In this short video, I describe the simple production of a 49: 1 transformer to multiply shortwave reception with an original telescopic antenna. #malachiteClone #UnUnTransformer #RXimprovement
Пікірлер: 255
@AD4C3 жыл бұрын
You should build and sell those impedance adapters, surely lots of SDR users like me, will buy it.
@berndb.50973 жыл бұрын
I love small things that are so simple but have a very big effect. That was a very good thought, Paul! Thank you and 73 Bernd
@vu2bhf3 жыл бұрын
Brilliant Idea ,matching the impedence.And the nice construction ..Thamks Paul..
@troybob75303 жыл бұрын
Excellent project video from start to the finishing outdoor test. Clear videography closeups and descriptions. You’ve provided an excellent tutorial for building a simple transformer for other devices that may also have severely mismatched, inexpensive antennas. Thank you!
@OM0ET3 жыл бұрын
Thank you so much for very kind comment! :)
@joveccyjr3 жыл бұрын
Just finished to build it! What a improvement! Thanks for sharing it. 73 de PT2JR.
@caulktel3 жыл бұрын
Thank you Paul for this very informative video, I am going to build this right away.
@chrisblue151511 ай бұрын
Wow, Paul this is very impressive improvement. Excellent work! Thank you very much for the information!
@zeferpp1rd5723 жыл бұрын
Fantastic idea with construction tricks and beautiful performance demonstration. Congratulation, Paul. Thanks for your efforts. PP1RD- Fernando, from Brasil
@OM0ET3 жыл бұрын
Thank you Fernando 😉👍
@timothycriley78482 жыл бұрын
Thanks Paul great video. We forget how important impedance matching is when just receiving. Your video production is great, easy to follow .... Thanks
@OM0ET2 жыл бұрын
Thank you so much for watching and nice comment! 🙂
@gbamck3 жыл бұрын
Wow. Nice work. Great video again Paul - cheers!
@RadioNino3 жыл бұрын
Nice !!!!!! Great idea Paul !! I will be doing the same antenna enhancement on my home made portable DSP receiver.
@rjy89603 жыл бұрын
Brilliant! Thanks for this. Excellent video. I'm waiting for my Malakit to arrive but it could be useful for my RSPdx de M0SNR
@realoldgeekster3 жыл бұрын
Great video, I am new to SDRs and your video was great to make a better mobile antenna. Thanks for posting it.
@romolodgtechnologies79583 жыл бұрын
Thank you so much. Now I know how improve the reception when mine arrives!
@patazertyui3 жыл бұрын
Really interesting video, very demonstrative. Thank you!
@mikemiles30682 жыл бұрын
Well done PAUL and the 49/1 and the 64/1 are my favorite UNUN, they just seem to always work. 73. KV5P
@robertbobbitt84482 жыл бұрын
Nice to see someone that can solder Nice project Thanks
@markg6jvy1353 жыл бұрын
Good tip and build Paul 👌 👍👏👏
@M7XCB3 жыл бұрын
1 of my favourite 49.1 great video.
@MRSZ54403 жыл бұрын
Thanks for the DIY Video I just got burnt on one of these radios I ordered a complete Malachite radio case antenna etc. and they sent me an incomplete board charging cable still trying to get my $105.00 back. This antenna project would have been great I built my first radio when I was in the boy scouts in 1966. KD6TXB
@FlattyDaz2 жыл бұрын
Well done, very practical improvement.... 👍🏼
@lucanissoli99013 жыл бұрын
Always perfect Paul 😜👍📡
@microreniassance29293 жыл бұрын
Brilliant! Now I have to get one of those radios.
@TheRenoir3 жыл бұрын
You did a great video showing simply how to make one yourself. Incredible how many hams today aren't willing to attempt for themselves such a simple project, as evident in this comment section. Thank you.
@MikesPOV2 жыл бұрын
I didn't a multitude of projects on your channel kemosabi.
@Tony-rl2fr3 жыл бұрын
Genius, thank you.
@porkyfedwell3 жыл бұрын
A different ham posted a video showing too much noise in the Malachite, and he said adding a transformer wouldn't help the problem. I guess he was wrong. Brilliant video.
@robopam3 жыл бұрын
Thanks for the valuable information!
@fernandoscrenci95553 жыл бұрын
Thanks for sharing your technical skills , concerning this unit!! Fantastic presentation on antenna mod!!
@OM0ET3 жыл бұрын
Thank you so much! :)
@mikewalsh5113 жыл бұрын
For anyone that doesn't want to build their own unun, there's one you can buy that works very well called "Magic Whip" available from Greece on Ebay.
@patriayvida42093 жыл бұрын
PLEASE I NEDD ONE OF THOSE TRANSFORMERS.... !!!!!!!! There's a Huge difference in gain. Thanks for the video my friend, very helpful and interesting. 73s from KJ4BGW
@zaperfan2 жыл бұрын
Very informative video, thank you for shearing.
@vu3mes2 жыл бұрын
Excellent 👌 I was planning to buy this RADIO.
@larrygrigar37932 жыл бұрын
This is brilliant and easy to build. :0)
@juliopereyra74223 жыл бұрын
Very good. Congratulation 👍👍
@DonzLockz2 жыл бұрын
Very interesting, big difference!👍
@DL6KA3 жыл бұрын
nice transformer it works ! well done !
@JR-lx8nn Жыл бұрын
Very good demonstration. Good language skills. 73 and happy trails to you. Thank you. JR
@OM0ET Жыл бұрын
Thank you so much!
@SuburbanDXing3 жыл бұрын
Very much enjoyed the drill method to twist the wires for the transformer. That alone was worth the price of admission here. One note; for "windings", the English version would pronounce it "wine-dings" (or the non-alcohol version: "whine-dings"), versus "wing-dings", otherwise, your English is great. Excellent work, Paul...as usual! 73! de WX0V
@OM0ET3 жыл бұрын
Thank you Scott for advise :) I am just a self learner so it helps me to learn that way ;) hihi 73 and thanks for watching as usual :D
@SuburbanDXing3 жыл бұрын
@@OM0ET The other great thing about this video, instead of just complaining about the whip antenna (as others on You Tube have), you dug into WHY it was not working, and came up with a solution. Another reason why this is my favorite You Tube channel. Superb, Paul...just superb. 73! de WX0V
@longjohn5265 ай бұрын
These are also a "must have" if you want to just clip a 20 ft wire to the whip antenna and string it across a room or toss it out a window. Or if you erect a simple longwire outdoor antenna you put one of these at the coax feedpoint. I already have a couple of these laying around but they are set up for BNC because that's what the Softrock and others homebrew units use. I also have some simple high pass, low pass and bandpass filters I'm going to convert to SMA. They can really help with these types of radios with their wide band front ends especially with wideband non-resonant antennas like a simple longwires
@michaeledmonds3027 Жыл бұрын
Outstanding Paul.....I wish a pre-made version (I'm not very handy with such gear) was available. 73s
@Kw11613 жыл бұрын
Great video thanks for the information! 73.
@eriklundqvist90322 жыл бұрын
Great video!
@OM0ET2 жыл бұрын
Thank you! 😊
@BritishBeachcomber3 жыл бұрын
Love the "grin ding" of the "win ding" ;)
@OM0ET3 жыл бұрын
OK, then let's you try to say correctly "srdiečko" 😉👍
@michaelfuchs14673 жыл бұрын
@@OM0ET He obviously didn't have the heart to even try! ♥ ☺️ "Serdietchko!" 😉
@OM0ET3 жыл бұрын
@@michaelfuchs1467 😃 yes, exactly!
@johnjuniorwayne79582 жыл бұрын
Hello from YO5OUY. Perdona si escribo en Español,se hablar mejor spanish como en Ingles! Muchas gracias,muy educativo y divertido en el mismo tiempo,me gusta tus explicaciones y tu gran paciencia, gracias para tus trabajos! Lástima para tus arañas de tus manos ! "Setenta y tres!" Thanks and 73!
@bluediamondsquaresroad5871 Жыл бұрын
That’s great!
@markmontgomery97222 жыл бұрын
great job..
@lodovicomacauda7343 жыл бұрын
Very interesting, Paul !
@kennethgibbs56663 жыл бұрын
Pure genius. Will build one for my malachite sdr radio
@antycyponek27063 жыл бұрын
finally someone with some common sense
@mabo48483 жыл бұрын
great , tnx
@ae1tpa92gwtom23 жыл бұрын
Hi Paul, I always find yr videos very interesting, this was a very gd example of impedence matching, is their an attenuaror function on the reciever? You may need it, hi hi 😀😀
@speedymartin23 жыл бұрын
Thank you very much! I am very interested how you calculate or measured to come to the result of the toroid size and windings.
@OM0ET3 жыл бұрын
here for example, but smaller version: elginradio.wordpress.com/2017/10/17/end-fed-half-wave-antennas/
Great demonstration! Have you tried with some other toroid type, for example type 2 (red) type 6 (yellow) or those cheap green ones? 43's are really hard to find.
@OM0ET3 жыл бұрын
No, I did with toroids I had currently on stock :)
@gervaziodegan2 жыл бұрын
very good project, what is the inductance of the inductor you have built?
@akademic26193 жыл бұрын
There is a requirement when using a short whip on frequencies below 20Mhz to impedance match the low
@germanjohn5626 Жыл бұрын
I prefer passive solutions over active solutions
@longjohn5265 ай бұрын
The reason for 49:1 is a longwire antenna generally as a rule of thumb has an impedance of 2450 ohms which is 49 times the 50 ohm input of a receiver. Unlike most portable shortwave receivers which already have a high impedance input you need to have some matching on these designed by amateur radio operator type receivers that have 50 ohm inputs to make a whip or random wire type antenna work. When connect put a high impedance antenna to a low impedance input you end up shunting most of the signal to ground much like a resistor voltage divider (Yes that's very simplified but for practical understanding it's essentially true for receive only applications)
@coptermangyro5083 жыл бұрын
Ďakujeme za video! 73! Hg2scs
@texhow13 жыл бұрын
Thank you Paul for this build video, I am building two versions so I can see if they are both wound correctly which I think is the most difficult to reproduce , can you please advise on which Malahite setting to use with your Transformer, Hi- z or 50 ohm please many thanks again.
@OM0ET3 жыл бұрын
The Hi-Z and 50ohm features doesn't work on chinese clones. That's why I made this transformer ;)
@texhow13 жыл бұрын
@@OM0ET Thank you Paul.
@PA1JPR3 жыл бұрын
Nice video Paul, and a great tip. Thanks alot 73 pa1jpr
@glasslinger3 жыл бұрын
You did not show the settings of the receiver. Was it set to 50 ohms or hiZ?
@OM0ET3 жыл бұрын
it doesn't matter what settings are set, because in clones without additional board will never work ;) it's for original Malachite only.
@metaldetectingfun3 жыл бұрын
Do you sell these either as a kit or preassembled?
@vidasvv3 жыл бұрын
Nice job, TNX 4 the upload! 73 N8AUM
@dannyperry8070 Жыл бұрын
Thank you for this project. I tried using this on a tinySA spectrum analyzer to see if it would improve the reception at 300 MHz. I actually got a reduction in the signal. Is there a reason why it wouldn't work on the tinySa?
@MakeDoAndMend13 жыл бұрын
Very interesting. On mine if I press Hard then the Attn button it goes from Hi Z to 50ohms. Cheers from George
@ur5scopcopter6263 жыл бұрын
👍✌
@javilarg3 жыл бұрын
Thank you for this vid. Is it worth buying this receiver? I’m a shortwave DX listener, I own a PL660 and I reckon it has a good performance, but I’d like to have a more compact receiver. 73’s.
@luigimantuano93833 жыл бұрын
Me too! PL600 and Sony ICF-SW7600G.. do these type of RXs also have a 50ohm front-end? anyone knows?
@djbmanifestomode2 жыл бұрын
Is there another option to just buy the correct antenna? If so which one? Thanks for the interesting video.
@stevec21963 жыл бұрын
What is the purpose of twisting the wire together for two turns?
@tubeDude483 жыл бұрын
Did you buy the PCB as-is, or did you make it?
@OM0ET3 жыл бұрын
I did this PCB :)
@bizmarty23 жыл бұрын
Please put these for sale on your website! PLEASE!
@matthewdavies20573 жыл бұрын
Yes please.
@OM0ET3 жыл бұрын
hmm I have to think about it ;)
@matthewdavies20573 жыл бұрын
@@OM0ET Cover it with some thick heat shrink and you've got a product. And please put a BNC or SMA on top and not an type F connector.
@petrbrazda10643 жыл бұрын
@@OM0ET If you do, it would be nice to design it in such a way, that it also works as a strain relief . Otherwise is everything too heavy for the original, board soldered SMA.
@patsyhetzel54263 жыл бұрын
Parts are available here: www.mouser.com 623-5943000301 5943000301 43 Toroid $0.29 RoHS1538-73251-3130 73251-3130 SMA RA PCB RECPT $6.14 RoHS2523-132135 132135 SMA R/A PCB PLUg $11.02
@koohlog3 жыл бұрын
question is there available in the market telescopic antena with buikt in transformer. thank you and stay safe all.
@Ixquick9798 ай бұрын
Would it be possible to install the transformer inside the case of the receiver with some kind of selection switch so that it is possible to chose between the direct connection and the transformer or would a switch cause loses in the signal?
@TEGEscalator3 жыл бұрын
73 Paul nice achievement but will 49:1 still be useful for high bands?
@OM0ET3 жыл бұрын
No, it's not work for VHF/UHF bands.
@michaelhayward95323 жыл бұрын
There used to be made an antenna called Miracle Whip that was adjustable and on Ebay is one now made in China, do you think it might work for that unit?
@OM0ET3 жыл бұрын
Hard to say, I never tryed that antenna :)
@daveys3 жыл бұрын
If it’s the same miracle whip as the original, probably will work. Inside the miracle whip unit there’s a toroid with multitaps on it. By adjusting the rotary adjuster you select a different tap. At VHF/UHF the toroid is effectively removed and the antenna length is adjusted for best results.
@brianpietrzyk89452 жыл бұрын
Great video as always! On my Malahit FW 1.10a I have a High Z/50 ohm impedance option. I think ? that does the same thing. Was that option not available when you did this video? I also happen to have a Miracle Antenna with a small onboard tuner that gives me similar results. Hope this helps. ve3bwp
@Dimon2542 жыл бұрын
He has a clone and that option works only in original Malahit (you hear "click" of a relay inside when hi-z enabled/disabled). In clones its useless..
@jwb68883 жыл бұрын
Did you try to change antenna input impedance from 50 Ohms to Hi Z in the HARD firmware option?
@OM0ET3 жыл бұрын
Chinese copies doesn't include required hardware
@bermudezhg3 жыл бұрын
WHERE CAN YOU FIND THE ANTENA CONNECTORS AS SHOWN IN THE VIDEO.....the two connectors soldered to the PC Board ????
@ertyuiiknbvcx3 жыл бұрын
Ebay has all kinds of connectors, search for "SMA male solder" and "F connector female solder" and you should find them easy. Dont buy the other kind of SMA connector.. the RP-SMA.. i did buy some cables with that format once lol :) I dont know what RP-SMA is for but they did not fit the SDRplay :) But good there is SMA to RP-SMA converters to buy so i can get some use for the cables. I just bought the cheapest cables searching for SMA and found out that way that there was something called RP-SMA too :) To build a docking station box with antenna mount and the transformer inbuilt in the box and a screw-on SMA cable to the antenna could be a good way to get strain relief on this handheld Malachite SDR i guess and could perhaps make it more comfortable to hold a larger box too :) But perhaps not as small to put in the pocket... hmm :)
@metinmetin80093 жыл бұрын
Thenk you TA3IMD TURKEY 73
@MaxSMoke7772 жыл бұрын
If I wanted to buy a professional made antenna that already did this, what would it be called? I love the DIY, but it might be best to buy a manufactured version.
@axi6ne8us2 жыл бұрын
Is there an antenna similar to this custom one that's already pre-build for the Malahit?
@MrLunithy2 жыл бұрын
Hello would FPV RC rx aerials be useful for eg clover leaf and shotgun?
@cleverson_sa_3 ай бұрын
Hi! Nice video, I build It for my portable SDR setup, It improved the reception. Would you mind a question? Some images of 49:1 balun show a optional 100pc ceramic capacitor between ground and antenna connection of the receiver part. Is this really needed? 73s de PU5TOS.
@OM0ET3 ай бұрын
It mainly used for better performance on a higher bands, especially for TX
@seventytrees733 жыл бұрын
Why did you use a twisted pair of wires for the low impedance winding?
I discovered a gap (Out of range) at the military band. 262.6250 MHz (Dutch AOCS NM QRA primary). Is it true this receiver has gaps and frequencies that cannot be set? I have a full band receiver exactly like yours but (-Rev Espe).
@arainadiaz92193 жыл бұрын
Can transformer be mounted inside radio and add second antenna jack for it?
@OM0ET3 жыл бұрын
Actually yes, but this jack will be useful for shortwaves only.
@Djmatrane3 жыл бұрын
Original Malachite has filters on short waves, adjustable attenuator and "high Impedance" mode when you selecting Telescopic antenna by menu. Clone is clone. Not all functions are added.
@zoolkhan3 жыл бұрын
that may be so, but the russians havent taken the western market serious yet. I would always prefer russian tech over chinese tech, but the russians dont seem to care too much about non-slavic customers. So far...
@Djmatrane3 жыл бұрын
@@zoolkhan Russian Malachite is made by hands. They do not have robotic lines as china do. I have ordered one. (price near 140eur) But they are making it two month. After half a year I will have it!!!
@paulmark633 жыл бұрын
Question the socket for headphone which I have a Attachment to my computer will that work on my PSK 31 software secondly I orders a 25m long wire HF with BNC I have a attachment for the BNC will this work Look forward to hearing from you paul In Kent
@OM0ET3 жыл бұрын
Q: "socket for headphone which I have..." sorry I don't know to answer to this question. Q: "I orders a 25m long wire HF with BNC..." yes, all antennas with impedance near 50ohms will work with this receiver.
@GhostCallparanormal2 жыл бұрын
Question, would it be affected it, if you put wax on the loops you made on the ferrite ring to hold the loops in place?
@OM0ET2 жыл бұрын
No, it shouldn't be the problem. I did it with melting glue and covered heatshrink. All works fine.
@GhostCallparanormal2 жыл бұрын
@@OM0ET thanks forgot about a glue gun, saves me using a candle 😆
@OM0ET2 жыл бұрын
@@GhostCallparanormal 😄👍
@TR6Telos3 жыл бұрын
2m is useless as inteferance from the internal circuit, but its great on HF exept for powerfull stations swamping the band , half of the memory slots do not work. The freq steps are a REAL pain on the touch screen to touch correctly and selecting a station from the touch screen is bad as you end up with tiny frequency steps to correct as frequency step changes., once on a station it is pleasing.The sound is really full and detailed on FM and great on hf. I On mine the Pre amp setting is wrong ie off is ON, and on is OFF, leave it activated ie OFF on the rod antenna and dont activate it on a 20m wire or similiar. Setup I find 75db on AGC as recomended by the Russian designer "George". RF gain 20 to 25 on rod with activated preamp, 10-15 setting on 20m wire with preamp not activated (with 9:1 balun).The screen was not flush with the case a gap of about 3mil at one edge, I opened the front and found the edge of the circuit board snapped of at 2 corners,thats why it would not hold down. If you open the case it will be a pain as the other side of the visible case screws is a nut which will drop off inside! It is an incomplete radio, but it receives way better than my techsun 660 and sounds better and picks up more than my Icom pro due in part to having no mains borne inteferance which renders my HF radios useless at times thats what was apparent straight away on battery power. Some time it does not want to come out of hard setting and a restart is required. No speaker grill is not a good idea, its been thrown together, not Chinas best offering, shame.
@matthewdavies20573 жыл бұрын
Still using the TEST firmware?
@wisconsinunit60053 жыл бұрын
Hi, great video. I see that you were doing the demonstration on 40 meters. How does it perform with Medium Wave and the other shortwave bands? Would we need a different transformer for each ham band?
@OM0ET3 жыл бұрын
it mostly depends on the antenna lenght. 1m telescopic whip is not good for MW. Ferrite antenna would be a solution for MW and LW. Other SW band are good with this telescopic whip.
@best_pilot3 жыл бұрын
Even clone Malachite receivers with full Russian software are showing a button (under HARD), where you can select between Hi-Imp input and 50 Ohms input. How does this comply with your external device ?
@OM0ET3 жыл бұрын
clones don't have an additional boards, this feature do not work
@rickeaston32283 жыл бұрын
I can't figure out where the idea of twisting the wires will increase coupling. Coupling occurs because the flux in the toroid is common to both coils which provides the coupling.
would this work for matching a ATU with a short whip on a 20 watt qrp transceiver for transmit?
@OM0ET3 жыл бұрын
If you want TX you need half wave wire with this 49:1 UnUn.
@SoDogtravels3 жыл бұрын
Can you add a link for the adapter to add the balun?
@miklostomka76173 жыл бұрын
Hello all, I have built this, using the Toroid from Mauser (as per one of the comments below), the recommended wire etc. - and it does not work at all. The signal is the same (or maybe a bit weaker) vs. when I just use the telescopic antenna on my Malachite radio. I must have messed something up - but what is it? I followed the video to the letter - and I have built two of these transformers: both do not seem to work. Thank you for any ideas! (My test was on AM radio broadcast)
@georgegonzalez24762 жыл бұрын
You might have the wrong type of toroid material. Some are optimized for under 1MHz and do not work at all well on shortwave. Also kinda obvious but you need to use INSULATED wire. The video shows a copper wire with clear insulation which might lead you to think that plain old dorbell wire, stripped, will work. It won't!
@andrzejpl98972 жыл бұрын
👍
@eugenio80g93 жыл бұрын
Hi nice job do you think this could work also wirh handy receiver i.e. icom ic r 10 ?73
@OM0ET3 жыл бұрын
depends on RF input impedance of your Icom. Is possible that your RX has matching already inside.
@elcabra71223 жыл бұрын
I think that the HIGH -Z function in the menu is there to take care of this problem.
@OM0ET3 жыл бұрын
Yes, but this feature work only with aditional board for original Malachites. There is no space for such a board in this chinese clones.
@matthewdavies20573 жыл бұрын
Don't the clones have a thicker case?
@juanjocastillo3 жыл бұрын
Hi Mr. OM0ET have you tried the USB CAT control on the Malachite?
@OM0ET3 жыл бұрын
No i never tryed that
@juanjocastillo3 жыл бұрын
@@OM0ET it's supose to work as a COM Port (CAT control) and a sound card. Great vídeo Mr. OM0ET!!!! 73
@ernie548 Жыл бұрын
Can these tiny SDR receivers actually get good dx stations like Short- wave?