MAP sensor from W204 Mercedes C 180 CDI Diagnose , Test , Clean OM651

How to test the MAP sensor or Manifold Absolute Pressure sensor / boost pressure sensor from this Mercedes w204 C180 cdi . In this video you will see the voltage values from the connector , the ohms resistance of the sensor ( bench test ) and how to look on the live data
Disclaimer :
This youtube channel :"doit_vehicles " can not guarantee that this information suits your car . "doit_vehicles " assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk.

[@chrisisho2557]

So 3.7 volt at the middle wire means good sensor or bad because other map sensor reading 1.3v, I don’t know all has same voltage or no ?

[@jorgecunha3465]

Spot on mate thumbs up for you

[@mosaabmagory2357]

Hi man please till my a normal voltage for a signal map sensor for tirpochrger

[@alrifainidal]

what is the year of this model? and do you know where I can find the wiring diagram for Mercedes for free? thanks for the video Mate

[@doit_vehicles]

that would be simple , just bypass the original connector , than wire it up to the battery with a switch

[@Sauliokas]

My MB c250 cdi got problem. On low rpm (1300-2000rpm) on acceleration it jerks. No faults. DPF removed, EGR dissabled. New turbo solenoids. Both turbo refurbished. New intake manifold without swirl flaps. Then it jerks, we se to high boost. Maybe just the sensor sometimes going mad… 2 years already, nobody can find the problem.

[@michaelb.5500]

Like This? kzbin.info/www/bejne/b4u5mH6DnJeip8U

[@federicosalgues9005]

I got the same same problema as you, I did all the thing you do, and still jerk, specially on cold morning.

[@ИльяСеменов-м8ъ]

hi guys, did you find the reason?