Don't miss Christian Green's channel! 🌊 He’s not only sharing amazing surf and camper life content, but he’s also built an incredible DIY surfjet! 🔧🚀 Check it out for adventure and creativity at its best! kzbin.info/door/MnFa-iFclx98aIb0mKQKkg
@benjimanburrell83743 ай бұрын
5 videos and his last one was 2 years ago.
@trend.tech20403 ай бұрын
All the parts were official. Looks amazing.
@clintosborne79742 ай бұрын
Was thinking the same thing. Not really a backyard shed…
@jasonandersen59752 ай бұрын
Screw you and the click bait thumbnail.
@jasonandersen59752 ай бұрын
Why the misleading clickbait thumbnails? I won’t ever view your videos again.
@liamstone34373 ай бұрын
I love that the title calls this a diy project while it is built in the most well equipped professional shop imaginable and he obviously has all the spare hands he needs to assemble the CNC cut components.
@Shade-Slayer2 ай бұрын
Considering how the actual commercial ones are made this is DIY bud
@paul56832 ай бұрын
Didn't you see how he just pulled the pieces out of the pile of lumber laying on the floor? You can't get more DIY than that. 😅😅😅
@Shade-Slayer2 ай бұрын
@@paul5683 unfortunate for you that your version of diy doesn't contain sawed wood planks , bud there's a difference between diy and totally built from scratch 🦝
@crawford3232 ай бұрын
Yes try this in the every day person's garage shop and see how far you get.
@AEK1106103 ай бұрын
Thumbnail photo shows a very different caravan, with a flat roof, rounded sites and series of small round windows. Unique design, unlike the trailer that is actually shown in the video, which is a standard design.
@Oceans11.113 ай бұрын
I’m not sure I’d call it DIY even though he did it himself.. more like handcrafted by a man who knows exactly what he’s doing by building & designing an actual camper. All the parts were official. 👍👍 Looks amazing.
@ibast13 ай бұрын
I think that's even generous. It was in a factory, with specialised tooling and jigs and with the help of other people. Cool trailer and video, just the DIY claim needs to be dropped.
all the cabinets in closet and table. Great job . Looks amazing
@graystone30483 ай бұрын
So where is the thing from the thumbnail?
@dandapro2 ай бұрын
scammed!
@skyboy1956Ай бұрын
didn't pan out
@zaneadams55013 ай бұрын
It looks great. Plenty of room, and well thought out design. My guess is that the piano hinge may prove to be a mistake after a few rainy adventures, and he'll switch to a hurricane hinge.
@scoott57803 ай бұрын
Really annoying, that the thumbnail is unrelated. Consider me unsubscribed.
@geekgee2 ай бұрын
I fell for it as well. 🤬
@markmnelson2 ай бұрын
Yep. Came for the compound plywood curves. Would still love to see whatever that was--reminiscent of beautiful De Havilland Mosquito woodwork. Left with a thumbs down for the waste of time, which is sad given the build was fine for what it was.
@lylejohnston41252 ай бұрын
@@markmnelson It's a big slipper!
@jasonandersen59752 ай бұрын
Saw your comment and bailed at ten seconds. This is the second and last time they’ve played me.
@cyberthug622 ай бұрын
This is so lame.
@memlafeder3 ай бұрын
Actually, this channel shared lots of DIY CAMPER videos. So this is another one, but with 1 VERY BIG DIFFERENCE. I loved this guy's precise craftmanship and awareness of all details. Yeah, that is something need to be shared and promoted. (even if he pays to Quantum for it, I don't care) Cause at least, this time I really wanted to see everything he did, without passing or skipping the video. Great job, I hope Quantum continues to be more specific about the videos they chose to share. (like this one)
@MegaDivertisment3 ай бұрын
felicitari prietene !...a iesit un lucru frumos si util !
@michaelschwan-kh5nq3 ай бұрын
respect !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@FeralRabbit3 ай бұрын
Where is the thumbnail from? This is just another teardrop.
@2104195904573 ай бұрын
Superbe réalisation, très bon travail. Bravo. 👍👍👍👍
@storythenandnowus3 ай бұрын
From design to finish, this project is a masterpiece! Christian and his friends really make it look easy, but you can see the effort that went into every step. DIY builds like this inspire me! Every time I see videos like this it makes me want to get out of my garage and do it. LoL 🤣🤣
@trend.tech20403 ай бұрын
I will always praise the Lord
@bellytripper-nh8ox3 ай бұрын
@@trend.tech2040 BE **LIE** VE
@diffened3 ай бұрын
I don't really think of this as DYI, even if it is labeled that way.
@flybywire58663 ай бұрын
That's no DIV project, not with that workshop and amount of professional tools. It's an outstanding product, but it's not DIY.
@flybywire58663 ай бұрын
@@trend.tech2040 The lord is all-knowing, so no need to tell him everything he already knows again and again.
@jasoncostanzo53372 ай бұрын
Beautiful trailer...but it would have been nice if the trailer matched the thumbnail of the video.
@vlogyoutubeolja3 ай бұрын
Великолепная работа😊❤
@RalfPfister3 ай бұрын
Toll gemacht , hier hat jemand alles gegeben.!!!
@ramirosuarez95372 ай бұрын
Nice concept. I liked it very much. Congratulations!
@robbybobby80113 ай бұрын
Beauty bro! Thank you really cool ❤🎉
@SPsiuping3 ай бұрын
👍👍👍Excellent craftsmanship 👏👏👏
@davidjavids24313 ай бұрын
NICE SET UP. AWESOME JOB, THANKS FOR SHARING YOUR ABILITIES
@YeahNahMaybe9472 ай бұрын
The rubber gloves are a cute touch.
@РоманБурман-й1ш2 ай бұрын
🔥🔥🔥🔥
@kevincorbin62733 ай бұрын
Beautiful craftsmanship
@ClaudioKombi3 ай бұрын
Muito bom. Show parabéns 😅😅😅😅😅
@EVA-P.3 ай бұрын
enjoy it😊😊
@alexandraegorova16293 ай бұрын
Нет предела мужскому творчеству, восхищаюсь.
@maari71013 ай бұрын
❤❤ from 🇮🇳🇮🇳
@EvanIsmail41153 ай бұрын
From kurdistan 😊 🤗 ❤
@alirax40583 ай бұрын
Thank you
@BestAnimecap13 ай бұрын
Good ❤
@trend.tech20403 ай бұрын
one of the nicest I've seen yet.
@UmbyWatch3 ай бұрын
You are an Artist!👏👏👏👏👏
@dipladonic2 ай бұрын
Tail heavy. Its polar momentum will be interesting. I'm thinking rear-biased pendulum!
@bernardleonsiegfried33043 ай бұрын
Un super travail, mais pour justement cet incroyable besogne, vraiment trop petit...😮😮😮😢😢😢😊😊😊❤❤❤🎉🎉🎉
@NZ2Pepper3 ай бұрын
Nice. I wouldn't have placed the battery behind the axle though!
@trend.tech20403 ай бұрын
Excellent craftsmanship
@NKBobcat3 ай бұрын
Engineering masterpiece.
@tamiweber94093 ай бұрын
Great craftsmanship ❤❤❤❤❤
@nikolaisprinkling3 ай бұрын
Why did you show a different trailer in the thumbnail? Where’s that build video?
@Ιατροδικαστής-Νικος3 ай бұрын
Великолепная работа
@WELDEROFMASTER3 ай бұрын
Keren brother👍👍👍👍
@felipericketts3 ай бұрын
Wow, that was impressive! Is this a one of a kind or is it a production trailer? Thanks 🙂
@ivokouters34153 ай бұрын
I was wondering, how do you get a watertight seal at the large kitchen hatch?
@farhorizons39013 ай бұрын
If this was a commercial project, they would have built at least one full size prototype to check dimensions, locations of switches etc and probably made many adjustments. He's gone straight to the finished product! Amazing planning ability.
@diffened3 ай бұрын
I think as a practical matter it is at least 1/3 meter short on headroom
@delukxy2 ай бұрын
As this was nothing like the thumbnail, this may not have been the first one built of this type. May have been several before this one. Bad choice of tailgate hinge though.
@toddstreet17343 ай бұрын
Great job.
@trend.tech20403 ай бұрын
how do you get a watertight seal at the large kitchen hatch?
@АнатолийГоптарев-р1в3 ай бұрын
Что же здесь удивительного? Практически заводские условия с массой станочного, сварочного оборудования. Материалы супер. Всё детали просчитали на компьютере, заранее изготовлены, только собирай и нашпиговуй типовым оборудованием: климат, освещение, холодильник, и прочее. На коленке, из говна и палок такой вагон не построить. И то наши мужики, в тесных гаражах выдают сногсшибательные проекты.
@mumihan2 ай бұрын
согласен полностью, ничего удивительного, стандартный шаблонный прицеп как в инкубаторе. На таком то оборудовании можно было и покруче чониить сварганить. А на картинке к клипу совсем другая модель - вот она то и заслуживает внимание. Разводилово махровое. Дизлайк во весь экран!
@kilaamos60703 ай бұрын
amazing! I wonder how much it weighs?
@earlwarren22653 ай бұрын
Excellent build, one of the nicest I've seen yet.
@Mg-ou7hg3 ай бұрын
Well done great video great caravan
@toshishimura3 ай бұрын
Just needs Ronnie Corbet or Warwick Davis to buy it now
@stevenreid-g2y3 ай бұрын
This is how a skilled cabinet maker builds an rv.
@martinsaunders79252 ай бұрын
Or boat builder or experimental plane builder. The level of craftsmanship is high. Would probably use Coosa board instead of Styrofoam. Polyurethane foam won't absorb moisture and remains insulating longer.
@igrovit2 ай бұрын
В таком прицепе среди ночи к холодильнику не сбегаешь 😁
@EvanIsmail41153 ай бұрын
👍👍👍👍👍👍👍👍👍
@szaki2 ай бұрын
Towing anything, means extra gas, need a car/truck with larger engine! Knew a guy had a camper trailer, he said his transmission goes out more often from the towing.
@NazNazan-u9z2 ай бұрын
💕💕💕💕💕💕💕💕👌👌👌👌👌👌
@CurboroughSprinter3 ай бұрын
Another video where your thumbnail is a different one! Not the same camper! 🤦🏻♂️
@richstewart12 ай бұрын
Really beautiful job. Can you make any money from it? Seems like it would need to be mass produced to make any money. Were you able to sell this one and if so, how much? How much does it weigh?
@philipponte56433 ай бұрын
I’d rather buy this one than a factory made one. This one better
@YassineQaba3 ай бұрын
💯👍👍👍👍👍👍👍👍👍👏
@RossD82 ай бұрын
I'm a little confused with both hands very close to the device that's bending sheet metal.
@rayherriott65173 ай бұрын
Where is the one shown in the thumbnail?
@Hsl83 ай бұрын
👍👍👍👍
@takis123453 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍
@Royal_T3 ай бұрын
I like this build, but i fail to see the connection to this trailer and the one in the pic, is this what is know as "clickbait"?
@BryanConnelly2 ай бұрын
Looking at the thumbnail….. Is that the left shoe or the right shoe? It totally looks like a slide 😂😂 It looks like it could be a giant pair of sandals
@hannukujamaki53333 ай бұрын
Erittäin hyvin tehty työtä ja upea vaaditaan yhteen Make 😅t Hannu käännös teksti
@trend.tech20403 ай бұрын
bet that weighs not too far off a 12 foot caravan!
@str8up5983 ай бұрын
First thing - purchase a $250,000 large format CNC cutter.......
@hopebear063 ай бұрын
What the upside to restricting your oxygen supply?
@DuaneBurden-yu6tu2 ай бұрын
Is there a way a guy could get a copy of your plans on this
@JEANDURAN13Ай бұрын
necesito una , cuanto cuesta ?
@BraxxJuventa3 ай бұрын
😁👍🏼
@dirkbraun80413 ай бұрын
Colles Projekt. Der Mann hat sich echt Mühe gegeben. Ich finde es aber immer Schade das bei Manchen Details das dann nachlässt. Die Scharniere der Schranktüren und der großen Heckklappe werten das ganze stark ab. Das sieht wieder sehr billig aus. Ansonsten Top!
@rapidrrobert43333 ай бұрын
Not a backyard build. Excellent
@actionjackson95542 ай бұрын
Looks like a 1950 ties trailer
@carpballet2 ай бұрын
For those wondering where Christian got all the beautifully crafted panels in the beginning and the trailer frame to put this on, I built it all. From scratch. It took me 28 long weeks of meticulously measuring and cutting/welding everything by hand. But Christian doesn’t want anyone else to get all the glamour and chicks so my work gets cut.
@哥郭-i3r3 ай бұрын
怎麽不參加紅點德國設計展呢
@johnf66872 ай бұрын
✅
@Hooliganos-z7n3 ай бұрын
😮
@RoyDees-t2k3 ай бұрын
Hey...you skipped the painting. I wanted to see how and where you painted your trailer.
@pa4tim3 ай бұрын
He has a lot of weight in the back and next to nothing in front. That is not good and can be dangerous for the stability when towing it behind the car. The tow-hook likes to see 70-100kg of weight pushing down. I think he could even have a negative pressure. But it is beautiful build
@grahammonk80133 ай бұрын
@pa4tim At the end, look how far back the axle is. I think that is more than enough to balance things correctly.
@pa4tim3 ай бұрын
@@grahammonk8013 The battery, fridge, whole kitchen, cupboards/closets and stuff in it, water etc is all behind the axle. The whole front before the axle is only a matras. In commercial build caravans the kitchen is in front or above the axle. Gas bottles are also often in front.
@paul56832 ай бұрын
He'll be crapping his pants when that thing starts swinging back and forth as he's going down the highway. 😅
@Noeleon502 ай бұрын
DIY my ass, it looks like one requires a full on work to do this project? BOGUS THUMBNAIL🤯
@grmgrm912 ай бұрын
could you give us the total weight ,please? under 500 kg or more. thanks
@DieterPiening2 ай бұрын
Nicht schlecht, aber Kältebrücken bei der Isolierung. Warum eine Größe, bei der normale Menschen Platzangst bekommen?
@standor7773 ай бұрын
теплоизоляции похоже вообще нет? летом будет душно, а в холода - даже не зимой - замерзнешь
@워워-d6l3 ай бұрын
I think this person has a separate channel. If anyone knows, please let me know.
@Moh.17-e2w3 ай бұрын
لا أصدق 😮
@koalafan15762 ай бұрын
You call that a caravan? My 2 man tent is bigger. It’s a great build. He did a good job. It’s just a single person itty bitty thing though.
@jorgegirardi11292 ай бұрын
Otra vez nada que ver con la carátula Quantum
@igorivanov45793 ай бұрын
Слишком сложно для собачьей будки. Конструкция должна быть проще. Зачем такой многослойный пирог корпуса?!
@ecooxigeno3 ай бұрын
Tiene un grave y peligroso problema: prácticamente todo el peso está sobre el eje ( trasero) y aún más atrás. Eso crea una peligrosísima condición de inestabilidad a la hora de ir por la carretera. Ningún camión remolque lleva su carga en la parte trasera.porque es un accidente seguro
@neopret783 ай бұрын
Это же Шаман!
@theymusthatetesla31863 ай бұрын
VERY talented guy! But, I bet that weighs not too far off a 12 foot caravan! Great work, though.
@tomedavtube2 ай бұрын
THUMBNAIL IS CLICKBAIT!
@jasonhowland71452 ай бұрын
Fantastic camper you made there but I don’t that qualifies as a “DIY” camper; not with such an extensive tool and shop you have there.
@schirmeyerb3 ай бұрын
Commedia..nobody have the material
@MEGACOLOBOK3 ай бұрын
Это серийное производство!..👎👎🤬🤬🤦♂🤦♂
@Muhammed-g6n9c3 ай бұрын
Clikcbait
@yarlami96723 ай бұрын
Мне грустно, если даже решусь такое делать, то на этот прицеп отсутствует сертификат и в регистрации тс будет сложно добиться успеха. Изготовить можно, использовать нельзя(
@zorrozorro4193 ай бұрын
Делайте в прицепе, не трогая основу. В итоге это просто перевозимый груз. В интернете есть масса достойных примеров.
@laurenarndt4642 ай бұрын
Unless you have helpers and access to industrial equipment, this is not a DIY project. Great product nonetheless.
@ItAintMeBabe992 ай бұрын
Freakin Click-Bait. Not the same trailer as in the thumbnail.
@diffened3 ай бұрын
Very nice design and workmanship. As for the comfort part of things, I think he will find that an extra foot, 1/3 meter, of headroom would be gladly welcomed after using it once or twice. Barely any room to change clothes, or much of anything else, and let's face it, if two people want to have any sort of creative sex life in that thing, it's going to be an unwanted challenge. cheers
@andresullivan64732 ай бұрын
I watch Drew builds stuff at least you can follow that and his tooling is not a all industrial