Marantz 2250B Repair and Service Part 1 BG006

  Рет қаралды 19,831

Blueglow Electronics

Blueglow Electronics

Күн бұрын

Пікірлер: 22
@cneff3494
@cneff3494 5 жыл бұрын
Refurbing my dad's 2250B. Thank you for this. I jumpered the power switch years ago, but it now has a light out so i think it's time to fix it proper, including that pesky power switch. Dad would be so thrilled to know that it's still running.
@craneoperator4
@craneoperator4 9 жыл бұрын
had a 2250B...sold it and kept my Harman Kardon 730 Twin Powered...as it has an awesome sound
@markmosk
@markmosk 4 жыл бұрын
I'm only 1:12 in and I'm so frickin' excited about what I'm about to learn.
@CaryFlyBand
@CaryFlyBand 6 жыл бұрын
Mark, you are great! The way you do your videos make it seem like we are all there right next to you! My 2245 came with no power switch, (just use a pwr strip to on/off it) and I'm getting ready to install my new one that came w/a Snubber!? What's a Snubber? Anyway, Thanks for all you do for all us audio wannabes!!
@mdzacharias
@mdzacharias 7 жыл бұрын
Probably the best bench amp I ever had was a 2250B. Always regretted selling it. Eventually picked up another 2250B from another tech. Not quite cherry but pretty good. Complete service of course, and I really like the look with white LED's for the dial and blue LED's for the meters.
@drhearp
@drhearp 9 жыл бұрын
Thanks Mark! I'm learning a lot with these.
@gime3steps
@gime3steps 4 жыл бұрын
This kind of stuff intrigues me.
@gime3steps
@gime3steps 4 жыл бұрын
I've got a 2252B and I need to find the bottom supports on the case. Any ideas where to find them?
@gime3steps
@gime3steps 4 жыл бұрын
Oh, I found them, omg123hibod had a link, thanks!
@uber-jaianada
@uber-jaianada 6 жыл бұрын
Thanks for this video. You mentioned replacing a specific transistor in the phono preamp stage. Would you be willing to share with us the original part number and the recommended new transistor please?
@chtyan
@chtyan 11 ай бұрын
Have one of these and everything works perfectly except the FM doesn't have volume like it should and the stereo light doesn't come on but it is in stereo. Works for all other inputs. Have cleaned everything. Any Ideas? Thanks
@vdtogt
@vdtogt 8 жыл бұрын
Thanks a lot for this video. Really appreciate it!
@ironicThrust
@ironicThrust 9 жыл бұрын
I have Marantz Model 22 stereo receiver with a missing knob. May I know if 22xx series receivers knobs could be use on model 22?
@aquanaturalsimples4666
@aquanaturalsimples4666 5 жыл бұрын
Hello, good morning, could you help me. I have a problem on the right side, which does not go through the resistance of 100 ohms. Could you help me, I'm from Brazil.
@mkmeggy2
@mkmeggy2 8 жыл бұрын
Hello I have marantz 2230 I would like to clean the contact of base, mid base and etc. how can I get to it? Do I get to it from bottom of the unit?
@UnivegaSuperSport
@UnivegaSuperSport 9 жыл бұрын
Any chance they use that blue stuff on the screws the same way they use a wax seal on important messages or letters? Kind of like a calibration seal in order for the factory to determine whether they unit has be worked on by other hands?
@jimbobrockman4191
@jimbobrockman4191 5 жыл бұрын
The blue stuff is a light epoxy based paint. It essentially has two uses: the main use is to keep the screw from loosening, the other is for warranty purposes; if the screw is removed, the seal is broken and thus voids the warranty.
@jeffa2914
@jeffa2914 9 жыл бұрын
Hello. recently i acquired a pair of 2250b. One was used as a preamp, in order to that the amplifier section was disabled. I tested with a earphones and as a preamp it works fine. The second one was use only as amplifier by disconnecting (i suppose...) the 7-pin conector, because the board for tone control has no the pair of chips BA312, so, i changed the preamp board installing it in the marantz which only works as amplifier. For my suprise it did not work. I think the preamp section is disabled, but i dont know where i can start searching. I am not technician in this, i only want a marantz working good. If you wish a marantz only for amplification, what would you disconnect for that purpose? Thank you a lot
@omg123hibob
@omg123hibob 9 жыл бұрын
In regards to the power switch, irebuildmarantz.com has a power switch that for me anyway was pretty much drop in and ready to go. I had to buy one for my 1550. It was $10 including shipping.
@aquanaturalsimples4666
@aquanaturalsimples4666 5 жыл бұрын
I have an emal, could laugh send you the photos
@aquanaturalsimples4666
@aquanaturalsimples4666 5 жыл бұрын
could send by other means because my internet is very bad
@davidrichard3322
@davidrichard3322 3 жыл бұрын
Je suis satisfait
Marantz 2250B Repair and Relamp Part 2 - BG008
59:55
Blueglow Electronics
Рет қаралды 40 М.
Marantz 1030 Amplifier Service, Repair, and Bias BG007
1:00:44
Blueglow Electronics
Рет қаралды 76 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Another Marantz 2270 Service & Repair - BG058
52:40
Blueglow Electronics
Рет қаралды 70 М.
Marantz 2238b Repair and restore
1:02:48
xraytonyb
Рет қаралды 52 М.
Marantz 2250B Service & How to Bias Part 3   BG009
22:29
Blueglow Electronics
Рет қаралды 13 М.
Marantz 250 Meter Replacement
50:46
xraytonyb
Рет қаралды 9 М.
Electronic Circuitry Diagnosis And Fault Finding! [Repair]
1:14:50
Mr Carlson's Lab
Рет қаралды 981 М.
Power Washing My Marantz 2230 And Seeing If It Still Works
12:03
Marantz 2238 Receiver Restore
1:00:13
xraytonyb
Рет қаралды 32 М.
Buying an Oscilloscope and Accessories For Audio Bench Work and Testing
34:08
Blueglow Electronics
Рет қаралды 94 М.