How to make killer shop storage (w/out pegboard)

To start comparing quotes and simplify insurance buying, check out Policygenius: policygenius.com/wittworks. Thanks to Policygenius for sponsoring this video!
I can help you store, protect, & maximize your setup 👉 wittworks.shop
💵 Get 20% off my products here: t.ly/T-4p
TSO Wall Mount Holders - wittworks.shop/collections/tso
Tape Holder - wittworks.shop/products/tape-holder
Festool Battery Holder - wittworks.shop/products/battery-holder-for-festool-18v-battery
Shaper Trace Frame Holder - wittworks.shop/products/holder-for-shaper-trace
Plans for my base cabinets & drawers - wittworks.shop/products/diy-base-shop-cabinet-digital-download
French Cleats & Drill Holders - www.aglimpseinside.org.
Use code WITTWORKS20 to get 20% off until 12/25/2023 WITTWORKS20
I am not an affiliate & make no money off of that.
Patreon - www.patreon.com/wittworks
Adam Savage's First Order of Retrievability Videos
Efficiency and First Order of Retrievability in Shops - kzbin.info/www/bejne/rKqmo3uCjs56hNE
First Order Retrievability Tool Cart - kzbin.info/www/bejne/hoPTg4OphrB_pZY
Adam Savage: Tips for Setting Up a Workshop - kzbin.info/www/bejne/mqSxkJKspLaXbtE
Shaper Trace - www.shapertools.com/en-us/trace
🧰 Tools I used in the video (affiliate) 🧰
xTool P2 CO2 Laser - t.ly/181gI
Narex Richter Chisels - lddy.no/1ipfi
Wera Starter Screw Driver Set - amzn.to/3GnkeP2
3M Xtract Sample Pack (prices subject to change) - lddy.no/150ju
3M Cubitron2 Stickyback Sandpaper - lddy.no/1eaed
3M Xtract Mesh Sandpaper - lddy.no/1fq8o
you need this 👉 Pad Saver Interface (cheap) - lddy.no/1dc4t
3M Xtract Sander - lddy.no/1dq8m
3M Xtract Extractor - lddy.no/1d3fr
Green Pica Pencil - amzn.to/47CNYU2
White Lead for Pica Pencil - amzn.to/4a0C3ko
Double-Sided Tape for Woodworkers - lddy.no/1coie
Affordable Marking Wheel - lddy.no/1cu4i
"Million Dollar Stick" (miter saw helping hand) - lddy.no/1coid
Red Swann Morton Marking Knife - lddy.no/1e72w
Benchmark Double Square - lddy.no/1fq8b
UJK Drill Guide - t.ly/Cno27
UJK Precision Miter Gauge with Flip Stop - t.ly/v5Xla
TSO Parallel Guides - t.ly/4qqjB
TSO GRS-16 Rail Square - t.ly/oJ85n
Festool KSC 60 - amzn.to/3QZqm4I
Powertec Ratchet Clamp - amzn.to/2TadnCZ
Bessey Ratchet Clamp - amzn.to/3bPnH9W
KM Tools Mallet - kmtools.com/DREWWITT
🚨 MAKERS COMMUNITY 🚨
🗣 Connect with other cool makers like you on our Discord server: discord.gg/fe9DDtgPuF
📸 Follow behind the scenes on The Gram: witt_works
🤝 Join the cool kid's club here: www.patreon.com/wittworks
🙏 Thank you to the top-tier Patreons: Dave Meyer, Shane Cleavelin, Tim Epperson, Michael Downs, John Shiesser, Louis Brooks, Cameron Bryant, Linda Mizak, Aaron Geller, Matt Outlaw, Wayne Miller, Malcom McCutcheon, Matthew Goode, James Engelhardt, Troy Hall, Liam P Burke, Corey Davoll, Steve Thompson, Kevin Boatswain, Davin Ohms, Devin Perkins, William Taylor, Klay Jones, Gulzeb Niazi, Mike Masterman, Nathaniel Allard, Kristof Vannotten, Tony Tillman, Michael Jones, Thomas Sasala, Tracy Bachman, Kevin Jones, Jason Hagen, Braden Boex, Vincent Chov, Stephen L Birge, Chris Burton, Ben Thornton, Don Jenkins, Brian Suker, George Thomas, Craig Brosinski, David Chambers, Mark Glowacz, Brian Lee
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

[@wittworks]

To start comparing quotes and simplify insurance buying, check out Policygenius: policygenius.com/wittworks.

[@JeffYantha]

Speaking of quotes, that was a great one from your therapist! 🤣

[@wittworks]

PAID SO MUCH FOR THAT ONE

[@JeffYantha]

@@wittworks be it in blood, sweat, or tears, we all gotta pay our toll

[@jackheilmann3739]

Did you reference the Scarlet Pimpernel???? What the what?!

[@makenchips]

Yes! 3D printing

[@ryandury]

The only thing I disagree with is that you said you're not a real channel. You could argue that the smaller channels are actually more real than the larger ones :)

[@wittworks]

very true! I was saying "real" with sarcastic quotes

[@ryandury]

Cheers@@wittworks , love the content. Keep it up :)

[@Str8UpRevving]

IMO, seems like the big channels are just sponsor sell outs. If it works, more power to them. I just prefer to make things on a budget. And most of the time, the tools are budget friendly.

[@Segphalt]

The "real" channels turn into affiliate salesmen in a hurry and just get an unsubscribe from me.

[@Aaron-nj4ou]

Couldn’t agree more. My favorite part is when they tell me they are “unbiased” as their entire shop is covered in a specific brand.

[@Buildistics]

Yes, a video on 3D printing for woodworkers would be awesome! 💥

[@clcphoto]

Agree. I really want to start designing things but I'm currently stuck on figuring out Fusion360

[@ExTexan]

+1 on the 3D printer video. 👍🖖

[@Tensquaremetreworkshop]

There are plenty already. Try 'Darren's workshop' - he has done dozens of videos on this topic. Many of my own toolholders are printed, and I use printed trays for components, color coded to the size. Tool handles, jigs, clips, there is no end...

[@ryanbrooks3241]

Witt, I second this. I am a beginner woodworker and have started incorporating project specific 3D printed jigs (mostly router templates). Would love to see a video from you on this. Keep up the great work!

[@jamescamper4906]

yes,yes,yes please

[@brianhdenver7551]

“The person that works with their minds must rest with their hands” is brilliant. I’m on a computer all day working in CAD, and wood working has been a really healthy hobby to create something tangible.

[@wittworks]

thats why!

[@theepebble214]

I've been working on sewing & piano lately, I end up on Revit all days as well and its super nice to see a tangible change in the evenings.

[@kaymack5304]

My hyper fixation on organization means I could watch this all day. Genius!

[@OzzieOzwald]

I can really appreciate as a new wood worker, that this channel isn't a "you need to buy this and buy that" type of channel. Thanks for the awesome content.

[@wittworks]

Thanks 👍

[@christopherlamoureux8617]

It blows my mind that you have become so integral to the community. You've been brought up in every podcast that i listen to, in a positive way, yet you are a smaller channel... you shouldn't be. I appreciate you, we appreciate you. I think i can speak for all of us when I say that we are enjoying seeing your channel grow, and feel you deserve so much more.

[@wittworks]

Thanks! The massive debt I have taken off to pay for all these podcast mentions…it’s crushing…actually…I have no idea how it happened. Grateful though. 🙏

[@FixtheGodofBiscuits]

A guide to 3D printing for woodworkers? Yes, yes, a thousand times yes! I'm interested in 3D printing, especially what it can do for home and shop organization, but I know absolutely nothing about it, and I've stayed on the fence about buying a printer because I'm afraid of investing a bunch of money into it, only to find that I should have bought X instead of Y. I'd love what you've done on the topic of woodworking, so I feel I could trust the thoughts and advice you'd include in a 3D printing guide.

[@TheRealPlato]

i am a novice to both woodworking and 3d printing. I paid $220 for Neptune 3 Pro, I am finding it useful and fun and infinitely easier than the options that I looked at in 2012 and 2020. The printer has good hardware, but I have some small complaints about its software. Bambu Labs is considered top of the line. Ankermake M5C is a sub-$500 option that (based only on youtube research) would be my pick if I wanted the cheapest printer that Just Works and is easy to operate. I use Blender for modeling. OnShape is probably better for you. MakersMuse has an excellent video titled "Selecting a free 3D CAD option" discussing differences and has modeling tutorials too.

[@hansangb]

And "yes, please" on breaking down the 3D printing. It's a perfect compliment to shop greatness to borrow a phrase.

[@wittworks]

You got it!

[@igoslomo]

I’m a 61yo new woodworker and I love your channel! And I love my new hobby… who’d have thought I’d discover a new hobby in my 60s??!! I’m struggling right now with organization so this video was very timely. Thank you. As for 3d printing? I’m dying to learn but am very intimidated - buuittttt probably won’t let that stop me. Would love a series on how a woodworker gets started with 3D printing.❤

[@AGlimpseInside]

What can I say but thank you. Your support is greatly appreciated. Also, what you’ve done in this video to me. Is the most fun part about setting up a shop. The trial and error finding customizable. Perfect little spaces for things. Absolutely love this.

[@wittworks]

I will not be a part of your french cleat system...ok...maybe a little...thanks for showing me the way

[@nosreuter]

The line "from when they had that proctologist sell..." came so out off the blue it made me blow my nose clean from a sudden burst of laughter 😂 I love your sense of humour!

[@handmadeprecision]

Great work Drew! I'd love to see a 3D printing video.

[@sumpfsocke]

Dude has more "scraps" than I have good wood boards stored in my workshop

[@MrsAdiletta]

madly jealous of this shop - the tools, the cleanliness, the light, the organization!!

[@nerdynerfdad]

Everything about this video is awesome. Especially your Roy Kent bit followed by the hot mother joke. So great.

[@onehappydawg]

I have my small shop somewhat organized…..one of the best feelings in the world is after I get through working on a project, when I hang everything back up and put everything back in its place, then vacuum up all the saw dust and blow all the remaining dust out with my air hose. Everything is organized and clean for the moment. It’s like a blank canvas and I’m ready to start creating again 😎

[@Aeroliten]

Cant believe you arent at 500k subscribers yet... Mark my words, your videos deserve to be seen by all new and old woodworkers

[@wittworks]

where do I send the check?

[@thomashendricks9774]

We just moved into a new house and I can have my own shop for the first time. I just purchased two sheets of Peg Board, because thats how I thought shops should look. All my friends have Peg Board, Peg Board is everywhere. However I think you convinced me to go your route. Thank you!

[@kevola5739]

I luv my pegboard. My shop is constantly evolving and keeping things seen and not hoarded has made this constant evolution the most efficient at reorganizing. Pegboard 4 feet down from the 8 foot ceiling covers 3 out of 4 walls of my shop. I had to cover it with something so this made it look consistent in spite of things constantly moving. From building projects to staining lawn furniture to bike club meetings to snowblower tuneup with half a dozen neighbours to having a beer while sweeping up at days end. After 40 years in my shop putting everything on wheels, good lighting, and pegboard were 3 of my better decisions. Heating the shop was the absolute best decision I ever made. Buying a huge box of pegboard hooks from a shop shutdown sale still leaves me with hanging options.

[@StsFiveOneLima]

YES, do the 3D printing shop guide. 3D printing for us dummies who just make stuff out of wood 🙂

[@ShopNation]

So much Shop Greatness. God what a good video

[@wittworks]

Who are you again?

[@jesseelovaas]

Love it! This is exactly the reason I started watching woodworking KZbinrs. For amazing ideas like this for my shop.

[@rbzbreezy]

With all my favorites out there. I have to admit, adding you to my current regimen of woodworking videos was a battle I had. I didn’t want to like you at first. It was inevitable, why is everyone in this community so awesome. Welcome to my list of favorites.

What's actually stupid is -> me watching many of your videos over the months and realizing right now that I wasn't a subscriber LOL. I am now part of it with full notifications on. Seriously you're really good at making interesting videos and totally deserve way more subs!

[@shitbmxrider]

JFC, I just sat bolt upright on the couch watching this at 1.19am with that "the person who works with their mind" quote. My word, that has brought together some thoughts I have been mulling over for months, thank you for sharing this

[@wittworks]

thank you. good luck on your bmx career. I know you can turn pro.

[@marylines4546]

YES!!! 3D Printing for woodworkers!!! I bought my 3D printer about 6 months ago and have been printing battery holders and other things I can find online to have better organization in my shop. My biggest problem is finding free files that are specific to woodworkers. I haven't yet had the time to learn the software to create my own files and would love to have more options for the things I use daily. As soon as I do, I would be more than willing to share my files for free. Maybe a 3D printing series that would demonstrate how to create these files? That "wood" be much appreciated (see what I did there :))

[@gajadraws]

hi, I don't know if you'll ever see this comment but I just wanted to say that this morning I found your videos and I NEVER felt more understood in my whole entire life (as a creative person) and you gave me so many awesome ideas!!! I really can't thank you enough because this video got stuck in my head and you brightened my day😭 now I have a new perception and concept of everything and I feel like I can express my creativity even more!!! thank you from the bottom of my heart, truly, keep up with your videos❤ love from Italy❤

[@wittworks]

Thanks

[@garymiller5937]

You just showed me some of the most genius storage ideas I've ever seen. I can't thank you enough!!! I too am a firm believer in using what you have instead of buying new. I guess I got that from my Dad, who saved every scrap of wood, etc. This is an awesome video and I give you a 5 star review. Thank you so much!! 😊😊😊😊😊❤❤❤❤❤

[@jrockwing]

Just wanna say your b roll and lighting are top notch, nice cameras too 👌🏼

[@scorpiorysing]

It's amazing to me that you ONLY have 65k subs. I find this channel as good as some of channels with much larger subs.

[@Shadoweclipse1386]

This is great. I too am a big fan of Mr. Savage's perspectives on shop infrastructure. He's quite intuitive and wise about how he organizes his space. I've been doing similar things, at times making a whole weekend around tool storage and cleaning up as well. The only thing I do really different from you is that when I make specific tool holders, I mount them to French cleats on my walls, so I don't have to think about where the tool storage goes in the moment too hard. You can always change things up at the drop of a hat. French cleats were a game changer for me.

[@PaganWizard]

Please do a video on 3D printing for woodworkers. BTW, this has to be one of the best "shop upgrade" videos that I have seen in a very long time.

[@ninenailswoodshop]

Release the 3D printing video! One of my favorite things about your videos is the stories woven throughout. I’d almost be more interested in the stories behind your 3D printing over the actual content! They are all very inspiring!

[@TheGabb3r]

Funny how your storage ideas come at just the right time, I was currently in the process of creating a more fluid work space in my lil' shop. I'll be borrowing some of these, thanks Drew, great video as always!

[@wittworks]

that's great! would love to see what you come up with

[@G.I.JeffsWorkbench]

Great advice. I caught the French Cleat virus, and it transformed my 1-car garage shop. I found great enjoyment in creating & building the “fixtures“ for the wall. Love the twist on your usual tool brand humor (“WoodFreight” square, red “Hart” square). Seriously, I’m going to try to remember & apply the 1st, 2nd, 3d order of priority use something or other.

[@bartman59laj55]

Wow, talk about good timing. Your video came up just as I’m finishing insulating and throwing up OSB on the walls of my shop. Next step is organizing all the tools and accessories I’ve collected over 50 years of building stuff. Thanks for the ideas, liked and subscribed

[@OutrageousAspect]

I stumbled onto your chanel this morning, im not a woodworker, at all. Im an artist and crafty, but my mind exploded with the possibilities watching this and your shop drawers/cabnets video. Thanks! I'll be watching, I like the way you do things and think.

[@RCake]

Drew, for me this was among your best and definitely most entertaining videos ever - thank you 🤩 I absolutely loved the second yellow-handled chisel first disappearing, then showing up in the bin, then being saved after all 😂

[@J4Julz]

I love this video so much. Thanks for putting it all out there, lots of little possible ideas to get my go-tos right there where I need them. Bravo!

[@billyblackie9417]

These are really great tips and I'm organising my workshop putting everyday needed tools nearby and occasionally used tools further away. Trust me your channel is very real and in the bigger channels they show how they make things instead of showing the audience how they can make things and are only a waste of time to watch

[@frankiepezzolla]

You may have less subs than other maker channels but your humbleness, talent & ability to think outside the box sperates you from most in a positive way. Your love of the work you perform shows in your attention to detail & amazing ability to teach it through your effective communication. Keep up the great content & you will see your subscriptions climb & your dreams all come to life. God bless you & your family.

[@macfanguy]

I love the production quality of this video! Very inspiring.

[@phalypso]

You came in on my feed. IWoodworking aside, I like the wit, humor and quick parenthetics. Subbed.

[@wittworks]

(thx)

[@anchor4346]

You got me with.. " I don't have a wall of really expensive Woodpeckers tools" You are my kind of woodworker.

[@nicholaswerthmann5641]

Absolutely yes to 3d printing for the woodworker!! Also I’d love to see more about your Ron Paulk style drawers, I’ve been wanting build a similar bank of drawers for my shop, I even bought the smart trailer plans back in 2020 to do just that. The video you did for him actually brought me to your channel. I must say I’ve not been disappointed. Keep up the great work and thank you for the inspiration.

[@JCMoorer]

Drew your videos are some of my absolute favorites to watch. Thank you for making them! My track saw plug thingy is working so well. 👍🏻

[@wittworks]

Great to hear!

[@grahamcairns2249]

I just wanted to comment and say how much I loved this video. I believe you have ignited a passion to build organization for my shop(garage). Thank you so much for this!

[@timhoffman-jj9dd]

I can tell you how much I enjoy your channel. Ok, well I guess I kind of just did. This was inspiring. I have been in shop set up mode for a month now trying to get ready to start my at home business and this was an eye opener. Thanks again and keep on keeping on!

[@udp1073]

just found your channel AND I am already a subscriber, amazing video. there is a real psy value in organizing and decluttering, it start with simple stuff, like your desk or a drawer and payback big times, then, when it jumps to a higher level, like a complete shop (and what a shop you have Sir) then it can really be a transforming experience, because from that point on, you will not apporoach any stuff in life like you previously did... it is like doing thing (any and every thing) witha "less clutter" mentality, which most of the time means also less waste of resource et all. truly an inspiring video, thanks a lot for sharing

[@bradrhodes7055]

Wow. This video was awesome. So many ideas. And i agree with you about how satisfying and stress reducing this stuff can be. I solve massive, complex and stressful problems all day at work. Solving small problems feels so good. I've been convinced i need French cleats but this helped me realize that while i still think cleats are awesome, i don't need them for everything. I've seen dozens of KZbin videos and most are really the same but this is the first one in a while that i found really unique. It triggered my thinking, gave me some ideas and got me excited. Great job. I'm excited to see more from you.

[@vilod]

My new favorite channel. Love how you call out others channels.

[@amrand82]

Best woodworking video I’ve watched in months. So refreshing. Thank you. And yes, a starter guide to 3D printing would be amazing. It feels like just “another thing” to get into and that’s putting me off.

[@Patrickitron]

I covered my first shop in our basement utility room with four walls of pegboards! I was so proud. Making your own tool holders was such a revelation. I use those peg boards now to hang an eclectic mix of all the crap I make. It's ever-changing. It's like a museum exhibit. So I guess it's good for that. After this video, I think you have convinced me to get rid of the last remnants of pegboard in my new show. Really great Ideas! Thanks.

[@davidmeyer9204]

Yes to the 3D printing for woodworkers video or series of videos. You know I am going to steal most if not all of what you showed us today. Great job Drew. Thanks for sharing!

[@justinkeller4008]

Inspiring. Thanks. I've been eyeing that fancy metal pegboard

[@jasonhagen]

Fantastic video Drew! I loved all the easter eggs throughout the video! This gave me a few items for things I want to make! Keep up the great content!

[@johnhanley5235]

Just discovered your channel and it’s already my fav woodworking. I love all the tips and you general anti-gate keeping vibe.

[@wittworks]

Thank you! I strongly gate keep all the gate keepers.

[@daifeichu]

Thanks for doing a video like this to help me, and hopefully others, to get their backside in gear and get their shop in order. I put up peg-board years ago and I hate it as well. It's really fun when you're grabbing something from it and end up knocking something else off. I have made a few nice holders right beside the peg-board but I just decided that the peg-board is coming down this weekend.

[@chadjewsbury6167]

Yes to the 3D printing video! I’ve been toying with getting one and am overwhelmed by the options. love your editing style and content!

[@Damon_Barber]

I was taking a drink of my coffee when you made that comment about getting your gloves from HF… thanks, Drew…I almost choked! 😂😂😂

[@wittworks]

👆

[@Damon_Barber]

@@wittworks 😱😱😱

[@oakandaxecustom]

Thank you for the encouragement to organize my shop more. Lots of great ideas! Keep up the good work!

[@rodgerbright3764]

Excellent! For years, I’ve been using plywood as my backdrop. The main differences, I simply paint mine with chalkboard paint, and then use different lengths of gold screws with a little bit of tubing over it, and then I placed my tools extremely close together, and then outline them with a piece of chalk. Moving things around is super simple.I only make actual holders like you have when the tool absolutely requires it. But similar concepts and I really like. I’m going to incorporate some of your ideas.

[@tcbridges]

Just found your video and I think you are one of the best I have watched and am learning from. Keep them coming. Would love to learn how to use a 3D printer. I haven't bought one because I don't know much about them to spend that kind of money on it. I am 76 and just got into woodworking 3 years ago. I got hooked on Festool and Harvey. Bad for a retired old man. Ty

[@jon.parsons]

Easily one of the best videos I’ve seen on tool storage! Comes at the right time too, as I’m in the middle of re-arranging my workshop and was about to go buy more pegboard…

[@jkleczewski]

This! This is why I subscribed a while back... Love this

[@YH_1917]

love your workspace

[@ZachAshcraft]

Some really great ideas in here. French cleats have never worked for me. I love the idea of having everything instantly accessible right where I need it. Think I need to make a trip to Plywood Co. and line my garage this week

[@BigBadBaj71]

I decided to put this on in the background as I was waking up...I work third shift. Unfortunately been out of work for a while due to some as of yet unknown medical reason but I digress, I've been spending the time in the basement getting my old workbench / shop area in working order again. It's been about 10 years since I really used it. Life happens and it was always a place I could escape to, And I needed it now. It was hidden under 15 years of accumulation of now passed friends and family member's tools/stuff(some I had to look up online because I didn't know what it was or what it did). When you said "He who works with his mind must rest with his hands" I had to rewind it and listen again because that's what I've been doing my whole life but never heard it put to words. You've gained a new subscriber, not that I watch a lot but.... I've had to figure out ways to hang everything from the big floor beams overhead because the walls are made of the rock from the river 300 yd away and impossible to mount shelves or pegboard on.

[@RedDirt_Cowboy]

GREAT video my friend. Im about to build a work bench in my corner of the garage. Dont have much room because we have 5 kids and the wife parks in the garage as well. So this video is a HUGE room saver for me. You are the MAN!!! Salute to you!

[@rDunfee]

3D printing for woodworkers sounds great! I've been printing for over a decade but I always love fresh takes

[@ElmntFire]

When we bought our home and I finally got space for a shop, I inherited a used door for a workbench and a pegboard backer. This is the inspiration I needed to finally get rid of the pegboard and start storing properly.

[@wittworks]

that's where I started! Not bad, but lots to improve on!

[@truker1970]

I've been wracking my brain and wanting to get away from the pegboard in my shop and your video just gave me a ton of idea's on what to do. Time to let the mind rest and put the hands to work. Great vid, thanks.

[@pecantreedesign]

Great tips. Shop organization should be a habit, not a chore, and personal! These are universal tips.

[@advancednutritioninc908]

Great idea on 3 D printing for the wood worker!! Yes! Thank You! This was a great video on organization !!!

[@brianhansen4217]

Just discovered your channel today after a couple months watching the "big names" in woodworking on youtube. Love your style and content, keep it up and you'll compete with the best of them.

[@PaulTWOS]

Absolutely... 3D printing for woodworkers is a must.

[@IanCazabat]

I think a 3D printing for woodworkers video would be awesome!

[@franks4973]

You have some really nice simple ideas. Thank you. For me it’s about those odd shaped tools that take up a lot of space.

[@NanaStillLearning]

I’ll probably never have a 3D printer but I love videos that show the interesting things you can do with them. Loving this video. I bought a pegboard last year and never put it up. My project this week is to get organized so this couldn’t have come at a better time.

[@Peaceout4337]

This is the best video I’ve seen! Thank you!

[@normanbott]

Totally agree with the pegboard rite of passage. I started with that and the awful Terry spring clips ! My wall mounted tool cabinet has all the custom shaped wooden holders, including in the 2 fully opening doors. Drill bits, Forstners, sanding drums etc on the wall behind /next to drill press. As a hobbyist , time is precious so a well organised shop means more productivity and a whole lot less stress for me. Brilliant video.

[@JBCavern]

This was my first time here. I'm inspired and have subscribed. I look forward to learning from you.

[@davidd4944]

This is maybe the best KZbin video I've ever seen. I'm going to watch this in slow motion over and over. It's mind melting how many ideas are here. PLEASE do the 3D printing video. I love 3D printing and designing in Fusion360, but struggle with reasons to use it. Is the Shaper Frame useful for 3D printing? I had dismissed it because I don't have an Origin or a laser.

[@fred0c]

Love "Satisfaction City" , should make a sign for it!

[@claybowser698]

Very helpful! I was looking forward to this video. My town has about 2000 people. Harbor Freight, Lowe's and Walmart are like 20 miles away. Most of my tools are from the cheap seats but I still like them meticulously organized and cared for. My chisels are all really cheap Harbor Freight and box store stuff and after some work on them, they are excellent tools. Some of my most treasured tools are from garage sales, church fundraising tools sales and thrift stores. I got a Stanley Bailey 4 1/2 hand plane for like 17 bucks! Anyway thanks a bunch for cool videos.

[@greggcoulter6008]

Great video. Love how you incorporated many different ways and ideas

[@57z]

I’ve been a sub since around 30k. But I’m super shocked you’re still below 100k. Your no holds barred approach to being real with the audience makes this one of my favorite channels. Regarding 3D printing insight please do! I’d like to see how you go from initial conception to actual modeling on your computer to finished piece. What is your editorial process? How do you get the design into the machine?

[@AaronGeller]

Commenting on his videos like this helps get more views which leads to more subs 😊

[@helderlage]

I am not a creator, nor will I ever have the ability to be one. But I am an admirer of those who create, using simple and accessible materials, ideas and tools. Genius is almost always in the ability to simplify what seems complex. Your channel is still modest, I understand, but there are channels with millions of followers that are much less interesting. I hope you never lose your simplicity. Accept a European hug!

[@adamwhite7762]

What a really good, well thought out and excellently presented project. As a fellow woodworker, shop organization has often eluded me. Not long ago I became the owner of a pretty nice work space but it needs a dose of tlc and your simplification of this undertaking feels like the push I’ve needed. I also really enjoyed your commentary. You’ve just gained a subscriber! Keep up the good work.

[@wittworks]

thank you

[@AnneDougherty]

Very cool approach, and a great way to get to know your equipment and feel ownership over your shop. Thank you for sharing.

[@johnmadden9575]

This is great! Started to use this type of approach cause my shop is overwhelmingly disorganized. Time for me to ADD proof the shop and make it my own. Thanks for the ideas!

[@thehobbymachinistnz]

Thanks for making and sharing this video. You have given me 101 ideas for more efficient storage in my shop.

[@scott98390]

The thing I love most about this video is all the shoutouts to the other channels that I follow.

[@aaronbuchholz2510]

This was a helpful video. Thanks for making it.

[@johnjss]

Another great video Drew!

[@jameswieler3295]

great track saw holder for the garage door idea!!!

[@lucasjw]

Love to see a video on 3D printing - basics, woodworking related, but also those tool holders you have that flex to hold things. How do you design, size, and generally plan for elements you intend to have flex as part of the piece’s overall function.

[@davidbourland8118]

Excellent approach and examples.

[@jvmarino]

I love that thing you said “when you work with your mind you rest with you hands “ or whatever…. This is why the of us who do the construction life have just tons of “doom bins” piled up in our garages lol