Manfrotto Fluid Video Heads

[@TheStaniG]

Quick, concise and lists every spec or feature I needed to know all in under 5 minutes. Solid video.

[@BandH]

Thanks for the suggestion - this is definitely on our short list of products to review in the near future.

[@BandH]

+Chervin Chua KelbyOne uses a Vue-More turntable for most of the spinning product shots, including this one. Thanks for your question!

[@bennetthall7955]

What would recommend for the Fuji GFX100 - the 504 weight rating is line - planning to acquire monopod for tight spot shooting and lower form factor situations - currently using carbon fiber benro and Linhof plate with quick releases which is nice but not for video of course.

[@jjayzz05]

Question, I heard that this specific fluid head can pan left to right on the head if installed on Manfrotto monopods such as the 561BHDV or any of its kind. Is there any truth to that? Perhaps on a separate short video explaining it? Thanks

[@fancyplace]

Sorry I'm new to fluid heads. So, can I purchase this and install on any tripod or does it have to be a specific Manfrotto tripod? Thank you.

[@tomhughes5123]

i fancy trying one , 500 arca swiss qr adaptor and chop that lever down to 4 inch , im sure i dont need a tyre lever to smoothly move an slr around

[@RaphaelYC]

Hi, If I buy a fluid head with a flat base, is it possible to add the 60mm half ball in the future? or is it fixed? thank you

[@BandH]

You can add a 75mm or 100mm ball. There is no 60mm ball sold separately though. Dana G. [e-mail]

[@BandH]

The Manfrotto MVH500AH tripod head has a standard 3/8-16" mount so it will be compatible to mount on any tripod with that matching mount. Dana G. askbh{at}bandh{dot}com

[@rickraub5448]

Hi. I bought a used 502AH and the red pan fluid drag control ring doesn't move. Its stuck. I can't adjust the paning drag . Any ideas? Hopefully simple? Thanks

[@BandH]

Reach out to one of our experts for some help! You can call 800-606-6969 or email [e-mail]

[@GaryEasonFlightArtworks]

If only shooting with a DSLR what about the Manfrotto MHXPRO-2W Fluid Video Head ? It then uses the same quick release plate as my other accessories. Genuinely quick too, no fiddly side screw to tighten - which seems to me a disaster waiting to happen (if you forget).

[@BandH]

The MHXPRO-2W would be another option, yes. If you have other tripods/monopods using the RC2 quick release system, and don't have any overly long or heavy lenses, you could look into the XPRO. *Christina* [e-mail] bhpho.to/K76dWZ

[@azhao6060]

A fully loaded rig like 1:09 weights very close to 11lb. Do you really recommend it?

[@BandH]

The Manfrotto 500 will support up to 11lbs. Generally I like to have extra stability so for a fully rigged camera I would lean more towards the Manfrotto 502 or 504 heads personally. Dana G. [e-mail]

[@CRBpictures]

Really like the new intro (from 0:11)

[@JJbiggs357]

Very helpful video, but Mia mentioned the MVH500AH head with 60mm Half Ball paired with a 755XB Tripod. For the life of me I cannot find this combination on B&H ...?? (Only Flat Base)

[@BandH]

I think this is what you are looking for: $443 for the combo www.bhphotovideo.com/c/product/944781-REG/manfrotto_mvh500ah_755xbk_mvh500ah_fluid_head.html Please let us know if there is anything else we can assist you with. Thank you for choosing B&H. Simon M B&H Photo Video and Pro Audio

[@JJbiggs357]

Thank you! :)

[@ginamiller2241]

I am having trouble figuring out how to use my Canon C100 with the Manfrotto MVH500A Fluid Drag Video Head with MVT502AM Tripod. The plate comes with one giant screw but that only holds the plate to the front of the camera, When I put it on the tripod the back of my camera is lose and can slide around. How do I solve this problem?

[@BandH]

The Canon TB-1 Tripod Adapter Base is compatible with the Canon C100 and C300, and the XF305, XF300, XF205, XF200, XF105, XF100 professional camcorders. It supports both 3/8"-16 and 1/4"-20 tripod screws. It is designed to accommodate 3/8" and 1/4" tripod screws. bhpho.to/2mhQOep >Mark

[@Karch.Dah-Veed]

How to determine if I should get the Flat Base or the 60mm half ball on the MVH500?

[@BandH]

Check out our article: How to Buy a Video Tripod: bhpho.to/2k2PpqR 100mm half balls are going to provide more stability, and 150mm-diameter half balls or flat bases are good for camera systems that weigh 80 pounds or more. Smaller sizes, such as a 60mm half balls, are appropriate for smaller, lighter cameras. The big advantage of ball bases, also referred to as half ball or claw ball, is that they allow quicker and easier leveling of the fluid head. Without a ball base, you have to adjust the individual leg heights to level the head. Most heads have a built-in bubble level. One that is illuminated for working in dim conditions is more desirable, but any kind of bubble level is very useful for leveling. Many heads are available with either a flat base or a ball base, and while it may seem an obvious choice to get a head with a ball base for fast and easy leveling, there is a compelling reason to consider a head with a flat base, especially when using a camera system that weighs less than 20 pounds. The reason is the camera slider. Small, portable, lightweight camera sliders for medium-sized and smaller cameras have made it easy to add production values to shoots. >Mark

[@c0pyimitati0n]

I'm looking to get either the 502 or the 500. I plan on using it with a Konova K2 slider. Which do you suggest? There is a killer deal on the 055xpro3 with the 502 head.

[@BandH]

Both are great choices. The Manfrotto 500 head is a bit smaller in size so it may work best on the Kenova K2. The 502 has tension control for tilting and panning, so you can make it very slow and smooth or very loose and quick. >Chuck

[@sully3544]

C'mon. This video shows about 20lbs of rig and states a 9lb limit. In reality this head struggles to control over 3 and a half pounds with the counterbalance preset. It can hold maybe 4 1/2 lbs total comfortably with decent pan and tilt feedback but the counter balance will be overwhelmed. This is for a small dslr and lens only with maybe a hot shoe mic that's about it. I use it with a dslr and minimal rig w follow focus only and that comes to 5lbs which is just about too much. Let's get real here. The rig in the video needs to be atop a 509 not this 500.

[@fahadshah88]

can you please give a link to that focus and zoom attachment u have on the rig at 2 min 24 sec

[@BandH]

That's the Opteka FFR-900; it's not a brand that we carry but you can certainly find it several places online. Thanks for watching.

[@infokus6824]

I have the 502,it's so great! I also would like to buy the Manfrotto MVM500A monopod. Are the quick plates compatible? I also need a quick release plate for my Glidecam HD200. Which one I would need? The Manfrotto 357?

[@BandH]

The quick release plates on the 502 Manfrotto Video Head is not compatible with the MVM500A plate. You will need the 500PLONG plate for the MVM500A head, which is B&H # MA500PLONG. |Heather S|

[@infokus6824]

B and H Ok thanks, but what about the Glidecam? Can I also use the 500PLONG on the Manfrotto 357 Pro Quick Release Adapter ? It will be great if I can have the same plate on all my equipement

[@BandH]

Infokus No unfortunately, the 500PLONG plate is not compatible with the Manfrotto 357 Pro Quick Release Adapter. Only the 357pl plate is compatible with the 357 Pro Quick Release Adapter. - Yossi

[@ozstarjoy]

Great Review. Thanks for your review, which tripod or tripod legs (mid range) is the best suitable for this MVH500AH, Can I use Dolica AX620B100 tripod with MVH500AH fluid head? I m using mostly for video. Thanks

[@BandH]

Your tripod is not a very good match for this head. We advise mounting this head to a more robust /professional set of sticks. This is one of the kits we offer: Manfrotto MVH500AH Flat Base Fluid Head, 190XB Tripod Legs, Padded Case Kit - B&H # MAMVH500AHK2 .bhpho.to/1nYTbIh Please contact us via e-mail if you have additional questions: [e-mail]. Mark S.

[@ozstarjoy]

Thank you so much for this info, I think Manfrotto 055XPROB with 500AH is good on your website, but I am jst wondering Can I use this tripod for Konova k3/k5 100cm slider? would that be sturdy enough to hold the weight of camera(Canon 60D - 24-70mm 2.8 lense) and slider? any suggestion on this?

[@BandH]

You could use the 055XPROB to support the Konova k3/k5 100cm slider with the 60D and 24-70mm f/2.8 lens attached. If you are worried about stability, you could always use some sandbags or an apron with some ballast to add some stability. *Christina* [e-mail]

[@ozstarjoy]

Thank u sooooooooooooooo mch for ur help. U guys are doing great job keep it up GOD BLESS :)

[@BandH]

Joy Christian You are most welcome. we are glad that you derive benefit from our presentations.

[@_baxter]

How tight do I turn the Pan lock? Seems like Im going to mess something up

[@BandH]

The tighter the lock, the more resistance you will have while panning, it should only be as tight as is necessary for your usage. In general, it would not be wise to go much beyond hand tight as it may damage the head. If you have any further questions please email [e-mail] *Andrea

[@_baxter]

Ok, thank you.

[@ChessBoxin]

how do these 2 compared to the Manfrotto MHXPRO-2W 2-Way Pan/Tilt Head?

[@BandH]

The MHXPRO-2W is smaller than the heads featured here and lacks some of the features of those heads. Some features the MHXPRO-2W lacks would be drag resistance, a built in counterbalance system, and a wider support platform/quick release plate.

[@_baxter]

I got my 500AH coupled with a 055prox. Is that too much?

[@BandH]

Not at all. Nice combination. Robust and extremely stable for Its weight and capacity. bhpho.to/2aJiHo6 >Mark

[@samw636]

can 500AH be use with manfrotto Be Free tripod

[@BandH]

+Samuel Wijerama The Manfrotto MVH500AH Fluid Video Head with Flat Base would be compatible with the Manfrotto BeFree Compact Travel Aluminum Alloy Tripod. It is important to note that the flat base of the head would be larger than that of the tripod, when the center column is extended it would make the tripod more top heavy. If using this combination, weighing down the tripod is strongly recommended. *Andrea

[@A10TOES]

I am needing a quick release plate for my Manfrotto Tripod Model 3031 Are they available; what number do I need to order a plate please. TY

[@BandH]

A10TOES Unfortunately, the Bogen/Manfrotto 3031 is the model number for the tripod legs, not of the tripod head. To make a recommendation for a quick release plate, I would need to know the model number of the tripod head you are using on your Bogen/Manfrotto 3031 tripod. If you can send this information to us at askbh [at] bhphotovideo [dot] com, we could then assist you with your inquiry.

[@A10TOES]

Alright, TY. I was given this tripod by my uncle who is no longer w/us & apparently the plate was left on his cam or was lost. Is it possible to send you a photo of the head; I've looked for a number on the head & maybe I am not seeing the location of the number. TY "Donna W."

[@RobertKingofMaine]

Good brief review. I liked it.

[@_baxter]

Is it ok to get up to 10lbs of weight - Camera + Accessories? I want to add rig with a Cage and Mattebox

[@mitchellhughes5180]

I have the 502. It blows.

[@dan_hitchman007]

It's really not a review without unbiased pro and con comparisons to other similar brands and models. Otherwise, it comes across as a biased infomercial for one particular brand. In this case, Manfrotto. FYI

[@jjayzz05]

Question, I heard that this specific fluid head can pan left to right on the head if installed on Manfrotto monopods such as the 561BHDV or any of its kind. Is there any truth to that? Perhaps on a separate short video explaining it? Thanks