Mammoth-3D AWD first test run.

[@ZenoModiff]

nothing to say just loved it

[@mammoth-3D]

Thank you very much :-)

[@cursed_cats5710]

shaking like an old washing machine with a few screws loose

[@mammoth-3D]

Whahahaha yes that is so true! You should see the table it’s standing on. Things start falling off from all the shaking :-) I should make a video of that one day.

[@daliasprints9798]

Doesn't help that it's doing the Voron thing of leaving out 1/4 of the top frame that would have provided a lot more rigidity...

[@mammoth-3D]

@@daliasprints9798 Maybe im just misunderstanding about the frame. But this is a 300x300 Voron 2.4

[@daliasprints9798]

@@mammoth-3D I mean how Vorons don't have a full cube frame but leave out an edge at the top front. It detracts a lot from rigidity and AFAICT it's just a "form over function" thing.

[@ZeeLobby]

​​@@daliasprints9798er. Not sure why this one doesn't. But mine definitely does. Heh. Pretty sure it's just out of frame

[@Septerrianin]

Judging by the sound, this printer is contraindicated for low movement speeds 😄

[@mammoth-3D]

whahahaha ill see if I can push it a bit more with the new AWD gantry ;-)

[@Krautech]

Impressive 😁

[@mammoth-3D]

Thank you :-)

[@MrJofArnold]

I'm wondering... could I use those printer stepper mounts on my Vz? (Also; love this project)

[@mammoth-3D]

Thank you very much! I never looked into it. Vz has a fixed gantry and im using a floating gantry. What part do you like. Maybe I can make something new?!

[@MrJofArnold]

@@mammoth-3D I didn't even register it as floaing gantry - I just thought "that's a really low z height" 😆 In general I'm interested in better ways for tensioning and double shear that fit my Vz330. I know they're working on a double shear design but dunno when that will be released.

[@mammoth-3D]

@@MrJofArnold Yes I just love floating gantry 🙂 Do you have a link to the double shear that fit my Vz330? If never hear about it. Sorry

[@MrJofArnold]

@@mammoth-3D They've mentioned it a couple of times in the discord that they are working on it, but no more info than that I'm afraid

[@mammoth-3D]

@@MrJofArnold It could also just mean that they will put two pulleys on one shaft?! Hard to tell. I do the same. Just to safe space. We will see what will come out at the end. Yes the belt tensioning system I made was, I don't need to loosen motor mounts and I don't tension directly on the motor shaft! And that is how the mammoth gantry was made. :-)

[@younghillionaire]

Awesome 😮. Where can I find the stl

[@mammoth-3D]

Thanks. Im still working on the docs. So it will go online soon.

[@freeentertainment_yt]

Is that water cooling for the steppers and hot end?

[@mammoth-3D]

Yes I use water cooling for the steppers, hotted and 5160 Pro drivers

[@alexpd3398]

Hi, could you share info about the extruder, hotend and liquid cooling setups? Thanks!

[@Mr.Moonspill]

what motors do you use?

[@mammoth-3D]

The motors in the video are LDO Super Power. Water cooled and running at 48V and 2.1 Amps

[@fintechrepairshop]

Check out the Celeritas

[@mammoth-3D]

Have a look at the other videos after this one. So even faster speed printes 👍🏻

[@timokallenbach9219]

WHAT THE FUCK!? DUDE! I'm sitting here, trying to figure out how to print a first layer and you do this kind of shit Oo What do you use for bed adhesion!?

[@mammoth-3D]

whahahaha Yes I did in this print. But it's not for the first layer. It is that the ASA doesn't bond with the PEI Sheet. What I learned over the years. Get a good PEI sheet and stick with on brand, so you know what it can do and what not. The right tool for the job. I tested klicky, BD-sensor, ..... but the best and always consistent is the Beacon probe, not the CN version.

[@mammoth-3D]

Sorry never gave you feedback about the adhesive I use. Any water based glue stick will do the job. In the US you can find lots. But in Europe hard to find, so im using bamboo lab glue stick.