we are sawing some oak 6x6 s to set the bandmill on , these logs may be the last logs we saw in 2019. "hope you enjoy"
Пікірлер: 137
@shawnbliss4 жыл бұрын
I enjoy your videos I live in Wisconsin and worked at a few mills when I was younger I will always have sawdust in my veins I love the whole sawmill experience keep up the great work and also like your green laser
@williamellis89933 жыл бұрын
I had to watch this one since it was before I subbed your channel, Mark. It's amazing the progress you've made in less than two years. Bill
@kennydean45124 жыл бұрын
Mark I wish I lived closer so I could come and help you and Eddie at the mill Eddie seems to be a man of very few words,but I know he is a hard invaluable worker, love your videos, love the sound of a sharp blade cutting through logs and also the aroma of fresh cut lumber You and Eddie and your families have a very Merry Christmas and a prosperous new year, Oh by the way, I think you stated before, but will you be adding heat to the building when you are operating the mill?
@markgalicic77884 жыл бұрын
yes sir Kenny would love the help thanks , Merry Christmas.
@koolaskoalas4 жыл бұрын
Really appreciated seeing all 3 posts being produced , My Dad and I could watch ya all day every day , logs sawdust and lumber way better than watchin tv. All the best to ya's for the holidays
@markgalicic77884 жыл бұрын
thanks & Merry Christmas.
@jimamccracken57832 жыл бұрын
I like the remark about touch screen mills. That is so true skilled men do not need touch screens. And I don't see any half-dressed women running around showing their booties either. Just needed to say that Mark and Eddie all the best to ya both.
@dennisworkmansr.7142 жыл бұрын
I just happened to come across this video from 2 years ago that was about the time i started watching your videos, what a difference 2 years has made
@kingdomofspeed83904 жыл бұрын
Fascinating to watch both Mark and Eddie working the mill and the building construction. Watching from the AZ desert. Thank you for the channel.
@markgalicic77884 жыл бұрын
thanks for watching.
@bobwoodhams72424 жыл бұрын
I would forget the tapper to.... it happens...lol
@markgalicic77884 жыл бұрын
yes its very easy to forget Bob , lucky this was a junk log.
@jagdishprasadkhaitan4815 Жыл бұрын
Lovely superb Nice sawing
@ronmack17674 жыл бұрын
Enjoyed the video Mark. Thanks for taking the time to produce the videos. I wish y'all a blessed Christmas from North Carolina. Y'all take care and God bless.
@markgalicic77884 жыл бұрын
thanks Ron & Merry Christmas.
@dannyfoshee22924 жыл бұрын
your voice and the buzz of the saw caused me to lay my head on my desk and take a nap.lol.
@williamjohn84044 жыл бұрын
Great to see the larger picture,makes your show even better.Thanks for your time boys.Kind regards from U K.
@markgalicic77884 жыл бұрын
thanks , we just changed the editing program .
@santaob24394 жыл бұрын
Well, yawll have come a long way since last December. To you and Eddie and your families and crew, a Merry Xmas and a Happy New Year.🎆🎊
@markgalicic77884 жыл бұрын
thanks Santa , Merry Christmas .
@SUROBLEDEKchannel3 жыл бұрын
Mantab👍👍o
@craigevery8382 жыл бұрын
I love these older videos because I can see the saw dust chute.
@jeanbaptisteyoumbessie26322 жыл бұрын
Bonjour Madame ou Monsieur svp quel est la valeur tendu à Douala au Cameroun avec son installation complète
@jbbrown79072 жыл бұрын
So much better! We can watch the sawdust.
@melshea2276 Жыл бұрын
91,511 th!….so close to first!😊
@rcknross11 ай бұрын
glad to see eddie has quit smoking
@daleolson72054 жыл бұрын
I could sit here and watch you turn round things into square things all day! Have a Merry Christmas!
@markgalicic77884 жыл бұрын
thanks Dale & Merry Christmas!
@michellehoefer59224 жыл бұрын
Thank you for the video.Like the way Eddie flips the board over-''Slab it or keep it?''
@markgalicic77884 жыл бұрын
thanks Michelle & Merry Christmas.
@SandBoxJohn4 жыл бұрын
I don't care what what you say, every log cut on that saw is a beautiful log.
@markgalicic77884 жыл бұрын
thanks John & Merry Christmas
@Rene-fh3eu4 жыл бұрын
Hi Mark. I am not questioning your carpenter skills, you are competent. By cons, for sawing logs, you do not do it properly. You put your ball wrong and you waste a lot. Use your turner in the middle of the ball, it will be much better. Above all, place your ball with the banana (the curved part) at the top, you will see the difference. Otherwise, I love your videos, they are great, I enjoy it. well done
@markgalicic77884 жыл бұрын
thanks.
@Kmecha844 жыл бұрын
Good job on the sawing and I like what you've done with the camera, is it on a stand cause it does a good job. The view looking at the blade could be tweaked to the right a bit but great job!
@markgalicic77884 жыл бұрын
thanks.
@harryellingsworth83024 жыл бұрын
Merry Christmas Mark and Eddie, keep on sawing, next year.
@markgalicic77884 жыл бұрын
thanks Harry & Merry Christmas.
@fricknjeep4 жыл бұрын
hi there MERRY CHRISTMAS to all and to all a good everything john
@markgalicic77884 жыл бұрын
thanks John & Merry Christmas.
@mlt63224 жыл бұрын
Just curious, what do you do with the smaller scraps too small to make boards out of? We have a pallet repair shop a few miles from my house and they make a killing converting their scraps into wood pellets for wood stoves and selling them at local hardware outlets.
@markgalicic77884 жыл бұрын
we make firewood.
@craigwillenborg18314 жыл бұрын
From the sound of the headrig you did a great job aligning the mill.
@markgalicic77884 жыл бұрын
yes Craig it took some time to dial it in but I do have some track issues to fix . thanks for watching .
@jimg25534 жыл бұрын
Looking great Mark. Merry Christmas to you and the World.
@markgalicic77884 жыл бұрын
thanks Jim & Merry Christmas.
@jvt2013 жыл бұрын
Inn last three logs you are making more firewood than timber? Are these three logs free?
@markgalicic77883 жыл бұрын
you are a better sawyer than me Jay.
@brentking-gmailking25704 жыл бұрын
Good Video..... Thanks for sharing. Can't wait to watch you progress on the shed. Please make the videos as long as possible. Have a Merry Christmas.
@markgalicic77884 жыл бұрын
thanks Brent & merry Christmas.
@jgalicic4 жыл бұрын
Good job on the video editing Brother ! Looks great !
@markgalicic77884 жыл бұрын
thanks brother , lots to learn !
@bunkhindman32413 жыл бұрын
Just asking why are the big ends removed with a chainsaw instead of running the saw todo it?
@markgalicic77883 жыл бұрын
easyer.
@wyrtwister42604 жыл бұрын
The bus motor seems to start pretty well . :-) Wyr God bless
@leonardfox51883 жыл бұрын
I dont mean to be offtopic but does anybody know of a trick to log back into an instagram account..? I was stupid lost my password. I would love any tricks you can offer me.
@augustrodrigo61773 жыл бұрын
@Leonard Fox instablaster ;)
@leonardfox51883 жыл бұрын
@August Rodrigo thanks so much for your reply. I got to the site on google and im in the hacking process atm. Looks like it's gonna take quite some time so I will get back to you later with my results.
@leonardfox51883 жыл бұрын
@August Rodrigo It worked and I now got access to my account again. I'm so happy! Thank you so much, you saved my ass :D
@augustrodrigo61773 жыл бұрын
@Leonard Fox glad I could help :)
@IronOakSawmill4 жыл бұрын
Been there before. Forgot to reset the taper set, and messed a few up.
@markgalicic77884 жыл бұрын
I think we all did that.
@douglasbranham60993 жыл бұрын
How do I get my 1965 Alaska plate to you?
@markgalicic77883 жыл бұрын
email me at markgalicic@verizon.net.
@bunkhindman32413 жыл бұрын
Should be are not removed?
@markgalicic77883 жыл бұрын
yes sir.
@money87133 жыл бұрын
💪💪💪
@markcook79073 жыл бұрын
33³
@peggyking14664 жыл бұрын
.
@horsebranchsawmill824 жыл бұрын
What engine do ya have on the blower?
@davidwatsonii94694 жыл бұрын
MERRY CHRISTMAS AND HAVE A HAPPY NEW YEAR, HOPE NEXT YEAR IS GOOD ONE FOR YALL
@markgalicic77884 жыл бұрын
thanks David & Merry Christmas .
@fatal-sf7rh4 жыл бұрын
What type of spf is that
@markgalicic77884 жыл бұрын
red oak & pin oak
@Z-Bart4 жыл бұрын
Mark, i had a thought. Have an index card in the cab with a big T on it. If you run taper the T is up. Taper out, T card turned to blank card. I'm an idea guy. 👍
@markgalicic77884 жыл бұрын
thanks Ray , I want to install a light in the cab to tell me a tapper is out.
@joemc1114 жыл бұрын
First time on your channel,you know I think I am a youtube junky at about 5 to 6 hours a day. I’d come up there and help you but I’m allergic to that white stuff merry Christmas
@markgalicic77884 жыл бұрын
thanks & Merry Christmas.
@themole19444 жыл бұрын
Once again happy christmas toboth of you and your family,once again a speaking part for Eddie (Lumber relocation engineer) Champagne fellas the best.
@markgalicic77884 жыл бұрын
thanks John & Merry Christmas.
@bobsanders23534 жыл бұрын
To you Mark and Eddie the Very Best to you and yours in the New Year. Really enjoy your videos. Bob in Desbarats. Ontario
@markgalicic77884 жыл бұрын
thanks Bob & Happy new year.
@trailrider01944 жыл бұрын
I've made that same mistake with the taper rollers on my Woodmizer. It's easy to forget what you did on the last cut when your mind is on the next one. I don't know why you said that last log was ugly. It wasn't ugly just had a lot of character.
@markgalicic77884 жыл бұрын
yes it is , I need a light to come on when a taper is out .
@silverknight10444 жыл бұрын
What you need next after the building is done is a conveyor to take the junk stuff to a wood chipper.
@markgalicic77884 жыл бұрын
we cut the slabs up for firewood "good free heat "
@slhasebroock4 жыл бұрын
Merry Christmas and Happy New Year! Enjoy your channel!
@markgalicic77884 жыл бұрын
thanks Steve & Merry Christmas
@lewiemcneely91434 жыл бұрын
Thanks, Mark and I was worrying hard about that taper but knew if you caught it and had 6 or better on the thin end you could fix it, and you did! Good looking lumber, excellent running bus motor, always up to the task THE Eddie Horvath, marvelous sawyer and if anyone is aggravating you about going faster or whatever, just tell them you're not cutting production, you're cutting PreCISION! And things get goofy when the timber is froze solid. Saws can do all matters of strange things. Best to do like you did and go slow and easy. Getting done with no holes in the roof and no blood and hair on the floor is the order of the day. Yall got my vote and have a MERRY time on wednesday! GBWYall and we're ALL blessed out the kazoo!
@markgalicic77884 жыл бұрын
hey lewie hope all is good ,will be working on the building this week . hope to get the bus motor out of the weather soon . "merry Christmas "!
@lewiemcneely91434 жыл бұрын
@@markgalicic7788 Thanks, Mark and yall stay as warm as you can and the bus motor will be eternally grateful and Merry Merry to Yall as well!
@davetartler85464 жыл бұрын
Some nice weather coming up for ya Mark. Another great video.
@markgalicic77884 жыл бұрын
thanks Dave & Merry Christmas.
@crownvicky4 жыл бұрын
Do you have much trouble with rocks in or on the logs?
@markgalicic77884 жыл бұрын
no just metal.
@dave-in-nj93934 жыл бұрын
that band saw looks like a Star Wars Imperial Walker.
@markgalicic77884 жыл бұрын
we are from Imperial Dave.
@allenlaidacker4 жыл бұрын
Hope everything goes well for you in 2020
@markgalicic77884 жыл бұрын
thanks Allen & Merry Christmas.
@paulacton-phillips55604 жыл бұрын
I follow your videos with great interest from Jersey (the old Jersey) where we have no timber industry. I would love to see how you chaps deal with the offcuts to make useful products.
@markgalicic77884 жыл бұрын
this wood went into the sawmill building
@paulacton-phillips55604 жыл бұрын
Many thanks for your swift reply. Its marvellous that there you are somewhere in the US, and I can sit on my little island watching you at work.
@kennethtibbitts66414 жыл бұрын
MERRY X-MAS TO MARK YOUR FAMILY ND CREW!
@markgalicic77884 жыл бұрын
thanks Kenneth & Merry Christmas.
@allenlaidacker4 жыл бұрын
Great job wish i was there to help. Weather is good in NC
@markgalicic77884 жыл бұрын
we are in a warm pattern 52 for a high today.
@141poolplayer4 жыл бұрын
Merry Christmas fellas. This was in my recommendations today so I watched it and was wondering what state you guys are in. I'm guessing NE OH or NW PA. Looks like where I live.
@markgalicic77884 жыл бұрын
thanks & Merry Christmas , we are in pittsburgh PA
@141poolplayer4 жыл бұрын
@@markgalicic7788 OK Mark, I live near Youngstown, Ohio. 1 hr from Pittsburgh.
@markgalicic77884 жыл бұрын
@@141poolplayer if you get out this way stop by
@TheVideoSteve4 жыл бұрын
Another nice addition to the mill would be a waste board chipper.
@markgalicic77884 жыл бұрын
we cut the slab wood up for firewood
@lewiemcneely91434 жыл бұрын
@@markgalicic7788 Slabs burn GOOD!
@davidturney98134 жыл бұрын
Hats off to MR. Eddie H. Merry Christmas
@markgalicic77884 жыл бұрын
thanks David & Merry Christmas
@lewiemcneely91434 жыл бұрын
@@markgalicic7788 THE Mr. Eddie!
@robintaylor-mockingeemill82234 жыл бұрын
have a great holiday .
@markgalicic77884 жыл бұрын
Merry Christmas Robin.
@mikemike28644 жыл бұрын
was wondering what kind of lighting u will be using?
@markgalicic77884 жыл бұрын
we hope that some LED lights will work.
@lewiemcneely91434 жыл бұрын
@@markgalicic7788 DAYLIGHT hopefully. Yall have enough to do without after dark too!
@robertputnam63244 жыл бұрын
Would love to see a camera behind the operator and see the hand controls
@markgalicic77884 жыл бұрын
thats funny you said that , we just had someone stop out to see the mill and said you need a camera in the cab behind you.
@robertputnam63244 жыл бұрын
@@markgalicic7788 The hand control are were the magic is
@markgalicic77884 жыл бұрын
@@robertputnam6324 yes sir Robert , I will do a video of the controls one day.
@dicksoprano53104 жыл бұрын
Going to be nice
@markgalicic77884 жыл бұрын
yes sir Dick.
@nomerc36084 жыл бұрын
No views nor thumbs up
@markgalicic77884 жыл бұрын
I can see them
@lewiemcneely91434 жыл бұрын
@@markgalicic7788 I was late but not gone yet!
@countryboylogging49804 жыл бұрын
How many days a week u run ur saw mill
@markgalicic77884 жыл бұрын
a few days a week this is a part time mill so it does sit a while between uses .
@countryboylogging49804 жыл бұрын
@@markgalicic7788 keep u the great videos watching u makes me want to get back to running sawmills