MAN TGA D2066 engine.Metering unit replace and repair.

[@zkafridi9772]

Very good joy bhai, All sunsur change for All truc......

[@aizazkhan2618]

You have joy number

[@junaronate2688]

Yes sir may natutunan ako. May hawak din ako man ngaun lang ako magumpisa paano ang pag gawa sayo maliit na bagay pero sa amin ay malaking bagay na sa amin yung mga share mo na alam..salamat. sir isa na ako sa nag aabang sayo..

[@jlcworkshop]

May naincounter nga akong trouble sir nong isang araw.edc 3775-02 kapag tumakbo ng 80kph ang truck saka lumalabas tapos nawawala ang accelerator.tapos namamatay ang makina.nasolve na ang problema kaso d ko nakunan ng video.pero try ko parin magawan ng content at maishare.yon nga lang bz kami masyado ngaun.nagkasakit pa ako.

[@FamiliaBasa]

galing nyo naman po sa ginagawa nyo. watching here po. stay safe!

[@rakeshvk5042]

Waiting for more videos in man engine related

[@josephinesalitavlog7320]

Slmat po s pgbbahagi ng dagdag kaalaman

[@cristinarpajarillo5756]

Tamsak done po kabayan watching now

[@kuyaelbacanitv529]

great job ang galing gusto kudin matoto mag mechanico para ma mechanico ko yong makina ni monica salamat sa pag share

[@jlcworkshop]

Hehehehe salamat po sir

[@fastrudy1]

thanks for your feed back, thanks for time win when we meet this fault code ;)

[@lethashvlog]

Yun o marami na naman matutunan mgabtaga panuod mo sir

[@catalinosumaylo3630]

Salamat sir kaw din ingt ka din

[@catalinosumaylo3630]

Ayus sir idol kita

[@mohamedismail9749]

Good idea ❤️❤️❤️

[@kevinmaharaj08]

Thank u

[@hariprasatharunmozhi]

Bro iam in big problem . Last 10days before i will change the all filters (diesel and oil) 4 trucks even 10 days that trucks all good last 2days all trucks came starting trouble in all trucks same problem idont know what to do.? Plz help me

[@jlcworkshop]

Hello brother.maybe there is leak in the fuel and water separator rubber gasket.

[@faisalcheema922]

Hello sir My truck man tga 19.400 its gear not shift in high mood it shows fault code zbr 00158 plz tell me whats problem

[@jlcworkshop]

Hi sir good day.according to fault code book zbr 00158.-Battery potential (voltage) Switched. Im not really sure the exact problem but Maybe the problem is the power supply from the switch going to valve block.

[@jlcworkshop]

Please check this video link for additional info.thank you kzbin.info/www/bejne/hnvShYqFaceZhq8

[@onesmusmuya576]

Thank you so much

[@catalinosumaylo3630]

Salamat sir

[@BGmtv28]

Hi bro how are you I have man TGA 41.400 vehicle. There some fault code(EDC Diagnosis 03781-01) is coming and at the same time the black smoke also coming from smoke silencer. Please Can you give me some solution for that and what I have to do for that problem

[@jlcworkshop]

Hi sir.EDC 03781-PRESSURRE RELIEF VALVE OPEN (PRESSURE TOO HIGH) check the presaure relief sensor.

[@BGmtv28]

@@jlcworkshop we changed that relief valve but no changes same problem

[@BGmtv28]

Not only that fault code there black smoke also coming

[@jlcworkshop]

@@BGmtv28hi sir, its possible that the problem is the injectors.its better to check with computer.

[@thanasismelissaris9176]

Hello boss, you are very good at your job!!!! can you please explain to me why my engine shuts off suddenly without causing me any damage, then I immediately put it back on, it's man 6022

[@jlcworkshop]

Hello sir.im not familiar in man truck Model 6022.can you tell me again the model if it is man tga tgl tgs or tgx. By the way.maybe the problem is loose contact wire connection.

[@thanasismelissaris9176]

thank you for the answer! the machine is from tga 360 hp mounted on a neoplan bus frame and because it has been tiring me for the last time I asked you to give me the knowledge and I appreciate it very much! thanks!!!

[@jlcworkshop]

@@thanasismelissaris9176 sir.check firts the edc fuse located at the top of the engine.check it for corrosion and loose contact then check all socket wire connection in EDC MODULE.also check the socket wire connector in camshaft and crankshaft position sensor.and all the sensors in fuel high pressure pump metering unit and in rail pressure sensor.

[@thanasismelissaris9176]

Thank you very much for your time. I will proceed with the actions and I will inform you. Be strong and healthy!!!

[@eltonrodriguez2016]

good morning boss tanung ko lang pag nag stock up yang solinoid yan ba sanhi ng namamatay ang makina habang tumatakbo sa kalsada?? salamat po good bless❤️

[@jlcworkshop]

Cgrado sir na kapag nag stock ang metering solinoid mamamatay ang makina kc magkakaroon ng force to idle ang makina.mawawalan ng accelerator.kc mag oover pressure sa rail.pero kapag nangyari na ganun.nagkakaroon sya ng fault code na edc 03781.anong fault code ba sir ang lumalabas kapag namamatay ang makina?

[@eltonrodriguez2016]

@@jlcworkshop salamat po sa sagot🥰 kahit papanu nagawan ko ng paraan kahit wala kaming pang scan ng mga truc..lagi lang ako na nonoud ng video mo..salamat ang laking tulong🥰❤️

[@jlcworkshop]

@@eltonrodriguez2016 saan po ang location mo ngayon sir.

[@eltonrodriguez2016]

@@jlcworkshop taif saudi po sir

[@eltonrodriguez2016]

puro Man at mercedes din po unit namin d2 dami ng sasakyan nag iisa akong mechanic😅 walang gustong mag aply😂

[@fadhelnaser8614]

Good morning Mr. J I have a question related to this video, if a small quantity of hyd oil or brake oil is mixed with the diesel will it harm the common rail components? Thank u in advance 🙂

[@jlcworkshop]

Hello sir good day.I already have experience with caterpillar engines that mix engine oil with diesel. But the fuel system was not damaged. It just emitted white smoke. In my own opinion, a little hydraulic oil in diesel will not affect the fuel system

[@batoyteve7608]

Oragon ka talaga manoy minadali..nakatipid n nman saimu ang kompanya.

[@jlcworkshop]

Tsamba lang manoy

[@rakeshvk5042]

Super explanation

[@aqifnadeem6325]

Good

[@catalinosumaylo3630]

Ah sege sir salamat dami work ako lang mag isa

[@jlcworkshop]

Ingat lagi jan sir.

[@anamylenearevalo4645]

Sir tanong ko lng kasama ba yan s hard starting?

[@anamylenearevalo4645]

Pag kinitian ko diretso andar?

[@derouichehaythem9077]

Does it contribute to fuel economy?

[@jlcworkshop]

No sir,the metering unit is to control and maintain the pressure in the rail.

[@catalinosumaylo3630]

OK na tunug sir

[@jlcworkshop]

Ay ganun ba sir,mabuti nman kung ganun.metering unit din ba ang problema

[@Ugabhg]

Hi sir! From what comes code 3778-01 ?

[@jlcworkshop]

Hello sir,EDC 03778 -01 RAIL PRESSURE LEAKAGE IN OVERRUN CONDITION--TOO HIGH.

[@jlcworkshop]

One of posible problem is also the metering unit

[@fawzanfahad7408]

Hii sir. I have 1 fault code 3748-04.im change the mesaring unit. Same problem. Pls help

[@jlcworkshop]

Hello sir,maybe the problem is in the current supply.maybe there is an open wire (cut).

[@lijoshaji6806]

Hi I have man tga gear is tight in lo gear hi gear is soomth what is the problem can u help

[@jlcworkshop]

Hello sir,is there fault code appear in dashboard?

[@lijoshaji6806]

@@jlcworkshop no code only msg (comfort gear shift defect) this is the msg

[@jlcworkshop]

Sir have you checked the comfort shift button? MaYbe there is a lost contact

[@jegerbaya7278]

Sir saan nakakabit ang intering unit

[@jlcworkshop]

Sa gilid ng high pressure fuel pump sir

[@jlcworkshop]

kzbin.info/www/bejne/mZ6sdGd5Yp5kbck paclick lang sir ng link

[@jegerbaya7278]

@@jlcworkshop slmt po

[@Mayanneparohinog]

🥰

[@catalinosumaylo3630]

Sir magandang araw ask ko anong trouble sir ayaw mamatay headlights kahit naka off ang switch at dashboard ayw gumana mga gauge wala lahat rpm saka speedo meter umangat block out thank u sir kaw lang asahan ko man tgs

[@jlcworkshop]

Ung sa dashboard sir kung black out lahat.pakitingnan po yong wire na nakakabit sa positive side ng battery yong wire na kulay puti.may dalawang fuse din po yon sa tabi.baka busted or baka putol yong wire

[@catalinosumaylo3630]

Ito sya sir mitiring valve

[@jlcworkshop]

Yes sir yan yon

[@catalinosumaylo3630]

Saan ka pinas sir

[@jlcworkshop]

Calamba sir.pero tubong bikol ako

[@dondefallaria2396]

Tropa yan din ba dahilan bkt ayaw umandar makina

[@jlcworkshop]

Isa rin yang dahilan tropa.pero may fault alarm ba na lumalabas sa dashboard?try nyo muna tropa tanggalin ang isang linya ng highpressure pipe sa common rail.tapos icrank nyo kung may lalabas na diesel.kung wla lumalabas try mo buksan ang metering unit.

[@dondefallaria2396]

@@jlcworkshop binuksan ko meron nmn lumabas na presure

[@dondefallaria2396]

Problima nito tropa namatay makina habang tumatakbo ang truck

[@jlcworkshop]

@@dondefallaria2396 wla bang fault code sa dashboard tropa?

[@jlcworkshop]

@@dondefallaria2396 nangyari dati sa isang unit namin yan namatay habang nananakbo.nagpalit kmi ng ecu at ffr.pati na rin loom wire ang nangyari kc doon sa unit namin pinasok ng langis ang ecu.sa loom wire dumaan yong langis nasira ang ecu.check mo tropa ang loom wire yang itim na cable harness na papunta sa injector baka marami na yang langis

[@virgiliojardinero5537]

Beter late than never

[@irfansartas2052]

😂

[@sangaredrissa8448]

Bonjour mon boss j'ai problème de ça 03754-00

[@jlcworkshop]

Hello sir.may i know what man truck model?it is tga or tgx?engine will start or not?what is the exact fault code sir?edc 03754 or spn 03754?

[@jlcworkshop]

What about the injector loom wire?maybe there is an oil in edc/ecu from injector loom wire/cable harness.if the oil penetriate inside the ecu.the ecu will be damaged.

[@mariomacas3323]

Malalaking makina yan