MarketPlace Ruckus More Mods

[@nordland2235]

Do you have a ruckus filter air box...with the coil hose that goes on the back of the carb....my coil hose got holes and tears....the jets keep filling with dirt?

[@dabradguy]

I want to see this thing go 50 with stock exhaust!

[@wardified8566]

I want the same as this is where I am at with my own ruck

[@SmallEngineVelocity]

I am getting close (The video is in production on the next stage).

[@LuisCastillo-sd7ns]

Day 1 of asking to small engine velocity to work on my Ruckus

[@SmallEngineVelocity]

Where are you at? Approx. location

[@king0dasouf]

I’ll help!!!

[@enjaymarine]

One VERY IMPORTANT observation, from 06:50 in your video, where you are describing seat hinge removal - and you describe the fasteners as Phillips screws... This is a Honda. It is Japanese. Therefore - and by definition, ALL cross-head type fasteners are NOT Phillips - they are J.I.S. (Japanese Industry Standard). This is a small pont - but can be critical, as you CAN and indeed SHOULD use a JIS screwdriver / bit (available everywhere from Vessel on Amazon, eBay and other online vendors) on JIS fasteners - which are identified as such by the small "dimple" between two of the radiating "cross slots" in each fastener head. BUT... You should NOT use a Phillips #2 driver on a jIS fastener - or "cam-out" and subsequent damage to the fastener can ensue. Here endeth the lesson...!

[@SmallEngineVelocity]

Your right, and I have seen many people strip the screws not using the right one. I admit so have I.