Рет қаралды 793
Cutting instructions for the Coffee Bar
Cut from 1/32” (1mm) Plywood
Piece Quantity Imperial Metric Description
A 1 6 13/16” x 3 ⅜” 173 x 86mm Back
Measure from Top to bottom of long side: 21, 24, 42, 46, 95, 98, 112, 115, 140, 143 and 170mm
These are the revised measurements that I ended up using
J 1 1 7/16” x 1 ⅝” 41 x 36 mm Drawer bottom
K 1 1 ⅝” x ⅜” 36 x 10 mm Drawer back
L 2 1 ⅝” x ⅜” 41 x 10 mm Drawer sides
Cut from 3/32” (3mm) Plywood
B 3 2 ⅞” x 1 ¾” 74 x 45.5 mm Sides and centre
On two of the pieces, mark from top along the longer side: 13, 16, 41, 44 mm
C 1 3 ⅜” x 1 13/16” 86 x 45.5 mm Bottom
Drill a pin hole 4.5mm from the left and 1.5mm from the front
D 1 3 ½” x 1 ⅞” 90 x 47.5 mm Counter Top
E 2 1” x 3 ⅜” 25 x 86 mm Shelves above counter
F 1 1 7/16” x 1 ⅝” 37 x 41mm Lower shelf in cupboard
G 1 1 7/16” x 1 25/32” 37 x 45.5 mm Upper shelf in cupboard
* H 1 ½” x 1 7/16” 13 x 37 mm Drawer Front
* I 1 2 3/16” x 1 7/16” 55 x 37 mm Cupboard Door
I recommend that you wait until the unit is put together and measure the space of your drawer and cupboard front, before you cut these 2 pieces.
Other Materials,
Thin Coffee stir sticks
2 door nobs
Paint or stain.