Marking a Waterline or Bootstripe - Fast and simple

  Рет қаралды 14,627

Nomad Boatbuilding (Nomad Boatbuilding)

Nomad Boatbuilding (Nomad Boatbuilding)

Күн бұрын

Пікірлер: 32
@mattevans-koch9353
@mattevans-koch9353 3 жыл бұрын
I'm definitely for the sailing part. Thank you again Mark. Have a great week ahead.
@til7545
@til7545 3 жыл бұрын
Excellent show & tell, including the explanation of a swept waterline (iof which I had no idea it exists). This is one more video I‘ve bookmarked for when I‘m there with my build - in … say 18 months? 🤣 Thank you Mark!
@SmallBoatSchool
@SmallBoatSchool 3 жыл бұрын
Great tutorial. I love the wedge trick!
@hankcohen3419
@hankcohen3419 2 жыл бұрын
Very informative, Thank you. It would be nice to see a closeup of how you cut the tape at the laps.
@Nomadboatbuilding
@Nomadboatbuilding 2 жыл бұрын
An oversight on my part. I should have shown that. It is usually cut in a Z pattern, depending on how the line crosses a lap. Just imagine how there would naturally be a span of an inch or two where the line leaves the edge of one plank before it hits the joint between the other. Visually at least. It's rarely a square line passing from one to the next because of the oblique angle.
@CrimeVid
@CrimeVid 3 жыл бұрын
I worked on a boat where both the boot top and the water line had been marked in with a chisel, she was 80’ ! I always felt for the guy that had to do that ! Over the years I caulked her once, painted her three times and fitted the cabin sole.
@Nomadboatbuilding
@Nomadboatbuilding 3 жыл бұрын
Gotta keep the apprentice busy with something. 320’ of chisel work should do the trick.
@pontuswendt2486
@pontuswendt2486 8 ай бұрын
Very cool!!! Thanks!!! Btw What is the ruller called?
@Nomadboatbuilding
@Nomadboatbuilding 8 ай бұрын
It's called a 2'-four fold carpenters rule.
@pontuswendt2486
@pontuswendt2486 8 ай бұрын
@@Nomadboatbuilding Thanks! Looks nifty!
@jonathanriddell6302
@jonathanriddell6302 3 жыл бұрын
Always wondered how this sort of thing was done - thanks
@loki7441
@loki7441 3 жыл бұрын
That was a good, informative and simple way of marking a waterline. Nice looking dinghy too. Its a pity I didn't have this information last year when I was painting the ships launches on the 1/350 scale model of the Tirpitz (plastic unfortunately, sorry) At 3 cm long they were a bit of a pain, as I got a bit anal over them being just right. 😄 I just noticed too that the boot top on the starboard side at the bow has a slight down turn. I just have to convince myself to leave it alone and display it from the port side.
@Nomadboatbuilding
@Nomadboatbuilding 3 жыл бұрын
Thanks for that comment. You just gave me an idea for marking swept waterlines on models. I’ll try to make a video of that for you.
@loki7441
@loki7441 3 жыл бұрын
@@Nomadboatbuilding 👍👍
@JenkinsBoatWorks
@JenkinsBoatWorks 3 жыл бұрын
good info, great video!
@davidmoore5021
@davidmoore5021 3 жыл бұрын
Thanks for sharing
@Starboatbuilder
@Starboatbuilder 3 жыл бұрын
Hi Good video; you need to do more of the hand-on things. Have you built any hi-tech oars,( since Victoria is the rowing center for Canada) ?
@Nomadboatbuilding
@Nomadboatbuilding 3 жыл бұрын
I thought everything I do is a hands on thing! I haven’t done ant particularly high tech oars. Mostly just traditional straight bladed ones. The rowing clubs go in for all the carbon fibre stuff.
@dennisdavidek6694
@dennisdavidek6694 2 жыл бұрын
The “cat can” full of push tacks is a shop standard. 👍
@southerneruk
@southerneruk 3 жыл бұрын
What you are calling a water line and boot line, Is commonly known has the loading line, a lot of people get this mix up with the plimsoll line, which is an added bit to the loading line, the plimsoll line has a few markers on it that tell you the difference of the loading level in different waters around the world
@MrKubaitis
@MrKubaitis 3 жыл бұрын
Thanks!
@jerrycomo2736
@jerrycomo2736 3 жыл бұрын
Rope rubbing strake-Don't see these very much these days. Need a specially formed wood strake to seat it in. Not many videos showing how to install either. I've researched and came up with several points. Uncoil slightly to bury the stainless steel screw within the core and also hammer the rope as you take a strain to relieve stress. Can't find anything on maintenance/upkeep either.
@Nomadboatbuilding
@Nomadboatbuilding 3 жыл бұрын
I’ve never done one but there are probably some maintainable traditional attachment methods. For the most part I think it’s a non-maintainable detail that assumes you will use it lots and replace it often.
@marca5883
@marca5883 3 жыл бұрын
👍👍👍
@MrJhchrist
@MrJhchrist 3 жыл бұрын
Why not just do it the easy way and float it in a big puddle of bottom paint? ;)
@soylentgreen326
@soylentgreen326 3 жыл бұрын
Nobody likes a wobbly waterline 🤔 We don't need no lazerbeams 🤣🤣🤣 String sticks level 🔨 plumb bob and some odds and ends 👍👍👍👍👍 Agree with you Mark to get up sweep tricky with a Lazer. Master Yoda assures me he can cut a fine upsweep with a Lightsaber 🤭🤯🎯
@saijuakshaya1983
@saijuakshaya1983 2 жыл бұрын
I need some help can you
@bipedalhominid6815
@bipedalhominid6815 3 жыл бұрын
I just free hand it with painters tape.
@Nomadboatbuilding
@Nomadboatbuilding 3 жыл бұрын
Well that wouldn’t make much of a video now, would it.
Old Boat - Fresh Perspective - Critiquing my early work
35:21
Nomad Boatbuilding (Nomad Boatbuilding)
Рет қаралды 8 М.
International 2.4mR Sailboat Project - Episode 28 - Sheer structure
32:12
Nomad Boatbuilding (Nomad Boatbuilding)
Рет қаралды 13 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
How To Paint A Straight Waterline
4:11
Captain Rob Thompson
Рет қаралды 10 М.
How to Turn Over/Flip a Boat Hull by Yourself and Building a Boat Cradle S2-E34
27:45
Building the Catalina Wherry - Part 9 - Shaping the Stem and Stern-post
29:04
Nomad Boatbuilding (Nomad Boatbuilding)
Рет қаралды 10 М.
International 2.4mR Sailboat Project - Episode 53 - Painting the bottom
32:18
Nomad Boatbuilding (Nomad Boatbuilding)
Рет қаралды 34 М.
Wind Vane self steering systems - An easy, animated introduction on how they work
11:56
How to measure and cut a straight Boot Stripe on the Waterline
6:38
Tips from a Shipwright
Рет қаралды 94 М.
International 2.4mR Sailboat Project - Episode 27 - Trimming out the sheer
36:21
Nomad Boatbuilding (Nomad Boatbuilding)
Рет қаралды 15 М.
How To Varnish Wood Quickly | Fast Epoxy Clear Coating Method
12:57
Dan Lee Boatbuilding
Рет қаралды 107 М.
Best laid Plans... To Build a Wooden Boat: Chapter One
18:43
Matt Dean Films
Рет қаралды 46 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН