Making super boats at home | Building scrap engine yachts

We invite you to watch the next part of the super yacht project using scrap car engines!
Contact: [e-mail]
Welcome to NASAT Channel!
I guarantee you will not be disappointed with the videos uploaded because there are some of the best videos that no one has done yet.
Thank you and hope you will enjoy and not be disappointed with the time you spend watching my videos.
Support the channel by subscribing to see more great videos!
If you find it interesting, Like, Subscribe and comment on your questions and ideas, the channel will support and create great videos for you.

[@Nasatchannel]

Bạn đang xem phần 1 của dự án siêu du thuyền sử dụng động cơ ô tô phế liệu. PART 2: kzbin.info/www/bejne/m2Gyd6B7iN6tprc PART 3: kzbin.info/www/bejne/l6jYopaMnJinpdU PART 4: kzbin.info/www/bejne/sHnRqmBjaLxsf80 Mời các bạn đón xem phần tiếp theo của dự án siêu du thuyền sử dụng động cơ ô tô phế liệu nhé! We invite you to watch the next part of the super yacht project using scrap car engines! Chế phi thuyền điện từ xốp sử dụng Motor 6000W | Build a boat from electric 8hp foam kzbin.info/www/bejne/gJ2tpmmQa65nY9k

[@YanisLacourt]

00009900990000999090900000000000000090900000000000900000000009009009900909099990999900000000000000900000009000009900000000000000000000000000000090090009009090999090909000990900999999090999000009000000090900000000900000000000000000000000000000000900000000000000009000009990099000000900999909990909909090009900000000000⁰😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅 26:39 😊

[@samvalentine3206]

Good work - awesome results! Nice to make that Subaru engine purr like a kitten again! Can't wait to see it become your super yacht... Will you mate the engine with a transmission to give you reverse for the propeller? Great job! làm tốt lắm! - Làm tốt lắm - kết quả tuyệt vời! Rất vui được làm cho động cơ Subaru đó kêu gừ gừ như một chú mèo con lần nữa! Nóng lòng muốn thấy nó trở thành siêu du thuyền của bạn... Bạn sẽ kết hợp động cơ với hộp số để đảo chiều cho cánh quạt chứ? Bạn đã làm rất tốt!

[@Nasatchannel]

I will combine the Subaru with the transmission so the boat can move forward and backward. I will show you it in the next part, hope you follow and support me. Thank you so much!

[@HungNguyen-nu2cj]

Tuyệt vời, rất mong chờ tập tiếp theo

[@user-ty6by3ku6w]

Надо было головку блока не наждачкой тереть, а об асфальт. Так плоскость точнее будет.

[@user-xn5oi3bf1b]

И на вкладыши олово наплавить😂

[@tonysargent1699]

Astonishing! You are totally amazing! The boat hull is very impressive and that engine is incredible! I can only thank you for sharing your skill and your passion with us and say that I look forward to your next installment!

[@Nasatchannel]

Thank you very much, I will try to do better in the next part. Hope you always support me!

[@mary74724]

(cựu dân cư CÂN GIỜ cảm ơn các bạn...rất tài ba )🧡🧡🧡👍👍👍👏👏👏

[@scottwyckoff5483]

A naturally skilled human being, great job!

[@Nasatchannel]

Thank you so much! ❤️❤️

[@hoale-mx3ov]

Có nhiều kênh làm chủ đề tương tự. Nhưng sản phẩm của anh bạn này luôn gây bất ngờ và khác biệt.

[@Nasatchannel]

Cảm ơn bạn nhiều nha, mình sẽ cố gắng làm tốt hơn thế, mong bạn luôn ủng hộ!

[@edmo43]

Công việc tuyệt vời là thiết kế chiếc thuyền và công việc cơ khí hoành tráng là khôi phục và sửa chữa động cơ. 👍👍

[@Nasatchannel]

Thank you very much, I will try to do the next part as soon as possible, I hope you always support!

[@LinhNguyen-hd5nm]

Lần đầu thấy động cơ xăng như vậy..❤❤

[@Nasatchannel]

Đó là dòng động cơ Boxer á bạn, mong bạn ủng hộ mình nha!

[@LinhNguyen-hd5nm]

@@Nasatchannel rất thích những ý tưởng của bạn chúc bạn nhiều sk

[@Nasatchannel]

@@LinhNguyen-hd5nm Cảm ơn bạn rất nhiều nha!

[@nguyenhuong854]

Quá tuyệt vời !

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@alekssimon3521]

Мойка движка очень понравилась! Особенно когда вкладыши высыпал в тазик настроение сразу поднял😅

[@Nasatchannel]

❤️❤️

[@user-mw1qn2cy9c]

Это сарказм. Видео о том как не надо ремонтировать двигатель, тем более субару🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 @@Nasatchannel

[@AJRestoration]

Us - How much did you torque the head bolts? Him - yes Great stuff, I use the same torque specs on most of my restorations.

[@Nasatchannel]

Thank you very much, I will try to do better!

[@BuildItTuneItEV]

Came here for this.

[@Nasatchannel]

@@BuildItTuneItEV Thank you!

[@ferrykaldewaaij5494]

Impressive skills, great video!

[@Nasatchannel]

Thank you so much!

[@abcdefghijkmnkp]

👍👍👍👍👍👍👍عااااالییی

[@Nasatchannel]

❤️

[@anthanhnamfishing6294]

hóng clip hoàn thành

[@Nasatchannel]

Cảm ơn anh rất nhiều, em sẽ cố gắng làm nhanh nhất có thể.

[@guillermobrandt291]

Spectacular work and assembly, congratulations! Waiting for the second part 😃😃 Greetings from Argentina

[@Nasatchannel]

Thank you very much, I will try to do the next part as soon as possible, I hope you always support!

[@raymondmelly6576]

fair play to you a great job

[@Nasatchannel]

Thank you so much!

[@Jonathan.D]

Can't wait to see the second part to this one. You did a great job on that engine rebuild! I do worry that it will not have enough power for a boat that large. Have you seen a fishing boat from Japan? They have a great style. I think you could copy it to make a really awesome boat! Keep up the good work!

[@Nasatchannel]

Thank you very much, I will try to get the next part out as soon as possible. This engine is quite small compared to the boat so the boat will not reach high speeds

[@kevinpeters1780]

​@@Nasatchannel If it is the 1800cc subaru boxer google say 260 hp ?

[@Nasatchannel]

@@kevinpeters1780 This Subaru ej18 engine produced in 1989 has a capacity of about 110 horsepower.

[@kolgan042]

Под замену как я увидел только поршня и вкладыши шатунные. Когда он “притирал” седла клапанов, я за него порадовался до слез.

[@Nasatchannel]

Спасибо большое, я сделаю лучше.

[@thienduong2543]

Hay quá ❤

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@phongdiy]

Kênh vẫn rất tuyệt vời

[@Nasatchannel]

Cảm ơn anh rất nhiều nha!

[@ralikdiver]

Amazing video as always. Super impressed with such a thorough engine tear down, cleaning and rebuild. Can’t say I’ve seen better.

[@Nasatchannel]

Thank you very much, I will try to do better, I hope you always support!

[@williamscoggin1509]

It is a real joy to watch you work.😊

[@Nasatchannel]

Thank you very much, I hope you always support!

[@krmtvmobilesoundslights4467]

Is that a Subaru Engine horizontal??❤❤

[@Nasatchannel]

That's right, that's the Subaru boxer ej18 engine

[@Mephistopholies]

If all the videos on this channel are the same dude; WOW! Got to be the coolest guy in SE Asia... The track Play dead by Neffex is fire!

[@dieuhuynh1901]

Máy lạ quá

[@Nasatchannel]

Loại động cơ Boxer của Subaru đó bạn

[@allaneduvije285]

good job

[@Nasatchannel]

Thank you so much!

[@paulshamblin6260]

I love it. Subaru or Toyota? Love to see someone with minimal tools and maximum skill do something with nothing. Great job!

[@Nasatchannel]

Thank you very much, it is a Subaru ej18 engine, I hope you will always support me.

[@rodneyhoadley3167]

I think we missed part 2 through 9

[@hainguyen8610]

động cơ boxer nổ phê thiệt

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@ViktarPisarchyk]

What engine is that? looked like a Subaru until you put a carburetor on it

[@Nasatchannel]

It's a Subaru engine, but it's had its fuel filler changed to make operation simpler. Thank you for your interest!

[@mrMacGoover]

Got to love those Subaru engines, there only flaw is irregular cylinder wear that results in oil blow by.

[@Nasatchannel]

Thank you very much, I hope you will always support me.

[@AdaywithJoe]

Excellent, one thing, when you're feeding water to engine with a water hose , the feed direction is from bottom up, not through the thermostat housing. It exits the thermostat housing. Great channel 👏

[@Nasatchannel]

Thank you very much, I will try harder and hope you will always support me.

[@888WulfDog888]

I love how the torque settings seem to be measured by "elbow clicks" 😂 not sure I would risk using an engine that's not been factory spec torqued up in a boat myself but go for gold!

[@Sangtaonasat]

🇻🇳❤️

[@upsidediy3945]

Seems like he built this boat for a music video. Good job....15:51...The engine looks super clean.

[@ragedaspric1373]

Nice idol galing naman po

[@Nasatchannel]

Thank you so much!

[@MrArdeqboy]

Amazing work and assembly, congratulations! Waiting for the second part 😃😃 Greetings from Malaysia

[@Nasatchannel]

Thank you so much!

[@simonallan9941]

Isn't it worth putting in new piston rings and conrod bearings, since they are so cheap compared with the labour, and its apart anyways, its not going to run any different that you will notice by just cleaning and painting the engine, and especially for marine purposes it should definitely have new bearings and rings, but awesome videos I wish I could watch it all day, and I would love to do that myself if I had the opportunity, thanks kindly for sharing your great experiments and skills.

[@user-us2jv9cm2x]

Очень понравилось видео, настоящий мастер! 👏

[@ferryferry1015]

Blasting👍

[@Nasatchannel]

Thank you! ❤️

[@noelbaguioocampo9168]

Part 2 please

[@Nasatchannel]

I hope you will always support and follow me. I will release the next part as soon as possible, thank you.

[@user-cn9iy4xi4v]

Беллисимо

[@johnpartridge7623]

I never thought that Super Glue & 1 Ply would be Included to make a Boat-but I was wrong, good job mate 👍👍👍

[@diegorodrigues9059]

Nossos irmao asiatico tem um dom incrivel mano!!!! Bcs conseguem reparar qualquer coisa ne 🙌👏👏👏👏👏👏👏👏✋

[@vitalyizvv1632]

Друг приветствую тебя. Ты строишь по проэкту или выдумывает сам?

[@josevirginioesilva4378]

muito legal

[@Nasatchannel]

❤

[@tomovylog640]

Bác cho mình hỏi 1m² cho 1 lốp composite thì tốn bao nhiu keo ạ. Mong đc truyền thụ kinh nghiệm ạ.

[@Nasatchannel]

Còn tuỳ thuộc vào bạn dán loại sợi nào nữa nha, nếu loại sợi mỏng max300 dán bề mặt phẳng thì khoảng nữa kg keo ạ.

[@tomovylog640]

@@Nasatchannel cám ơn bác nhé. Còn loại dệt thì khoản 1 ký trên 1m² k bác.

[@tomovylog640]

@@Nasatchannel giống loại bác làm á.

[@Nasatchannel]

@@tomovylog640 loại dệt Roving 360 thì cũng khoảng nữa kg thôi bạn. Còn loại trong vd roving600 phải dán ướt keo hơn 1kg mới ngấm hết sợi được nha bạn

[@tomovylog640]

@@Nasatchannel cám ơn bác rất nhìu ạ.

[@MAMOGAG]

凄いなぁ～　EJ18 エンジンをDIY で組み上げるなんて素晴らしい！　しかもデスビで回してるし！

[@noelbaguioocampo9168]

How much your total cost In this boat.?

[@jonnyskray3000]

Nice job!

[@Nasatchannel]

Thank you so much!

[@user-ty6by3ku6w]

Собирать мотор Subaru без динамометрического ключа бред. Блок очень пластичный, если перетянуть мотор будет клинить при нагреве.

[@Nasatchannel]

Спасибо за отзыв, буду учиться на вашем опыте и становиться лучше.

[@khanhluu6668]

Đẳng cấp luôn!

[@ryanjohnson1814]

What engine is that ? Make model ? Definitely you are building bigger boats now. Cool

[@Nasatchannel]

It's a Subaru boxer Ej18 engine, thank you for your interest!.

[@utemnguyen9783]

a nên bịch khẩu trang 2 cai va đeo kính cho an toàn anh ạ ,vì mạt của lưới và keo khá độc .chúc anh thành công và nhiều sức khỏe

[@Nasatchannel]

Cảm ơn bạn rất nhiều nha, mình sẽ kĩ hơn. Mong bạn luôn ủng hộ mình nha

[@deosiewilson732]

Very interesting video ... i enjoy watching your work, you boys have excellent skills

[@Nasatchannel]

Thank you so much! ❤️

[@tarciliobeneditodasilvafil3921]

Aguardadndo próximo video, esse está ok

[@Nasatchannel]

❤️❤️

[@upikabuh2679]

Amazing...saya terkesan dgn cara anda merestorasi mesin ini..Luar biasa. Apakah itu Bekas mesin mobil VW ??

[@Nasatchannel]

Thank you so much! Subaru ej18 engine ❤️

[@carlosrodrigues1467]

Para colar assim essa cola deve ser milagrosa

[@Nasatchannel]

A cola de poliresina e fibra de vidro é uma combinação perfeita, é amplamente utilizada em barcos e construção.

[@joinis_story7260]

Ok bos👍🔔⭐⭐⭐♥️

[@Nasatchannel]

Thank you! ❤️❤️

[@datxuaVlog_Mito]

Quá đẳng cấp rồi 😊

[@Nasatchannel]

Cảm ơn anh nhiều nha, cũng đang hóng chiếc của anh!

[@datxuaVlog_Mito]

@@Nasatchannel chiếc của mình nặng nề, mà máy yếu chạy không đi đâu bạn ơi

[@Nasatchannel]

@@datxuaVlog_Mito Làm đam mê mình từ từ nâng cấp sẽ hấp dẫn hơn anh

[@datxuaVlog_Mito]

@@Nasatchannel OK cảm ơn đã động viên nè, hả bạn ở gần mình đến học hỏi rồi haizz

[@Nasatchannel]

@@datxuaVlog_Mito Kinh nghiệm của em chưa nhiều lắm đâu anh. Chiếc này của em cũng không định hướng cho chạy tốc độ vì em không có máy đủ mạnh nó mà chạy được 30km/h là mừng rồi

[@TrungHieu-nv7sz]

Sao phần 2 lâu vậy a zai

[@Nasatchannel]

Chiếc này lớn nên rất nhiều công đoạn, mong bạn thông cảm nha. Mình cũng đang cố gắng làm nhanh nhất có thể

[@TrungHieu-nv7sz]

@@Nasatchannel chúc a sk và gắng thành công chiếc thuyền nha a

[@Nasatchannel]

@@TrungHieu-nv7sz Cảm ơn bạn nha, mong bạn luôn ủng hộ mình!

[@TrungHieu-nv7sz]

@@Nasatchannel làm tới đâu r a zai

[@user-we6se3kp4i]

quá đã

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@lagopeter]

Brilliant layout of the entire engine 👏 👌 👍 🙌

[@Nasatchannel]

Thank you so much!❤️

[@user-vc6zz3iz5l]

Keo đấy đất ko bác

[@Nasatchannel]

Keo và sợi composite giá hiện tại khoản 50k 1kg tùy nơi bán nha bạn

[@0dbm]

Always been a dream of man Beautiful work , thank you

[@Nasatchannel]

Thank you so much!

[@samuelrasnake227]

can someone please tell my what on earth is the super instant adhesive this guy is using...the product name...and where can i get about twenty liters

[@Nasatchannel]

It is a polyester and fiberglass glue that is widely used in construction beams and boats. You can buy it at construction stores.

[@user-zd3zi6lk2x]

This dude has wicked skills ! It definitely isn't his first rodeo !

[@iainball2023]

Nice job, but a pro tip. Swap your battery impact for a torque wrench. 😂

[@Nasatchannel]

Thank you so much!

[@Omphitbodoh69]

Wooow...good and best worker brother. Godbless you and getting better.❤❤❤

[@Nasatchannel]

Thank you very much, I hope you will always support me.

[@terrywarner8657]

Great camera work and production coordination at 16:10 to add the parts during the pan right.

[@Nasatchannel]

Thank you so much!

[@brian7940]

Can't wait to see what type of exhaust manifold you will run.

[@Nasatchannel]

Thank you very much, I hope you will always support me.

[@jeanlawson9133]

Awesome 👍 you have skills to pay the bills..... Impressive 😎

[@Nasatchannel]

Thank you so much! ❤️

[@Fleischmann773]

"Free"

[@user-yc3em8qx2p]

Excelente profissional 👍

[@Nasatchannel]

❤️❤️

[@MRdus22]

nice❤

[@Nasatchannel]

Thank you so much!

[@user-vr3mc1tr9r]

На*ера нам стапель? Какой такой мидель-шпангоут? Центровка? Не утонул и ладно. Чуть косо держится на воде и ведет в сторону- "и так сойдёт! А винт какой - тяжелый или легкий? - Да бросте дорогие зрители. Трудолюбивый народ. И за свой труд заслуживает- " Лайк".

[@Ogsonofgroo]

Build on the engine, sounds beautiful, is this going to be a long-tail? Quite enjoyed this video, but please you guys gotta stop washing parts with bare hands though, trust an old idiot who's hands are not so good. We store popcorn in anticipation of seeing the final build, nice light lay-up on the hull + a screaming little motor and that craft should scoot right along, I thought the hull build was pretty brilliant and could be applied to many different designs, very nice imho. Cheers from PNW Canada!

[@Nasatchannel]

Thank you very much, I will try to do the best I can, hope you always support me.

[@kevinpeters1780]

@Nasatchannel I have a VW 2000cc boxer engine in my garage and i would like to put it in a boat like yours! I will try making one! But where is the exhaust manifold? I didn't see iton the videos featuring the engine. Unfortunately it is rated at about 80 hp. I would like to turbocharge it.! Thanks for the videos!

[@Nasatchannel]

Thank you very much, I will do it in the next part, hope you follow and support.

[@imridingwithstoopidohwaiti3948]

Cool project but I cant believe you reused the rings and bearings after doing all that work..

[@terrywhite3952]

You sure make it look child's Play, great work!!!

[@eldeld7272]

Суперклей - величайшее изобретение человека.. не удивлюсь если этот малаец планирует слетаиь на луну..

[@Nasatchannel]

Большое спасибо, я вьетнамец и надеюсь на вашу поддержку.

[@inblue3141]

와우!! Boxer 엔진...

[@Nasatchannel]

매우 감사합니다!

[@user-mf3xn4uo5y]

Quá.lớn😮

[@Nasatchannel]

Cảm ơn bạn nha!

[@user-dp1od9ih2p]

Продолжение жду

[@Nasatchannel]

Спасибо большое, постараюсь сделать это как можно быстрее.

[@markward6076]

The chemical cleaner you use does a good job. What type of solvents do you clean your engine parts with?

[@miketaylor6282]

I seen so many things being done wrong, that I’ll have nightmares the rest of my life.

[@user-ng9ii9ez5r]

Where all the torque spec or torque wrench......

[@khuongnguyen2594]

Bạn oi mình muốn mua lại 1 sản phẩm của ban

[@Nasatchannel]

Sản phẩm mình chưa thử nghiệm qua độ bền và an toàn nên mình không thể bán nha bạn, mong bạn thông cảm

[@bobbysierraVlogs]

A jigsaw, grinder and glue = super boat.

[@Nasatchannel]

Thank you so much! ❤️

[@germanalvarez3785]

Hola, mucho trabajo. Para que tipo de aguas los fábricas???. Laguna?. Rio?. Oceano?. Se ve bien. Saludos!!!

[@luisbatista597]

💪💯😎

[@Nasatchannel]

Thank you so much!

[@UdinNelayan]

Sangat ribet dekali yang merskit mesin nya,bikin kita ribet untuk merskit ulang😅😅😅..sukses selalu kamu benar2 ahli

[@Nasatchannel]

❤️❤️

[@Berbagicara-ku88]

Nice info

[@ericrobles8755]

Te quedó muy bonita tu embarcación bendiciones

[@Nasatchannel]

Muchas gracias.

[@jlions72]

How In the world did you remember how that engine went back together You are Amazing Please share how you do it ?

[@ericrobles8755]

Hola amigo saludos desde puerto rico me gustaría saber cómo se llama la pega q estás usando para pegar la madera gracias

[@Nasatchannel]

¿Te refieres al pegamento de poliéter y fibra de vidrio? Es muy común en embarcaciones y construcción.

[@amerika83]

Оппозитный звук 👍 Россия 🇷🇺

[@rachelshaqlla6046]

Mantap sekali boskuh

[@Nasatchannel]

❤️❤️