www.xtool.com/... to get a discount on qualifying purchases, use the link. Your coupon code should fill in automatically, but if it doesn't, it is xToolMaking
Пікірлер: 36
@Kimberlymogan3 ай бұрын
A couple tips that may help, or give another option. *To put in a size that’s .xx. Start by putting a zero and then the dot and your numbers ( 0.18) *When you have a small spaces or want to be a little more exact on placement, choose outline on your framing instead of rectangle. You will see an outline of the actual design instead of the size of the largest parts. *Blue light can in fact engrave on stainless steel jewelry without marking spray, and you can get colors on both lasers. I wish I could show a photo here for you of my test tag. *Instead of trying to set up the placement on the bed, click outline, framing, and then use your mouse to move the design around a little at a time until it’s close to where you want it, then use your arrow keys to fine tune it to perfection, when perfect click stop framing, proceed * If you are doing more than one, place the locating bracket on the bed, line up the product against it on both angles. When you finished the first and are just changing the name, all you have to do I’d place the next product against the bracket and double click the text and retype . That’s it. Ready to go
@MakingwithMarilyn3 ай бұрын
Thank you for the tips. I was told that if I update my software, the issue with the .xx will be fixed. I would love to see your picture. You can either email it to me or you can join the Facebook group and post a picture there. Let me know if either of those are an option for you.
@Kimberlymogan3 ай бұрын
@@MakingwithMarilyn I emailed you
@jewelgallery1716Ай бұрын
Is this compatible with a Mac computer?
@MakingwithMarilynАй бұрын
Yes, a Mac is what I use with it.
@HeatherHunterJ10 ай бұрын
yes yes yes OH Thank You Marilyn for showing us all of your wonderful tools AND creations!!!
@MakingwithMarilyn10 ай бұрын
Thank you Heather!!!
@rickthompson37544 ай бұрын
Hi Marilyn, like your videos. I find they are very helpful for me when I watch you interact with your media and show what your doing on the PC at the same time. Quick question, could you put masking tape on the bracelets to help with the framing?
@MakingwithMarilyn4 ай бұрын
Thank you very much! I haven't tried engraving through a painter's tape but I will try that out.
@benjaminpastrana966210 ай бұрын
🙌you don’t have to delete the name when making another, just rename it in place. Also previewing as object mode instead of rectangle will show a better view, it happened to me the square shows is centered and aligned but then the letters are engraved too high or too low. I bought a magnifying loupe🤓
@MakingwithMarilyn10 ай бұрын
The magnification is a great idea, thanks.
@TubeDaLube10 ай бұрын
Hi and thank you for your informative and inspirational videos 👌This is just my personal preference,but i find it much easier to move the item to be engraved to the framed area.Just make the text/shape to be engraved in the software,hit framing,and then move the item into the frame,done,perfect fit each time.And also the outline framing is great sometimes.
@MakingwithMarilyn10 ай бұрын
Thank you so much for sharing your tip. I often do it that way too, but I was afraid the tiny little bracelet wouldn't be straight:) I may try it that way next time, though.
@naiaram26616 ай бұрын
Hello! I want to engrave silver jewelry but I don't want the engraving to be too dark. Can you put a clear engraving? fine? thank you so much
@MakingwithMarilyn6 ай бұрын
You can adjust your settings to make it less dark. Also, to make your engraving fine, you would use a fine narrow font.
@debbiecastonguay52883 ай бұрын
What is the name of the font?
@MakingwithMarilyn3 ай бұрын
Ashley Southine.
@debbiecastonguay52883 ай бұрын
@@MakingwithMarilyn thank you
@preciouspeaces10 ай бұрын
Marilynn👋🏽looks really nice🤔I would like to have an engraving machine😮
@MakingwithMarilyn10 ай бұрын
Thank you, Nicole!
@CarolSuesCreations10 ай бұрын
When you frame it, do you look for laser to simulate the engrave like when with embroidery
@MakingwithMarilyn10 ай бұрын
Yes, that is one way. The other option is to frame around the very outside. It’s nice to have both options.
@CarolSuesCreations10 ай бұрын
I got the deluxe package with RA 2 rotary, extension table and air assist.. also get free Black Friday gift. Think maybe got tracking for next week to get machine says 47.4 lbs UPS delivering assume machine and goodies
@annabassett24268 ай бұрын
How does it do with sterling silver or gold?
@MakingwithMarilyn8 ай бұрын
I'm sorry, but I haven't used it with those materials.
@chrissmithcollavo301510 ай бұрын
Omg....how do you find anything on that desktop? It's loaded! 😂😅❤
@MakingwithMarilyn10 ай бұрын
I know Chris!!! It is so bad! I really need to do something about it:)
@alexgutierrez512310 ай бұрын
That was really cool to watch. I could see the dot moving back and forth. Turned out very nice. Nice machine as well. 🖖