How To Remove a Olive, Five Different Ways To Remove a Old Olive Off a Pipe.

I will show you 4 ways I recommend to remove olives from pipes, plus 1 other method which I do not recommend so much.
I remove 15mm, 22mm and 28mm Copper and Brass olives using different tools and techniques.
So you can carry out you job with less stress.
I really appreciate your support and a cup of coffee goes along way. Helping me to make more videos to help you
Any donation in my “TOOL BOX FUND” is amazing and really appreciated
www.paypal.com/donate/?cmd=_s...
Please click "THUMBS UP" and "SUBSCRIBE". Click on the "BELL" if you would like a notification next time I upload a new help Video
"SHARE" me with your friends
Find MORE HELP on my Web Site, where all my videos are categorised to make them easy to find.
With links to products and parts I recommend
www.markballard-ltd.com
You can leave a message in the comments, your feed back is always appreciated. Thank You
“As an Amazon Associate I earn from qualifying purchases”.
Chapters
0:00 How to remove an olive, Introduction.
1:09 How to remove an olive using plyers.
5:39 How to remove an olive use junior hack saw and screw driver.
8:27 How to remove an olive with an olive puller.
10:16 How to remove an olive with olive cutter.
11:11 How to remove an olive with a adjustable spanner and a hammer.
Links to my help videos.
VIDEO: Review "Monument 15mm Olive Removing Tool".
• Review, "Monument Oliv...
Shopping LINK: Monument 15mm & 22mm Olive Removing Tool
www.markballard-ltd.com/recomm...
VIDEO: Review "Monument 15mm Olive Cutting Tool".
• Review "Monument Olive...
Shopping LINK: Monument 15mm Olive Cutting Tool.
www.markballard-ltd.com/recomm...
Shopping LINK: Monument 22mm Olive Cutting Tool.
www.markballard-ltd.com/recomm...
VIDEO: How to use Compression Fittings.
Coming Soon.
VIDEO: How to replace a leaking radiator valve. With out draining the system: Part 1.
• Replace Radiator Valve...
VIDEO: How to Fit Radiator Valves & How NOT to Fit a Radiator Valve. Fixing Leaking Radiator Valves.
• How to Fit Radiator Va...
VIDEO: How to Replace a Radiator with Out Draining the System.
• How to Replace a Radia...
VIDEO: How and Why you should add "INHIBITOR" to your heating system. Including "System Cleaner" and other "Chemicals"..
• How and Why You Should...
VIDEO: How to Fix a Radiator NOT Getting Hot! Thermostatic Valve Stuck.
• How to Fix Cold Radiat...
VIDEO: How to flush Out a Radiator. The Best Way, Getting the Best Results
• How to flush Out a Rad...
VIDEO: How to Balance your Heating System to make it more efficient. Which will REDUCE YOUR GAS BILL.
• How to Balance Your He...
VIDEO: How to Install the Hive Thermostat Mini Smart Active Heating
• How to Install the Hiv...
VIDEO: How to Operate your Traditional Heating System most efficient Setting
• How to use Your Centra...
VIDEO: How to Get a Radiator working and Hot Again, Everything I would do.
• Everything You Can Do ...
VIDEO: Radiator NOT GETTING HOT Because of Blockage in the Pipework.
• Radiator NOT GETTING H...
VIDEO: How to refit a radiator after decorating..
• How to Refit a Radiato...
VIDEO: How to Operate Honeywell T3R Programmer
• How to USE, Program & ...
VIDEO: How to Install and add Inhibitor, Magna Clean Professional 2
• MagnaClean Professiona...
Video: Easiest way to Add Inhibitor into a Vaillant Filter or Spirotech filter or Any Filter with a 3/4 Drain Point
• How to Add Inhibitor I...
VIDEO: How to Fix Vaillant ecoTEC Plus F.22 / 0.0bar Safety switch off low water pressure.
• How to Fix Vaillant ec...
VIDEO: How to Fix F75 on a Vaillant & Glow-Worm Boiler, Plus Why Your Boiler is Tripping Out with F75
• How to Fix F75 on a V...
VIDEO: How to clean Vaillant Filter Version 2. Vaillant Protection Kit.
• How to Clean Vaillant ...
VIDEO: How to clean Vaillant Filter Version 1. Vaillant Protection Kit.
• How to Clean Vaillant ...
VIDEO: How to clean the Magna Clean Professional 1
• How to Clean the Adey ...
VIDEO: How to Operate Honeywell T3R Programmer
• How to USE, Program & ...
VIDEO: Is your boiler continuously losing pressure. What's the problem.
• Boiler Keeps Losing Pr...
VIDEO: 10 Money Saving Heating Tips. Simple Things You Can Do Which Will Improve Efficacy Save Gas / Money.
• How to Reduce Your Gas...
Recommended Tools.
VIDEO: Einhell Classic TC VC1930S Wet & Dry Vacuum Review, 30L 1500watt.
• Einhell Classic TC VC1...
Shopping (Amazon): Water Vacuum. I use this vacuum daily. Highly Recommended. www.markballard-ltd.com/recomm...
The Gas Safe Register.
www.gassaferegister.co.uk

[@titantitan3030]

It is the first time that I have seen something very useful and well explained about plumbing, the kind that no one has ever said anything about and something so simple, thank you Mark Ballard, for giving us that great experience.

[@johndelper1404]

Had a cracked nut behind the olive ring very close to the wall, slid a flat screwdriver into the crack and broke it in half, then I followed your instructions... worked like a champ, Thank You.

[@charlesmiller5606]

Wonderful, clear, useful examples. Cheers, Mark!

[@dld4045]

Mark, Enjoyed the video. The only suggestion I might have is to clean the bitter end of the pipe or tubing and add a drop or two of penetrating oil prior to beginning!

[@MrToneroyal]

Lol in America we call the olive a compression ring. Good video. Thanks

[@ben.tanner]

Aka ferrule

[@nomad9296]

Some good methods, I used a dremel with a small cutting wheel when I replaced 8mm TCV on my radiators 👍

[@akdenyer]

I have done dozens and usually use a file I find the control better than a Junior hack saw. But the other tools look great.

[@leighjones5551]

You are a live saver changing a motorised zone valve 22mm and you pipe grip and wiggle worked a treat . 👍

[@kukladbob1]

Very helpful! Much better than the local council 😢😂

[@philipwalker2522]

Thank you Mark, what a beautifully explanatory video. Watching this video was like being shown something by your dad for the first time, but with the relaxed confidence of a true professional. It was an absolute pleasure to watch and learn about something I didn't know anything about, but in a way that didn't make assumptions about prior knowledge.

[@michaelbooz]

Very Helpful! I was gonna try the last method you showed. After watching I see why that would have been a bad idea and could have damaged the joint behind it.

[@gordonizatt1775]

Brilliant video, very well explained and clear demonstrations, thank you

[@donbailey6600]

Tool is worth every penny. Just buy it and be done.

[@simonmiddleton4977]

Thanks Mark, really helpful info 👍😃

[@smokeyrobinson4918]

Thanks Mark, great info!

[@aschmidt570]

THANK YOU

[@cymplecy]

The simple 1st method worked for me - thank you :)

[@hrhbucket4268]

Thanks, really useful. I like the first method with the pliers. I'll try that in future. Historically, I have generally used the hacksaw method.

[@ilovecds9606]

Thanks for advice the olive removal tool was great because I didn't have enough access to move the nut away from the olive.

[@jimmoline329]

Thank you! I appreciate your videos

[@pf824]

Very useful, thanks

[@NAB001]

Thank you!!!

[@chriswithall2518]

Experiance counts for a lot. Thank you from just a diyer.

[@dande19]

Excellent video! Subscribed

[@EscobarMX3229]

Great video sir!

[@prevaleren]

Dear Mark, Thank you for the clear instructions. I’ll be just sawing of my pipe though, because I think the pipe is too damaged. Save myself the trouble. I do appreciate your video!! Thanks.

[@davelinkson1]

Very helpful, thanks Having a problem getting a brass olive off even with a remover, as I don't do it often I may have made the wrong approach, looks like I may have to cut it off.. Damn!

[@garvielloken3929]

Awesome!Subbed!

[@lololine]

This is a great video!!!

[@traceyhoad5429]

Fantastic.

[@ww4407]

Hi. Do you have the link to your video on how to seal the olive to a damaged pipe that you mention in this video please.

[@MindBoggling01]

I was hoping to find this video as well.

[@Palessan69]

great stuff

[@pauldecham6036]

Thank you!

[@mikepanchaud1]

I've used a mini Dremel style drill with a 1 inch circular saw blade. Obviously taking great care to not damage the pipe. Useful if pipe is very close to the wall and hard to get at.

[@dld4045]

Moisture and electricity do not mix well. Otherwise, a last resort if needed.

[@matt49125]

I need to change some radiators with 8mm inlets...decided to invest in an 8mm olive cutter. Not cheap but zero stress

[@aljones4719]

Works a treat to remove AN olive.

[@mehere3013]

Good video , I'm about to fix water pipes on my boiler that blew of it during ice weather and it flooded boiler casing

[@larrygk1257]

With a lot of care especially because the pipe is usually in a tight hard to get to area with a hacksaw I used a Dremel tool at low speed with metal cutter. Again....slow and careful. And faster.

[@frankrui9169]

Thank you

[@brahim21261]

You have the link please for buying. Thank you

[@oneclick1066]

Awesome! 👌Subbed!

[@kib2675]

when the olive is compressed, I use a rawl bolt inside to expand it and the pipe. When done and the bolt is out, then they are easy on the plier.

[@MrBlue-ws5in]

Brass or copper? What's the best to use for compression fitting? Any difference and if so why?

[@olheghtt]

I can't find the video where you say you can put an olive over a squeezed copper pipe, replacing leaky valves for a sick neighbor in about 4 hours hennas really hoping to have that knowledge just in case.

[@MrToneroyal]

Where is the link for the "olive" removal tool?

[@Esuper1]

We call it compression sleeve here in the States. Love calling it an olive tho.

[@truthwillout7909]

Great video Mark, cheers.

[@vicmartin7735]

Interesting, thanks. I don't see the link referred to when replacing the olive on a damaged pipe. (at 8:20)

[@duckflynn3849]

using the tool at 8:27 it straitens the pipe and removes the brass Farrule (not an olive an olive is food a farrule is a part of a compression fitting he is calling an olive) all in one shot. but then again im in America we call a buggy a cart a bonnet a hood a lolly a tractor trailer , semi, or a truck also spotted dick means you have a std not a can of food.

[@123croydon]

I am not a plumber but I am pretty sure I've seen somebody using a tinsnip. Wanna try that?

[@johnnichols2710]

If you don’t have a specialty tool for this, use vise grips and work it off. Be careful not to grab it too tight and deform the pipe

[@FirstNameLastName-okayyoutube]

So how does one remove 30 feet of pipe and get it into the vice?

[@FirstNameLastName-okayyoutube]

Figured out how to solder vertically by practicing on a vice, so feeling pretty Unstoppable at the moment

[@GarretKrampe]

wood chisel and give it a pop axially and then the other way making a cross. then pliers and heat if necessary

[@douglasedward4041]

Olive - noun. a small bitter green or black fruit that is eaten or used to produce oil, or a Mediterranean tree on which this fruit grows.

[@Jorvik-The-Poor]

What about plastic 10mm pipes?

[@timothybloomer8287]

I was just wondering if a 10mm olive is harder to remove?

[@MarkBallardLTD]

8 and 10mm pipe very soft. Probably squashed pipe. But same method

[@jeepien]

I wish I knew what an olive was. Must be a Brit term. Okay watched the vid. Now I know. Thanx.

[@psilocybemusashi]

Does anyone have any luck using the old stop valve stuffed with a few washers?

[@antoniogalluccio4213]

You forgot to mention the olive splitter made by dickie dyer and rottemberger

[@eddierae8945]

Sealing a new olive if pipe has been crushed@8.15. where is your video on compression to explain this

[@geeache1891]

There are many video' s on youtube on learning English. Most of them go beyond adding a 'n' to an 'a' before a word starting with vowel. Never heard that olive is an exception though.

[@WalkersCastle]

Are there similar video 's about the correct use of the apostrophe and space character?

[@geeache1891]

@@WalkersCastle 😄 I'd better not make such video!

[@satstube]

Sometimes adding standard flux to your first methods helps just side off

[@mehere3013]

video "how to use compression fittings , coming soon" WHEN

[@peterroles6130]

How to remove "AN" olive!

[@Sash_Window]

There is another way.

[@olheghtt]

The best way to remove an olive is with a toothpick..... "Shaken, not stirred"

[@MJ-qm7ke]

An olive….

[@grahampalmer]

Yes it's "an olive". Don't you just hate poor english.

[@dumdiversaspapalbull1452]

Ferrel

[@MrSnookerballs]

How To Remove a Olive, do you mean AN OLIVE

[@edmundlawther1037]

bullshit olive remover tool purchased one wont fit in pipe cut with pipe slice because of burrs wasted my money

[@lynnshev3404]

you couldn't clean off the burrs?

[@steveolive9991]

1. What you Brits call an Olive, we Yanks call a ferrule or compression ring. 2. Should be "an" olive, not "a" olive. I hope your mechanical experience is better than your grammar.

[@jennitsu12]

Olive? Es aceitunas 🫒