What Makes Red Sea’s NanoMat So Awesome?

[@cegentry]

Looks like with the increased water cleanliness you are getting excellent coloration/growth in your aquarium behind you. Keep up the good work!

[@BulkReefSupply]

It's crazy what proper mechanical filtration will do for a reef tank! ;)

[@philsowers]

Very kind they didn't name the "other" fleece roller's difficult load & unload process, but I will. It's the KLIR filter roller. AS it's working it's great, but loading and unloading is a nightmare, and the occasional roll run-out that wastes a whole roll from time to time.

[@bacondreams]

Would it fit into an innovative marine nuvo fusion 25 gal. Lagoon?

[@JeepinReefer406]

I'm 4 days into using this in place of filter sock and floss in my Red Sea Reefer 170. From what I can see this Roll is going to last me forever.

[@Nifilheimur]

How quiet is it? Is there any water noise in it?

[@MrNic00w]

No noise, it only turns on when it's dirty which is prob every 2 days in my case

[@ThomasBReef]

I set it up here in the Max Nano XL, and it is dead silent in terms of water noise. Literally none! The motor makes a typical motor sound when it kicks on, but it's brief and infrequent.

[@Nifilheimur]

@@ThomasBReef Sounds promising. Have my tank near the bedroom and my girlfriend can hear a mouse fart one town away so noisy aquarium equipment means lots of nagging. Fed up with filter socks so think this will be the next equipment buy👍

[@ThomasBReef]

@@Nifilheimur hahahaha 😆

[@Pagodacoralsllc]

I absolutely love mine it’s worth the money. I’m running a bare bottom reef on the nano max G2 and it’s absolutely a work horse. Only con is it doesn’t run on the reef beat app . I wish it did it would have been a 10/10 if it did . I give it a 7/10

[@dbkarmann1]

my high water sensor wont go off and im running the reef ato in my max nano g2 with the nanomat. did you have a problem with that?

[@Pagodacoralsllc]

@@dbkarmann1 at first I did have a issue with it until I flipped the level sensor and it works flawlessly now.

[@dbkarmann1]

@@Pagodacoralsllc yeah i thought maybe that was it with mine but it has grooves and wont go in upside down on mine.

[@Pagodacoralsllc]

@@dbkarmann1 I would contact support they have good customer service

[@BulkReefSupply]

The Reef Beat app would be a nice addition!

[@lovermansmith9082]

Cool . 😊

[@asrg4893]

I have had mine since it was first released in the UK (end Oct start Nov) and honestly it has been a complete pain in the back side, don't get me wrong I fully imagine without the ATO+ it's probably great but the pair of them together, it just isn't worth the constant fighting with the water levels and the loud running water sound that it gives off, and I mean loud! It makes me need to pee whenever I stand in the living room... If it didn't cost so much I would have chucked it in the bin or given it away by now

[@BeijingHanken]

Do you need PCB or PCB assembly service?

[@MagicFamily2000]

Replacement after 2 to 4 weeks??? I'll just stick to my old dirty sock :) !

[@Hartwig870]

Yeah, not basing my export methods around expensive consumables. Filter socks changed out as regularly as I can otherwise just let it all rot and use the huge refugium I'd normally have regardless.

[@mikeswehla2709]

Im running a IM RFS39 sump on an IM100g Ext Tank. Unfortunately there arent any good Rollers for this sump besides the Klir. Any issues running this past the 250gph rate?

[@michaelcoffey2314]

Does this work in a IM 20l fusion?

[@BulkReefSupply]

Unfortunately, The NanoMat is too large to fit that particular tank. That being said, IM does make a manual fleece roller that do fit the dimensions of their tanks!

[@Blonschi]

Is there any way you can cut out the roud hole of the sock filter in the NANO MAX G1 to put it in? so can you use it somehow on the first version of the NANO MAX? Anyone did it and how did you do it? Thank you for the replies.

[@ronwest8566]

I did that and I’m not totally happy with it. Too much bypass and I’m not sure it’s worth doing it.

[@Cobb83SnipeZ]

Will this fit a MAX NANO G1

[@BulkReefSupply]

Unfortunately, this product is not compatible with their Max Nano G1.

[@harlemgecko9545]

Any 3d printers on here that could make a custom gasket