March fire drill 2023

[@FireRescue80]

Strange to hear this system running two different coding options.

[@firemarshallrj9838]

Yeah Ik right it will be better. It was it on March time/Tempero, or even better it could’ve stayed on March time in the first place

[@maiyo8518]

I do not want the mechanical horns to change.🙁

[@officialsimplexguy]

Sheesh that must’ve been a nasty surprise. My school has 9838s and 9219s in temporal. I’d be upset if they started doing continuous all of a sudden.

[@Fahrenheit4051]

What really disappointed me was going back to my high school to do the inspection and finding out that the 4050-80+4051 signals were doing continuous instead of march time. Continuous is my favorite code for newer mechanical horns like the -9838 and -9219, but 4051's sound better on march time, and steady incandescent light plates are boring. The problem with doing temporal with non-synchronizable strobes on the same circuit as the horns is that they produce an erratic flash pattern that looks like crap and ends up being less than 1 Hz.

[@officialsimplexguy]

@@Fahrenheit4051 depends on the strobes. Yes, most will flash less than 1hz but there are some exceptions. The 9219s at my school all flash in sync with the horns so In a way, It works out better than if they were on continuous. And I agree, steady lamps are boring. Kinda defeats the purpose of a lamp because when lit continuously, they blend in with the light in the building making it difficult for someone to notice and understand what their purpose is. But hey, that’s why strobes exist.

[@sammymorris9430]

These are actually 2901-9846’s. They’re much louder, and have a metal plate instead of a plastic one.

[@officialsimplexguy]

@@sammymorris9430 well aware of that man

[@Luke202-z8b]

not only the horns this time are in continuous, but ngl when the alarms start at 0:03 it sounded like a sweet train horn

[@patrickstarphotography]

I like the continuous and code 3 being used. I wonder if they changed the coding from the panel or something like that

[@firemarshallrj9838]

Yeah it was from the panel

[@maryjomusovich3596]

@@firemarshallrj9838yes

[@Rod01-s2k]

Lol 😂 Love it!

[@firemarshallrj9838]

Thx man and what’s funny😂

[@AlessandrasFunPlace]

2:06

[@geoffg8840]

​@@firemarshallrj9838where you been hiding at buddy? Need new videos. :)

[@jacobisworld9516]

All Kind Of Horns

[@RJARRRPCGP]

But, doesn't seem as "franken-mix" as the last school I was at. That dead 2901-9833 by the gym doors, was replaced with a System Sensor MA, which was installed into the 2903-9101 by 1998, IIRC. (xenon-strobe version) The 2901-9833 didn't even make it to 2000, while most on the campus, still seemed OK in 2002. The Simplex 2001 was in continuous. Then to the right of that 2903-9101 by the early-2000s, if not shortly before, a Wheelock MT got installed. Then on the ground floor: What looked like a dead 2901-9806 replaced with a System Sensor MA (added in 1998, IIRC) in a 2903-9101. Then the others nearby: 2 Gentex SHGs, a Federal Signal 450E in the art class (added in 1996 or 1995, IIRC) and a Wheelock MT in horticulture added in 1998, IIRC.

[@ShawnmauriceJohnson-ug8bn]

damn that was unexpected and scary

[@BlueThunderboltFireAlarm-um4rp]

My work place could use some covers. Literally there are Siemens As's and Spectralert advances that have cracks on them because likely they've been hit once upon a time, so it's either the strobes or the plastic pieces that broke on them. I'm waiting to find a fire alarm that is completely smashed for them to finally come up with the idea to put covers on the alarms. They coulda also used ceiling mounts once upon a time, but nope. They desparetly need covers, though.

[@GaryBeltz]

Does the school have three different panels? The beginning of the video the alarms are in continuous, then the majority of the school is on code-3/temporal, and the area with the true alerts in on a slow match time

[@firemarshallrj9838]

No it’s just one it’s a simplex 4100es

[@Fahrenheit4051]

Each NAC (notification appliance circuit) can be independently coded. Systems like this typically have NAC boosters distributed throughout the building in addition to the NACs in the panel itself. One common setup on older systems is to have a horn circuit that does temporal, and a strobe circuit that outputs a sync pattern (which for older Simplex strobes was just 60 bpm march time). Modern systems can sync both the horns and the strobes using the brand-specific sync protocol (SmartSync, System Sensor sync, Wheelock sync, etc.) When you have horns and non-synchronizable strobes on the same circuit (which appears to be the case here), the best option is to set the circuit (and connected audibles) on continuous so that the strobes flash at the correct rate and the horns don't fall out of sync with each other. Unsynchronized code 3, especially when there's a ton of devices in a single space, is more "noise" than "signal", if that makes sense.

[@burnoutteamclubbtcp7283]

YEAH! CONTINUOUS!!!!!!!!!!! MY FAVORITE CODING!!!!!!!

[@Luke202-z8b]

finally someone who likes continuous like me

[@alexgilbert2]

Truealerts: Slow-MT Horns: Temporal, Continuous Wheelock AS: Temporal

[@damaniwilliams8219]

Wasn't the signal Code Code 3 at first. Why do they keep changing the signal code. Unless they changed the area Fire Codes in your area or Is there a issue with the panel

[@invaluablemoonshine7285]

Omg thats loud, i hope those things werent in most of the classrooms

[@firemarshallrj9838]

OH they are DEFINITELY alarms in the classrooms some of them

[@aidanthetoiletelevatorfire7554]

I like the March time the best, but this continuous seems too loud, I do like the code 3.

[@firemarshallrj9838]

I agree they could’ve kept March time from the start

[@vintagesimplexfirealarmsof6440]

@@firemarshallrj9838 imagine they change it to 120 bpm next drill

[@adamc.3100]

I Think This Alarm Sounds Better On Code 3

[@firemarshallrj9838]

Well some of the horns are still on temporal it’ll be better if it was on 120 beats per minute March time because that was originally Coding it was on

[@RJARRRPCGP]

Uh oh, looks like a failed horn or bad connection @5:08, like one of those 2901-9833s (predecessor to the 2901-9838 and 2901-9846) in one of SimplexTech's videos, with a Simplex 4005, where the tech goes to the lower floor to only see a blinking light. Looks like 2901-9838 if not 2901-9846 in this video. I know that the 2901-9833s were infamous for randomly dying, but even then, a lot of them have been in service for much longer than the few that failed. (I think the 2901-9838s have the same problem, possibly the same with the 2901-9846s)

[@jackslc01]

Spooky but awesome

[@SomeDudeWithAnExitSign]

Do you know if continuous is a bug or it isn't. If it isn't why they did change the coding to continuous but kept some of the building on code 3

[@firemarshallrj9838]

I’m going to try to speak with the engineers on Monday, because literally only the main floor where I’m at. It’s on continuous and everything else is still on temporal and yeah I did her that there was some technical issues with the panel too

[@SomeDudeWithAnExitSign]

@@firemarshallrj9838 I think while at it, get the smart sync module or power supply and set it to code 3

[@Goldenrod636]

Probably already explained this but I was ask for this video: why are some continuous and others code-3?

[@maryjomusovich3596]

I go to tonica grade school they have a simplex system and that song called 3 / continuous

[@vintagesimplexfirealarmsof6440]

i like the continuous more then the t3

[@loren4777]

It gets the attention better

[@Christophe-md1ve]

Fuck 1:33

[@maryjomusovich3596]

I absolutely one-hundred-percent hate continuous I like completely and my panels the new simplex panel it let me think I can have it as a suppression zone or I can have it as a regular fire zone

[@EsmartElectronics]

They can't just pick a coding and stick with it? LOL

[@abandoned2007]

that’s not how it works, the panel recently got replaced like a few months ago which resulted in the coding being messed up

[@LoganMusovich-mw5xm]

Love simplex

[@IntercomEnthusiasts51]

Can you show the speakers in the school

[@Jimmyfive-e2i]

There’s cameras if you do that one more time the police are gonna come to arrest you ok got it

[@auggatronicRoblox_official]

but this is a inspection

[@Jimmyfive-e2i]

Just don’t do it!

[@auggatronicRoblox_official]

@@Jimmyfive-e2i his job is to pull the fire alarm so he has to

[@geoffg8840]

​@@Jimmyfive-e2i it's his job dude. It's a fire drill for this school that he goes to

[@ajsmusic723]

​@@Jimmyfive-e2i are you that dumb its his JOB idiot