Simplifying my Sampling Workflow on MPC LIVE 2

[@malobeats]

❗🎬MPC Course: bit.ly/4ajfmag ❗PATREON Member: bit.ly/3YrCl0q ❗1-on-1 Coaching Call Booking: maloacademy.com/application ❗Zzounds: www.zzounds.com/a--3979349/ ❗MPC KEYS 37: www.zzounds.com/a--3979349/item--❗AKAMPCKEY37 ❗MPC LIVE 2: bit.ly/49HXVAn ❗MPC ONE: bit.ly/3r5RyWI ❗SPEAKERS ADAM D3V: www.zzounds.com/a--3979349/item--ADPD3V ❗TurnTable LP60: www.zzounds.com/a--3979349/item--AUTATLP60X?siid=253511 ❗SP-404MKII: www.zzounds.com/a--3979349/item--ROLSP404MK2?siid=308527 ❗1/4 Cables: bit.ly/3Znc41w

[@remyvegamedia]

The lesson I've been shown a lot recently is to be patient and take my time to make music with intention instead of rushing the process just to have something recorded and laid out. It's eye opening to see the process unfold because social media can make it seem like it happens automatically. Always appreciate the insight, man.

[@OZORIAMEDIA]

Those old boleros never fail!🔥🔥🔥🔥🔥

[@FiveDotLoft]

The joy and confidence you get from really knowing your tools - very inspiring Malo - very nice...

[@babysunn2]

Just so you know, when Debate Ratcheted up about The Converter Controversy… it was i who Suggested to EA Ski That You (MALO BEATS) Has Proved That The Sound You Can Get from The Newer MPC’s Are Epic… They Might Not Be “READY MADE PERFECT” But With Minor Tweaks, especially With Drum Programs Using Filters and of Course Air Flavor Pro and or Any of those Cab Filters, it’s Possible to Equal or Better The Sound when Comparing to Upgraded Converters or The SP1200… AGAIN, YOU CONSTANTLY PROVE THIS. 💯❗️

[@malobeats]

@@babysunn2 I am truly humbled by this message and cannot thank you enough for pointing this out. Thank you so much for taking the time. At the end of the day, what matters the most is how we pick and choose our samples putting them together as one whole song, which will either make or break the sound of what we’re producing. I was just hanging out with Rob Viktum last night, which is an amazing producer and he has been using his iPad to make beats and if you hear some of his work, he truly has some of the best sounding stuff out there. That really just comes to show that Sounds selection is so important. I really appreciate you taking the time brother truly means a lot.

[@StickeeZone]

@@malobeatsFacts brotha ✊🏼

[@officialmagnumopusmusic]

Not to reopen converter discussion but it is this simple. And EA Ski has said this yes if you know what your doing you can make a new piece of gear sound good but not with out all the bells and whistles you have to add a MPC 3000 or SP 1200 out the box sounds better than any new gear if you know what your doing no plugjns the sound of the outputs naturally Malo most def killed this beat though

[@veracityhiphop]

@@officialmagnumopusmusic you can bypass any of the new mpc converters by saving your work in standalone and uploading into the mpc software on pc and use a high end audio interface for conversion. Or you can hook a class compliant interface with high end converters directly to the new mpcs. New mpcs were directly designed for how modular modern workflows are. I love analog, and to me the beauty is we have a choice of using anything we want for conversion

[@officialmagnumopusmusic]

@ true I have a MPC x a key 37 but the sound quality out of theses don’t compare to my 4000. The key thing is making what sounds good to you but the one thing I challenge anyone is you can make a beat or song in the box that sounds like a newer MPC you can’t get the sound that a 4000 or sp1200 out of your laptop or MPC x or MPC live Ii

[@squalley]

My nomination for “video of the year”! 🥃 Amazing tutorial/cook-up 🖖🏾

[@malobeats]

@@squalley thank you brother. Your feedback truly means a lot. Nothing but loving and blessings to you.

[@BulgBeats]

Dopeness 🔥

[@davidneau8830]

So much cool energy in your beat, your sample and in your attitude. nbice to see your workflow from sample and drums. Thanks for your vid ! Stay as you are and Take Care.

[@Minnet.mp3]

Dayum, sick beat! And you’re very good in putting what you do into words. Respect.

[@enyceofnyc]

This video is great. You put into words alot of things that we all run into and should adapt to / work with. Thanks.

[@malobeats]

@@enyceofnyc thank you so much for taking the time to share this.

[@SMEL]

Another one MaLo sheezzzh 🔥🔥🔥🔥

[@dakotatyler2]

One of the best teachers ive seen of anything 💯

[@reembeats951]

Whenever i watch your video's i power up my mpc live 👍

[@briangbv1]

You sir are a legend beyond words!!! 🔥 I am going to be booking in some 1-1 sessions soon. It is the step to get me over this creative lapse I am struggling with. I have all the tools...and the ability to play every instrument in my studio...but just over complicating everything. Your approach is exactly what I need to conquer my demons and begin making music again...being creative...and enjoying the process instead of it being a hurdle. Simplify. I know I need to do that...but your videos and reminders of that are absolutely huge. Keep it up man. You are epic...not to mention how much I love the style and boom bap on every song you create!!! 👊🙌

[@eddyb5592]

Damn! From the start! 🔥🔥🔥🔥

[@malobeats]

This truly means a lot. Thank you so much

[@Roland_Tr909_Swing]

Hes nailed the 3.0 workflow im still learning it.

[@MisterLawaBeats]

Best workflow ever Malo!!!

[@malobeats]

@@MisterLawaBeats thank you so much brother truly means a lot coming from you

[@samuelmccann3008]

Bro soon as it comes on and you got the heater on🤯

[@alex-ur3vp]

fire as always. Hope you and the fam bam are well

[@malobeats]

@@alex-ur3vp this truly means a lot thank you so much. We are doing well, actually visiting family as we speak. Much love to you and your family.

[@l00t3R]

Hope you're having an awesome Christmas buddy. Your content just keeps blowing my mind. Love your tutorials my friend. Keep doing what you do ❤

[@pistolpete-xo7hm]

My boi back in his bag let's get it

[@malobeats]

@@pistolpete-xo7hm 💯🫡

[@darthknowl9222]

You gave me new music to sample. Thanks for your videos. I can dig it

[@TouchToneDSG]

Man, this beat was incredible

[@malobeats]

@@TouchToneDSG Man, thank you so so much really means a lot

[@carbonvibes]

Great video @MALO BEATS Those sample chops 🔥🔥🔥 🫡

[@bigpound73]

Oooooooo, that go hard my boy!!!

[@Roland_Tr909_Swing]

Colouring the favourite pads sounds like a plan .

[@freesocietybeats]

Dope video and the course is 🔥 it's been such a huge help for me.

[@malobeats]

@@freesocietybeats it truly means a lot!! 🙏 I’m so glad you’re part of the community and I have some great announcements for the course members dropping in the next few days. I really appreciate you taking the time to show the love.

[@MrSoundclashboy]

Ya Mon straight from da Bahamas am ✔️in it twice. Not sure if dis is da rite place to axe you. I lean heavy twords the Old Studio one sounds out of Jamaica and I use my midi keys for XY and Z on My Live 2. Just getting going with sampling. Does you course for 129 bone include midi arrangement detail as well as sampling arrangement detail ??? Or is it just straight samplin ? Am still a little green wif da MPC so am tinking out load here. Love da beats and da vids tanks heeps.

[@baristacebreros]

I have a question: to lower semitones on the MPC, do you do it on the entire sample, or do you do it after chopping the sample and assigning it to each pad? Thanks!

[@nervreck]

Crazy!!!! 🔥🔥🔥

[@12bitsoulsurfer]

Instant Stank Face 🔥🔥🔥

[@squalley]

Right!

[@malobeats]

@@12bitsoulsurfer 🔥🔥🙏🙏🙏

[@Prodby_808Maui]

Instant banger

[@EdwardvanBerkum]

Great beat! Great sample find! Do your drum kits include drumrolls? With MPC 3 can you duplicate a single or multiple bars, since it's more a single sequence workflow? So let's say you have like this beat intro of two bars then a nice four bar loop which you could loop for total of 12 bars ( 3 loops of the 4 bars) can you still copy your 4 bars after the intro? I have not updated to MPC 3 yet. If that works I should do that.

[@okturnt1576]

Yo Malo does any of your sample packs or drums come with your master class so we can follow along?

[@malobeats]

@@okturnt1576 great question and yes, you will have access to my sample pack and we do use some of those drums as we go along through the master class together. Thank you for taking the time to ask this question brother.

[@squalley]

2:23 I’m currently doing my best Snoop Dogg sway to this 🔥

[@bernardcasimir4966]

Good job another good video can you do one on timestretch and warp for dummies I seen the other one you did touching that topic and I'm still a little behind

[@jaypkock]

looking at how you jump between banks while making a sequence makes me wanna upgrade to a live 2 from my one retro edition

[@squalley]

2:00 AYE YO!

[@Iredidv]

12:45 muscle memory is everything, with my m+ I can do it blind (got it since 1.0) my mpc, got it for a year but hated 2.0 now I’m starting to love the mpc more, development from native instruments is stalled, but mpc keeps on evolving faster.

[@plugdn1917]

Need info on where to get 45s

[@IDONTPLAYENT]

Hey Malo does 3.0 still have the sample key detection??

[@malobeats]

@@IDONTPLAYENT hey brotha, yes it’s still there

[@DadAmongMen]

Fantastic video

[@shawndiggz8904]

The beat is fire!!!!! Can you make a video on attack & release for each chop? How much attack & release you add in Track Edit screen? I enjoy watching your videos. Great content!!!!

[@malobeats]

@@shawndiggz8904 hey brother, thank you so much for taking the time to share this request. Definitely something I could work on. Thank you so much for being here

[@chosenonebeats]

You don’t need to use attack & release if you’re chopping on beat, you would want to use it to solve a click or pop problem or if you’re creatively wanting to fade out your chops, just experiment

[@shawndiggz8904]

@@malobeatsThanks brother. I just like the butterfly effect I used for the MPC 4K and 2K. I like this technique as it would be useful if applied correctly.

[@Henry-to6yz]

You often chop samples into lots of small pieces just like i do, but the problem is, you have to switch between all the banks manually on the MPC to hear all that hard work after chopping. I use a Novation launchpad mini, it's great for not having to switch banks....so you get 4 banks (64 pads/ samples) all at one hand (A-D).... Within one button press can you go from A-D to E-H. I think you'd like it bro.

[@nicholoshoang2602]

where is the link to the drum pack?? 😭🔥 I can’t find it in the description

[@malobeats]

Thank you for this. bit.ly/3rscU0i

[@yochillsmith]

Question, out of curiosity, have you shopped these beats to artists? Griselda would love these beats.

[@cortezdevinci]

The sample is so 🔥 🔥🔥🔥please drop a beat tape on Spotify malo 💪🏾 we need it 😢

[@squalley]

0:10 just off rip huh? 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@malobeats]

Had to. Thank you brother really appreciate you 🙏

[@Iredidv]

This way of working, for making full songs is much better than 2.0, especially for having the loop selector as choosing the part, and for having an oversight instead of counting bars and beats. The moment with beta 1 i discovered it I said FINALLY. I hope in the desktop version we will be able to move the audio and midi like with a regular daw. The color scheme and the instruments and fx look really good, 2.0 gui was as boring as a hooker on her periods.

[@YoDavidGlitch]

Papa Malo, is the course updated for the MPC 3.0 firmware? Bangers as always btw!

[@GodsPoetryProductions]

Keyword from your video take your time and focus on piece by piece. 💯

[@malobeats]

@@GodsPoetryProductions absolutely 100%. I myself am not a performer so being able to chop this process down peace by peas really allows me to perfect every step of the way.

[@noemadbeatz2773]

That swingggg is neck breaking brother.

[@ogronnieb4245]

Need a course from learning my MPC37

[@squalley]

14:20 THERE’S GONNA BE A PART 2? *birdman hands*

[@malobeats]

Yes, sir, I want to finalize this beat adding some base with some mixing and exporting

[@farhad888166]

Have you noticed any recurring bugs within 3.0 beta? I have tried it and the software has been laggy for me unfortunately. Who knows It’s probably just my mpc.

[@certifiedbeatz]

I just pulled out both my MPC 2000 and 3000 for sample therapy.. sitting on this for next month😅

[@peterbennett4733]

Oh shit 😮

[@wadewilliams1892]

nice

[@nusense808]

Need Daniel Son on that

[@Smugglizzle10]

🔥🔥🔥

[@MartinMartin-xm8xs]

Question: Are you able to do this technique on the MPCone+ ?

[@malobeats]

@@MartinMartin-xm8xs absolutely. Everything you see me do on this machine is 100% applicable to the MPC 1. It’s just a different hardware layout, but the software is exactly the same.

[@squalley]

Malo, I apologize in advance. More timestamps incoming. Bro, “Chop of the year”

[@coziay7201]

Hard!!....pause

[@malobeats]

@@coziay7201 🙏🙏🙏

[@ThobbyJones]

MPC3.0 on my MPC live has so many bugs which is frustrating and kills creativity.

[@orbituary]

Someone call Action Bronson

[@wmextra]

You’re bridging The Latin/Cuban aspect into HipHop in 2024. Shout out to Mellow man Ace and Sen Dog from Cypress Hill

[@malobeats]

@@wmextra this truly means a lot thank you so much, brother

[@Roland_Tr909_Swing]

Must have took you 30 minutes to chop that track Malo .

[@malobeats]

@@Roland_Tr909_Swing it took me a while since the whole entire record was full of gems so taking my time and trying to piece everything apart to fill up all the banks did take me a while.

[@Roland_Tr909_Swing]

​@@malobeats great record find bro

[@Roland_Tr909_Swing]

​@@malobeatsin too lazy to colour my pads. Damn 😂

[@malobeats]

@@Roland_Tr909_Swing dude it’s so funny. You mention this, I rarely color my pads only when I have multiple banks filled up and I need to Bank through in between bars. Will I go out of my way to color coat some of these pads. Lol

[@Roland_Tr909_Swing]

@@malobeats we should invest more time in it at least if the chops don't work out you could always save them to disk and come back to them with your favourite chops coloured and ready to roll

[@djseek]

mera chimba

[@RattleCanCollective]

This is nassssty.

[@malobeats]

@@RattleCanCollective yo!! Thank you so much. Really means a lot

[@jammalkanani828]

Yo bruh I dunno if u wanna hear this: appreciate the videos big time, but bruh your beats stupid fye u should get in touch with artists n shit

[@babysunn2]

@@jammalkanani828 AKAI NEEDS TO PUT HIM ON A PERMANENT PAYROLL… Then Everything Else Happens. FACTS ❗️