👍 Making the Easter Gnome and FREE DOWNLOAD! Last Minute Laser Cut Easter File!

[@merrillalbury8214]

Have a happy and blessed Easter.

[@TheLouisianaHobbyGuy]

Thanks Carl! Happy Easter to you and yours as well! 🐰🐣🐥

[@JeffBenedict]

thanks rich. great work as always... looks awesome.. you left his feet off the painted image.. :)

[@TheLouisianaHobbyGuy]

Yes I did Jeff! 🤪 Good catch!

[@davycrochet9569]

Thank you for everything you do > I have learned so much from your video's. It's easy to tell someone how to do something but, following step by step is the best learning experience . Great Video's. P.S. you make something and, someone want's to say they made it first. Shame on them !

[@TheLouisianaHobbyGuy]

You are so welcome Davy! I really don't care who gets the credit. I just want my viewers to actually be able to make it!

[@TheFalconJetDriver]

Thanks Rich this will be great for my granddaughter to paint!

[@TheLouisianaHobbyGuy]

Have fun!

[@jetorebel8794]

Thank you, great project, my baby girl is painting right now 👍👍

[@TheLouisianaHobbyGuy]

Wonderful! That's when it's the most fun; when the kiddos are involved! Thanks for sharing!

[@shubby751]

Happy Easter Rich, hope you have a awesome weekend 🐰

[@TheLouisianaHobbyGuy]

Happy Easter to you and yours as well! Thank you!

[@sicciful]

that's a nice project to make with the kids for easter thank you for sharing rich

[@TheLouisianaHobbyGuy]

You are so welcome Luc! Thank you for your support! 👍

[@phlyr01]

Thanks Rich for another great design. The better half has been talking about gnomes for a while now and this was a perfect Easter surprise . I'm a total newby and this project start to finish paint was less than 2 hours. She loves it and I'm a hero! Win. Win.

[@TheLouisianaHobbyGuy]

Glad you like it Roger! Happy wife, happy life!

[@dirkroggeveen5764]

Thanx Rich! Happy Easter.

[@TheLouisianaHobbyGuy]

Same to you Dirk! Thanks for watching!

[@makermaniacdiy]

molto bene spiegato, felice pasqua a tutti

[@TheLouisianaHobbyGuy]

Buona Pasqua anche a te e ai tuoi! Grazie!

[@davidelder5399]

Fun project Rich Happy Easter to you & your family

[@TheLouisianaHobbyGuy]

Thanks David, Happy Easter to you and yours as well! 🐰🐣🐥

[@bayfild]

Happy holidays you are the best.

[@TheLouisianaHobbyGuy]

Thank you Bradley! Happy Easter!

[@c.haroldwilliams605]

You are the best. Thanks for sharing!

[@TheLouisianaHobbyGuy]

My pleasure! Glad you liked it.

[@channettecoetzee8827]

Thank you Rich.

[@TheLouisianaHobbyGuy]

My pleasure Channette!

[@LarryDMitchell]

Great video Rich and with the simplicity of assembly I can make a few quick ones today. I love Gnomes and have made some Christmas gnomes with my wood lathe and a couple with my laser this past Valentine's day. This will be a good addition. Thanks for the cut files!

[@TheLouisianaHobbyGuy]

Sounds great Larry! I can make 7 in an hour, plus paint time. 3 hours total. Enjoy!

[@cakpcpp]

loved the video...last minute is better than no minutes..lol

[@TheLouisianaHobbyGuy]

And you can save it for next year as well!

[@albertdrew7235]

Thanks Rich

[@TheLouisianaHobbyGuy]

You got it Albert!

[@Essentialvideophoto]

Hi Rich. Awesome little project just before Easter. Gnome is super addition to my Easter collection, thank you for sharing the file and the way to do it. No brainer with your help. by the way Happy Easter to you and your family. Cheers

[@TheLouisianaHobbyGuy]

Thanks so much Bob! Happy Easter to you and yours as well! 🐰🐣🐥

[@floridalove]

This is a very nice project Rich. Thank you for sharing!

[@TheLouisianaHobbyGuy]

Glad you like it Jürgen!

[@TheLouisianaHobbyGuy]

*I know this is last minute, but this file is QUICK AND EASY to make!* Click on *Show More* above for the direct download! *HAPPY EASTER EVERYONE!*

[@TheCartoons4you]

Awesome! Cant wait to try it! Do you have a link to the camera you use? I would like to help support you in some way!

[@TheLouisianaHobbyGuy]

@@TheCartoons4you Sure! Thanks! This is the camera I use in the office: amzn.to/412VhAu, and this is the PTZ camera I use in the other shop: amzn.to/4385SMB

[@TheCartoons4you]

@@TheLouisianaHobbyGuy Ill def check those out, thanks for such a fast reply !

[@MrCatfarmer]

Thanks. Enjoy your videos. I’m still new with the 20 watt but learning a lot from your videos. And thanks for the download.

[@TheLouisianaHobbyGuy]

My pleasure Danny!

[@georgeheleine5209]

Awesome video and project Thank you for sharing your design file!!

[@TheLouisianaHobbyGuy]

My pleasure George!

[@larrymiller9894]

I hope it was ok to pause the video and take a screenshot of the finished gnome for painting purposes. thanks for the file . great timing.

[@TheLouisianaHobbyGuy]

Yes, of course Larry... that's why I left the photos up at the end.

[@larrymiller9894]

@@TheLouisianaHobbyGuy TY

[@muppetarms8406]

"Hi Rich I'm looking back at your video on "Take your Laser Engraving to the Next Level with a Simple Trick!" and wondering if that would be a nice way to have a panel of acrylic with a fine vainer on it? It will be a just a three paragraph statement all text, but it will be the opposite of what you have done, so cunning the letters in and then doing a quick pass to clear things as well as the second quick pass to outline the letters of the text. I would just run it but I only have two sheets and dont want to do much testing and not have a sheet to do the final run on. I will be using a 10 watt Ortur unit.

[@TheLouisianaHobbyGuy]

I don't know... try a test with some construction paper maybe?

[@pennyeure9590]

Great video! Thank you for sharing the file! I have an atomstack x20 pro. Just got it, never used a laser before. I noticed your setting for your machine for the 3 mm BB. I was wondering what would your setting be if you use 6 mm? I am trying to get my power grids for different stuff. I want to get an idea of what setting to start at. I know your setting my not work with my machine but I am just trying to get starting point.

[@TheLouisianaHobbyGuy]

Try joining my free forums Penny. lahobbyguy.com/bb I have the Universal Test Card there in the members only area.

[@lonniedupont]

👍🏻👍🏻👍🏻👍🏻👍🏻

[@TheLouisianaHobbyGuy]

👍🐥🐣🐰👍

[@sharonsimonson5392]

Are your Gnomes listed for purchase? If so, where can I find them, please?

[@TheLouisianaHobbyGuy]

I used to sell them on a few different graphics websites, but I've taken almost all of my files down from those sites since I opened my own online store Sharon. I'm in the process of redesigning all of them as time allows, and they'll eventually be up in my store. For now, with each new holiday that comes around, I'll be releasing one new Gnome for free to my subscribers.

[@sharonsimonson5392]

@@TheLouisianaHobbyGuy Thank you! Did you release the Leprechaun Gnome yet?

[@TheLouisianaHobbyGuy]

I'm going to release it next year Sharon, but if you email me, I'll send it to you. [e-mail]

[@rebeccasaladino9466]

Can this download be used for commercial use? To sell as a finished product of course.

[@TheLouisianaHobbyGuy]

Yes

[@steveferguson1232]

That sucks so bad Rich that people have the gumption to say it’s theirs.

[@TheLouisianaHobbyGuy]

Some think it's theirs because they bought it from others that sold it to them as original Steve. Not really their fault.

[@merrillalbury8214]

You need to Copyright these.

[@TheLouisianaHobbyGuy]

They have an implied copyright Carl.