manual conversion: gearbox clutch/pressure plate clutch master clutch alignment tool flywheel + hardware driveshaft clutch pedal + dust boot b stamp cross member gearstick rubber boot rear main seal clutch fork bearing sandwich plate brake pedal cover penetrating oil degreaser steps 1. lube necessary bolts 2. drain auto trans 3. remove exhaust 4. remove driveshaft 5. cut lines 6. remove auto 7. remove flywheel 8. degrease back of motor 9. head drain? 10. remove spigot bush 11. remove rear main seal 12. install new main seal 13. install new spigot 14. install sandwich plate 15. install flywheel (loctite) 16. clean flywheel 17. install/align clutch plate 18. install pressure plate 19. remove alignment tool 20. remove/install clutch fork bearing 21. install cross member to gearbox 22. install clutch fork to gearbox 23. install clutch for dust boot 24. remove interior (auto shifter) 25. install gearbox 26. combine drive shaft front/rear 27. install driveshaft 28. cut firewall for clutch master 29. install clutch master 30. install clutch pedal 31. bleed clutch 32. cut brake pedal down 33. fill gearbox with oil 34. install shifter boot 35. cut auto loom inhibitor 36. splice reverse lights 37. install cluster sticker 38. check list test drive
@Alex-vz2jz2 ай бұрын
What a goat. I want to manual swap my Laurel c35 so the process is similar
@DaxReihana-RFB Жыл бұрын
Hey guys I forgot to mention the R33 front half Manual driveshaft that I used was from an ABS model 🙂
@neutraldown62712 ай бұрын
hey bro, just wondering how you find the auto brake pedal? does it feel weird being lower?
@ryanadams9884Ай бұрын
Does it matter if it is a turbo or non turbo driveshaft? Just collecting parts for the same conversion.
@billyflavell5295 Жыл бұрын
Great job mate!
@omarhuerta260 Жыл бұрын
Should list out what you bought to help us out 😅
@ebenn733 Жыл бұрын
Isn't the speed sensor in the gearbox? I am currently undergoing a manual swap with the small box. Also the RB20DET gearboxes (Which is the N/A box) comes with a cable sensor?
@chayyboi11 ай бұрын
Rb20det boxes and na rb boxes are different. The gears are thicker on the turbo boxes
@SoldierOfFortune9009 ай бұрын
Wow love your work! If I could do that, I'd buy an auto 4-door Skyline in a heartbeat. They are cheaper and less beten up
@neutraldown62714 ай бұрын
hey bro mean video, just wondering roughly how many hours this took you? cheers
@Brax267 Жыл бұрын
for a home job and by yourself fuck you did a clean job new sub !!
@DaxReihana-RFB Жыл бұрын
Cheers thanks man! 💯
@strike_420x Жыл бұрын
Good shit man!
@DaxReihana-RFB Жыл бұрын
Thanks man cheers for the support! 💯
@teawherangicassidy-whiu5716 Жыл бұрын
Love the mahi bro 💯💯
@DaxReihana-RFB Жыл бұрын
Cheers bro appreciate it! 💯
@bpi537 Жыл бұрын
sick! where you from man?
@DaxReihana-RFB Жыл бұрын
Thanks man! From New Zealand 👌
@daveboyo920 Жыл бұрын
Hi bud, can you give me the info for the overlaid cover for the dash, gotta get one !!....great upload and new sub.....👌👌👌
@DaxReihana-RFB Жыл бұрын
Hey bro I brought it on Trade Me NZ. Was under R34 Cluster Facia! Thanks man 💯
@daveboyo920 Жыл бұрын
@@DaxReihana-RFB much appreciated bro, will look it up hopefully they ship to the UK.....🤙🤙
@stevenlarkin28695 ай бұрын
Where is the cluster cover from
@Mani-kh6gn21 күн бұрын
Since the mechanic done all my conversion, the dash got abs and at transmission light comes on. The speedometer stop working aswell only revs going. Wat could he done wrong?
@kaydenplayle4232 Жыл бұрын
Great vid bro! Quick question for ya, what sized drill bits did ya use for clutch pedal?
@traceereihana9960 Жыл бұрын
Awesome
@gpgaming21366 ай бұрын
I wanna do a manual swap on a primera p11 so bad
@professorsecret49608 ай бұрын
You don't keep your 34 covered outside?
@thepoliticalpatty918410 ай бұрын
Hey bro, how did u go abt auto trans light? Mines constantly got auto trans on
@imCylo Жыл бұрын
Hey, just curious, how much did this swap cost?
@jamieoreilly2064 Жыл бұрын
Does that cluster stick on cover the auto bulb that comes on after removing the trans?
@ebenn733 Жыл бұрын
You can just take the globe out. It is really easy. But by jumping the wire the ECU should think that it is neutral
@harmonymaniapoto487710 ай бұрын
Kia Ora, how much did this cost you all up for all the parts? Can you list the parts please
@DaxReihana-RFB10 ай бұрын
Hey! Sorry I’m not good at replying on YT 🤦♂️ Message me on insta 😊
@avinashsingh76 Жыл бұрын
What gearbox u use from what car?
@ebenn733 Жыл бұрын
Looks like an RB20DET trans they mainly came out in the R33 N/A (RB25DE motors) cars and the R34 HR models (RB20DE motors)