Manual Transmission Fluid Change (Tacoma DIY / How To)

[@elcofresi6499]

Thanks for your guidance in my Tacoma maintenance. Your detailed instructions and torque requirements are second to none.

[@stevenlocke883]

excellent. Short, to the point, and useful

[@KFloTacoma]

Awesome! Thanks for watching and supporting the channel!

[@godofyota9541]

Good on you my man.. You are the first video that used the right fluid for job! Red Line MT-90 is the only way to go!

[@KFloTacoma]

Yessiree, MT-90 is the only trans fluid I use in my MT vehicles

[@danielburns311]

Perfect!! Thank you for making this video short, and to the point. Great info. Exactly what I needed!

[@vanvan5709]

Very good video, to the point and no fluff. Thanks

[@KFloTacoma]

NP bro. Please help my channel by sharing my vids!

[@Jimii89]

Man great video. Straight to the point no screwing around.

[@eomerrohan2254]

Great video that enabled me to locate drain and fill plugs on my 08 FJ Cruiser 6 speed MT.

[@freezin48]

Thankyou for a perfect no non-sense video

[@KFloTacoma]

Thanks for watching and supporting the channel!

[@bushmaster1740]

People don't want to use 75w-90 GL-5 GEAR oil like Mobil 1, it's too slick for the synchros to grab. You want a GL-4 MTF manual trans fluid, like Redline's MTL line, or imo Synchromesh....which is thinner too, and ideal for winter.

[@masterkeyify]

that is literally what he used in the video

[@imkaneforever]

Valvoline sychromesh?

[@frankordonez2826]

Exelent explained the right how to do the job

[@HOMEBREW4LIFE]

That was a perfect video!! Cheers!

[@KFloTacoma]

Thanks for the kind words!

[@preetkangg]

@@KFloTacoma hi, do automatic transmissions have transmission fluid filter to replace too???

[@jcreeker5581]

Thx for the video. Your thoughts on manual transmission oil rated for GL-4, GL4/5, and GL5? From what info is out there, gear oil rated GL4/5 and GL5 has more sulfur in that can damage the syncros of a manual transmission. That is what what GL-3 or GL-4 oil is recommended.

[@eomerrohan2254]

See my previous comment. Local Toyota dealer-provided schematics pictured a different MT and online sources said transmission was an RA61F but its online schematic was not mine. So this is the only vid or source I found for locating drain and fill on 6-speed MT for an 08 FJ Cruiser with full-time 4 wheel drive. Thanks.

[@ItsSquonkingTime]

Thanks for the help!

[@KFloTacoma]

Happy to help! Thanks for watching!

[@brianrogers6731]

Thanks for posting this

[@KFloTacoma]

Thanks for watching and supporting the channel!

[@deeman77777]

great video - very helpful content.

[@KFloTacoma]

Glad it was helpful!

[@alexalanis4830]

Where do you buy the pump?

[@shiddy.]

don't forget the new crush gaskets for both plugs

[@davewilson76]

Thank you!

[@noemaldonado437]

Thank you

[@cardellcampbell4450]

Can you make a video for an automatic transmission?

[@KFloTacoma]

It's on the list of video tutorials

[@curtisholborn9415]

Enjoy your video's. Would like to see you do a manual transmission oil change on 2016 n up ( 3thd gen) Tacoma

[@KFloTacoma]

I'll add that to the list. I have a couple of buddies with the 3rd gen

[@bigwooly8014]

​@KFloTacoma did you ever make that 3rd gen video?

[@johngallagher753]

Interested also. For when i need to change mine as well in my 3rd gen​@@bigwooly8014

[@tylerg9864]

Nice, simple video 👌

[@shul5684]

i have a mazda.. I had a leak on the drain plug.. I used 40 ft lb to tighten it... no leak after that.. I just hope I didnn't messed up the rings.

[@KFloTacoma]

It depends on the size of that plug. What's the torque spec called out? Did you replace the crush washer?

[@cedricmendoza1305]

should i change my first gen tacomas trans fluid? it has 171 k miles and its never been changed

[@davidwu5444]

Hi KFlo, I have a Manual Tacoma 2017. Do you know where is the clutch fluid reservoir? Thank you for the video!

[@KFloTacoma]

Mine's a 2011, the clutch reservoir is the same as the brake fluid reservoir. You can trace back the accumulator and it should lead you to the reservoir

[@4Runner21]

We own an 07 Tacoma 4Cylinder Manual Transmission with over 250K miles on her, and we have owned since about 30K miles and we have never drained the transmission fluid, nor rear differential fluid, nor engine coolant either. Would you suggest doing these services at this point or just leaving it be, since such high miles and replacing these fluids especially on manual tranny might do more harm than good?…

[@Stevebringsithome]

Do you need to jack it up?

[@KFloTacoma]

Only if you can't fit underneath it. I can get underneath my truck without having it on jack stands - I also have a 3 inch lift and 35 inch tires

[@user-ds9mx30j6a]

@KFlo Tacoma Thank you for all the info, you answered all my questions but one - does the transmission fluid temp sensor have to be reset/recalibrated on the manual transmission, like I've seen other people do with Toyota's automatic transmission?

[@KFloTacoma]

I've never had to do it

[@user-ds9mx30j6a]

@@KFloTacoma Perfect, thank you!

[@manuelramos4608]

After that am I good to drive? Or should I go through all the gears first so all the fluid goes through all the gears like how an automatic transmission would work?

[@gooseygander286]

There’s no gasket needed for the drain plug right?

[@KFloTacoma]

There's a crush washer on the bolt that you can reuse

[@jimbernard8964]

Excellent! Thanks for this. Do the fill/drain bolts get crush washers?

[@KFloTacoma]

I know the drain has a crush washer (you can see it in the video if you pause it at 1:18), I can't recall the fill though. Regardless, these crush washers you can just reuse.

[@chadpaul9799]

You dont emphasize replacing the crush washers. Is that necessary every time or only if there is a problem with the old ones?

[@KFloTacoma]

Honestly, I've used the same crush washer for years on my vehicles. It's really only an issue if it's leaking.

[@VasoIvanovic-z9l]

It is OK to add new gear oil in manual transmission from top through the shifter hole in 2004 Toyota Tacoma?

[@alexmaccity]

no filter change?

[@KFloTacoma]

No filter in manual transmission

[@alexmaccity]

I read that on google after commenting. Thanks for verifying to. I just think one of these are going to be my next vehicle.

[@jasonsmith4243]

Does the pump fit the fluid bottle or did you have to modify?

[@KFloTacoma]

No need for modifications, it was an exact fit

[@jamesbreeze8809]

Same process for the 2005 2.7 l ?​@@KFloTacoma

[@timmyopally]

Kflo - thanks so much for all the content and also being a god of the comments section. 2 qs - why 75w90 vs mt90? The haynes suggests either, but I'm not sure. 08 6spd 4x4. Secondly; do xfer case and transmission fluid need to happen at the same time? I'm probably due for both but trying to troubleshoot a transmission sound and can't get redline products locally very easily, might be stuck w/ 2qts for a while and don't want to mix/match fluids too much. Thanks in advance!!

[@chrisb9945]

Do I have to replace the automatic transmission filter when changing out the fluid?

[@KFloTacoma]

I would recommend it

[@chrisb9945]

Can you do a video on automatic transmission control solenoid cleaning or replacement

[@thetrojan5]

Are you gonna put a video on how to change the transmission fluid on an automatic Tacoma?

[@KFloTacoma]

Yes sirree! Hang tight on that one. I have a couple of friends w/ automatic transmissions that need flushing soon

[@thetrojan5]

@@KFloTacoma thank you

[@topgun4499]

You show mt 90 and say 75w-90 which one is it for 04 tacoma MT thanks

[@KFloTacoma]

MT 90 has the same specs as 75W-90 but is formulated better for Manual Transmission (hence MT)

[@topgun4499]

Thank you Sir!!!

[@RON-MEXICO911]

is it the same for a 2005 Toyota Tacoma 2.7l prerunner?

[@mavigogun]

What year/model vehicle was this?

[@KFloTacoma]

2009 Tacoma TRD Sport 4x4

[@7Steelers7]

My transmission failed. The fluid looked a little foamy. What would cause that?

[@KFloTacoma]

Foaminess is usually a sign that water got into the system

[@7Steelers7]

@@KFloTacoma I have no idea how water could have gotten inside my transmission. I've never gone through water. I do spray my engine and underbody frequently but have been doing that for years.

[@70Marc]

How do you know when it’s due to change?

[@KFloTacoma]

I change it roughly at the same time I change the diff and transfer case. I do it every 33K Miles. (i.e. 33K, 66K, 100K etc)

[@70Marc]

What I meant was, do you look for a certain colour of your fluid? Guess you just do it at your set intervals, eh?

[@KFloTacoma]

Yup, set intervals - just like regular motor oil changes

[@PhillipDavis830]

My 2012 manual transmission has the drain plug facing the passenger side on the bottom.

[@Texasmetalmusic]

But what year model Tacoma ?

[@KFloTacoma]

2009 TRD Sport double cab manual transmission

[@Texasmetalmusic]

KFlo's Tacoma Build ok having to do a fluid change on every thing in a 03 2wd 2rz 5speed Taco that I got at auction for $500 still runs good but has almost 400k on it

[@KFloTacoma]

500 is cheap though! That motor will last you another 500k

[@Texasmetalmusic]

KFlo's Tacoma Build that’s what I have heard also if it can at least last until 800k that’s money well spent but looking to change out the bench seat with a bucket seat with the extra third seat in the middle that has extra cup holders/storage/ arm rest setup. Also taking the front grill lights bumper and grill guess from a 4Runner to put on this one since the bumper is missing. And then also doing load carrier springs from a Chevy 1500 to help with the 1600 max payload it has since I will need it to carry half yard of dirt rocks or road base when ever I need it too. But also the only reason for getting the Taco was to get my son into a stick shift truck for driving to school or use the geo prizm 5 speed.

[@morphius747]

@@Texasmetalmusic did you do a seat swap yet? I wantt o do it to my 96 taco

[@brandonanderson7363]

@KFlo Tacoma shot in the dark here hoping you can help. I just had a new URD stage II clutch installed, resurfaced flywheel, and clutch masters hydraulic release bearing. I also have a URD short throw shifter. Sometimes starting in 1st gear it shudders. Occasionally after ive driven for awhile in the heat at a dead stop it is nearly impossible to get into 1st gear. I am able to shift into 2nd and then it slides right into 1st. Same with shifting from 3rd to 1st (goes right in) any ideas of what could be causing these issues? I appreciate any help!!

[@KFloTacoma]

That seems to be a normal thing according to this thread: www.tacomaworld.com/threads/shifting-into-1st-gear-problem.574481/ I guess people just get used to it. It may not be an immediate issue as solutions may require a rebuild of the trans

[@brandonanderson7363]

@@KFloTacoma I read through tacomaworld and somehow missed that thread. Its crazy that I've never had this issue and have never owned an AT! Even on the old oem clutch in the tacoma I didn't have this issue. Looks like I need to learn more about synchros. My bro in law installed everything so I might have him take a look. I'm no mechanic but it just feels like there's something that can be adjusted to correct this or at least keep it from happening as frequently.

[@hippystinx1]

Mine shudders under partial engagement going into 1rst or reverse. notice it more reversing because i am often on the clutch reversing as the reverse gear is a bit to fast for my liking some times.

[@jeepguy009]

What about the filter

[@cyrusstites4847]

Yo wrong fluid pump man! I ordered the one you linked and it doesn’t fit the redline bottle.

[@KFloTacoma]

my mistake dude, I corrected the link. you can still use the fluid pump by cutting the top of the bottle and fitting the pump at the wide side of the neck of the bottle. you can tape it onto the bottle to keep it from sliding around

[@cyrusstites4847]

@@KFloTacoma all good, it happens. I’ll give that a shot, thanks

[@Skyler-s8f]

...75w-90? That's for the transfer case????

[@harley092355]

Do a 2010 V6 Tacoma valve cover gasket

[@KFloTacoma]

Its on the list

[@bamodo87]

What type of oil does a 2.7L 4x4 manual transmission take

[@KFloTacoma]

I believe 4.6 Pints: www.amsoil.com/MyGarage/VehicleLookupPrint.aspx?url2=2009+TOYOTA+TACOMA+T

[@bamodo87]

Thanks

[@brianvw5301]

Why do you say the fluid needs to be 75w-90 but then show MT-90? Is it the same thing?

[@KFloTacoma]

MT-90 is the same weight and viscosity spec but MT is for manual transmission

[@bushmaster1740]

MT-90 is the thick GL-4 manual trans fluid, same visc as 75w-90 GL-5 like Mobil 1, but without the friction modifier additives.

[@ecko2013]

How often does it need to be changed

[@KFloTacoma]

Every 30,000 miles

[@KFloTacoma]

www.tacomaworld.com/threads/toyota-tacoma-maintenance-schedule.435604/

[@ecko2013]

Ok thank you would it affect the transmission in any way if I havent done it for like 60k

[@KFloTacoma]

Nothing short term. I would recommend changing it soon though

[@imyourhuckleberry357]

Absolutely "Do not" put in any that is GL-5 rated or rated for both 5 and 4....Use GL-4 ONLY!!! You will eventually ruin your transmission with GL-5.... 5 has a lot more additives that eat up the soft metal synchros in the manual transmission and eventually ruin it.

[@jamesbreeze8809]

Your leak to the pump doesn't fit mt/90 qt size bottles. it's only for gal size bottles

[@jubankta1627]

Hi KFLO first off,Great videos!!Second I had a mechanic up in a carrier bearing and a u joint on my 2007 Tacoma I was told I had a bad wheel bearing but this mechanic said no the bearing,My truck still has a bouncey type rumble...He then came back to see why and said I might need a torque converter,But felt new u joints front and rear might fix this,It did not sadly enough!!Any ideal where I should go from here?!Thank You for all you do I’m sorry to ask this question I’m just at a loss and don’t have enough money to replace every nut and bolt on this truck right now!!Thanks again if I’d of seen your videos sooner I might’ve tried this myself!!

[@KFloTacoma]

Here are my questions: Is the noise coming from the rear or the front? Does it get faster as you drive faster? Does it go away in 4 wd?