manroland Sheetfed Evolution

[@almirnick9977]

"Simply fantastic."

[@stealthtrees96]

Wow! Amazing press 👌

[@william.ecruzsoto2488]

y como se puede adquirir o entrar en contacto con la directiva de man roland

[@ericilland6141]

Joli retour sur le marché international au plus haut niveau des performances, bravo à la nouvelle équipe, restera à trouver les "good gays" à la vente!....

[@donovanvanheerden9496]

Im a minder on a 8col double coater 900 evo. All the bells and whistles on it but it always needs tlc from minders with years of experience in the trade. I pity youngsters coming through the ranks now. Its more science now than putting ink on paper

[@alexandremachadomachado2022]

sensacional ! manroland é nota 10 .....

[@jonjeffries3265]

At least 10mil.

[@iain3297]

So. In practice, still around a decade behind Heidelberg. Just being honest...

[@iain3297]

But if it's any consolation a decade before komori...

[@AndersonFerreira-wc9nk]

boa noite parabens pelos trabalhos e o desenvolvimento e qualquer dade eu rodo uma 700 4 cores mais veniz base de agua mais antiga vejo esse video me encentiva maos ainda gostaria de ter oportunidade de chegar nesse nível gosto de trabalhar com os equipamento da roland

[@فروسالجازعي]

لو سمحت انا طباع فوق اربعه لون هيدل بيرج برنت ماستر 2006مقاس. 52 حدثت مشكله اريد المساعده خرج. رول القماش حق المسح حق البلانكيت الي الراس الاحمر وانظغط الصرندل حق الطباعه. ايش الحل كيف اعالج المشكلهض

[@DannySardo1]

Can't wait to start working on this press. Another 18 weeks to kill

[@NarenMariappan]

Dear sir, thanks for serving the print industry. It is a very underrated industry itself. unlike gadgets which have gone far into common people, print is everywhere and least known technology wise. Therefore press operators too are less appreciated. Nevertheless, the industry is about satisfaction than appreciation.

[@josealbertorodriguezaguila476]

soy impresor de casi 20 años... y guuuaaaaaooooo espectacular

[@kamranmirza6898]

Nice machine good

[@ricardoarchila1970]

que bien ojala en venezuela pudieramos tener dichas prensas opero una roland 300 pero esto es unico

[@carloslisson9202]

Que tal estimado, Que ciudad e imprenta en labora en Venezuela?

[@ricardoarchila1970]

@@carloslisson9202 Hola buenos Días una Roland 300 , debido a los problemas que hay en Venezuela, me gustaría ver si no hay una oportunidad fuera como operador de una prensa.

[@markolahteenmaki7116]

Why not nonstop feeder and delivery

[@Cityzen1-p1n]

I love the term "master printer" they don't do anything there's no skill involved not like when I started my apprenticeship print was an art now it's a commodity

[@ffgille]

LOL, it is; áll is 'digital, nothing 'fingerprints'.

[@aswisshuman637]

Than learn book Print

[@conscienciapositiva8706]

I started my apprenticeship by the age of 16 years old. Roland Parva 2 colours with no alcohol!! I was born in 1963. High printing skills it was to be a printer and paper was also bad quality turning sometimes a nightmare setting up the feeder. I miss so much my apprenticeship but I would love to watch the present Master printers operating the old printing machines without alcohol!! (water sleeves).

[@jimbrown4456]

These machines are a lot more complicated than you realise

[@Cityzen1-p1n]

@@jimbrown4456 they are not....I've worked 4 colour machines with auto plate auto ink....it's boring not like when I first started out it was a skill to be able to print.

[@dp369]

Did someone say that there is no need to 'pull a sheet'?

[@manrolandinc]

david c , Someone did say no need to draw a sheet, but that relates to calibrating the color control system. On competitive or older systems, you would run the press up to color, reach target density and draw a sheet from the delivery to scan and confirm you have an "OK" sheet. Once scanned, you tell the press to take over control. That increases make-ready waste and time. With our InlineColorPilot system, the system calibrates inline and reaches target density and notifies the Printer it has reached the "OK" sheet target density. An Operator would draw the sheet but would NOT scan at the console to calibrate the system, because it's already done. To enter full production, the Printer simply switches the good sheet counter on and that's it. This is of course provided the sheet is on target. It requires the press be properly finger printed and accurate curves on plates to achieve.

[@dp369]

@@manrolandinc Once upon a time it was a tradesmans skill. Now it's terminology and electronics. Tell me - do your 'systems' set the ink rollers as well? Change a back cylinder jacket? I doubt it.

[@manrolandinc]

@@dp369 Even with the new systems, it still is and will always be a tradesman skill that achieves successful print and performance. The newer systems are designed to aid the Operator of the press to achieve a quicker result with fewer steps involved through technology.

[@conscienciapositiva8706]

Course not because there's a risk of the printer scratching one nail. High Tech!

[@kartikjangamani9063]

Wow nice machine

[@allopez9545]

They never show the printed sheet of second or third job. I'm sure it's good, but..

[@babathakurthakur8623]

Nice

[@karinbrunabruna8084]

Roland São as melhores máquina amo eu roda um 700 6 cores mais 2 verniz

[@deivisongonsalves356]

Rodei uma também amigo, que máquina top.

[@mariogeis9558]

pantone 2715 c was my lap test color. note 6

[@vitalisemeka4045]

The speed is awesome how much does it cost

[@GráficaLetras]

hermosa maquina!!😍👍

[@ronnyrock1977]

what about noise level

[@kamalvyas1960]

Awesome machine. Great engineering.

[@felixgracia1392]

Buenos días busco trabajo soy mecánico de maquinaria de imprenta y editoriales de 70 años entrenado por los alemanes y checos y otros Félix García el Salvador cel 60101612 gracias

[@amirshahbazi7]

ITS VERY GOOD

[@MohamedAli-sg4qf]

we have Roland machine for sale whatsapp no 09884371096

[@marcosalbuquerque2557]

operava uma geoman 4 cores na folha de sp

[@mark.tiggerman5178]

Poor Minders . Paid a pittance now . Not anymore salary than 25years ago . Look at Classifieds for Litho Minders .and don’t forget Lad your as good as your last job

[@glocksantana853]

what are you talking about

[@targhimustapha6620]

NICE

[@atulohri6967]

what is the price of this machine

[@NarenMariappan]

INR 9cr plus. Depends upon the variety of combinations size and features.

[@Eddieboy3385]

In the millions

[@jonjeffries3265]

These operators probably never had ink on their hands..

[@ChandanSingh-eg2zf]

Plz send me Indian dealers information

[@MohamedAli-sg4qf]

chandan we have Roland machine for sale whatsapp no 09884371096

[@АлексейХарламов-с5о]

Попробовал бы он у нас в россии так поработать когда на приладку дают 300 листов. Это не печатник а кнопочник ....

[@pinaplast2355]

А вы на какой машине работаете?

[@АлексейХарламов-с5о]

@@pinaplast2355 на sm74-5+l 2003года

[@pinaplast2355]

@@АлексейХарламов-с5о я тоже раньше на sm 52 работал и Roland 505. В апреле перешёл в другую фирму, теперь печатаю на Roland 705, 2015 года.

[@alanread2836]

I ran a heidlberg 12 col carton press . single manned, ie, on my own, with all the gizmos, I used to crawl out completely knackered. I left the trade. These machines will kill you.

[@seanknapton7449]

I've just come across this vlog and you are right,no money or conventional skill in printing anymore,I left the trade 5 years ago and I'm happy being paid £12.50ph for cleaning and mopping floors

[@nelsonvallarta9611]

i only have 100K thousand pesos can anybody fund me this machine?

[@andhbhaktokabaap2300]

Kabayan pahiramin mo Naman ako Ng 20,000walang wala ako eh..

[@punitvishwakarmarewamp9192]

I. Me warking

[@francesco6626]

6 mesi e la rottami 😂😂😂

[@FTWBloody]

"Master printer" but don't do anything except changing jobs and waiting for the press to do everything on his own. Productivity Is killing this work, sad.

[@jeffdewan3068]

A lost art form, I’m not a master pressman and I’ve been doing it for forty years. Now days they hire anyone who can run a laptop. Sad but true 🤬

[@francesco6626]

😂😂😂😂😂😂