Revolution Pistol Silencer Maintenance and Tutorial

PLEASE SEE BELOW FOR RIFLE CALIBER RATINGS AND REQUIREMENTS
Griffin's Revolution Series includes:
REV 9: 9mm 6” x 1.375”
$795msrp 11.2oz (Full Length) 9.7oz (Short)
SPL: 124db (Full Length) 127db (Short)
REV 45: 45acp 2” x 1.375” $849msrp 12oz full size, 10.5oz (short)
SPL: 130db (Full Length) 138.5db (Short)
Features:
Modular for length Rev9 7.6” full and 6.1” (short) Rev 45 8.2” full 6.7” (short)
Integral 3 Lug interface available (Full stainless construction)
Taper Mount Minimalist Blast Shield interfaces for Taper Mount support
RTZ™ (Return to Zero) baffle technology, provides locking assembly
17-4 stainless steel and 7075 aluminum material construction
Melonite QPQ, H900 heat treated, and Mil-Spec Type 3 hardcoat anodized
Take down tool included
Piston included, 1/2x28” with Rev 9 and .578x28” with Rev45
End user serviceable
Caliber Ratings:
Rev9 9mm full auto rated, Rev45 45acp full auto rated
Rev9 & 45, ALL configurations below - 5 TO 7 ROUNDS then allow to cool to ambient temperature. - These ratings are intended for sporting (hunting) use only.
Revolution Rifle Rating
Full Size w/ K-Spacer & Mini Blast Shield
300 BLK Super 9”
5.56mm 11.5”
7.62x39 14.5”
K Configuration w/ K-Spacer & Mini Blast Shield
300BLK Sub/Super 16”
5.56mm 16”
7.62x39 16”
3 Lug K and full size
(7.62x39 for CZ527 only)
300 BLK 8” Sub
300 BLK 16” Super
5.56mm 16”

[@reker.a5790]

Where is a new video showcasing the revolution series?

[@reker.a5790]

We want to see more comparison videos. You need to up the marketing game. Rugged is a popular name now

[@user-pc9it8ng9y]

Appreciate the video, in large part helpful, with a couple of questions remaining. I have a Revolution 45 (gen 3) and am interested in taking advantage of its expanded capability by also configuring the suppressor for light-duty rifle use for hunting (.45 LC on a lever rifle). The video demonstrates setting up the suppressor for rifle use in both the full-size mode (taper mount mini shield with booster extension), and the shorter size by removing the booster extension, both using six full and the one half baffles. However, there is no mention of an option for configuring in the full size using all of the baffles (9+1). What is the thinking regarding using all of the baffles in the long configuration? The second question is more basic, regarding the orientation when stacking the baffles . . . . should the square notches near the cone end of the baffle line-up with each other, or alternate in the stack? Thanks.

[@MidnightHozz]

This video needs an index in the description

[@wardog929]

When completely disassembling the suppressor, do you need to use a baffle alignment tool?

[@pcmacd]

Any fool can figure out what's in this video. Sheesh. You need a video showing getting a really dirty can apart, and how to clean it.

[@mannymacfly9567]

Can you redo the Optimus videos those are brutal and hard to follow.

[@GriffinArmamentOfficial]

Yes we're planning on redoing the Optimus video shortly!

[@Mountains303]

So is a barrel spacer required if I am using it on a 9mm carbine with a fixed barrel with a tri lug? Do I remove the piston and put in the spacer?

[@GriffinArmamentOfficial]

a 3-lug kit will completely replace the piston, spring, and retainer, no need for the fixed spacer unless you're converting the piston into a direct thread mount.

[@150DT]

When are you going to put out some videos on the Resistance 45?

[@GriffinArmamentOfficial]

Soon! more like these are coming.

[@ginoliberatoscioli9349]

Great video and products! I’m also highly interested in a Resistance 45 maintenance/ disassembly/ Assembly video. I have the Resistance 45 and I’m having problems when shooting my Glock 21, 19, and 17. The guide rod keeps interfacing and rubbing against the booster piston housing even after thoroughly cleaning the piston assembly with each of the corresponding pistons. I’m using S3F barrels if that makes a difference... I appreciate any help, thanks

[@blancs3030]

So is 300 blk louder in the long taper mount configuration vs the 3 lug mount because you removed 3 baffles?

[@domm.277]

more bafflers=quieter.

[@CommonSensePoet]

Who filmed this, Stevie Wonder? Was it too difficult to pan out so we could see what you were doing? Embarrassing video by Griffin. C'mon man!

[@texpatriot8462]

The video is not very helpful for users. Your camera needs to zoom in to better show what you are doing. You also need to do unboxing videos with setup for new purchasers. This is like ADHD as you Skip to accessories before you explain how to set it up in standard configurations.

[@GriffinArmamentOfficial]

Thank you for your feedback. Our media/marketing team has had some restructuring in the recent past and one of our primary goals is to provide more educational content, trying to be as clear and concise as we can with product descriptions