Why does this Free Energy Generator not work?

[@All_Things_For_Jesus]

I came to realize that inventing something takes time, money, and energy (lots of brain power). Glad to hear it back so soon from you.

[@MarkusNenning]

I know right it’s very time consuming. And yes unfortunately all the components are pretty pricey. Happy Thanksgiving!

[@dominus6695]

The inventions and inventors already exist. It's about resources, funding and censorship (or lack of it).

[@gatogato7079]

Have you try a small motor with higher rpm to make the generator going a bit higher in rpm.......impulses from kinetic energy are very frustrating thing

[@theDaftman]

All good when you're making a joke of it, when you start getting somewhere men in black suits show up, show you pictures of a room for rest of your life, your family will pay the price. No one is allowed to talk about it. The end.

[@suriyap5643]

Free enegery genergy works, but not completely free, we give less input get more 2 times more output, here we need to consider and use less rpm PMG , use bigger flyfeel, approximately per 1kw 40kg weight ,also use gear systems, also one more method, less rpm PMG ,bigger diameter gear, like we give more torque by less force, ( force *distance) , for eg .. We use extension rod for open a hard nuts, same hand ,same force, by increasing the distance of the rod we get more power

[@MarkusNenning]

Thanks for the feedback!

[@JohnGaultierOff]

You also can make a video to debunk this bullsh*t topic and be the first to explain that the wheel hold energy like a battery but on CINETIC FORM... maybe I teach you that 😅, look VOSS (literally wheel sun battery) you should get articles (probably in French) to explain what I talk about. If the weight whell was a third generator, MAYBE, you could produce a surplus of energy, but here, use the force to make the weight whell turn is obviously a loss of energy...

[@bradhayes8294]

This is easy to do. All you need are frictionless bearings, 100+% efficient motor and generator, a perfect vacuum, 100% efficient belt/pulleys, room temperature superconductive electrical components, and perfect dynamic balance. Easy!

[@andyhowlett2231]

And even then there would be only enough power to keep the thing turning. Any attempt to get power out of it would stop it. All these things are dreams.

[@gautam4664]

@@andyhowlett2231 right!

[@CS-en5xz]

Lol. This video us so full of 💩 i can smell it through the phone. No i dont have any on my hand 😏

[@Forbiden_Ways]

And a djinn to flip the switch

[@MarkusNenning]

Sounds easy enough Brad :)

[@rajaramv_06]

TRY Axial flux permanent magnet generator its really low RPM and produce high Voltage or Ampere regarding to the Magnet arrangement and the Aix gap . I've designed one for my college project with just at low cost . Please give it a try or research in Axial Flux BLDC motor & Generators.

[@Ghanzo]

Force 1 (the motor) accelerates the wheel but load 2 (the generator + load 1) decelerates the wheel more than force 1. Very cool design however. I think it might be useful if the wheel were big enough to be a battery and the generator could pull load off of the wheel over night, and the motor could spin it with solar during the day. The generator would need some sort of on ramp to initiate startup of the load, as well as releasing the generators shaft when no load is needed (100% efficient generator would solve this but all generators are not 100% as far as ive seen), as load is initiated friction is applied to the generator’s shaft until it matches speed with the wheel, and when load is no longer needed the shaft is decoupled from the wheel. If the bearings are really good, and the weight of the wheel and the speed of it is fast, and if it is in a vacuum, you create a mechanical battery!

[@MarkusNenning]

Thank you for the feedback and compliment on the design Ghanzo!

[@champphil4910]

Try using a low rpm generator

[@eddwop1]

we ,without a doubt , know there is over seeing faction that doesnt want energy giving for free. this includes fossil fuels. trillions of dollars, would be taken from these factions. not to mention the other kind of power. there has been thousands of invention deep sixed over the years. but, the most important thing , is to keep pushing these personal power alternatives . i really enjoy your site.

[@MarkusNenning]

Thank you very much Ed!

[@adamreynolds1291]

Yup I'm sure the government already figured it out. Other governments to if electricity suddenly becomes free there will be a major problem with the economy as we no it.

[@MarkusNenning]

@@adamreynolds1291 for sure and probably war.

[@TheCraigy83]

@@MarkusNenning You're* all fast asleep . i can't explain without spoiling my own project potentially giving better funded men my idea before i'm finished.. 2023 ish .

[@MiNiONaToR31]

So I assume, someone contacted you or they came to your house, thats why you made this video for patents and government (dont have rss, knowledge, bla bla bla). Now I am even more hiped to try and build it for myself. I will try it with neodim magnets. They can be used to make energy with coils and can be used for spining, or for levitating a single axle (shaft). If you make this generator and put it in a vacuum, you will have basically no friction. The only problem is, that neodim magnets are expensive. Thats my vision.

[@MarkusNenning]

I hope you will succeed! I am also working on a different concept with neodymium magnets.

[@AlfredoGarcia-pf7lz]

WA2

[@jamesrcoleii4577]

You should use a 12 volt motor with a battery as well as adding a alternator to charge the battery. Works better and uses less power to run generator. You can also use a solar system with this to charge the battery as well as a wind turbine. With this system you can run all your lighting off 12 volt and all your plugs and appliances off the 220 volt generator. Been designing and building these for years. Also, the reason it will die as soon as you plug in your motor to the generator is because you can not ground them together. This is why you need two different systems to make it work. (motor, solar, wind, water, or battery) By using a motor with a battery along with a 12 volt motor, with wind and solar it will work because you have a belt running the generator. Nothing running between them to ground them together. You also would want to put a rubber mat under both the motor an the generator so they do not ground by the frame along with some bold inserts to keep them from grounding through the frame. If you make these changes, it will work. Always keep trying mate. We never learn if we stop trying.

[@MarkusNenning]

Thank you James! I am currently working on getting all the components for a much smaller version to see if the concept works. Will try the batteries suggestion.

[@Bound4Earth]

Why would you include an alternator, this is a myth. If it worked, electric cars would include alternators and you would never have to charge them.

[@jamesrcoleii4577]

@@Bound4Earth Really, you do not say. That is the whole flaw of electric cars. Along with a few other flaws. I mean use common sense. You answered your own question by including the electric car statement. Use your brain. The other answer is you would not make any money in electric cars.

[@jackbarr1124]

Once the fly wheel is fast enough you dont need the full amount of electricity to keep the fly wheel turning. You only need to use 50% of the power to keep the fly wheel turning, that would mean you could use the other 50% to fill a battery. You need a switch that alternates the power between keeping the flywheel turning and filling a battery. Think about it when you push a kids roundabout and the roundabout is turning fast enough you only have to hit it now and again to keep it turning at high speed. Your doing it wrong: kzbin.info/www/bejne/kGG6YmCqYrykeNU

[@jeremymcdonald5281]

I just commented on your first video..... I beleive that your ideas of a sustainable mechanical energy system align very closely with mine. The fact that you mentioned freq drive control is blowing my mind right now. I too believe this can be achieved through such a system.

[@tonickinley]

Its not him idea.

[@davidmceuen5875]

What you need on a flywheel is a flywheel tank with flaps on the inside water and fries mixture on the inside list flywheel spends buy a motor a one-sided flywheel you can touch others generator motors on the other side of the flywheel that generates power one to turn the flywheel electronic waste switching the power from the grid over to self on the other what's the flywheels in motion the waters in motion triple Force fluid of course it's like your own personal waterfall that will turn the flywheel with a minimum amount of power from the motor kicking on and off and Coast well others take the power from the flywheel turn into electrical energy should be a professional motion that machine and free energy it's only a you can always make it bigger than that always you can add flaps on the outside and create are shut chamber around the flywheel will the wind then go down around the when power instead of electrical to start the to start the flywheel in motion to start creating power

[@robertfoertsch]

Amazing Analysis, Deployed Worldwide Through My Deep Learning AI Research Library…

[@lazivanovalfateam3314]

Hi There, All you need to do is listen on you tube "Interview with Tom Bearden" , he explains Tesla theory there for this generator called overunity

[@wynoose66]

They used a 4 pole generator, which runs at half the rpm. Notice their pulley ratios, he tells the sizes. Do the math and you’ll see the ratios. Yes free energy exist, well that’s what a friend told me. There are many other ways to do it also. Off balance wheel, self pumping water wheel, permanent magnet motors, and probably a few others. Or so a friend of mine told me so. FYI, you don’t want to patent anything considered free energy (over unity). Best wishes and hope you get it.

[@MarkusNenning]

Thank you very much wynoose66

[@nemesisobsidian]

I wonder if you would get a visit from men in black and possibly disappeared for exposing such tech on KZbin. Dear government- I'm just a curious casual having a convo with other people. I'm dumb AF and wouldn't know the first thing about tech like this. Thanks for your concern and here's my 2 finger salute: ✌️

[@abdulloh6250]

Hahahaha.... Selain cerdas anda juga sopan dan lucu. Salam sayang dari Indonesia 🇮🇩 Auto subscribe 😍💪☕👍 Never give up, brother... 💪💪💪😍☕

[@pablol.8135]

Your videos are so great! You're thorough and entertaining! Keep it up man!!!

[@MarkusNenning]

Thank you very much Pablo I appreciate that positive feedback!

[@lifejourneychannel8627]

Install gear system for better running performance of flywheel and motor.such as power supply isue to the motor.

[@ashifahmed9536]

Waiting for next free energy video

[@johneygd]

Yeah, he just wasted our fucking time for nothing,just a bunch of nonsense talks and generic jokes,GGGGRRRR😡😡😡😡😡

[@johneysupergd7796]

If he does not make a fully perpetual motion magnet motor free energy device within 60 days, he and his children will face me on his doorstep(!), bECAUSE AM DONE WITH ALL THESE FUCKING BULLSHIT NONSENSE FAKE OVERUNITY,,FREE ENERGY AND MAGNET MOTOR DEVICES ON KZbin,BECAUSE IT’s JUST NOTHING BUT PIECE OF SHIT,,FUCK DAMNIT😡😡😡😡

[@ashifahmed9536]

@@johneysupergd7796 yeah i wanna see what adjectly happens. In Pakistan an Indian are lots of making this type video.

[@adebagboisaac2275]

You must be a mechanical engineer. to do all the analysis you did . Finally what do you suggest

[@MarcosGallardo1959]

As an Electrical Engineer teaching Physics and Energy Transfer at the University is very sad to realize that so many people still believes in "Free Energy" or "over-unit Energy" or efficiencies above 100%... Detailed formulas and measurements have worked very well to explain all the electrical phenomena, loses, efficiencies and mechanical constraints. Please don't lose more time in trying to reach the impossible.

[@FoxRoxification]

The problem is that people dont accept or understand that you cant produce energy. Energy is not a product which can be assembled or created. Its more the potential to do something and that potential is finite as far as we know and observe.

[@lucianungurean]

Totally Agreed with You . I don't even need to crunch down the numbers to see all the Flaws in the system . Every time I see these systems I come to a conclusion . I really don't think that people know what EFFICIENCY means at this point . Many people lost their entire life looking for something that don't exist . All these people should Focus on making a System more efficient

[@lucianungurean]

@@FoxRoxification Yeah it's part of Thermodynamics Law . Funny in some crazy sense . They think these laws were made for no reason 😂😂😂😂

[@lucianungurean]

Did you see that when these people get to a thing they don't understand they get to those Super complicated Technical terms ? Nano scale ? Molecular ? Energy is Vibration ? WTF ? what's a motor a generator and a Flywheel has to do with Quantum mechanics ? LMAO !

[@nyuykongehfrancis4941]

Can't get free energy from the sun and store it for the night? What about hydroelectricity power.

[@roofventsaustralia3177]

Wind-powered alternators are low rpm. The larger the diameter the slower RPM''s needed to produce power. The pullies should be configured to work as leverage. 1:1 does nothing. DC motors are more powerful. A bridge rectifier from the alternator to DC motor works like a charm. From bridge rectifier to Ultracap just makes sense. The stored energy should be enough to run the DC motor and it is instantly charged by DC power coming through the rectifier. PS don't listen to engineer dude, he never invented anything.

[@MarkusNenning]

Thanks John!

[@موسوعهالكابتنمعتز]

Hello dear, forget about Einstein, listen to Tesla and raise the frequency by Vd.

[@oliva18650]

Hello my name is José Manuel, I am from Spain and I really like your videos, I am interested in making one, could you please tell me where to buy the axle, the weights, pulleys and the attachment of the weights and pulleys to the axle, thank you and a gretting.

[@MarkusNenning]

Thank you very much Jose! I will add some links in the description in the next couple days hopefully that will help you find the parts. I know it can be very time consuming otherwise. It should be easier in Spain since you have only the metric system and not a mix of both:)

[@antfer5169]

Hola yo también soy de España llevo muchos meses siguiendo este tipo de inventos, aportando ideas y también he intentado hacer algo, es difícil pero creo que se puede conseguir ahí buenos prototipos, pero hay que confiar en los imanes permanentes

[@automationpk6720]

You can use inverter for three phase motor reduce the amps as you desire the Hz I'm from Pakistan

[@hereforbananas8378]

Gear ratios should alow you to minimize power needed to start everything and maximize rpm to the generator giving you the most potential for this to work

[@dankem4947]

Do you have build something like this? Can it really work? Thanks from Germany!!!

[@jonnyrox116]

Gearing adds friction that can't be overcome

[@hereforbananas8378]

@@jonnyrox116 True but gears can add torque meaning you could in theory and more power generation units there should theoretically be a point were generation overcomes loss from friction and condutive loss the whole idea due to the laws of physics is a pipe dream but so was all great inventions to date

[@MarkusNenning]

Very True JonnyRox!

[@dankem4947]

Wann darf den die Menschheit darüber erfahren!

[@papayongsarninei8133]

It won't work because of common sense.

[@MuhammadAwais-ix3kb]

Dear Bro. We've mentioned this before and look forward to hearing from you about this new video. "If we place the Heavy wheel between two powerful magnetic wheels and magnetic force rotates the weight wheel according to the desired cycle, then we will definitely get good results.

[@MarkusNenning]

I am working on modifying a car alternator with permanent magnets to see if that works. I will make a video about it once finished. Thanks Muhammad

[@miketully9592]

There's a video is pretty old but it is still up the Wilkinson machine there's only one video there was never a part 2 ??? And I don't think that was because it didn't work ! I say take his gravity generator and make it a closed liquid system I know the 12 volt fuel pump in my car can run a couple of hours and not run my battery dead so I don't imagine it would use a whole lot of power to pump 10 gallons of liquid back 15ft in the air to a holding tank I would say the output if it had an alternator/generator on it would run a 12 volt fuel pump and more

[@MarkusNenning]

Thanks Mike, I do have a video on an actual gravity generator you might want to check out.

[@tessarellano3297]

The pakistany free energy used 2pole motor & 8pole generator for good result.

[@fidelcatsro6948]

Oh yes!!! VFD variable frequency drive to run the drive motor!! high frequency = less amp draw! but i dont think its ever going to work on flywheel and motor alternator setup alone.. you need to use a battery (or a bank of expensive supercaps) to drive the motor and use a generator to rechage it at the same time! So here is the catlist in my opinion : Motor Generator Flywheel VFD Variable frequency drive for drive motor Battery to power the motor Inverter to step up DC from Battery to AC for drive motor

[@dominicgeorge7299]

This guy is a faker

[@MarkusNenning]

Yes agree would be nice to have all this components to experience but out of my budget at the moment. Thanks!

[@MarkusNenning]

@@dominicgeorge7299 what is it that you think I am faking? :)

[@dominicgeorge7299]

@@MarkusNenning please research gerad Morin, also Patric Kelly, there's a Nigerian plus an Indonesian ,they all show the real way That producing free energy with a generator is possible, I personally like the one from Nigeria you get a detailed description plus demonstration, your video makes it look like the claims are fraud ,please contact gerad Morin with your camera and interview him show him your videos, stop trying to distracted people

[@MarkusNenning]

@@dominicgeorge7299 thanks i will check them out.

[@nurrahmatekoprasetiyo3047]

That generator self operation, maybe replace in rotor generator by strong magnet,

[@rexdelacrusdelacrus9027]

There's a free energy in Singapore that can absorb all the energy all over the place, it's atomic energy

[@harrycallaghan2531]

As I mentioned in your other video you need to modify the alternator. You need to remove the rectifier and modify it. Do you understand! I will give you a clue you need to divert the magnetic field. Or you can waste your time and money trying to make this more efficient with flywheels that are weighted more at the rim etc. and belt tensioners etc. - All of which won't work as you NEED TO OVERCOME THE MAGNETIC FIELD WHICH IS BEING ABSORBED BY THE METAL IN THE ALTERNATOR/GENERATOR AND DIVERT THIS TO THE OUTPUT OF THE GENERATOR! Your welcome!

[@MarkusNenning]

Thanks Harry

[@harrycallaghan2531]

@@MarkusNenning No problem Markus

[@johncarreon8040]

Hi Harry You are brilliant, it really works. Thank you for your suggestions. I have almost the same set up liked Markus. Mind has no flywheel. Just Drive motor that 3450rpm wired to 120volts and 3600rpm generator 5000 watts watts. It’s a belt driven setup. My drive motor was lacking out power. I did removed the rectifier and modified the generator like you said. Them it works well done ! Thank you Harry!

[@MarkusNenning]

@@johncarreon8040 do you have a video you can share John? Congratulations! Glad you had more success.

[@haroldkline4898]

Mr Nenning, you're engineering and manufacturing capabilities are impressive. I am a pursuer of free energy and have tried many configurations of magnet motors and other devices. The one that showed the most promise for me was the Luling motor out of Germany. I don't believe the online plans and info to be entirely accurate though, so I made a few carefully considered changes. Is there any way you might consider doing a project on it? I wholeheartedly believe that this design has the potential to deliver more energy than it requires to operate, but it will take a precise and steady hand to produce it. Let me know please. Thank you!

[@MarkusNenning]

Hello Harold, first off all thank you for the kind feedback! And yes I am interested in doing a project on it. If you could please send me more information on it so I can do some research on what kind of material is required. [e-mail]

[@MarkusNenning]

@@dusan78 I have tried to plug everything up to a toaster and several high wattage equipment. I have also plugged in a second motor into the generator that uses more power than the one powering the generator. That is proving that the generator is able to produce the required output. I am aware that a generator under load works like a break. That except concept is used in semi truck breaks and electric cars. I have not given up yet. Thanks for the feedback though.

[@markpacquiao7371]

888

[@MarkusNenning]

@@dusan78 thank you very much for your input. Appreciate it!

[@silvioyamada]

@@dusan78 Yes, while I agree with your statements except it seems that you're not considering the addition of inertia wheel (mechanical battery). Here is possible scenario, at 1st step the motor, inertia and generator reaches the desired speed and stabilize. Here generator has no load. Next, the motor is unplugged from energy source for couple seconds. Entire system still spinning/maintaining. Next, the generator output (current) is plugged to the motor input. Now generator tends to slow down due to the load to run the motor. As generator is connected to the inertia wheel, if large enough the drop in speed is negligible and it is the driver of the system. So generator is feeding the motor. Next step can be adding load to the generator. It will follow the same logic as previous step as long as load is not heavy enough to reduce the inertia speed and not exceeding capacities of motor and generator. I'm not saying that it will work for sure but it is a possibility and must be proven. Here it seems the key is to find right relationship between the motor, Inertia wheel and generator. I'm not in electrical engineering, so not knowledgeable about motors and generators behaviors. It won't work based on classic physics

[@robertfoertsch]

#TESLAHydroElectric

[@joshuatovar6295]

The detail you go into for these videos is awesome. It makes it easy for anyone who wants to try and repeat this experiment to be able to give it a shot.

[@MarkusNenning]

Thank you Joshua I am trying It helps that I enjoy making this videos:)

[@Av-livePk]

In your model there is a ear mechanical mistake you didn't notice. But good you tried.

[@danielg6619]

I don't know if you know it seems to work well .. Electromagnetic Generator - Prototype for 10kW - KZbin Video - Infinity SAV Daniel

[@r.a.monigold9789]

Belts break. Bearings fail. Windings eventually Unwind. Heat and Rust never sleep. Super efficient? Probably. Free? NOT. INFINITE, no.

[@MarkusNenning]

But that isn’t exclusive to this kind of generator. And yes free is probably the wrong word because the equipment will always require initial investment and maintenance cost.

[@artofwarandpeace]

Can you explain Infinity Sav or Amber kinetic? That would be a nice video.

[@MarkusNenning]

Thanks Artowar I am actually not sure what direction to go DIY or something in this direction. Thanks for the idea!

[@Kapalek84]

@@MarkusNenning I did some diy attempts to couple of different ideas in motor/generator topic. I can suggest that 1. there is no point in spending a lot of money on something that might not work (unless you have a lot of money and purchase of machine that does not work as expected is no problem). 2. Do a lot of experiments on basic components (self made windings, magnetic mechanisms and distribution of magnetic field in metals). Once you will be able to predict what strength of magnetic field you can achieve with inductor of certain size and winding numbers you will be able to understand all electric devices better. 3. Get an osclilloscope, magnetic field measuring device (up to 2000mT scale) and an Arduino microcontroller 4. Familiarise yourself with control of mosfets and microcontrollers its easier than most of people might think 5. In my opinion the most efficient generator that can be made is coreless - axial flux architecture (every stator core will attract the magnets on rotor and that will always cause loss of kinetic energy that is why I think coreless stator allows for maximum possible efficiency). 6. High efficiency generators ALWAYS require high precision and good quality components (good bearings, shafts and stiff and precise stator structure (this can be achieved with machined plastic)) if any gearbox is used then there always be some energy lost on gears - simple power transmission is best. 7. High voltage-low current devices should heat up less so high efficiency should be easier to achieve. 8. All the time spent on such projects will be wasted if there is nothing that we can learn from it for the future. If you understand principles of electric motor types and design you will gain something out of your project even if you wont achieve overunity and this is the most likely scenario. Ive seen really top class experiments carried out by the best diy experimenters and only some of these experiments were showing sort of energy gain but it can always be a measuring error. 9. Last thing is to get equipment for precise power output measurements. If you wont be able to accurately measure how much power is flowing out and how much is flowing in it will always be a guess work and not a proper experiment that proves something.

[@MarkusNenning]

@@Kapalek84 thank you very good advice!

[@Kapalek84]

@@MarkusNenning good luck!

[@MrDKONZEN]

Select a permant magnet generator with lots of poles. "Lenz law" is why text books will tell you loading a generator with resistance of motor spinning it will not work.. no matter a flywheel or not. Example turn a car alternator by hand it spins easily...now connect headlights to it and it will be impossible to spin by hand as so much electromagnetic braking this is called a lenz reaction. No 1 problem to overcome in a motor generator system. You spoke of phase shift in sound, there can be a phase shift in time of manifest of electromagnetic back forces in generators that cause the lenz braking effect. Lenz only happens when generator is loaded with an electrical load. The time period it takes to become a strong enough reverse force on rotation of generator rotor is the time period you want a rotor of permanent magnets to rotate into position during this time period so that the rotor is pushed forward in rotation, speeding up rotor rather than pulled backwards, slowing rotor. Basically the time lag of the electromagnetic back force (lenz reaction) occurs precisely according to speed of rotor of permanent magnets so that the magnet that induces power into generator coils is not the one directly underneath the coil being induced, bit the UPCOMING rotor magnet of a reversed polarity, or the leading edge of upcoming rotor magnet in rotation of rotor rather than trailing edge. Now the generator rotor will speed up under loading instead of braking. Now it's possible to "loop" motor and generator and pull the plug from wall. Study RomeroUK Muller generator on KZbin. Study Thane Karl Heinz delayed lenz effect on KZbin too. So much fake free energy stuff on KZbin it's hard to find what's real. They do this on purpose to flood it with disinformation. Try a pancake washing machine motor for both motor and generator Samsung brand or fisher and paykel brand. Get them with 36 poles. You have chance of looping and having free energy motor generator with them. No chance with generator you have now as it will brake like crazy when loaded no matter what. The pancake motors much more efficient motor than what you have too.

[@petercernjavski9419]

In my opinion, apart from stabilising the frequency, a flywheel cannot contribute to generating free energy. It must literally be pulled out of the vacuum by eliminating the counter electromotive force; as scientist Tom Bearden theoretically explains, it is also possible without moving parts. The Germans had already built such devices experimentally to recharge the batteries of their tanks in Siberia. Free energy is reality but has been covered up by the energy lobby and their servants. However, THE MIRACLE POWER PLANTS WHICH DO NOT USE FUEL, NO SOLAR, NO WIND, are marketed by Swiss company TransAltec AG. The TransAltec websites offers all three generator variants: - 3 MW (8 million USD) - 10 MW (20 million USD) - 150 MW (245 million USD) Delivery time is given as 16 to 18 months and at ordering, customers are expected to pay 50% of the respective amounts in advance. Of course with mass production it will become inexpensive.

[@MarkusNenning]

Thanks Peter! Very low budget website from transaltec but very interesting!

[@neilgould3626]

Believers in free energy are on the same level as those who think the world is flat…..😂

[@3DLasers]

Well believe it or not the world is actually flat I've seen it before. In fact I see it every day and it still looks flat to me... 🤠

[@humboldte55]

@@3DLasers flat or not we have never left this rock

[@jonathonlyles3349]

👏🏻👏🏻👏🏻

[@raymondburnette4260]

Lol into the Christie magnet generator out of Australia

[@valveman12]

"The laws of thermodynamics are often cited as the reason we can't have sustainable energy. But is that really true?" *Answer to your question* The Laws of Thermodynamics do not prevent you from creating sustainable energy. We have lots of examples of sustainable energy that do not contradict the Laws of thermodynamics. For example Solar Panels, Wind generators, Wave motion Generators, Thermal Generators, and electric Dams. None of these go against the Laws of Thermodynamics. However, when it comes to making claims of over-unity and free energy devices, then they contradict the Laws of Thermodynamics and therefore are not possible. *1st Law of Thermodynamics* *1.* Energy Cannot Be Created or Destroyed. If you can't create energy, then how can you have a higher output power than input power after going through all the losses (Heat, Friction, Lens Law,... etc). Since everything has losses and you can't attain a minimum of 100% efficiency, then free energy devices are not possible. Some people who have little background in Science or Engineering will claim "Laws are made to be broken." What they don't understand is that these Laws are not created by us, but by the Universe, we live in. IMO, it's more advantageous to work on improving efficiencies and other forms of sustainable energy, rather than try and build the impossible.

[@MarkusNenning]

Thanks for the feedback Valveman12!

[@joespruill6447]

work on improving efficiencies, I have been saying this for years?!. for example, combining these ie solar, wind and hydro maybe even battery storage for peak hours etc. I mean just how many solar panels could the Hoover damn hold? These damns create massive amounts of air flow from the water coming off the damns, so catch that. You mentioned wave gens, there is another. Just how much could we upgrade the infostructure that we already have?!...

[@MarkusNenning]

@@joespruill6447 exactly! The question is why is it not done already? The energy sector is a greedy business!

[@joespruill6447]

@@MarkusNenning It is just the only one's brave enough to invest is big money, like Elon. He saved Australia's power grid for a while. It's just going to take riskier investors and there has never been a surplus of them. They are the ones that make the biggest returns though...

[@freddodudodo5461]

It will never work with any actual currently known technology.. you quoted the first law of thermodynamics, but there are 3 more. and one of them teaches us this; there is no system in any field of physics and chemistry, which has an efficiency equal to or greater than 100%... and do not forget that a motor or a generator are not machines that produce energy..But it transforms an energy input into another form of energy output. From electrical energy to mechanical energy in the case of a motor and vice versa for a generator....In addition, these machines will not transfer more energy than is required at the output. Even if your motor says 3000w(Max output), if you couple a load that consumes 2000w, the motor will transfer 2000w... if it's a 4000w load, the motor will transfer 4000w and burn out...One important thing that you have not shown on the nameplates of your devices is their efficiency, often denoted 'μ' and having a value in %, in general on an engine and an alternator this value is between 75 and 85%...This means that to transfer an energy of 2000 to the output, you will consume an energy of 2000 + 2000 * 20% = 2400 to the input (If available)for a machine with an efficiency of 80%. And this is why it will never work... Maybe one day someone will invent a technology that will challenge the very misnamed laws of thermodynamics. but since the 17th century this one has resisted experience and has never failed..So let's not try to reinvent the nail.. this machine will not work, the laws of physics tell us so and save us time...

[@MarkusNenning]

You may find this video interesting curious to what you think about this technology? Also curious how you use the laws of thermodynamics to explain it? kzbin.info/www/bejne/raLFe4p4qdR5g7M

[@markvincent8132]

Thank You for the very helpful video. I have been looking at the same video's as you about these free energy generators the one thing I have noticed is the size and weight of the flywheels they are using, I is a 32" 120kg and the other is a 100kg and another is using 2x 200kg flywheels but can not tell what speed they are running them at, your 2x 45lbs weights convert to 40kg approx. So not carrying enough energy to keep it running.

[@MarkusNenning]

Thanks Mark! Yes I have noticed that also but also keep in mind that most of them use a 10kW generator twice as much as my small generator. That’s why I assumed I should be ok with half the weight. The good thing about my design is that it can be scaled and I can add more plates. Just out of funds at the moment :)

[@mickmccrory8534]

@@MarkusNenning ... Scale it up & sell it to the power company. Then they can stop burning coal.

[@sundrammokanathevar9692]

let me put it this way, the ac motor powers the flywheel, and flywheel runs the generator. 1 . flywheel size 1. should have two belt pulleys, size 1/3 and size 1/2. 2 . ac motor belt pulley size 3/4 or 7/8, to flywheel belt pulley size 1/3. 3 . flywheel belt pulley size 1/2 to generator belt pulley size 2/3. now we have 4 belt pulleys and 2 belts. flywheel conserve energy to run generator. generator runs ac motor. and ac motor powers the flywheel. if we get to reduce crypto mining electricity cost it'll do mean a lot.

[@MarkusNenning]

Thanks! Yes this would be great for green crypto if it is possible 🤔

[@colbyjohnson2344]

Love everything about this. I have been trying to make a high efficiency axial flux motor. I think this could pair nicely wth your project. They could be mounted directly to the face of the flywheel. And I think that's the goal with the whole thing. Minimize losses everywhere. But it sounds like you are already thinking of that in far more detail than I would have ever thought. Love your patent idea. And the use of machine learning for this project as well as trading algorithms ( would love to see a video on that) Keep up with the great content

[@MarkusNenning]

Thank you very much Colby very much appreciate it! I will try to keep up the content but it’s a challenge:)

[@martinlicht1969]

Nice information, too bad we don't see units running households by now. The power companies have systems beyond belief with advanced synchronous motor-generators but keep us all paying the price. With your expertise, you might build a model home with state of the art dependable, free energy, and show the world and pass that Musk guy with real offerings to the world. Good luck..oh love the 'vibration ideas..actually those were Teslas ideas that Albert stole and bastardized in his role playing act.

[@MarkusNenning]

Totally agree it’s 2022 and all people came up with is Solar and wind? There are hundreds of inverters out there that could come up with something better if they would get the support other research gets. That whole climate task force is just lip service. Nobody is really interested in disrupting the delicate balance. Thanks!

[@best_technician]

Please let us know as soon as you finish it . We really need to know if this thing will work or not. If it's really gonna work I am going to make one.

[@jb-xc4oh]

Dream on.

[@best_technician]

@@jb-xc4oh everything is possible .

[@jb-xc4oh]

@@best_technician Now that's a tall order..!!

[@janengel1985]

AC powering is not good for free energy machines.

[@Iamgroot685]

great efforts. i have also watched those videos send to you by your friends and ive tried to gather what's needed, but you just put it to the test 👍 im sure one day we will find the right equation if balance or mechanical is the problem. if those guys proves it worked, then i imagine what they've been through to make it so. let's keep on trying.

[@MarkusNenning]

Thank you Sammy! I agree this videos can not all be fake. Some invested large amounts of money on their projects and I don’t see any reason why they would claim it works when it doesn’t.

[@trillrifaxegrindor4411]

@@MarkusNenning the reason is always the same.....a fool and their money are soon parted

[@aeroflopper]

@@MarkusNenning views and youtube money, lol bless em.

[@sultanmm2012]

@@MarkusNenning this video shows what you need to modify to make it work. kzbin.info/www/bejne/hnOXqJKcfZmbnck

[@NotTellingYoo]

Bitcoin can do everything metherium can do. Quit shilling meth bro, you are gumming up the process of dethroning the evil money monopoly. All that said, I like your work here in these videos. Bitcoin only, there is no second best.

[@MarkusNenning]

Thanks!

[@boxploy]

vibration or high frequency could help on creating perpetual motion your video was. Great help ps. Bumblebee wings

[@MarkusNenning]

Thank you Car Gon!!

[@ronaldd2154]

kzbin.info/www/bejne/q2PQoXSpoKuCq5Y whilst on the topic here you are. You're welcome. BTW, the inventors 'passed` away.

[@MarkusNenning]

Wow impressive inventor! Wondering if that can be scaled to produce much more power. Thank you Roland!

[@Icecastle12]

What it looks like to me you have 90 lbs of weight in middle..so make the 90 lbs weightless.how you do that is take 2 neodymium magnets put one in hole (wood) other magnet going down that same hole (north vs south) put your weights on top of that magnet(via a bar),,,that will make it weightless..as you know you have to have other parts like wheel bearings ect.I did that before with 50 lbs and it was almost weightless in spinning

[@MarkusNenning]

Thank you! Might be worth a try.

[@lazarivanov8124]

I just have found out in this video: rotor modification is installing magnets to fight the back torque that causes to generator to slow down. Check if out kzbin.info/www/bejne/q4LRfaNua6qSnqc I will keep you posted

[@MarkusNenning]

Very interesting Lazar thanks for sharing!

[@Bishop_warren]

don smith figured it out a while back👈

[@Aetila]

You have to live in India or Pakistan to make this generator work...there they can build such stuff from scrap. 🙂

[@MarkusNenning]

:)

[@stefanovalentini9480]

Goodmorning i living in Florence i saw yours video KZbin about free Energy i ask you of do you sell that i Like to buy that

[@MarkusNenning]

Hi Stefano unfortunately my system does not work. Check out this video this is something that does work kzbin.info/www/bejne/raLFe4p4qdR5g7M

[@specificocean9490]

The motor cant output more than its fed, and the generator cant feed more than its given. The moment you disconnect it from ac power you begin bleeding energy. If your motors make a single noise, or raise in temperature at all from working then it is not perpetual.

[@beraldotaveras152]

Perpetuo NUNCA. Pero movimiento continuo si. Revisa P2020-0205 ONAPI REPÚBLICA DOMINICANA. publicada ya. Un SYNRM diseñado para USAR su Fuerza magnética dos veces en un mismo instante y duplicar-cuadruplicar LA MAGNITUD de esa misma fuerza en ese mismo instante de tiempo. OVERUNITY =20 También el sistema cerrado no conservativo Integra al sistema MOTORIZADOR un generador de potencia electrica con 5 veces la potencia nominal a consumir por el sistema MOTORIZADOR y entrega el 80% de su POTENCIA ELÉCTRICA VERDE generada a cualquier circuito de consumo externo a la central.

[@iguanarchist]

Patents are an archaic concept. Blockchains are helping the future to be open source. Society benefits more from shared ideas.

[@MarkusNenning]

Definitely! Thanks!

[@wasisohandoyo3271]

Make different pully on flyweel.... For 2 generator

[@jumthai]

one day you sit and laugh at yourselves. it is possible to create a generator that runs forever. the laws you learn in school tend to limit your capacity in the superconscious.

[@andyhowlett2231]

OK, let's hear it. Let's see it. Let's hear you explanation of how it is possible. Waiting....

[@karahankarakurt]

Do not unplug your first accelerator motor. THEN plug in 7 other motors to your generator. IT WILL WORK!!!

[@MarkusNenning]

🤔it should Except I don’t have 7 motors :) Thank you Karahan

[@karahankarakurt]

@@MarkusNenning then go for 2 motors :) What I meant is if you don't unplug your accelerator motor, it would keep on going forever. In the end, you imported 1motor power and exported 7motor power. Still, it means free energy, right?

[@MarkusNenning]

@@karahankarakurt yes I did initially plug a motor into the generator output and yes it worked but I had no load on that motor. Assuming 2 would work also :)

[@karahankarakurt]

@@MarkusNenning thank you for your kind response. This is hard to get after all those fake videos 🤗😄

[@MarkusNenning]

@@karahankarakurt thank you as well! I appreciate all the ideas and suggestions from people like yourself. I think collaboration is the best way to make progress in the sustainable energy field. All the best to you!

[@yakoboss]

I think you try to make simple thing hard why add weight and friction when you can have better results with neodymium magnets directly on the alternator

[@MarkusNenning]

Perhaps your right. I am planning on building a smaller generator using neodymium magnets. Thanks

[@niceboy60]

He knows if was successful his life would be at risk Let's face it no oil and Electricity company will let its billion bucks industries slide 🤷🤦

[@MarkusNenning]

Yes that is probably why there are not more publications about any breakthrough sustainability energy inventions.

[@dwayne-7306]

What have seen in some of these videos doing what you're doing that use a Dynamo not a generator a Dynamo will generate power

[@MarkusNenning]

Just purchased a small one. Will work out a smaller version first. Thanks

[@DrHumorous]

There's already a CO2 solution. It's called a tree. Not possible to patent.

[@MarkusNenning]

:)

[@earlvenne6934]

I am wondering how to get free energy from the earth without getting fried. By the way does lighting come from the earth or the sky.

[@MarkusNenning]

Lightning is just an unloading of a potential difference between earth and clouds. And yes not getting fried trying to capture milliseconds of very high voltage is the key 😬😃

[@elsaextrosa8524]

Tanong po kung magkano ang free energy generator paano order thanks

[@kourosh234]

So you are saying there is a way, but you are afraid of big companies, taking your invention?

[@MarkusNenning]

No I am not afraid of big companies:) I am saying the energy sector has no intentions for anyone to come up with “free energy “ So there is hardly any funding for research. But yes I am convinced there is a way.

[@richardmiddleton6835]

Friction and conversion losses ... are not partisan .. Yada yada yada..

[@MarkusNenning]

😃Seinfeld fan? :)

[@scififan698]

Yeah, let's improve it so it still won't work. A ten for effort again!

[@MarkusNenning]

Thanks sci fifan!

[@balancristian9389]

free energy? here is how: 2 solar panels facing each other (with an output of 12V), 1plexiglass at least 10mm tick, REFLECTING PIGMENT, REACTIVE TO LIGHT (Yellow).....paint the plexiglass on both sides with the pigment, put led strip on top and bot of the plexiglass(like backlight of led tv/monitor), put solar panels on the sides and you will get 60-70% for each solar panel max output smart isn't it? 24/24h solar panels producing energy and you don't need batteries to store (only to light the led strip until solar panel produce energy, instantly)

[@MarkusNenning]

Very interesting Christian. Do you happen to have a video of this ? Would be nice to see this setup. Thanks

[@balancristian9389]

@@MarkusNenning I don't have the materials to make it, but it can work, solar panels produce current on yellow light, and of course is not gonna make same energy as Sun light(isn't that bright) but you will have 60-70% for each panel, and led strip doesn't consume that much energy, phosphorus powder reacts to light and it's used in economic light bulbs or in neon light tube to distribute the light constantly

[@dwaynenisbett462]

The generator rotter should be changed to permit magnet instead of an armiter

[@dwaynenisbett462]

Chang router to permit magnet

[@nimmdaszuckerstuck4475]

i would love to the see earthquake maschine :D in 2022 version

[@MarkusNenning]

😃

[@josephcollins7393]

Oh it’s definitely possible

[@augustinas9021]

Hi If use ceramic bearings to reduce friction and different home build generator whit ceramic bearings

[@MarkusNenning]

You have a generator running that uses ceramic low friction bearings Augustinas? You have a video by chance? Thanks!

[@fassphoto]

Hey! Is there a link somewhere for we can buy you a beer?. 🍻😎👍

[@MarkusNenning]

😂no unfortunately not :)

[@bayannijuan2747]

They already develop the technology in the Philippines

[@johncarreon8040]

Pare, Babuhay mga pinoy Live in Chicago, USA 🇺🇸

[@muradbeq3800]

See Dennis Lee free energy from USA and you will have a very good idea

[@MarkusNenning]

Will check him out Thanks! If you have a chance check out my latest video also about an American energy inventor. kzbin.info/www/bejne/raLFe4p4qdR5g7M

[@irfanalikazmi3145]

Can you help me this project starting in Pakistan?

[@MarkusNenning]

You might want to wait for my next video Ali cause it will show you a much better option for a 50kW generator.

[@kingmuheebkhankingmuheebkh1293]

Thank you so much broo I made this energy power machine

[@MarkusNenning]

Thanks! Do you have a video of it by chance?

[@asifalikhan8677]

Your example at start is not looking good ...🤔. Its right pushing a car is hard at start but one question what if an elephant jumps on the car which u r pushing ?? Will it be still easy for you to push that car ... I guess not .. So same without load generator will spin fine and make some voltage but when you put a load on it result will be same as per laws of physics ...

[@MarkusNenning]

Hello Ali, but as I said in the video technically the generator has enough power to power 19 of the motors that I use to turn the flywheel and generator with. And even with your Elefant example once in motion it’s hard to stop.

[@asifalikhan8677]

@@MarkusNenning well this should be calculated that what force is applied and what weight of elephant is to make an impact ... But mark my word ... This concept will remain beating the bushes... Natural laws never changes until the creator of these natural phenomenon want to change them..😉 ... I guess there are many scientist worked on this concept for a century and I am sure they have tried all the possible ways if they can produce free energy with a failure... And also the flywheel is still implemented to store energy ...

[@Jonas_Aa]

You are talking about if the generator has only 40% efficiency it can then only power 7 motors. I agree. But I also think that you know this but that many viewers do not is that to power these 7 motors the generator needs to have physically work input of 19 motors due to the 40%. At least you are not having a hidden cable like other videos so it is more legit.

[@MarkusNenning]

😂I never knew they have hidden cables

[@Jonas_Aa]

@@MarkusNenning This video is a tough one. I thought batteries and inverter in base first, then batteries and inverter in the black motor. But my latest thinking is a cable that has been edited out. There are some frames that might show a cable or at least the frames has been edited. The time where it is most clearly seen is at 12:46 in this video. If you go frame by frame and look between the tables edge and the machine I can at least see a something that looks lika a cable that has been edited out. kzbin.info/www/bejne/jJm1gYx9bK2Yidk

[@djmisterio4334]

Since you mentioned it in this video. You have to be careful what you post. not to post too much of what you do about free energy. If you come out with a solution that works and can come out with a free energy soution just think of who can lose money with this idea that you are trying to come out. It ain't me for sure. Of course someone already came out with all kind of solutions to this problem but I wonder where they at? Just a heads-up buddy.

[@MarkusNenning]

Totally agree. Too much money and powerful people involved.

[@johncarreon8040]

Lets share the knowledge to the people who are building free energy.

[@geraldruzira5119]

Hello, am also in the search of "Free Energy" working set or solution but from the Comments posted it seems we do it at our own risk, I mean if by luck I manage to make a working set this will annoy someone somewhere and my life will be at risk.

[@MarkusNenning]

We can’t worry what other people think of us Gerald or we may never accomplish anything great. Do your thing and give it the best you can and be proud!

[@geraldruzira5119]

@@MarkusNenning Thanks for the encouragement.

[@charlesmasey6815]

thanks for telling me how smart you are;;;;;;;

[@MarkusNenning]

I am not sure if that’s meant sarcastically or not 🤔😂 But thanks! :)

[@swamy8082]

Can I have this Generator. Can u make supply to me

[@MarkusNenning]

It’s still not working

[@d.m.3259]

Wear safety shoes when carrying heavy load!

[@MarkusNenning]

😂thanks for your concern about my safety D.M.! :)

[@DeadpoolandWolverinelover]

can u tell me these compounds name only these moters

[@MarkusNenning]

I have a few links in the description. Thanks

[@archercano]

You look like a Cowboy of the mid 1800’s

[@MarkusNenning]

😂

[@johnmartindale592]

Ya, I don't think that you should give up on it.

[@MarkusNenning]

I am not John. Thank you!

[@3DLasers]

Because the 4th Law of Boredendynamics says that's impossible... 🤣🤣🤣

[@anartofethiopia7898]

Hi, i liked you videos this are more interactive in such a signtificant way of scintifice method, and i wanted to learn also about a machine learning and how do i get started?

[@MarkusNenning]

Thank you very much! There are a lot of videos on machine learning online but best is probably a course or class if you have the chance to take one.

[@anartofethiopia7898]

@@MarkusNenning How can i get one

[@martinsimar5708]

I would like for you to watch a video of a man named Gerard Morin please. It looks like he’s the real deal and I think you could get on his level and understand what he’s doing and if it’s real. Please watch him and comment on it friend. Thanks 🙏

[@MarkusNenning]

I will do that today. Thank you Martin!

[@martinsimar5708]

@@MarkusNenning just checking to see if you watched any of his videos bud. You seem to be a busy man so if not it’s ok but it is a very interesting setup he has. He jumps two 18 volt drill batteries up to 435 volts. He looks legit but I’m not sure lol

[@MarkusNenning]

@@martinsimar5708 hello Martin I did actually watch a few and yes I agree he looks very legit and knowledgeable! I am honored that you think I could come close to what Gerard is doing! But I have to disappoint you :) Gerard Morin seemed to have spend years researching and developing more efficient motors. I wished I was at his level and had the time and dedication required. Thanks again for the suggestion! Much appreciated!