Makita Trim Router Plunge Base Review | Cordless AND Corded

[@ToolsAndStuffOFFICIAL]

Letter Templates, Bushings & Router Bits amzn.to/2ZtppGW and here rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575554439&toolid=10001&campid=5338626386&customid=Sign+template&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Drockler%2Bsign%26_sacat%3D0

[@therevealing-studiesfromli4419]

Very Good: Your explanation of each aspect of the basic router is spot on. Also, Template usage and the compatibility issue is something Makita should take note of. I will be watching the Videos that pertain to my router...Good Work!

[@marygordon9217]

Very helpful. Couldn't figure out how to use it or even attach it to my cordless router. Again, very helpful

[@gavincollins9376]

Have the same router, been using it for a few years now with the standard base. I just find it a little unstable and small. The plunge base looks a lot bigger so about time I bought one. Nice review.

[@adam.hajdany]

Thank you, your explanations are great and saved me plenty of time especially with the plunge base, happily using the DRT50 now. Just subscribed.

[@ToolsAndStuffOFFICIAL]

The second part (where I make the guide bushing template base) will be up on YT tomorrow.

[@raysmith2940]

Thanks, nice and clear and showing the pros and cons.

[@edwardchester1]

Inadvertently, this video has been a lifesaver. Been trying to find out if/how I can get guide bushings to fit the DRT50 but it has proved difficult and confusing. Turns out - as you demonstrate - those brass bushes just fit the standard base. One set winging its way to me...

[@wl1482]

May i know if this plunge based can be used with Makita trimmer router, M3701G?

[@thegoodfight365]

Well explained review 👍🏾

[@Carl270263]

Great video really helped me out ,what are the name of the guide bushes that fit the original base

[@raysmith2940]

they're called ' Guide bushes'

[@wilkinsoncarpentry6278]

I got the trimmer on it’s own but now gonna buy that accessory, thanks for this video mate👍 u said you do makita reviews, that means a subscription hahahahaha and a 🛎 cheers mate

[@ToolsAndStuffOFFICIAL]

G'day mate! Welcome aboard. Plenty of Makita reviews alright, and plenty more to come.

[@shaquedelilicss7849]

Jelli? You must spend some time in Auz. I will wait for the 40v one

[@vtd-4764]

Genius guy! 😋

[@thebigredwagon]

I bought the katsu router because I’m A cheap bastard now I’m wondering if this will fit it

[@mikey2864]

Really great. Many thanks.

[@TakamiWoodshop]

I want it ! Where'd you get those letter templates and the bushing?

[@ToolsAndStuffOFFICIAL]

I knew I would forget something from the description. There is now a link in the description. SIGNMAKERS KIT WITH BUSHING amzn.to/2UPd4th

[@ToolsAndStuffOFFICIAL]

The second part (where I make the guide bushing template base) will be up on YT tomorrow.

[@michaelplays2449]

Great review thanks

[@ssteinnyc]

Thanks, this is great. I don't see how to get it to go to the advertised 1 3/8" depth, and you show the same situation I've got, with just the bit sticking out. How do you get the bit to go deeper into the wood?

[@badbong]

I just got mine and the plunge base has a bit of a wobbel on one of the pistons (~1mm). Wondering if its just an issue with my unit or has anyone else experienced it too?

[@PMDPequenoMarceneiroDicas]

hi u discovery If wobble its normal??

[@thekarmafarmer608]

Does it fit the Makita RT0702CX4/2 240V? Cheers buddy. I bought both after reading that the plunge base fit the series. Also, AI told me that it would fit the 702 perfectly. Once aligned with the peg, I can force it on I think but am worried to in case I have to return the base.

[@ToolsAndStuffOFFICIAL]

Yes it fits that model.

[@thekarmafarmer608]

@@ToolsAndStuffOFFICIAL I managed to get it into the base but only after quite a squash. Thanks for your response though, and the great video.

[@ToolsAndStuffOFFICIAL]

@@thekarmafarmer608 It should slide in easily.

[@thekarmafarmer608]

@@ToolsAndStuffOFFICIAL I think the problem was with the clasp opening, where the lever pulls across to tighten it. The 2 `flaps` which are joined by the clasp were slightly pushed into the inside diameter of the insert. Hopefully with time this will stretch outwards. Perhaps it had a knock at fabrication. Was a little disappointed.

[@pwood3736]

I would like to ask your opinion about the on off switch for this router. I caught myself yesterday but not seriously but the on off was at fault in my opinion. Could you pm me please

[@ToolsAndStuffOFFICIAL]

I don't work for Makita... just so you know.

[@brendanwildsoet2665]

Where can you get those letter templates?

[@ToolsAndStuffOFFICIAL]

amzn.to/3gk3dWR

[@BLAZEPSI]

Nice👍 Tnx👏

[@choiceblade]

LMFAOooooo!! you got my SUB on "...Jesus-suffering-fu...". Had to pause for a sec.

[@ToolsAndStuffOFFICIAL]

I don't remember that... I will have to go watch it again. Cheers for subbing. Check out my other channel too, I am about to start giving (NEW) tools away and if you subscribe to my other channel you will have a good chance to win as only 270 people are currently eligible. kzbin.info/door/pNH6-O7WOQZ3gV6ygD2UTQ

[@sayeijamlaahadoii1156]

i don’t understand how to use this base please

[@ToolsAndStuffOFFICIAL]

Then watch the video

[@beramjayakesuma2064]

Ekspor ke Indonesia

[@andre1987eph]

Just get the Bosch corded or Dewalt Cordless.