Making Vertical Bit Drawer / DIY / Remake

3D Modeling Blueprint : • Making Vertical Bit Dr...
This bit drawer is practical and aesthetic, so it's a work I'm picking up.
The shape is also vertical, so it's very unique and beautiful, and it can hold quite a lot of bits.
Looking at the video I uploaded previously, there was a lack of editing, so I tried making it a remake version again.
I tried to make sure that you could enjoy it comfortably without the part I narrated.
I think those who have already seen it will be able to enjoy it with a new feeling.
Thank you.
#DIY #Woodworking #Drawer #Bit_Drawer #Vertical_Drawer

[@Kynosys_]

3D Modeling Blueprint : kzbin.info/www/bejne/gobUXoupet6moa8 This bit drawer is practical and aesthetic, so it's a work I'm picking up. The shape is also vertical, so it's very unique and beautiful, and it can hold quite a lot of bits. Looking at the video I uploaded previously, there was a lack of editing, so I tried making it a remake version again. I tried to make sure that you could enjoy it comfortably without the part I narrated. I think those who have already seen it will be able to enjoy it with a new feeling. Thank you.

[@MurphyKitchell]

This is so unnecessary, I love it. I hope you feel pride every single time you use it.

[@Kynosys_]

Thank you for those kind words! In fact, I feel proud every time I use it. It's better to have someone who understands that.

[@dennisgu2506]

Der Wahnsinn, wieviel Liebe zum Detail kann man in ein Regal investieren. Du kannst sehr stolz sein

[@Kynosys_]

Es ist erstaunlich zu sehen, wie viele Menschen mein Video sehen und wie viel Arbeit und Liebe zum Detail ich darin stecke. Ich denke, das liegt daran, dass Sie viel Arbeit investiert haben. Danke It's amazing to see how many people see my video and see the amount of work and attention to detail I put into it. I think it's because you've put in a lot of work. thank you!

[@hendrikw]

Wow. Overengineering at its peak. I love it.

[@Kynosys_]

It may seem a little excessive, but I am very satisfied with the attempt itself. Thank you for your kind words.

[@Paul-nq1ik]

@@Kynosys_ Dude it's your shop, your project. If you're happy then you have succeeded. I'm definitely going to use the idea, as that would be very handy to attach to my drill press stand. Not going for the acrylic and lighting, mostly because I personally do not care that much about aesthetics and save the money for the next projects, but I do admire your work. Very well done! May you have many, many happy hours of woodworking 🙂

[@warlock0100]

Фантастическая работа. Очень много важных мелочей предусмотрено. Потрясающая реализация электрической части.

[@AssafLevyIL]

Wow, it's been a while since I saw something unique like that in woodworking

[@Bull_Chucker]

This should totally be on display in a museum. Very nice!

[@Kynosys_]

Exhibiting it in a museum also means that it has little practical use. I also want to pay more attention to practical aspects. I would like to express my sincere gratitude for your impressive words.

[@user-ev9rn4qm2p]

Это гениально! Вы создали шедевр! Это и красиво и функционально. Шедевр в полном смысле слова! Шедевр современного дизайна! Это нужно выставлять на выставках

[@Kynosys_]

Я не только дал самую высокую оценку, но и очень рад, что вы упомянули выставку. Истории, идущие от сердца, всегда трогают сердца людей. Я хотел бы выразить огромную благодарность. In addition to giving the highest praise, I am very happy that you mentioned the exhibition. Stories that come from the heart always touch people's hearts. I would like to express my great gratitude.

[@Igor-Paladin]

​@@Kynosys_Это перезалив вашего старого видео?

[@musiquepourmoi11]

Me habría gustado hacer esta realización. Es maravilloso. Bravo

[@user-mo6ne5hu9f]

Отличная работа и изумительное отношение к инструменту! Рай перфекциониста)

[@drakemasta9655]

love the use of acrylic for the bit holders with the lighting

[@Kynosys_]

Ich verwende bei meiner Arbeit häufig Acryl. LED-Beleuchtung passt gut zu Acryl. Vielen Dank für Ihr Vergnügen. I tend to use acrylic a lot in my work. LED lighting goes well with acrylic. Thank you for your enjoyment.

[@Ron-FabandBuild]

Fantastic and beautiful drill and bit storage solution. Well done. I may have to borrow this idea for my shop sometime in the future. Thank you for your contribution

[@bosic79]

Ich bin so begeistert von der Idee und vor allem von dem handwerklichen Können und der Umsetzung. Danke für das Zeigen dieser schönen Arbeit.

[@SouthShorePlasticSurgery]

Yet another amazing scratchbuilt creation! You truly are a master... Jonathan

[@doug2985]

After watching this, the lifting drill press table, and the electric work bench, I have to say you, sir, are an artist. I'm looking forward to watching the rest of your videos.

[@ondrejzatko9467]

incredible 🙏 i’m gonna try this in my garage. Thank you for your knowledge

[@Mike__B]

Wow this is absolutely fantastic ... then me looking at all my containers that hold various bits and noticing all the missing spaces... yeah it would be wasted on me.

[@JeremyStover]

@thisoldtony should definitely make this for tool storage. Absolutely beautiful!

[@dmitrykuchin5617]

Сказать, что это великолепно будет не правильно - это божественно!!!

[@Kynosys_]

Я не могу поверить, что такое короткое и лаконичное произведение может затронуть струны моего сердца. Кажется, это страна литературы со многими великими писателями. Хочу выразить искреннюю благодарность. I can't believe that such a short and concise piece of writing can touch my heartstrings. It seems to be a country of literature with many great writers. I would like to express my sincere gratitude.

[@dwightpennington1925]

Absolutely wonderful work.

[@Dbossmon]

nice work! Great multi-use cabinet could also be great for a spice rack for lux kitchen.

[@sturobertson7850]

Stunning piece of craftmanship. Wish I had a workshop big enough to build one of these! Unfortunately my workshop in storage at the moment!

[@ederorellana9919]

This is great. Thank you for sharing.

[@Kynosys_]

I would like to express my deepest gratitude.

[@curlsalot91]

i love everything about this. Thank you !

[@pearlg6411]

This would be great for art supplies

[@ygkim8203]

영상 볼때마다 늘 느끼는거지만 정말 대단하십니다. 오늘은 또 어떤 영상을올리셨나 기대를 하면서 보게됩니다. 다시 봐도 재밌고 유익하네요. 멋진 영상 감사드립니다. 건승하세요.

[@victorcristianvandoni6463]

Cuánta belleza y simplicidad!! Muy hermoso!! Muy práctico!!

[@mickydl66]

A little masterpiece... bravissimo! Micky (from Italy)

[@user-np7pl1mh9s]

작품입니다.... LED 사용을 아주 예술적으로 하시네요~ 멋집니다. 잘보고 갑니다~^^

[@vungngoc2008]

I really love your finished product. I really like what you did with this video. From your workplace to your tools and skills. I love this so much. Thank you very much.

[@Kynosys_]

Only people with a gentle heart can express generous praise for the hard work and passion of others. I am deeply grateful for your sincere writing.

[@peterthill]

Good job. Thx for showing!

[@loren5752]

Fantastico, geniale. Proverò a copiarlo. 👏👏👏👍

[@chanchopanza]

Simple magnetic switch (reed switch) would make it a little bit easier on the light controller, beautiful job

[@Jack-Fleming]

WOWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW!!!!!!!!!!!!!!

[@MASI_forging]

Wow such talent and skill. That's gorgeous 😍😍

[@a-plans]

Beautiful design and editing, the whole experience has a nice aesthetic. :)

[@Vadim_Hadjiev]

Одноко очень красиво и необычно! Молодец!

[@Kynosys_]

Огромное спасибо за похвалу!!! Thank you so much for your praise!!!

[@sheep1ewe]

I hawe followed You for quite a while now, and i must say that Your videos are of very high quality and i always enjoy watching them as inspiration for my own projects!

[@senjos4805]

You sure have the most amazing workshop!!!

[@Kynosys_]

I am decorating my workshop with the intention of using it until the last day. Everyone may have different thoughts, but I think creating and thinking about something new as long as possible is a meaningful life. You might say this is a bit over-the-top, but today I step into my workplace with that mindset. I am deeply grateful that there is someone who sympathizes with such feelings.

[@senjos4805]

@@Kynosys_ I can understand you very well!!! We have one life and each and everyone tries to make the best out of it. An as I can say, you do that!! Go on, Ill be watching every time!

[@NSResponder]

The lighting really puts it over the top.

[@Kynosys_]

3,000K LED lights were used. I also really like the soft light. thank you!

[@illergiuliotti1896]

Very beautiful self forniture! It was a pleasure to see construction! Best regards from Genoa Italy

[@Kynosys_]

The great appeal of DIY is that people can empathize with it regardless of nationality, race, age, or gender. thank you!

[@sixpotshot]

Pretty awesome ✨

[@user-ig9zw1fx1u]

상상력이 풍부합니다. 잘 했어요. 공유해 주셔서 감사합니다.

[@Kynosys_]

한국어로 글을 적어주셨네요. 당신의 배려에 깊은 감사를 드립니다. 더 멋진 작품을 위해서 노력하겠습니다. You wrote it in Korean. Thank you very much for your consideration. I will work hard to create better works.

[@user-xj8xd8ws3v]

보면서 항상 생각이 나는거지만...필요도 없는데 갖고 싶다는거... 깔끔하고 멋납니다.

[@Kynosys_]

크게 필요하지 않은분께서도 가지고 싶다니, 보람이 있습니다. 그럼에도 글 써주신데 감사 드리구요. 더 재밌는 영상을 준비하도록 노력하겠습니다

[@feynthefallen]

If I built something like that, it would be empty inside of a week...

[@lapierretube1735]

Incredible !!!!👍👍👍👍👍

[@Kynosys_]

Thanks for your praise!!! 🫡🫡

[@garylinker69]

Just landed on this video and I'm glad I watched. It is a very practical and pretty design. I'd perhaps make it to utilise some sort of renewable battery than mains power conversion. The amount of time the draws are open and lights on wouldn't drain too much from batteries and it would be easier to place in the workshop. It is a very good design indeed 👍

[@Kynosys_]

That's a very good idea. I overlooked the fact that the time the light is on is shorter than expected. If I had thought of that in the first place, I might have used batteries. My plan is to install 12V power lines that can be connected easily throughout my workshop. Things like motors and LEDs are all unified to 12V. Anyway, I think a battery would be much more convenient in terms of portability. thank you

[@wernerpfeifer]

Schöner als beim Juwelier!

[@kennyodernicht7324]

Männer und ihre Werkstatt😂👌👌

[@Kynosys_]

Ihnen, die Sie diese Schönheit spüren, spreche ich meine tiefe, einfühlsame Dankbarkeit aus. To you who feel that beauty, I express my deep, empathic gratitude.

[@onehandedmaker]

Hi Kynosys, Love this video and design. Very usable drill storage and I will be building one soon! On top of that the lights, runners and acrylic! Have subed and will watch more. Regards James One Handed Maker - Australia

[@Kynosys_]

First of all, I would like to express my respect. You are a beautiful person who shows that physical limitations cannot limit the beauty of the soul. It would be a great pleasure for me if you refer to my work when creating new work. I also subscribed to your channel. I will watch these valuable videos. I am very grateful for this new relationship, and I hope you will always be healthy and happy. thank you!

[@kennyodernicht7324]

Amazing 👌👌👏

[@mariodelacruzbaquero2964]

Que maravilla de trabajo maestro

[@Kynosys_]

Thank you for your thoughtful comments.

[@mikedagneau1315]

Do you have a set set of plans for this project a person can buy?

[@Rimrock300]

Plans are just shown in another video

[@Kynosys_]

Sorry for late reply. Wish to refer this video. kzbin.info/www/bejne/gobUXoupet6moa8

[@doit8279]

Super Idee, echt toll👍

[@RICK-xv4yz]

Выглядит невероятно красиво функционально и удобно. Супер идея. Вдохновляет и завораживает. Иногда удивляешься, почему на этом видео не 10 миллионов просмотров! Благодаря вам немного начал разбираться в электрике. И вопрос, на моменте 6:20 вы припаиваете кабель к металлическим профилям и после соединяете его с проводами от светодиодных лент. Зачем?

[@Kynosys_]

Благодарю вас за ваши добрые слова. Что вам интересно, так это то, что в качестве провода использовалась сама направляющая ящика. Если внимательно посмотреть видео, то видно, что при выдвижении ящика внутри ящика нет проводов для управления светодиодом. Поскольку две верхние и нижние направляющие выдвижного ящика сами по себе действуют как провода, я подключил к ним источник питания. Это метод, который я придумал очень уникальным способом. Спасибо Thank you for your kind words. What you're curious about is that the drawer rail itself was used as a wire. If you watch the video carefully, you can see that when the drawer is pulled out, there are no wires to operate the LED inside the drawer. Since the top and bottom two drawer rails themselves act as wires, I connected the power source to them. This is a method I came up with in a very unique way. thank you

[@coldobina]

There are such thing as "Electrically Conductive Grease", you can try to replace one in the rails with it to avoid flickering. Search for one containing nickel.

[@Kynosys_]

You are an expert. I was just thinking about it, and when I applied electricity to the rail, it actually blinked. It seemed like the grease was blocking the electricity. There is such a thing as conductive grease? thank you. I'll have to look it up quickly. I'm very curious.

[@cahndeso9080]

Membutuhkan ke uletan membuatnya.

[@markvw1978]

Beautifull

[@Kynosys_]

Thanks for your interest!!!

[@eddylabbe]

Anyone knows where we can find those thick pieces of acrylic in North America?

[@serhathaslak2390]

amazing

[@Kynosys_]

Thanks for your interest!!!

[@Sam-wf4tr]

Amazing¡¡!!

[@Kynosys_]

Thanks a lot!🫡🫡🫡

[@NSResponder]

Ooh, I like this.

[@Kynosys_]

Thanks for your interest!!!

[@NSResponder]

@@Kynosys_ if you offered these for sale, I'm sure you'd have all the buyers you could handle.

[@TreeFilms1]

Wow

[@user-do2cf2wq3s]

😮부럽다 저 양반 성향 모든 도구에서 묻어난다 예술이다 예술 어느 나라 사람일까? 인간은 아닌것 같아

[@Kynosys_]

재밌는 말씀에 감사드립니다. 외계인 까지요^^ 하나 잡아다가 고문을 해서라도, 듣도보도 못한 새로운 작품을 만들어 보고 싶기는 합니다. 우리 발명인들의 꿈이죠. 더 노력해야 겠다는 생각입니다. 멋진걸 만들어 보겠습니다. 감사합니다.

[@RICK-xv4yz]

Какую светодиодную ленту использовали? Теплый белый 3000к? 12v? What LED strip did you use? Warm white 3000k? 12v?

[@Kynosys_]

Exactly. I used a 12V adapter and a 3000K LED.

[@ArtDH_Ukraine]

Hello. This is awesome! Can i ask wich tree matherial do you use?

[@Kynosys_]

The material used is birch plywood. Since I don't yet have a machine that can process a wide range of wood, I mainly use plywood. Among them, birch plywood is my favorite material because it has a pretty grain and is strong. Detailed drawings of this work are in other categories on my channel. please refer to this. thank you!

[@ArtDH_Ukraine]

@@Kynosys_ thank you a lot

[@JohnVK5JAK]

Wonderful. What is the pneumatic device you're using to crimp the wires at the 9:45 mark?

[@Kynosys_]

These are pneumatic pliers. There are a wide variety of products on the market that use pneumatics. There seems to be a lot of things you can use, so be sure to look for them. thank you!

[@user-nz5mg2nc4p]

美しい(*'ω'*) これは誰もが綺麗に使いたくなる素晴らしさがあると思いました👏👏👏

[@suatercanl6866]

Great work. It looks very aesthetic. I would appreciate it if you could share some measurements. Greetings.

[@Kynosys_]

Sorry for late reply. Wish to refer this video. kzbin.info/www/bejne/gobUXoupet6moa8

[@tukituki9537]

🔥🔥🔥

[@Kynosys_]

Thanks a lot! 🫡🫡🫡

[@thomaskramm5352]

Sehr cool - traue ich mir leider nicht zu selbst zu bauen - würde dir das Teil abkaufen :-)

[@Kynosys_]

Da es sich um eine Arbeit handelt, die auf der Grundlage eines Prototyps erstellt wurde, ist es wahr, dass der damit verbundene Arbeitsaufwand größer ist, als es den Anschein macht. Wenn es die Zeit erlaubt, wäre es meiner Meinung nach eine gute Idee, es in aller Ruhe selbst zuzubereiten. Danke! Since this is a work made from a prototype, it is true that the amount of work involved is more than it looks. When time permits, I think it would be a good idea to try making it yourself at your leisure. thank you!

[@kristianolsson9446]

Cool Tols👑🎁💥🎮

[@Kynosys_]

Thanks for your interest!!🫡🫡

[@folksme]

What a wonderful and unique way of storing/presenting your bits. Just two thoughts: Have you put any perspex sheets or anything like that into the sides? Otherwise you'll have to dust your drawers regulary. And for me it would have been even nicer if only the drawer which you have pulled out would be illuminated. The light inside the case would distract me too much from the open drawer - if you know what I mean. But regardless - this definitely is one of the most beautiful builds I have seen on KZbin for a very long time - even though I really don't like the nailer...

[@Kynosys_]

Thank you for your thoughtful and long writing, I would like to express my deepest gratitude. The answer to what you were curious about It is as follows: I did not block the side with clear acrylic to take out the bits I use most from the side. And because my workshop aims for reliable dust collection, this drawer does not become full of dust. It is a simple task to light up only the drawer that is opened. All you have to do is separate the rails used as electric wires. The reason why all the lights came on no matter which drawer was opened was because I wanted to show the inside. The lighting coming from the side was so beautiful. And when I turned on the light only on the open drawer, it wasn't very bright and seemed weak. If you hate nailers, you must be a woodworker, but in terms of woodworking, this is a very embarrassing piece of work. Someday, I would like to try it again with nice wood and without using a nailer. thank you!

[@folksme]

@@Kynosys_ Well, I can asure you that in terms of woodworking it indeed is a very fine and outstanding piece of work. Something to be proud of.

[@josephmarc6263]

I made a similar cabinet for my wife for her cooking spices. But I used the wrong slides and I have to replace them. What slides did you use?

[@Kynosys_]

You created that shape before me, right? Excellent. Rails are used in general drawers. What I also regretted later was that I placed the rails up and down because I wanted to make the drawer thinner. It was designed to receive lateral force, so it sags a little forward. If installed on the side, any rail seems to be fine. thank you!

[@Ramonlux]

Pure perfection! I love it! 👏🏻

[@timrussell2213]

I would also would like to know if you have plans? I would also like to ask can you make me one and how much would you want,I have never seen any thing like it before and its just beautiful,a pice of workshop art

[@Kynosys_]

Thank you for your kind words. Because many people want it, I uploaded a video of the design drawings for this work to my channel. You can check detailed figures.

[@rolandehmig]

You are grazy !!!

[@fin3125]

You should have links where to purchase everything so you can make a few bucks on them. Win win for both.

[@Kynosys_]

I sometimes upload plans as like this link.... kzbin.info/www/bejne/gobUXoupet6moa8 Also I'm trying to make more blueprints, but not an easy job. Let me show you in the near future. Thanks!

[@oskarmohar6073]

Hmmm.. should I make this for few of my old rusty ugly bits??

[@Kynosys_]

Old rust ugly bits are precious treasures that only true experts can own. I think it would be great to make a nice dresser to store it. My bits still need time to become treasures.

[@polzovatel588]

Линейка от incra tools - эта вещь

[@tukituki9537]

С электрической частью потренироваться надо

[@Kynosys_]

Это точная точка зрения. На самом деле я все еще новичок не только в области электротехники, но и во всех областях, включая деревообработку, дуговую сварку, аргонную сварку, фрезерные станки, токарные автоматы, ЧПУ, электрические цепи, пневмоцилиндры, автоматизацию и проектирование. Но, в конце концов, моя цель - попробовать все и сделать фьюжн своими руками. Отправляйся в путешествие со мной. Спасибо That's an accurate point. In fact, I am still a beginner not only in the electrical field, but also in all fields including woodworking, arc welding, argon welding, milling machines, automatic lathes, CNC, electric circuits, pneumatic cylinders, automation, and design. But in the end, my goal is to try everything and do fusion DIY. Come on a journey with me. thank you!

[@MrMemusashi]

Can you please let us know what brand of drill you are using? And did the bed come with it?

[@osamaibrahim7550]

Bosch pbd40 drill

[@jacdeguillaume6355]

C beau presque trop😂

[@Kynosys_]

Thanks for your praise!!!🫡🫡

[@krollitv]

Genial

[@Kynosys_]

Thanks a lot. 🫡🫡

[@AlexeyJoiner]

очень крутая идея!!!

[@Fischbroetchen1]

Schön

[@Kynosys_]

Thanks for your interest!!!

[@ChrisJones-dn9hz]

Both anger and joy

[@Kynosys_]

Only feel joy!

[@ChrisJones-dn9hz]

@@Kynosys_ haha ok!!

[@kozka5302]

😊

[@kozka5302]

кто-то приглашает даму посмотреть картины, кто-то аквариум, кто-то - шпиндельную оснастку.

[@Kynosys_]

Thanks for your interest!!!

[@atvlive9340]

Очень крутой проект, но сочетание электричества и дерева - меня пугают.....

[@andrewfore4237]

What is the background music to the video?

[@Kynosys_]

Please tell me which section of the song it is and I will let you know.

[@davfree9732]

Move over PC Hardware showoff cases! Let's showoff some 'Real' hardware!

[@user-yl5fn8gi5k]

Мастер

[@Kynosys_]

спасибо за вашу похвалу!!! Thanks for your praise!!!

[@user-dd4nh3ck7o]

판매는 안하시나요?

[@Kynosys_]

아직은 제가 사용하는 제품들을 만드는데도 시간이 모자라는 상황입니다. 좀더 지난후에, 많은 분들이 원하시면 약간의 양산개념으로 제품을 만들어볼수 있을거 같습니다. 공동제작 기회를 가질수도 있구요. 이 작품은 설계도를 이미 공개했습니다. 관심있는 분들은 한번 만들어 보시는것도 좋을거 같습니다. 감사합니다.

[@kyongsong8864]

제품화해서 파십시요 ..

[@Kynosys_]

생각보다 원가 자체가 많이 높습니다. 아직은 필요에 의해 직접들 만들어 보시기를 권해드립니다. 좋은 말씀 감사드립니다. 더 노력하겠습니다.

[@Vyker]

Zero repairability in mind. If one of those solder joints fails, it'll hell to fix. Good project though

[@Kynosys_]

I will definitely take note of your words. Thank you.

[@BrenQ99]

Well. Imagine if you had put a little thought into this build?

[@Kynosys_]

There are many things. This includes giving edges here and there with walnut, strengthening the internal cross-shaped adhesion, and diversifying lighting. I plan to reflect this in my next upgraded work. thank you!

[@micka282]

для хобийной мастерской великолепно, для профессионалов не практично

[@Kynosys_]

ты прав. Я даже не профессионал. Мои работы не очень практичны. Я надеюсь, что вы сосредоточитесь на моем стремлении всегда пробовать что-то новое и учиться. Спасибо you're right. I'm not even a professional. My works are not very practical. I hope you will focus on my passion for always trying new things and learning. thank you!

[@micka282]

@@Kynosys_ я ваш подписчик и ваши работы, в любом случае откладываются в голове, как полезный опыт для собственной работы. плюс я отдаю должное, вашему отношению к качеству. успехов вам)

[@CourchaineDk]

seems like a good idea, couldn't watch the full video the music drove me crazy

[@poet79eyes]

You could just mute the video if you don't like the music. Lol

[@danny3man]

In these world conditions, the acrylic chunks and plywood costs more than those bits.

[@stephanp.414]

greßlich die Musik

[@Kynosys_]

BGM is not easy for all people. Thanks

[@stefanstapel9893]

Was für ein Schwachsinn.

[@Kynosys_]

Thanks a lot.