Makita Robot Mower is Almost Here! And New Nailers, Grease Guns, Dustless Circ Saws and More!

[@martin8313]

The loop at 2:50 is for sockets that break intentionally when they’re at the end of their life cycle or under too much stress. The piece that the string is tied to would otherwise fall.

[@thekiwinomad]

Still waiting on the xgt Multi tool. Lol

[@wessel7972]

Me to

[@Moxxi]

and orbital sander? honestly just everything, i need more xgt in my life

[@thekiwinomad]

@@Moxxi yeah mate. Personally I use a third sheet sander over a random Orbital sander just because the sheets or sand paper are cheaper lol

[@vijilant]

Why do we have to choose between charging dock OR batteries? For the lawnmower robot and vacuum robot and stick vacs etc, should really take regular batteries and also be able to charge on a dock without removing them.

[@danwatts8269]

xgt multi tool and sander would be great

[@wessel7972]

You’re just the best. Mister tools. Thanks again

[@ToolsAndStuffOFFICIAL]

You are very welcome

[@andrewm6829]

Any update on the modular tool storage system?

[@aaronoconnor606]

I don't get why makita haven't made those little saws with track that connects to them. so you can use them like the festool or mafell cross cut saws. Do that on a 6 inch saw with a high output 40v 4Ah battery and sell it for 200 or 300 less then festool or mafells kits and they would do well on it.

[@jons6125]

Do any mowers use GPS and wire? The wire ones waste a lot of time doing a random pattern. A combination of overall location and precision edge identification would be ideal.

[@vilnz]

Hm, Makitas lawn robot looks suspiciously similar to Husquarna lawn mover, actually almost exact as the 420 model.

[@wearsjorge55]

Im ok with a wire set up. Its quicker to chop and change and create custom arrangements like that tree barrier we see in the demo vid

[@iainfenwick2433]

The loop under impact driver, think multiple bits. Robinson, torx, pozi bits all on strings, not going missing especially up a ladder

[@ToolsAndStuffOFFICIAL]

I can't think of anything more annoying than bits swinging from the front of my impact and getting in the way.

[@JackyHorror]

Need. XGT multi tool XGT Leaf Blower/Vacuum

[@richardfischer1986]

I don't know if you covered it or not, but Makita also had a 40V max XGT® Walk Behind Floor Sweeper (GSV01) at the world of concrete. Another interesting find is the latest brochure on Makita France on p4 seems to show a bl4025f high output battery possibly.

[@EliotTruelove]

Definitely excited about the Brad nailer, i have the Mikwaukee 18 hauge on a battery adapter and it works good, but id love a dedicated serviceable version from Makita.

[@ArtemX988]

If this is kind of new battery tech so 550gramm battery would be really perfect for compact xgt tools.

[@zeevzafrin3314]

Thank you 🙏 always interesting and informative

[@patbird9694]

Still waiting on a Makita LXT 76mm belt sander too.

[@jayquick6520]

They just up and left the CXT platform in the prom night dumpster lol I remember when their original offerings were the best available and now the original offerings are the current offerings a decade later.

[@xXstrattXx]

When are they going to update the high torque lxt impact? We don't need a 150 versions of circular saws and impact drivers

[@nathangardner772]

2 battery? 1 battery? Either platform 1/2 collet plunge router 😊

[@dbrown2010]

No 40V multitool ?

[@HexenzirkelZuluhed]

Since you seem to want the questions: any idea about the international dtd173 release date? It's been a while since your video and yet, no sign of it =(

[@f.alonsosantiago3200]

En la página 72 del catálogo 2024 de Makita Francia aparece el DTD173 como disponible en el segundo semestre. Saludos

[@HexenzirkelZuluhed]

@@f.alonsosantiago3200 Thanks for the info.

[@alexpieleanu5759]

Where can I buy those straps ? are exclusive for Japan tools? Thank you!

[@zarajoe1]

I like my lxt 16g nailer. The quarter of a second wait when you pull the trigger is not a big deal to me. Edit: My 3/4 xgt impact leaks grease and pushes the gasket out all the time had it sent off twice now and it's starting to happen again Another edit: please get the xgt grease gun out I ould very much like one. Your lxt one already works very well. Just rewire it for 36v and get it out the door

[@CarbideEndMill]

The larger side of the saw base being on the timber is completely circumstantial and subjective as to what you’re doing. When ripping sheet goods left side blade mostly benefits right handedness

[@ToolsAndStuffOFFICIAL]

I was referring to cross cuts.

[@toolscientist]

Tether must be specifically for working at heights. Someone in japan prob had a philips bit land on their head. 300 pages of reporting later and now all workers at height have to secure their bits. Edit: Having said that, Japan is one of the loosest countries for height safety. Saw so many dodgy ladders permanently tied with rope to 60deg roofs, and even saw a guy 4 stories up in Tokyo changing an old school paper billboard with no harness and just his hooked ladder loosely tied on.

[@kizzjd9578]

Youve obviously never seen a sparky installing solar in australia, they all wear harnesses but dont actually tie themselves on to anything lol

[@wearsjorge55]

​@kizzjd9578 the old "if people take a picture at least you've got your harness on" but no one thinks to question why there's no tie to the roof 😂

[@woots2621]

many brushcutters - but not a handlebar as a powerhead / multi tool option?

[@wearetheremnants1615]

Xgt orbital sander please

[@ragtagrider4247]

I need a cable stapler

[@rbproductions78]

Oh bro... any idea when the framing nailer is coming out? 😉😂😂

[@ToolsAndStuffOFFICIAL]

Yes

[@maf2018]

table saw?

[@couchdweller9364]

Cordless tablesaw ?

[@ToolsAndStuffOFFICIAL]

What's that?

[@olgajoachimosmundsen4647]

Until Makita lxt comes out with a 8ah performance battery I think the kne is a dead end. The x2 system is not great, especially as Dewalt and Milwaukee can do the same with one battery.

[@roberttoth8527]

Yes, but you can use this batteries only on specific tools or no more balance or place to grab some other tools like dewalt plunge saw. Two batteries are fine for me even four if its needed and well balanced. 40 volt ones.... hmmm I dont really like them.

[@riba2233]

@@roberttoth8527 40v ones are awesome trust me

[@robertrada4783]

Thus far, the build quality on the cordless grease guns available is utterly shameful. It’s nice to see a Makita one coming.

[@kizzjd9578]

Makita lxt been out for a while

[@AbcdEfgh-zp1sn]

We use Milwaukee grease guns never had an issue

[@kizzjd9578]

@@AbcdEfgh-zp1sn milwaukee guns are poorly built if you open them up. Very over priced, not sure how the makita compares.

[@riba2233]

4:55 paint me like one of your french girls 😅

[@MuxaH81]

Красавчик!

[@mack9531]

That tether is for north American style bits. The Japanese bit have a higher shoulder than the american and the bits tend to fall out of the chuck.

[@nickp3270]

the nailer looks like the old brad nailer hopefully thhey use compressed air thats easily refillable.....unlike milwaukee who makes you take apart the whole casing and uses nitrogen

[@pete_lind]

You can use compressed air in Milwaukee and not pay $100 for refill, but it is not as easy to refill as Hikoki, remove a lid to get to refill.

[@nickp3270]

@@pete_lind yeah i know but its just stupid that they make you take the whole thing apart i would never pay to send it back to them lol thats what they want

[@prototype3a]

I've worked jobs where EVERYTHING has to be on a tether. It's not just so you can't drop things but more so such that nothing can be accidentally left inside the equipment being worked on.

[@bajanspx]

Makita's 18 awg brad nailer and the terrible reviews of it is the reason I got on to the Ryobi platform when I was looking for a cordless nailer. Once I had those batteries I bought a few more Ryobi tools in other areas Makita is also weak in such as cordless ratchets.

[@tobysure123]

Ryobi eh 😂

[@richiejames928]

Woo wooo wooo woooo wooooooo no angle grinders??? poor old me angle grinder chief designer at Makita must of been sacked.

[@robertrada4783]

Oh darn, I’m not first.

[@ToolsAndStuffOFFICIAL]

But at least you're not last.

[@sassall4284]

Can’t believe you said blades on the right are better 😢😢😢 disappointing haha

[@frenchyroastify]

Most people cut with their right hand, thus weight of the saw on left side and holding timber with left hand.

[@sassall4284]

@@frenchyroastify I’m right handed and use a left blade any day and so do most people I know.

[@sassall4284]

@@frenchyroastify I’d never go back to a right blade.

[@tobysure123]

Right hand wrong

[@percival23]

This all seems great until Maximum Overdrive 2 comes out.

[@olgajoachimosmundsen4647]

First

[@GG-mj8vw]

16g is just as bad 😂

[@arturasnesakysiu1684]

why they didint made replacable battery to use what you have. Right now people have bunch of batterys would be happy to use them non stop, also wire is garbage, other companies make gps type and ignore all wire problems, there is plenty of cheap good robots which does all no need wire and all have theyr battery replacable. what are they thinking makita is like far behind brain. why not use those replacable battery which you have from tools, it will finish those old batterys and its ok, people know ow its old battery and will buy new! sell with few big batteries like xgt line and you sell easy. i myself cant change and many people also, as petrol lawnmower is like unkilable if you bought great brand and service it

[@xzibito187]

It seems that’s makita is becoming a gardening company.

[@nils1953]

Naah, the wired mowers suck soo much. Everytime I do some yard work and plant a few things somehow the wire gets cut and I have to ruin half the garden to fish out the now sunk in wire to solder it back together. This mower is also the stupidest kind, as in literally stupid, just bouncing from one end of a wire, turning some amount and randomly going off again. There are so many better mowers now that actually keep track of the mowing progress, this is obsolete and just technology I had on my 2014 Worx mower. Doubt Makita builds this thing themselves, if they do this is embarrassing

[@Arturas1244]

lawnmover is garbage dont buy. other brands basically all of them, has lawnmover where you change battery from your tools. this means than battery dies and it willl die in lawnmover in makita you will need to buy all lawnmover and they cost lots of money. while on other brands you simple grab new battery stick in done. makita will not sell battery for this machine all you need to know. Now wire is horrible, it will start wire rot, in few years , water intrussion, also if you dig you will cut, soil has such ability to spit it out, than instal it will not detect and so on as wire is too deep, a ton of problems you forget and you cut wire, or lawncare company does that or you do that with trimmer while edging and so on. if you want to plant new plant than again you need to redig redone all. with gps is simple you make them once done made mistake and you will easy to redo its soft no work, not so hard, people say hard cause of app people are dumb dont know how to use it and so on. charge point must be hidden, pin means nothing. Best machine aer simple where you make machine yourself where to go similar to vacum cleaners.