3ds Max VRAY 5 Render Setup Tutorial | Settings Explained

[@davidevisentini5370]

Ciao Nikita, good video as always. But for what I know, there are no good points anymore to use irradiance map with vray 5(chaosgroup itself stated it). true that gives less noise and the renderer time itself for the final computation is less. But this can be usefull just if you won't use vray denoiser. If you add the time computation for the irradiance map + the final image time, you will see that with bruteforce, the timing will be almost the same, but with better quality (sometimes for a scene with a lot of refractive/reflective materials it takes more time with IM than BF). IM is not even optimized in vray5. With bruteforce, I just suggest to raise the light cache to 2000 for final image. it won't affect the render time so much, just the light cache computation at the beginning, but gives less noise after.

[@margaritanikita]

Ciao Davide! Agh I've been to Italy many years back and loved it. Good memories..So, as I have mentioned, I know V-Ray only for experience and experimentation, and to be honest when I render with Irradiance map, my renders seem much less noisy compared to Brute Force. But maybe I'm biased because I always used IM. In V-Ray 5 I have switched to Brute Force, and that's what I also suggest to everyone, since I want to use VRayLightMix. Now, whether I set 1K or 2K to Light Cache the result looks the same to my eye! But I trust you, so I'll pin your comment, so that our fellow artists can see and follow your advice.

[@davidevisentini5370]

@@margaritanikita Ciao, I sent you a DM on instagram (here I couldn't have attached pictures, just for that), with an example to show you the difference between 1000 and 2000.

[@margaritanikita]

@@davidevisentini5370 Thank you Davide, I'll check it soon and get back to you.

[@rejinyahel2170]

No iradince map ?? What then ...BF ?

[@rejinyahel2170]

@@margaritanikita do bf make render slow ...

[@MStrawberryChe]

thank you soooo much for this video!! I just couldn't figure out why everything was so light until you showed the hidden lights box in global switches. thank youuu

[@margaritanikita]

Glad I could help!

[@ouasisse]

The Best Explanation !!! I referred to many videos , but out of all tNice tutorials was the best I could find among all .... Also got to know many tNice tutorialngs

[@PierreLouvet]

Hi! Thx for the sum up, one quick thing for people watching : end of the video you say the brute force is "locked" on 3 bounces, if I'm right it is not locked but unused, as it activates only when BF is used as secondary engine. Good day everyone

[@BillyCoopDraws]

Thank you soooo much for your thorough, and cogent explanations, of not only, how a thing should happen, but why it is important it happens the way it does. Anyone can make and convey a list of steps, to achieve a desired outcome, but is it the rare educator indeed, who takes the time to add the special ingredients that truly makes a subject understandable. You dug deeper than just telling us to "click, click, click", and took a well worn subject, I thought I already understood, and made things clear, where there was no clarity, before. Thank you again, for taking the time to care. My best to you, Billy C.

[@margaritanikita]

Thank you so so much for your message. I truly appreciate it!

[@manaryazed8213]

Thank you so much for your amazing tutorials ❤️ you don't just give settings or instructions, you explain even though you don't have to do that. Thank you 🙏

[@margaritanikita]

Thank you so much! Glad you feel that way!

[@michaelsamuelravulakollu9533]

The Best Explained Video I've ever seen ! Thanks alot miss.

[@asilbektursunov6821]

thanks for explain fluently slowly you are very heplful person because until now dont find certain video from youtupe about render setting thanks Alloh bless you thanks very very much

[@MrGalaxyguy]

This is a First Class tutorial ❤ You made is easier than ever... I love you Girl❤

[@margaritanikita]

Glad it was helpful!

[@keyyaaf]

Kudos man. You kept it very simple and helped make the first steps in soft soft. Very Helpfull! Thanks!

[@bharatprajapati5260]

Wow.. Amazing... I don't know what to say... How simple and clear u r the way u explain... Very informative.. Appreciate ur efforts🙏

[@tonyadsan3208]

I watched your video regularly and I am become more professional day by day. I have no words for thanks. You doing a great job. God Bless You.

[@margaritanikita]

So nice of you! I'm really glad to hear that!

[@ingeniousconcepts5330]

The training video was very helpful for me.. The way your teaching Method was good.. Sound and Slang is very interesting... Thanks...

[@ΙωάννηςΚαούνας-θ5ξ]

Very helpfull!!! Απίστευτα τα βίντεο σου!!! Μπράβο συνέχισε μας έχεις βοηθήσει όλους!!

[@margaritanikita]

Σε ευχαριστώ παρά πολύ! ❤️

[@nachobaronetto1625]

you record with hardware outside of the program. Great tutorial btw it was very detailed but still just right for beginners.

[@shiroemusic3792]

Bet your soft is absolutely amazing! Never give up

[@astdesignstudio]

Thanks a lot. Ενα απο τα πιο χρήσιμα βιντεο που εχω δει, ευχαριστώ πολύ.

[@islam6849]

Ayyyy Thanks for helping get to know the Software! I just downloaded it in hopes of making resetupes and originals. Props to you for

[@thomasstapleton6910]

Thank you! This was timely for me, as I needed to understand how to control the quality of my renderings - today. Your presentation was very clear and helpful. Thank you!

[@pasharyan9699]

Thank you sooooooo much mam, you are the best explaner and teacher. I am salman from india, and i would like to thank - you for guide me and improve my skills from your videos. Thank you sooo much again.

[@hernancardenas6499]

the best and most explicit tutorial I have found, thank you very much, greetings from Lima Perú

[@margaritanikita]

You are so welcome!!

[@jahongirmirzoikromovikromo2458]

Margarita, pls make a next tutorial with "Which render type is best? Render with GPU? CPU or both?"

[@mayrontellez]

obsessed with soft design now and more obsessed with cool scales Nd stuff.

[@arneltorres3598]

yours is perfect. These are going to takes loads of ti off the learning process.

[@ahmedimad5051]

thank you your voice is calming

[@margaritanikita]

:) thanks!

[@덕용엄-p7g]

Your video was very helpful, I'm still learning and getting the hang of it still. I'm into House and EDM. I look forward to seeing more of your

[@raghdazaki1555]

Very good render. I tried it and it results a clear scene. Thank you

[@ENITech]

Dear your experience about 3ds max and other 3d software?

[@SadiqKhan-dm3mg]

You are best so sweet and clear♥️, thank you for sharing precious knowledge.

[@margaritanikita]

Wow, thank you :))

[@radwartist]

I can't thank you enough for your videos they're really helpful, stay blessed

[@lunafairy18]

Margarita υπέροχο βιντεο! Σε ευχαριστουμε! Ερωτηση: εχεις ασχοληθει με 3dsmax animation?

[@memyadventures2730]

Amazing video. Which mic do you use? For voice recordings

[@blotar2]

Hi Margarita great video, i think you should have a faster workstation, what do you use ? a laptop

[@VeeVogueTutorials]

This video is super helpful for beginners. thank you!

[@aliayubabbasi]

Hi Margarita.. can I ask a question here?.... so I do manage to fix the noise in the main RGB render.. but in my render elements, specially reflection, lighting and specular elements, I still find noise and not matter what I do, I can't get rid of them. Secondly in this tutorial you used VRay Denoiser element but you didnt change any denoiser settings. is it not needed initially?... Does the denoiser slightly blurs the main RGB render? thanks,

[@Mr.Venueppili]

Which rendering software get good results mam Arnold,vray and corona which one??

[@nemmisato1927]

How much have you improved since that point that you said tNice tutorials ? I’m deciding whether I should buy it or not

[@harshilkorpe911]

which system do you have ? and which system is best for 3ds max and v-ray,corona renderer???

[@mostafaalameddin5518]

Thank You Margarita for your Vray videos

[@subhashlakshmi]

Very good with each item explained very well.

[@sondamvula]

Amazing tutorial, thank you Margarita😊

[@md.rabiulislam5987]

Thank you so much for this. It was Very helpful . wait for next video

[@margaritanikita]

Thank you!!

[@kavyavanam8723]

THANK YOU SO MUCH NIKITA IT HELPS ME SO MUCH

[@chessgm931]

Thanks for the video! Very helpful and easy to follow instructions

[@MariMuthu-pw6tg]

Nikita you are not explain about, basic expert and advance mode? then what about Color mapping settings

[@fayakh]

On 4:43 you said.. "Unhide my lights" .. I loved it 😍.. Your complete video is very informative.. Thanks a lot

[@margaritanikita]

:)))) Thanks!

[@acheronlv-4268]

SICKO ALERT!!!!

[@sentumbwefarouk9247]

hello thank u for the tut. my question is, does vray 5next have vray RT ? AND HOW DO U SET IT THANK U

[@naglaamohamed5806]

Thank you so much for the detailed explanation ❤

[@margaritanikita]

Most welcome!

[@MyUsername-qt5tr]

What a lovely bedroom you have! 🤗

[@margaritanikita]

:)))

[@toukiramir]

Best tutorial ever !! Thankyou so much

[@makhloufanis4564]

thank you ;) it's so usful for me, your explications are so clear and i like it, thank you again

[@margaritanikita]

Happy to hear that!

[@mohammadshehroz9665]

thank you so much to make this Help Video... Very Use Full Video, Amazing Explanation.. Love From Pakistan ♥♥

[@joonykids]

Hi Margarita. Could you do another one on video rendering settings please. Thanks

[@jahongirmirzoikromovikromo2458]

each other, step-by-step. thnx it was very helpful

[@margaritanikita]

Glad it was helpful!

[@RAMrkry]

Thank you so much what else could we ask for, it was in-depth and yet fun and easy to grasp and understand.

[@margaritanikita]

Glad you enjoyed it!

[@archguru685]

This is really amazing tutorial, easy to understand as well, thank you for making such tutorials.

[@margaritanikita]

Thank you so much!

[@xaam.9076]

iam happy that i understand so basics

[@vaishnavipatil3199]

Very useful ma'am 🙂.. but in my vray there is no bucket option .. I have adaptive & adaptive subdivision so can u suggest which one I have to use ... Ma'am can u make tutorial on vray lights in detail..

[@mhentertainment1661]

Thank you so much. It was a very helpful video for me.

[@idcconsultants3414]

superb and satisfactory tutorials and thanks alot for tutorials.

[@hardivegad6563]

Hey your videos are very helpful to understand every single tool ....can you please make a video on how to upgrade to vray 5....

[@TheDigiVault]

Margarita, thank you for this!!!! Very very helpful

[@rodrigobutron1983]

Thank you very much for the Tutorial it helped me a lot. Greetings from Mexico!

[@3rk0o]

You’re amazing! I can’t believe how much I learned from tNice tutorials video. My softs just got 10 tis better after watcNice tutorialng tNice tutorials!

[@BlessedBrown100]

Thank you so much, please make more tutorials like tNice tutorials. You explain better than any other guide I've seen on youtube, very clear and

[@spodesignsng6158]

Good one there. Please where do you get your objects from?

[@biletskyi_]

Thanks Margarite!👍 Love your voice!😊

[@derrickarbiol6611]

Hello Nikita, I was wondering if you can make a video on Vray Rt vs Vray Adv. as a final rendering? Because there is some thread that says Rt is better in getting a photorealistic image.

[@mlbbku2043]

thank you ma'am for the knowledge about Vray🙏

[@margaritanikita]

You’re most welcome!

[@sajaselawi5056]

Thank you so much !!! U helped me alot finally found someone can explain it right ! ♥️♥️♥️♥️

[@margaritanikita]

Thank you! I'm so glad to hear that!

[@nikolapuszkova215]

Great tutorial! Super easy to understand!

[@雪辉-b8v]

hi margarite ..i need help i cant found any solution on my problem, when i using batch render, my vray denoiser and lens effect either one or both will not appear when batch render..

[@amishsatra4727]

Amazing video , thankyou so much ❤️

[@samiramahmudlu9138]

Hello,Nikita! I use Vray 5 too. But in render setup V-ray ,GI is emphty. What could be the reason? Pls help. Thanks :)

[@yasminnasser3260]

U r perfect 👍🏻 it’s very short and useful ♥️

[@margaritanikita]

Thank you 😊

[@pranitajain5589]

Hi, Pls solve my problem I am using max 2015 and v-ray 3.4. prospective viewport become black when i am applying camera and v-ray sun. nothing to visible. how to it??

[@restonedeniola9293]

Hi Nikita, could you share the scene? there are some good points from this video tutorial. Thank you.

[@ArchitectVirendraChhatria]

Nikita.. please make videos on exterior rendering

[@am_Visualizer]

Nice Tutorial in detail.

[@azeemplans179yt8]

many many thanks for very informative video. and what about beginner to pro video is it in process?

[@sravansravan8548]

Nice explaination..mam..thanq u...keep on such imp vedios..thanq..

[@margaritanikita]

Most welcome 😊

[@Jumtoriba789]

thankyou so much mam for explaining it very very clearly.......please make a video explaining v ray lights detailly its adjustments and all thanks love from india

[@margaritanikita]

Thank you! I already have a video on artificial lighting explaining all types of vray lights

[@DungPham-vs8nt]

What type of image filter do you use for this? Many thank!

[@Natalia-bt7ue]

Hi Nikita! I’ve been trying to save the final image but when is done it come out really dark in comparison with the viewport. I’ve arrange all the gammas. Don’t know if now I need up. Please help 🤍

[@ahmed2ahmed228]

Super well explained.

[@asmaafifah1262]

Honestly, a very useful tutorial to break the ice going into tNice tutorials software

[@Somplay.]

Thanks mam it was very helpful Could you plz make video on exterior render too

[@ramibaghdadi7432]

Thank you so much :* can you please make video for Vray 5 Gpu render settings

[@margaritanikita]

Thanks! I haven't used VRay GPU, but I'll do my research and get back to you!

[@youAreAHappyPerson]

Voice is good and smart work

[@did3d523]

what is the shortcut key for "Force color CLamping" please??

[@med_dh203]

thx a lot u save me ♥ ur explanation very clean smooth and in point without any noises hahaha

[@margaritanikita]

Glad to hear that!

[@abhijithus7804]

Thanks, the video was very informative. Looking forward for more informative contents about this vray setting.

[@margaritanikita]

Glad it was helpful! More to come!

[@momufx1]

Thank you once again for your updated render tutorial

[@margaritanikita]

My pleasure!

[@Tariqkhan-kw6qf]

@@margaritanikita thank my sweet you very clear teaching

[@eliazahobiri8009]

The DISPLAY CORRECTION under the Layer panel in my Vray Frame Buffer is not showing, Please help me fix this. Thank you.

[@ndleland]

We stan a designer queen 😩👑 ✨

[@margaritanikita]

:))

[@sergioalvarez8850]

Many thanks!!! Simple, clear and precise. Greet you from mdq

[@margaritanikita]

You are welcome!

[@noodlee2696]

Γεια σου Μαργαριτα! το λευκό φόντο στο περιβάλλον τι ειναι?

[@zozulya2]

1:43 Setting V-Ray as default renderer 12:02 Time and Noice Settings 15:43 Test and Final Render Settings

[@yasiin_miim]

Great tutorial, thanks a lot!

[@mauriciovalercampos6916]

Ima get the 0 dollar one is it rlly good or nah?