Making "The Maverick" A Square 14 karat Gold Ring with Sapphires

[@mordecaialivanallenoshea7532]

Wow! I was thinking that the ring looked perfect just being plain and square. Then you set stones and engraved and took it to a whole new level. Great job!

[@CoinRingsfromTheMint]

Right? I was super happy with the results!

[@janilami1753]

L'ok

[@TheDeerInn]

That is a really neat shape of a ring even without the stones, but the finished ring is over the top fantastic!!!

[@leonardreyes8224]

The amount of talent you have is amazing. I'm not a jewelry person but I'm definitely going to buy some of your 🙂

[@hectorgarcia8691]

Wow you got the full package deal, a skilled wax carver, an accomplished caster and a stone setter.. to top it all off a great engraver !!! Congratulations, and thanks for the great video and lesson as well 👍

[@CoinRingsfromTheMint]

Thanks!

[@jaredschrock5270]

That coffee comment lol. You have some of the best videos to watch. I really like the coin ring making videos. I still have to make one yet.

[@jonathanmellette8541]

Just do it! Skyler's videos got me started, and I've made a few hundred now. It's one of the most fulfilling hobbies I've ever had! We even have a dedicated community on Facebook.

[@jaredschrock5270]

@@jonathanmellette8541 Ohhhh I been making them for a little over a week now. Still need to figure out how to keep the coin level when pressing, as it keeps moving when I do.

[@UMEJIA17]

Skyler You have gotten so good. You are a pro. This is the most amazing ring I have ever seen. When the day comes and I get married. I would I definitely come to you for a custom ring like this. I absolutely love it

[@CoinRingsfromTheMint]

5hsnks for that! I really appreciate it :)

[@jenwhitedesigns]

I love that you’ve named your tools 😂😂😂 Great piece. Thanks for the share.

[@CoinRingsfromTheMint]

Lol! Thanks :)

[@jamesdibiase346]

That's the nicest mens ring I've ever seen, beautiful.

[@CoinRingsfromTheMint]

Wow thanks for that! It is definitely my favorite ring that I've made for sure!

[@TheCr0wned]

Yeah I agree, Love the bulkiness but also love the finesse yknow

[@TheCr0wned]

I'll buy it one day, unless it gets sold

[@petermetzelar1342]

@@CoinRingsfromTheMint ³1 y

[@rogerteich2650]

I an solutely loved this ring. It’s so different from the normal rings it’s definitely something special!!

[@spidersinspace1099]

Thanks for sharing your talent. I had my doubts on how that ring was going to look but it turned out fabulous.

[@adenolenti]

Even the cat loved this ring. Spectacular design and execution.

[@rollandfrederick5932]

Awesome ! I love the design, and detail Brother. Amazing! I, want one in silver, with tourqoise. Beautiful work. Thank you for sharing.

[@jozefcavis6150]

❤❤❤❤❤the most beautiful ring I have ever seen in my life❤

[@CoinRingsfromTheMint]

Thank you!

[@mattbobe2226]

Beautiful ring. Why do you twist the sprew? Does it help when casting?

[@CoinRingsfromTheMint]

It helps the metal get into the mold a bit quicker.

[@HarosOfStyx]

If I want to make a ring that has many gems on the side of the ring, how should the stones be set? Pavé setting? Or some other way? I have a design in mind, but have only ever seen ONE ring designed that way.

[@CoinRingsfromTheMint]

You could set them all sorts of ways. This was none of a pave / bead set.

[@HarosOfStyx]

@@CoinRingsfromTheMint ok. Then I'll make an unlisted video with everything I have in mind, because it'll be better than writing description. And then you can tell me if the final product is doable, and/or insanely expensive lol

[@CoinRingsfromTheMint]

@@HarosOfStyx If you were wanting me to make it, you can always contact me through my website www.changeyoucanwear.net also :)

[@arnedalbakk6315]

Great clip🎉. Thanks. God bless you, and your famely ❤. Big smile frome Norway 😊

[@japudjuha]

Love this ring idea mate, The curved square profile is very masculine you’re not overpowering. A beautiful design!

[@CoinRingsfromTheMint]

Right on thanks! I totally agree :)

[@anthonysublett4392]

That is a stunning ring. As always this is the best channel in this genre on KZbin. Just amazing!!

[@CoinRingsfromTheMint]

Thanks Anthony!

[@darcchylde]

You were 100% right about the colours, the ring came out phenomenal. What pleasantries to discover all these other skills. The engraving gets me every time. That kitten though, you didn’t even flinch with those claws 😂

[@CoinRingsfromTheMint]

Lol! Charlie cat is a busy guy for sure :)

[@Chimaera112]

A really beautiful design for a man's ring. So many different skills were needed to complete it (wax carving, casting, engraving, stone setting, and of course a great skill for the design itself). A work of art and I am awe of your skill.

[@CoinRingsfromTheMint]

Thanks for the kind words!

[@daviddavis703]

Very cool design! I enjoyed the blue stones on the sides.

[@CoinRingsfromTheMint]

Thanks! Yeah those sapphires ate top notch!

[@jodzilla3000]

Beautiful creation. Ive really enjoyed watching your process on a few videos lately. Thanks for your work. Another version of this. I Would like to see a black stone on the 4 corners with emeralds either side. The engraving was spot on!

[@CoinRingsfromTheMint]

That would look amazing!

[@PoorMiners321]

I really love your creation bro, thanks for sharing your amazing job.

[@shawngee5481]

Skyler, not only did you master coin ring making, but you are mastering fine jewellery making as well! What is the trick to engraving? How do you come up with the designs to engrave on the piece you are making.

[@CoinRingsfromTheMint]

It is just tons of practice. I'm still a long way from where I want to be with engraving at the moment but I'm getting better for sure! I spend a ton of time looking at Google images and old architectural pics to get ideas.

[@shawngee5481]

@@CoinRingsfromTheMint Wow! And you say you are a long way from where you wanna be? Your engraving is truly AMAZING! I am not sure about anyone else, but I would love to see you do a video teaching the basics of engraving. Your channel is so informative and I have learned so much from you over the years. Thank-You for your dedication and hard work in sharing your crafts and knowledge with us!

[@Someone-tj1sf]

Hey )) very good video !! Could you say where you got the stereo-mikroskope? It seems its a rare one with really enough workdistance from the lenses...

[@douglaswoodard3412]

mad skillz man and the shape is killer

[@BopWalk]

That is one beautiful ring my friend, top notch crafting. I love that Art Deco design too!

[@CoinRingsfromTheMint]

Thanks!

[@zakallen6456]

Good work! Love the sticker on your drop plate!

[@desmondmurphy449]

I worked at a store where we made quite a few square bands but usually just plain. Wore one myself during my first marriage. They're comfortable but a super PITA to size. Nice bead setting job, not a lot of guys around who can still do that, at least in the US.

[@CoinRingsfromTheMint]

Yeah I love that shape band! I’ve never had to resize one but I can imagine it’s a mess :)

[@desmondmurphy449]

@@CoinRingsfromTheMint Four times the work!

[@noahturner256]

I didn't expect the cat. It was a surprise to be sure but a welcome one.

[@glen8449]

NEVER saw that done before. How great it was.

[@outerthoughts30]

Those are some nice Calipers, Sir. I got the same ones

[@hiba]

That turned out AMAZING! what is that spinning machine called? that throws molten metal..

[@CoinRingsfromTheMint]

Thanks! It is a centrifugal caster. They are super fun to use :)

[@hiba]

Thanks so much! ^_^ would look for it..

[@bradanderson1051]

Your becomming great at your craft. Awsome work you do as always.

[@CoinRingsfromTheMint]

Thanks for the kind words Brad!

[@Thatsamerican]

What do you use to secure the sapphires in place? Is it super secret glue?

[@CoinRingsfromTheMint]

I actually use the metal around the hole to make little beads that hold them in place.

[@Thatsamerican]

@@CoinRingsfromTheMint Thanks for your response. I'm a long time 3D modeler(old job) and have been into 3D printing for about 5 years. Now their are some really cool filaments that print well and burn away "relatively" cleanly. So I have been watching stuff on casting, and your work/videos are excellent and inspiring. Very nice work, sir.

[@jeffreybuetow8346]

I have never seen a twisted sprue used in my 45+ years as a goldsmith. Please explain its purpose. Very nice work on this project. Jeffrey

[@CoinRingsfromTheMint]

I was taught that it helped fill the cast better.

[@jeffreybuetow8346]

@@CoinRingsfromTheMint I learn something new every day! I will give it a try. Thanks for the reply

[@RolandoPasanch]

Beautiful job!!! congratulations and hugs from Nicaragua

[@paulkline9122]

Love watching the engraving you do. Would love to see more video content on the engraving. What engraving tools do you use? Any hand push engraving tools? Not sure I want to invest in the pneumatic setups yet.

[@frankmons4889]

Great ring! The engraving is stunning. Thanks for sharing 👍👍👍

[@CoinRingsfromTheMint]

Thanks for watching!

[@jorgealbarran4826]

Where did you learn how to bright cut, and hand engraving? Beautiful workmanship!

[@CoinRingsfromTheMint]

Thanks! I've been working under a master jeweler in Portland. Paul Bartnik designs.

[@jorgealbarran4826]

@@CoinRingsfromTheMint I am a diamond setter by trade myself fourth generation. I have to tell you that I admire what you have learned from this master jeweler that you are under.

[@peterdejong3182]

amazing you are the best..!!!..💪💪 Greetings from The Netherlands.

[@CoinRingsfromTheMint]

Wow, thank you!

[@krhe2775]

Beautiful work. Your very talented.

[@qfc1313]

What do you do with the gold that gets drilled/burred/engraved out?

[@CoinRingsfromTheMint]

It falls into my bench pan and then goes into a bucket at the end of the day. All my vacuum and floor sweeping goes in there too along with used sandpaper etc. Usually about once a year it goes to the refinery and gets melted down.

[@qfc1313]

@@CoinRingsfromTheMint Awesome, thanks for the response.

[@ronfry5851]

Absolutely phenomenal, quite a talent there young man awesome

[@stephenward3468]

I made the exact ring in red white and yellow gold.Make sure you get the correct customer finger size BEFORE making as sizing as sizing will change the equal shape of the ring.

[@savagestacker]

What the heck just happened !!! Spin casting just blew my mind 🤯 you sir are a master Beautiful ring Watch out kitty!

[@CoinRingsfromTheMint]

Spin casting is a blast! I'm working on a future video that we're calling trailer park sling casting lol. It's going to be a low budget casting option. I'm not sure how safe it will be though haha. The guy who taught me fine jewelry is doing it with me :)

[@MrDutchman100]

Great job making that ring. I also do what you do and it’s always nice to see other people’s perspective on types of jewelry pieces. I think I will make one like that with 22k yellow diamonds , or red Ruby’s. Your ring looks fantastic.

[@CoinRingsfromTheMint]

Oh yeah that would look fantastic!

[@lylepascoe7243]

Hi, Why do you twist the sprew wax and not just keep it straight?

[@CoinRingsfromTheMint]

It helps the metal get in there faster. It’s like spinning a bottle when you dump it out.

[@lylepascoe7243]

Ah, Interesting. Thanks

[@petitgulliver4547]

It's a perfect video! Thank you for uploading it! Can you tell me what the tools name at 11:00?

[@CoinRingsfromTheMint]

It is a GRS inside the ring holder. They make several different types.

[@406751]

This video was so relaxing.... Love your content bro. Gorgeous ring

[@CoinRingsfromTheMint]

Thanks!

[@alexandervictor4310]

Stunning work mate!!

[@CoinRingsfromTheMint]

Thanks!

[@bobwest9267]

What kind of wax is it?

[@arnedalbakk6315]

Hi. You a truly one of the best"ringmaker" i ever see😊. I need some informasjon. Do you makes ringes on ordner? Take care. God bless you and your famely. I hit the members button right now😊

[@CoinRingsfromTheMint]

Thanks yes I do! Contact me through my website www.changeyoucanwear.net

[@arnedalbakk6315]

Thank you🙏

[@tabasdezh]

I'm happy to see you getting better and better in jewelry making :)

[@andrewsouthern4831]

An absolutely amazing ring i love gold and its unique nice job

[@CoinRingsfromTheMint]

Thanks!

[@saeedflores8148]

Such a nice ring I really liked it before the engravings but it still looks awesome

[@RJ-hx5nb]

Love square rings !! Hey ! Look who has a kitten ♡♡♡

[@kyolym]

May I ask what would it ring like that cost?

[@CoinRingsfromTheMint]

Check out my website www.changeyoucanwear.net

[@user-harleyblack]

Cool job. I liked it very much! 👌

[@ianbarnard4253]

This looks amazing 😍 How many grams is the ring?

[@CoinRingsfromTheMint]

I’m not sure

[@ianbarnard4253]

@@CoinRingsfromTheMint oh damn 😫

[@landonrobinson238]

Such a awesome ring! I hope to one day have half the skills you have.

[@brianb4014]

Nice stone setting on the side.

[@HawsDaBaws]

Hey dude! what is that thing you used to size the ring hole in the wax? I have a carving mandrel I bought off Amazon years ago and its junk.

[@CoinRingsfromTheMint]

It's a Matt wax reamer. It's super awesome!

[@HawsDaBaws]

@@CoinRingsfromTheMint Holy smokes! that was quick, thanks for the reply! Love your videos keep up the fantastic work!

[@frankwalker2120]

Gorgeous, Wow are you talented !! What is something like that worth?

[@CoinRingsfromTheMint]

Thanks! Check out my website www.changeyoucanwear.net

[@alfonsosterling133]

How much does this ring weigh???

[@butdidwedie5664]

you dont collect the dust n fragment ?

[@CoinRingsfromTheMint]

That is what the catch tray I'm working over does.

[@vincec6020]

You do beautiful work. I seen some of your other work. Some awesome stuff. I’d like to know if you do private work work or sell your rings.

[@CoinRingsfromTheMint]

Definitely! Contact me through my website www.changeyoucanwear.net

[@k5rmj]

I'm thinking something like that for myself. Great work

[@MrTurbotom1982]

Really cool ring!

[@MazTech_Knives]

Love your content man im actualy doing similar stuff thanks to you and your motivational content thanks man

[@CoinRingsfromTheMint]

Right on!

[@deborahduthie4519]

The Cornflower Blue Sapphires look electric.💎🇦🇺The final video of the. Ring spinning , the gold looked like Silver. Maybe address that and keep it until you make another that you lie more. This one could be an heirloom keepsake too.

[@robpetesworkshop]

You should be super proud for creating such an amazing ring , I woul wear that daily in a hearth beat ! You got a new subscriber here!

[@CoinRingsfromTheMint]

Thanks I really appreciate it!!

[@rashido_grey]

Any coins you can knock into a square shape?

[@CoinRingsfromTheMint]

I actually have a few years ago. Pepe tools has a square mandrel that I made one with.

[@Ben-Carr]

I love how it is blue sapphires rather than boring white diamonds.

[@CoinRingsfromTheMint]

Agreed! This color sapphire is my favorite stone :)

[@garymcintyre1498]

Nice work bro !

[@CoinRingsfromTheMint]

Thanks!

[@Beachbumartist]

Cool watching the process man.

[@CoinRingsfromTheMint]

Thanks!

[@Beachbumartist]

@@CoinRingsfromTheMint Yeah did a great job. People don't realize how much work and time it takes compared to them watching an edited video. I have 150 videos on the silver and gold coins I buy but it would be cool to have cold coin ring, be costly though lol.

[@susanjaeger5645]

Stunning piece.

[@Chubaca520]

Looks great :) I never knew I would like square rings but this definitely looks amazing

[@jesusmeraz186]

You should put center stones in the engraving sides

[@oneshotme]

Beautiful ring and great job making it Enjoyed your video and I gave it a Thumbs Up

[@CoinRingsfromTheMint]

Thanks!

[@oneshotme]

@@CoinRingsfromTheMint You're welcome

[@aubreyravenl]

i realized i now want to pursue a hobby as an amateur jeweller then abandon that said hobby after a year. then i saw the cat then I automatically subscribed.

[@CoinRingsfromTheMint]

Haha!

[@Dulles-jt6sr]

I love your work! 😍

[@vladimirkovacevic1656]

it looks very cool

[@charlesroer972]

Nice job looks different from the usual, but that’s what it’s about your design . Keep it up 👍

[@CoinRingsfromTheMint]

Thanks!

[@NuTacLLC]

Very cool. Can I have it? I would appreciate it. Thanks in advance for giving it to me. Great work.

[@jaceware8808]

Beautiful ring.

[@chasehays9308]

What files are you using for the wax? You’re videos are really impressive by the way! Probably the best I’ve seen involving fabrication.

[@CoinRingsfromTheMint]

Thanks! Check out my 2 finger ring video and I go over the baby and Bertha. Those are the 2 main wax carving tools for 95% of the work :)

[@robertmariner7640]

Another cool video and stunning ring can't wait for my tools from your end of the world to arrive.

[@ulisescastillo285]

Wow nice job 👍

[@hendrahen5873]

Alamatnya tempat gosok batunya dimana mas

[@JGV_IX]

Epic! Loved it!!

[@Doityourselfwithjoe]

Great Job!

[@edmelzark1069]

Very nice !!

[@Ben-Carr]

I saw the ring on your website, it is my exact size! I wish I could afford it though. If I could that would be my ring. But I can't afford that ring.

[@anamardiana-em2uf]

You know the song background and ring making are more enthusiasm can i know what the song is

[@CoinRingsfromTheMint]

I honestly can't remember the name of it.

[@tracijones6840]

Gorgeous!

[@dafster999999]

15:35 feels like i’m in a elevator!😂😂👍🏻

[@котучёный]

Я так и не понял, за счёт чего камни держатся?

[@hardy3559]

Great to watch buddy

[@CoinRingsfromTheMint]

Thanks much appreciated!

[@art1muz13]

1ST APOLOGIES: WHY? FOR THIS DISSERTATION! i HAVE BEEN WATCHING SREETIPS AND I KINDA WEARIED OF THE SAME-OLE SAME-OLE OVER AND OVER AND THEN HE STARTED WITH ''I HAVE NO MONEY PLEASE BUY MY REFINED JEWELER'S SCRAP ON EBAY''. SO I FOUND YOU TODAY WHICH IS AWESOME . YOUR WORK IS VERY GOOD. ALL THAT FOR THIS, I'VE BEEN MARRIED 40 YEARS AND I WORKED AT A STORAGE PLACE IN IRVINE, CA. FOR A FEW YEARS. I CLEANED MANY A UNIT AND FOUND ENOUGH GOLD TO TRADE FOR MY WEDDING BAND. THIS BAND WAS AN 18K ''ROLEX TYPE/STYLE RING. I LOST IT A WEEK AGO. I HAVE TURNED MY B/R, SHED,YARD AND EVEN MY TRASH INSIDE OUT AND UPSIDE DOWN. I HAVE METAL DETECTED MY YARD AND PUT AN ''AD'' ON THE ''NEXTDOOR'' APP. SO FAR, NO GOOD. SO DO YOU LIKE ANTIQUE OR VINTAGE CLOCKS? I EVEN HAVE A CUCKOO WITH 2 DANCERS AND A MUSIC BOX ALL-IN ONE. SO WHY WRITE THIS? I WAS WONDERING IF YOU'D MAKE ME A RING FOR A TRADE OF AS MANY CLOCKS ,(REASONABLE),? ONE NEVER KNOWS UNLESS ONE ASKS. THANK YOU FOR JUST READING THIS AND FOR YOUR VIDEOS

[@CoinRingsfromTheMint]

Sorry I'm not a fan of clocks :) Hopefully you find your ring though!

[@art1muz13]

@@CoinRingsfromTheMint thank you for your ''kind and prompt candor'' Artemus.

[@art1muz13]

MR. CHANGE MAN I FOUND ''MY PRECIOUS'', MY DAG-NAB-IT KITTY HAD ABSCONDED IT.