бұрын
Nice ideas. You said that you keep the vaseline off the worm....doesn't the epoxy stick to the master that way?
@t_cadventure9561
@t_cadventure9561 7 жыл бұрын
Awesome video! just a suggestion make a hard bait (Eg crank bait or minnow) out of the polymorph.
@utd709
@utd709 7 жыл бұрын
while ive being using the vac 50 for my injection molds and between buying it and importing it it is quite expensive im just wondering how to do find the jesmonite for repeated injection pourings
@thomashill8238
@thomashill8238 7 жыл бұрын
As I keep saying great videos Paul.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
Thanks Thomas
@garrettbone3270
@garrettbone3270 7 жыл бұрын
The low key "shit" when he poured in too much silver.😂
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I thought i better leave that in, i was expecting the bottle to have a dropper, cheers
@davidhelmedrummer2004
@davidhelmedrummer2004 7 жыл бұрын
I heard it÷!
@ryanmerlino1003
@ryanmerlino1003 7 жыл бұрын
any chance of doing a roe (fish eggs) mould or a small frog.
@marke.1021
@marke.1021 7 жыл бұрын
Truly wonderful video once again! Nice to see you catching fish as well.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks Mark
@EnriqueSantiagofly
@EnriqueSantiagofly 5 жыл бұрын
Hi Paul. Please whatt is the name of the red plastic for the model?
@naczelny2
@naczelny2 7 жыл бұрын
Excellent Paul
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks
@dercoellner
@dercoellner 7 жыл бұрын
Great Video. I will try it. Thanks 🎣🎣🎣
@Rob-zq8sy
@Rob-zq8sy 7 жыл бұрын
So who's idea was it first to use the lego, yours or Mikkos? Wasp grubs, wax worms, lob worms maggots? Have you tried soaking them in a worm extract?
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
Rob I do not think it was either of our idea. It has been around for longer than both of us M
@dadragonfireoutdoors5642
@dadragonfireoutdoors5642 7 жыл бұрын
I would like to see a shrimp style mold. Although I don't know if there are any fish that would eat it where you're at.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
shrimps would be good for the sea and maybe sabiki rigs but it might be a long time before i get near any salt water again
@mrbilky
@mrbilky 7 жыл бұрын
As always great video you have a true talent Paul keep up the good work!
@ryannlarge8414
@ryannlarge8414 7 жыл бұрын
I'm a bit late to the party but you should try to recreate the grassminnow by ecogear. I've had pretty good luck drop shotting a translucent gray one.
@Fishingchanneltv
@Fishingchanneltv 7 жыл бұрын
always great to see your vids
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks i have just subscribed to your channel
@Fishingchanneltv
@Fishingchanneltv 7 жыл бұрын
wow, that means alot to me :) btw I talk in Portuguese but all my videos have English subs (that take me soooooo long to make :P )
@droolian01
@droolian01 7 жыл бұрын
Fishing Channel
@rexjonhdeer8180
@rexjonhdeer8180 7 жыл бұрын
Nice video as always!!! What reel was that at the end of the video that you have mounted on your rod? Thanks
@jbender1024
@jbender1024 7 жыл бұрын
would love to see you attempt a craw fish mold???
@twonscott1750
@twonscott1750 5 жыл бұрын
What is that beat that you got in the beginning of your video on this one
@danwillis2671
@danwillis2671 6 жыл бұрын
Your work is amazing.
@patrickcavanaghkilmartin
@patrickcavanaghkilmartin 7 жыл бұрын
Love your videos, how would you make a paddle tail lure for Pollack & Bass? I've just noticed, you've already done it.
@judyfrancisco936
@judyfrancisco936 7 жыл бұрын
That was GREAT I love it . thank you.
@airbornefishing4871
@airbornefishing4871 7 жыл бұрын
You should try making a fluke lure like glup great videos
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks, i fancy a fluke
@user-wo7rp6bc6t
@user-wo7rp6bc6t 7 жыл бұрын
great video. would like to see you use it.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I did, i am not sure if you want more detail of how i use them
@MatthewRizzi
@MatthewRizzi 7 жыл бұрын
You make awesome videos
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks
@raveblade7571
@raveblade7571 7 жыл бұрын
Can you possibly try and make a lizard shaped bait I have a few in my garage bit it would be very intestine to see how you would make one
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yes lizard is on the list, cheers
@raveblade7571
@raveblade7571 7 жыл бұрын
cheers
@jsf4star891
@jsf4star891 7 жыл бұрын
Great video Paul. I think I May give this molding process a try. Maybe you could try to make a Sushi Whip Tail Grub 2.0.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i did think about that because I got a lot comments about it being only "half a lure" but wanted try the simplest thing first and work my way from there thanks
@CarterLiftsNow
@CarterLiftsNow 7 жыл бұрын
Love these videos
@wildnatureadventure5489
@wildnatureadventure5489 7 жыл бұрын
Great video how about a menow made from rubber greetings from Luxembourg
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i will be doing some little minnow type shad
@colsoncustoms8994
@colsoncustoms8994 7 жыл бұрын
That's really neat.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks
@1dowsey
@1dowsey 4 жыл бұрын
Genius sir pure genius
@characterlures2377
@characterlures2377 5 жыл бұрын
Maybe you can make some tube jigs
@ovuvuevuevueenyetuenwuevue7469
@ovuvuevuevueenyetuenwuevue7469 7 жыл бұрын
Nice video but i have a little problem! I hope you can help me i have a fishing rod but my tip eye is starting to crack:( and i don't have these rod tips i only have the eye rings do you know how i can repair it with the right eye ring and what kind of glue do i need hope you can help me out💪
@kolamastu
@kolamastu 7 жыл бұрын
Nice vid. How about making a crawfish jig?
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yep i will tackling a creature bait, we don't get many craws or crawfish up here
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yep i will tackling a creature bait, we don't get many craws or crawfish up here
@hockey-rw5600
@hockey-rw5600 7 жыл бұрын
Those would work great for trout
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yes, i have done some droop shorting for trout with small worms
@richardgreen137
@richardgreen137 5 жыл бұрын
Between snot and chewing gum. Hilarious Good job on the mold.
@TrensdePesca
@TrensdePesca 7 жыл бұрын
Parabéns por mais um vídeo de qualidade!
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
9/5000 Did you mean: thank you obrigado
@coloradodirtbike5930
@coloradodirtbike5930 7 жыл бұрын
How about a frog bait or a grass hopper
@yeti1769
@yeti1769 7 жыл бұрын
You should make a poper
@13BCH
@13BCH 7 жыл бұрын
Great video , I love to watch your video's just brilliant 😉😉😉😉😉😉
@jetx2710
@jetx2710 7 жыл бұрын
Love it make crawfish, flys,mouse, or something fun:)
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I think i do need some of the fun element, thanks
@DANNMANN18
@DANNMANN18 7 жыл бұрын
Awesome stuff id love to see a 4 inch flick bait with this same method. Thats somthing i would try to duplicate☺
@hmmmkok8540
@hmmmkok8540 7 жыл бұрын
can you make a lure made of ice cream stick??? please🙏🙏🙏
@Rayne208
@Rayne208 7 жыл бұрын
If I had that capability I'd be making a bunch of little maggots or spikes or whatever you like to call them over there it would cool to see them made
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I do need to make a multi cavity mould next as i do not think making maggots one at a time would be fun, thanks
@anthonymassaro3319
@anthonymassaro3319 7 жыл бұрын
crawl mold would be nice
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
yes, thanks
@MurrayCrabbFishing
@MurrayCrabbFishing 7 жыл бұрын
Love your videos mate, Im looking into making a few lures and there are NO better videos on the subject on youtube.
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
cheers, there are lot of doing them now so that is a real compliment
@fesakondrej
@fesakondrej 7 жыл бұрын
nice video again, thank you Paul :)
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks
@fuski23
@fuski23 7 жыл бұрын
nice, now to set up a mold to pop out 10 at a time
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thst is the plan for the next vid as one at a time is a bit slow
@dragoncracker
@dragoncracker 7 жыл бұрын
could try a lizard pattern
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
maybe, thanks
@DexterBDP12
@DexterBDP12 7 жыл бұрын
would love to see a shrimp for saltwater, legs may be too much of a challenge though
@martinpaul6146
@martinpaul6146 7 жыл бұрын
DexterBDP12 if a section of mono was placed inside of leg when pouring would this provide support and stiffness required for legs?. Worth a try.....
@jettyratflorida5917
@jettyratflorida5917 7 жыл бұрын
Big musky swimbaits. Like BIG soft plastic around 6-8 inches
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
that is a big challenge but something i am looking at for the future
@sergiyomelchenko120
@sergiyomelchenko120 7 жыл бұрын
просто, но гениально!
@TheSaitinho
@TheSaitinho 7 жыл бұрын
nice video, ty for share!!
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
thanks
@razvanburada1648
@razvanburada1648 7 жыл бұрын
Nice!
@payaubandar7508
@payaubandar7508 7 жыл бұрын
Nice job there man, mind if i have some of ur soft palstic😂😂😂
@allsnaggedup7922
@allsnaggedup7922 Жыл бұрын
Make a hellgramite
@davidhelmedrummer2004
@davidhelmedrummer2004 7 жыл бұрын
He should do a duck lure making video. Like if you agree
@kalenmclemore2048
@kalenmclemore2048 7 жыл бұрын
U should make a swimbait
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
i will be getting back to swimbaits at some point maybe in the winter, thanks
@carbscustoms
@carbscustoms 7 жыл бұрын
make a mold of that fish u caught
@joaopacheco8966
@joaopacheco8966 7 жыл бұрын
make som craws and senkos
@aaronsfishingandoutdoors2344
@aaronsfishingandoutdoors2344 7 жыл бұрын
I would like to se a soft plastic lizard
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
I do fancy making a lizard, but i am not sure what i would use it for, maybe slow moving winter pike, thanks
@aaronsfishingandoutdoors2344
@aaronsfishingandoutdoors2344 7 жыл бұрын
I fish in the us and there are some small jacks in the river I fish and they seem to be aggressive enough to bite them. I have came to the conclusion that Jacks are a lot similar to other predator fish like a bass
@aaronsfishingandoutdoors2344
@aaronsfishingandoutdoors2344 7 жыл бұрын
Thanks so much I admire your art
@joaopacheco8966
@joaopacheco8966 7 жыл бұрын
do a big swimbait
@jamesluck1045
@jamesluck1045 7 жыл бұрын
kicker tails
@adampasquale4599
@adampasquale4599 7 жыл бұрын
L i k e !
@darrackmccrea9761
@darrackmccrea9761 7 жыл бұрын
Micro minnows
@PaulAdamsTheHandmadeFisherman
@PaulAdamsTheHandmadeFisherman 7 жыл бұрын
good idea
@Troutfishingmaniac921
@Troutfishingmaniac921 7 жыл бұрын
Mayfly
@critz-austin1043
@critz-austin1043 7 жыл бұрын
Second
@critz-austin1043
@critz-austin1043 7 жыл бұрын
Third
@critz-austin1043
@critz-austin1043 7 жыл бұрын
First
Making bulk soft plastic baits and Resin injection moulds
10:16
The Handmade Fisherman (The Handmade Fisherman)
Рет қаралды 69 М.
Making a soft plastic fishing lure, The whip tail grub and injection mould
14:18
The Handmade Fisherman (The Handmade Fisherman)
Рет қаралды 101 М.
Hand-Pouring INJECTION MOLDS...Soft Plastic Lure Making
26:41
World's Worst Fishing
Рет қаралды 45 М.
Making a Silicon Mold, Cheapest and Fastest Mold Copy  #silicone  #moldmaking
18:40
Engineered Angler Lures
Рет қаралды 45 М.
Making FISHING LURE MOLDS with PLASTER - easy and fast
13:44
StartFishingToday
Рет қаралды 90 М.
Make your own soft plastic molds
15:30
Roland Martin Outdoors
Рет қаралды 61 М.
If I Started Making Soft Plastic Baits in 2024, I'd Start Here!
12:51
Matt Luna Fishing
Рет қаралды 42 М.
Swim bait molds out of plaster of Paris
9:46
OBX Surf and Sound Fishing
Рет қаралды 3,3 М.
Making a Hand Injector for soft plastic fishing lures
9:35
The Handmade Fisherman (The Handmade Fisherman)
Рет қаралды 69 М.
Making Aspirin into Picric Acid (TNP)
12:31
Apoptosis
Рет қаралды 148 М.