Hand-Pouring INJECTION MOLDS...Soft Plastic Lure Making

[@WorldsWorstFishing]

Which were your favorite?? Thanks for watching!

[@minus_IT]

The first ones that you made were great!

[@chriswren3636]

Black and green then the last ones turned out awesome. Should try some black and orange they should swirl great

[@landonwest4701]

Swirled senko was awesome! So much could be done with that

[@bradleyflowersoutdoors6218]

That laminate attempt looked really cool along with that brighter green second run

[@lelandhenryfishing4870]

Definitely liked the worms.

[@ОлегТокарев-е4ю]

*I used to fish with a Crippled Killer growing up in the 50/60’s and **enjoyable.fishing** recommend think this lure gas a smoother propeller action. It is a great surface lure.*

[@garrettswanson6502]

the first worms with the dead on plastics lime look like wood grain, really cool looking

[@WorldsWorstFishing]

Yeah u are right about that

[@glennluteraan4434]

I'm really happy you showed that this can be done. It allows newbs, like me, that you can start small and work your way up to investing in the injector, but that the injection molds are not useless without an injector. Good stuff!

[@WorldsWorstFishing]

certain ones work well

[@phrogginator]

It’s spike from Instagram just wanted to say thank you again for the recommendation and all the help

[@WorldsWorstFishing]

Thanks for watching!

[@michaelwolthusen8293]

Great insight for beginners as well as the most experienced bait makers out there.

[@UWPcustombaits]

You inspired me to buy my first mold and I got some dead on plastic on the way, can't wait to catch a fish with a bait I made myself!

[@WorldsWorstFishing]

helllllll yeah

[@zootycoon246]

I’ve been doing it for three years now! It’s still addicting!

[@01Brever]

Always entertaining buddy! I like the black and green worm the too. The one with more green than black is my favorite! Can’t wait until the next video. Appreciate ya!

[@WorldsWorstFishing]

Thanks man...

[@williammitchell9300]

Really Great Show Chris and the Green was the Bomb Love the way the Blood line Show up , Tight Lines My Friend

[@WorldsWorstFishing]

hey thanks bud

[@pimpshack81]

You’re a mad scientist .. but killing it 🤘🤘🤘

[@WorldsWorstFishing]

thx preston

[@kennethc5223]

Interesting way to do it. Green and black but liked that blue color turned out nice. Thanks for the lesson.

[@WorldsWorstFishing]

thanks for watching

[@hunnerhall2322]

Watching these videos made me get into soft plastic making

[@WorldsWorstFishing]

so glad to hear!

[@MrMarrok657]

since i use more swimbaits than anything, i’m probably gonna order those top fill swimbaits. i got some neat colors in mind. the dead on pink with their green. both those colors work in my waters and should make for an interesting mix. another brilliant video man loved it!

[@WorldsWorstFishing]

It's an awesome mold..he has it in 4,5 and 6"

[@MrMarrok657]

World's Worst Fishing now heres a question ive been pondering. would heating the mold up with a torch or other heat source before pouring help the plastic flow into the lower cavities of those worm molds? if it cools down too quickly that could be something to help.

[@gurohyena3649]

Like green and black is my favorite color combo in general so also in baits for sure. I have some really cool silver star shaped glitter that I think would look really cool in a swirled galaxy color scheme. 🤔

[@WorldsWorstFishing]

i wanna get some star glitter ha

[@heyjohnson5535]

That purple and blue looks amazing completely jealous and need to start making my own

[@WorldsWorstFishing]

Jump in!

[@warlockfreak89]

The really bright green was great, it looked like predator blood

[@WorldsWorstFishing]

If it bleeds, we can kill it

[@SmartcastMTG]

I got the opportunity and pleasure to work with Ed Freytag, your videos always remind me of those times haha.

[@WorldsWorstFishing]

Percussionist?

[@SmartcastMTG]

@@WorldsWorstFishing Wrote the rudimental cookbook

[@WorldsWorstFishing]

@@SmartcastMTG I knew I recognized the name! That's awesome sir

[@jimcoleman4558]

The stick worms came out sweet. Gonna definetly give it a try

[@kennycantin3872]

Those last bloodline swimbaits with a black bloodline rather than a green one would make a great baby bass imitation. Great video as usual!

[@WorldsWorstFishing]

yeah big time baby bass!

[@kennycantin3872]

@@WorldsWorstFishing I airbrush hard baits and do a baby bass pattern that looks very similar. Ready to start pouring soft plastics now.

[@TheTrashologist]

I would like to see you trying to catch a fish using the runner for the bait.

[@ryanlynch3418]

Dumb question but how did you do the divider cup for the stick worms

[@jeffs3376]

Have you revisited this and tried to pour some of the harder molds on the hot plate?

[@ndistefano5]

Man that Purple was a cool color, but I think my favorite was that watermelon laminated over the pearl bottom

[@WorldsWorstFishing]

thanks Nick

[@darrinmyland6497]

The second one with brighter green almost looks like wood grain. EPIC!!

[@WorldsWorstFishing]

haha yeah it does!

[@DeChane369]

Those came out great! I really like the bloodline swimbaits. I can't wait for my mold to come in!

[@WorldsWorstFishing]

Good luck!

[@DeChane369]

@@WorldsWorstFishing I'll need it hahahaha. They have to manufacture it before sending it out so I'm willing to bet it may take a full month at the very least for me to get one with all this coronavirus

[@terenceparrish6292]

GREAT IDEA FOR A VIDEO!!!!!! You have answered a question that has been swirling around in my head. I have been wondering if this would work, I have some worms that I want to melt down, and pour into a larger size mold. Do I need to add anything, or can I just do a remelt, of my skinny worms and pour the hot results into a senko mold?

[@informativecontribution2371]

Where did you get that divider for the pyrex?

[@avifreed5243]

Those green and black senkos look killer!

[@WorldsWorstFishing]

they actually came out nice ha

[@avifreed5243]

@@WorldsWorstFishing Those would be destructive by my everglades spot! And those swimbaits!

[@loganbohannon7963]

Can't wait to get my blood line molds in ordered them 2 weeks ago with some other molds from bts and do it molds

[@WorldsWorstFishing]

Hell yeah

[@chriswren3636]

Awesome job on the baits

[@WorldsWorstFishing]

Glad you enjoyed

[@minus_IT]

Awesome! I wish I could find one of those mixing cups.

[@WorldsWorstFishing]

ill do a video on how to make one

[@tracynewman5246]

Good vid I’ve been hand pouring half the mold (sinko) then inject diff colors on top don’t have the duel injector yet it does work just time consuming you could skin pour some of the swim baits then inject maybe a vid as well thanks

[@youroutdoors5453]

Have you ever tried to pour side walls on the blood line series then inject it to add another layer element as well as another color?

[@landonwest4701]

Awesome video! I am so pumped up and excited to start hand pouring some of my molds! Would pouring in a hot mold or on a hot plate help? Maybe worth a shot. Keep it up man! 👍🏼

[@WorldsWorstFishing]

Extra heat never hurts

[@kevinlincez7288]

After watching some of your videos, and then the way you started this vid, I was thinking about a weird injection method- using a top down bait mold and using the double injector you would slowly spin the mold while injecting the plastic getting a barber pole type pour. Prolly useless for fishing but would look really cool, if possible.

[@WorldsWorstFishing]

it doesnt swirl the way you think it will

[@kevinlincez7288]

Damn!! But it woulda been cool

[@JWard-sp7wt]

I wonder how little squeeze bottles would work with drawing patterns on skin pours, would it work like a pen?

[@WorldsWorstFishing]

no idea

[@gavinware1039]

where did you get your finesse crawler injection mold?

[@cloudy7773]

Beautiful baits but I Was wondering if you heated up your molds if the plastic would flow further into your molds

[@WorldsWorstFishing]

it probably would..but wanted to show that you can do it without the heat

[@lelandhenryfishing4870]

Would heating the molds on the griddle help get the plastic into the smaller appendages?

[@Tam58851520]

Chris, I'm curious if you got the griddle out and pre heated the frog mold .. would it work better? Could you do punch bugs with a heated mold? Awesome video as always, thanks for the knowledge and entertainment.

[@stevenreep385]

Wonder if you can put it on a hot plate like you do the open pour swimbaits and keep the plastic cool enough to finish those finesse worms you had? Just a thought

[@WorldsWorstFishing]

it might help for sure!

[@averybrown7878]

Have you ever looked at a milk frother to mix up pigments??? The knife method looks good but the milk frother would be good to mix it up quickly if you were in a rush

[@averybrown7878]

It might add too many bubble though... not sure but it’s worth a try!

[@bomoaccavallo7924]

love those green ones

[@audreydamours6226]

question like that .. im a machinist and im planning making a mold for stick worm .. but for hand pouring i will cnc my worm at a 30% angle soo it will be easyer for the plastic to flow all the way because i will not use pressure like injection .. is that a good idea ??? sorry for my english

[@DeeDee-vu5mi]

Great vids as always. I have the AI 4in swimbait with top injection ports for each. I still have issues getting this mold to laminate properly. Great single color baits with the eyeball mold though.

[@danielwood2134]

Loved the green swirl but I thank i like the swim baits better

[@WorldsWorstFishing]

Good choice!

[@jhgadventures]

I like those first ones alot. I'm ok with the black swallowing the green a bit. More of a natural feel.

[@justinsteele5665]

That blue in a core shot with the clear and copper flake that be a pretty bait

[@WorldsWorstFishing]

dude a great idea!

[@justinsteele5665]

@@WorldsWorstFishing just waiting on the video🧐

[@nicolewilkes4625]

What brand plastic do you use? Also for the senkos do you use soft or medium?

[@spencerdavis1341]

keep it up and you might not get your laundry done for you much longer 😅 nice baits tho thanks for demonstrating the potential for this method!

[@WorldsWorstFishing]

hehe

[@kennethbrown3853]

Would love to see the hand pour in a morning dawn to see how it turns out

[@WorldsWorstFishing]

i love morning dawn

[@kennethbrown3853]

@@WorldsWorstFishing One of my favorite go to's

[@dakota2600]

How do you get weight in your senkos I make my own but no matter how much salt I use they don’t like to sink

[@TimIrvin]

I grew up fishing a GRAPE curly tail worm - 6". I had so much confidence in them. I could ALWAYS catch a fish. ALAS, it seems that GRAPE has been lost forever. The purple you used reminded me of it but it's not GRAPE!

[@WorldsWorstFishing]

you can get black grape color and use it lightly and get an old school grape worm..give it a try!

[@rossestep338]

It looked my the liquid pigment in the first worms was extra thick at the beginning, maybe that’s why there was a green piece left. Also, you should use one of the marbled pour spouts that you typically remelt to try and catch a fish! Haha

[@WorldsWorstFishing]

yeah would be a fun challenge

[@kbody_slade]

I would like to try Texas rigging the runner

[@WorldsWorstFishing]

yeah might work

[@benfisher8863]

What combo block do you use?

[@WorldsWorstFishing]

angling ai c block

[@BartonHNewell]

The ones at 19 minutes have a super familiar feel to an old Senko-style bait I use to fish that was more of a mustard yellow/ watermelon "cow" pattern. Super killer to fish weightless wacky rigged.

[@WorldsWorstFishing]

sounds like an old school color no doubt

[@timwalker6856]

Why are my hand poured baits cloudy. Is it the release agent or just the mold. Player of Paris mold

[@1222harv]

Could you put the frog mold on the heating plate?

[@WorldsWorstFishing]

might help a little but gravity will prevent it

[@selfr50]

Cool man. I pour my injection molds!

[@WorldsWorstFishing]

Right on

[@jeremynewhouse6530]

Would heating the molds and maybe angling them so the plastic runs down hill in the worms help. Just a thought I had while watching

[@sladojt0537]

I want to start soft bait making but don’t know what the total amount I would need to buy all the things I need

[@hannable3871]

I can tell you not to use the microwave in your house it smell like hell and I wouldn't recommend using it for food after it will taste like hell also. But really it dose take a hole lot I carved a swim bait out of some balsa wood and made a mold with silicone mold with stuff from hobby lobby and poured with old plastic bait that were junk. You should check out marling baits on KZbin make almost all his own stuff it's real cool.

[@cauyrodenbaugh938]

Thank you answered my question I’m just starting and was gonna wait to buy a injector because of how expensive they are thank you

[@WorldsWorstFishing]

Glad I could help

[@BaltaPescayAventurasElTataBelo]

tnku master i have learn so much whit your videos very soon i will have my Mold to directly from eangling AI and Deat on Plastic

[@bluemaixma04]

Whats a good start up kit out there

[@lawrenceglr]

What temperature would u recommend for the Plastisol to be at while hand pouring injection molds?

[@Scott___T]

Does it matter which way the measuring cup is held when pouring compared to the direction the plastic is flowing? If parallel; less color mixing? Perpendicular; more color mixing?

[@WorldsWorstFishing]

it probably does...im still learning of course

[@815aquariumfish6]

Great video where did u get that cup Divider at

[@johnzambito7389]

Love the baits!! I would love to be able to buy some!! Where do I get them?

[@chrisdorn6418]

Love the PataFlaFla Awesome LOL

[@WorldsWorstFishing]

Once upon a time I could lay the chops down LOL

[@joebarker9339]

is the bath just water to cool them down ?

[@Jacob..m]

19:30 googan should make that color in the lunker log because it is there colors

[@pikeevans8559]

What would happen if you preheated your mould just before you poured the frogs?

[@coolgrant100]

Hands down the swimbaits were sweet, I fish a lot with a lot of friends if you have spare baits and random stuff I’d like to buy a variety pack. I’m sure you have bunches laying around I don’t mind paying for a box of variety it would be cool to try some of your stuff out along with the crazy and cool colors.

[@jamesmalone7773]

Have you thought about warming up the molds when you are hand pouring?

[@WorldsWorstFishing]

I do that every time when I am pouring an actual open pour mold

[@henrybarber7087]

Hand pouring can also take tones of bubles you stir in

[@brycehodapp6144]

Make a video on the colors bluecrawl or pb&j

[@WorldsWorstFishing]

ive done both! check em out

[@liprippertv3956]

You should do the black and green in a craw bait

[@mre4875]

Kinda weird at how fun that was to watch. Gonna make for some weird re-melts too.

[@09ChiefMaster]

Wouldnt it be better to have the molds on the griddle to help it flow?

[@claytonhiland9518]

Chris bring your molds up to temp before pouring. Should work fine.

[@karlstevens6006]

Chris, how long do you put your plastics in the bath?

[@johnbrown3397]

Number 1 is there a way i can buy baits from you and 2 how do you retrieve a split tail swimbaits

[@thomashowes1973]

Why not preheat the molds on your hot plate to get the plastic to flow further on the molds with more limbs or pockets?

[@Butchertypes]

Where can i buy a whole bucket of soft plastic?

[@kirkamerson2756]

Thought they were all pretty cool.

[@WorldsWorstFishing]

thanks kirk

[@MrArcher0]

If you spun a two part injector on top of a mold would it turn out like a candy cane?

[@WorldsWorstFishing]

it does not

[@davidbonnee4566]

what do use to divid the cup

[@kollmesser9537]

You should use the runrr as a bait

[@lukeanderson2939]

Where can I get the first mold

[@Joseph-hi3cy]

Maybe heating up the mold with a heat gun before pouring? Idk I’ve never done this. I plan on it.

[@cuzimnik25]

Watched a video where someone hand poured injection molds and had like a small plunger to put pressure in the sprue for a second. Then tops it off.

[@WorldsWorstFishing]

very neat

[@m_englund7574]

If you crack the molds in half and then hand pour you can get a laminate, if you have say something like a frog mold with thin legs you could pour a belly color then inject the rest

[@WorldsWorstFishing]

oh yea...used to do that some..have to get the mold really hot to get a decent bond doing that tho

[@riccochet704]

when you put those first baits in the water the contrast popped....at least thats how the camera picked it up

[@WorldsWorstFishing]

it does that...always better in the water!

[@vagoart3067]

i think your supposed to keep it as still as possible so it goes in evenly and get the green better the other time you shaked little to much mixed basicaly the black with the green on the way in

[@hannable3871]

What would happen if you added extra salt to the green?

[@WorldsWorstFishing]

nothing really..might brigfhten it some

[@AddictedAngler]

I think if green was hotter few degree would over power black , what do u think

[@adamcantrell4431]

Where do you buy the molds and all the other materials

[@WorldsWorstFishing]

angling ai molds and dead on plastix

[@adamcantrell4431]

World's Worst Fishing thank you very much you and marling baits have inspired me to make my own baits and now pour my own soft plastics

[@Oliver1269ii]

Where can i get these molds? and are they available in Europe?

[@lucasstrasser4178]

You should try to catch a fish with the runners