K&N Cold Air Intake Installation - Easy DIY Mod for Power Gains! - (06-10 Charger, Challenger, 300)

[@henryflores6653]

3 years later still the best institutions video thanks men

[@Enju23]

Cold air intake is definitely what I'm looking at doing, mostly because I'm definitely planning on getting an aftermarket exhaust, unsure which one I should go for, but have been leaning heavily on the Borla ATAK cat-back exhaust for the 3.5L V6 Charger, something along with the air intake to help make it roar a bit more than what stock can do

[@SirDankMemesAlot]

Love your videos, Mars. Bought a K/N cold air intake myself a while back for my charger. Finally getting around to doing my own mods. Your video was pretty easy to follow. Hoping it’s not too big of a difference in regards to install. I have the 5.7 L V8 on an 06 charger R/T

[@haroldmiller2643]

Hey thanks for the video and all the videos you make I appreciate it I'm a full Mopar guide 2010 S60 2019 SXT your videos are very informative and I'd like to watch them so thank you again

[@b5beast611]

Great install video. Getting ready to install mine and never thought about disconnecting the negative battery cable. Thanks!👌

[@MarspeedCars]

Thanks! Yeah something that I’ve found helps, even if the car is feeling sluggish sometimes I find it totally resets the adaptives

[@DSWJoyrideProductions]

Nice install! Got to love the gains you can get from some CAI's!

[@MarspeedCars]

I just like the look and sound, power is okay too considering I can do it myself haha

[@haroldmiller2643]

I'm definitely a Mopar person 2010 SXT and a 2019 SXT just had to correct that thank you

[@sspeedy2859]

Your engine seemed to be moving a lot did it need engine mounts?

[@J.Q.lamone9220]

Thx mars you a whole blessing bro this is my next install

[@شاهينكار]

Installation of LED Bulbs

[@MarspeedCars]

They are coming next video 👍🏽

[@alexxx4482]

excellent video I will do the same with my charger, I only have one question what do you do with the hose that you remove at minute 2:21

[@Shewent2008Jared]

I have a 09 challenger 3.5, this looks the same

[@krc1597]

I have the 2.7l and there is a breather hose that connects from OEM filter box to the back of valve cover. I want to upgrade, but not sure where to put this breather hose after doing said upgrade if it even goes anywhere

[@AightBro123]

I might get a Chrysler 300 as a first car next year hemi 5.7 or the 3.5 I heard some people pay less for insurance for the hemi.

[@MarspeedCars]

Not too sure, for me insurance was high either way but more for Hemi, I’d get some quotes online free and easy to do!

[@ryanaverna9494]

You should do a video on Dodge Dart “rareness” by color

[@MarspeedCars]

Cool idea I will see what I can find!

[@mariokarschner989]

I just got a 2006 Dodge Charger with the 3.5 v6 and I want to instal a cold air intake is the link the description the same one you installed because it looks like it’s missing a piece and looks smaller in the link

[@CraftedDiamond10]

I didn't disconnect my battery when I swapped mine? I still noticed the horsepower difference and what not!

[@MarspeedCars]

You’re probably okay just I’ve heard it helps! If it’s not running rough you don’t really need to though

[@100billpremium]

What's up bro. Because of the power increase from the new CAI, did you have to change and/or re-gap your spark plugs afterward??

[@Aman1244]

Hey great videos man I just got a charger will this work for 2.7L v6 aswell ?

[@Aman1244]

@LaShawna Lakota nice has it improved in pick up or speed ? Does it make a difference ? How is it on gas now

[@Aman1244]

@LaShawna Lakota that’s awesome!!! What brand air intake did you buy? K&n? Has it improved pick up abit ?

[@BiggusJakeus]

I really want to do this to my 2.7 Magnum, and my dad is a mechanic...if only we were speaking

[@BiggusJakeus]

@LaShawna Lakota is it worth it though?

[@wildtxboy]

Thanks dude

[@zeowolfpup4802]

Question what do i do with them other hose that is connected to the air box?

[@jairoallday]

Have you tried the AEM Air Intake?

[@trains4dayz]

Do you know where I can buy the heat shield and bracket separately? More importantly the bracket because my filter didn't come with either part so I cannot install without the bracket. I bought the filter used so that is why it didn't come with the parts btw.

[@trains4dayz]

The part shown at 2:54

[@svetlanasvetlacy9581]

Dodge should have recalled all these stock airboxes. If you drive through a deep puddle you destroy your engine.

[@elainecrutcher674]

Question. I have a 2011 CHARGER. And I had to change my thermostat because of the check engine light came on. But, my temp is not going back to the original temp like it was. I have read saying the engine is ok if it gets up to 220. But, it use to be around 189-200 before I changed the thermostat. What can I do to get it back to that range because it won't get back to that temp. It just stays in the 200+ range.

[@elainecrutcher674]

Bailey Hatfield, thank you for that info

[@MarspeedCars]

Not too knowledgeable on the thermostat stuff sorry! Bailey had a good answer though

[@elainecrutcher674]

Marspeed, ok. I have a problem. I just broke my driver's power window switch on my 2011 Charger. And I'm looking up to buy a new one. But, it keeps on bringing up a Dodge Ram. Is that power window switch compatible with my Charger? It looks just like it. Please. I need some help

elaine go to autozone or a dodge dealer or amazon you can also google the part number and it will show everything it fits

[@elainecrutcher674]

JDM A'F, all of them was giving me the wrong part. They never did ask what side. They just assumed the passengers door. Have to go to the junk yard and see if I can find one. Thanks for the advice 👍

[@Willpunk1985]

I have 2010 v6 and I have this issue that sometimes when I switch on, it takes a long time to start, it happens like once every 5 times.. The battery is in good condition, I've been told is a sensor that gives me the problem but I don't really know what's going on, does it happen to you?.. Thanks for your videos bro.

[@MarspeedCars]

Hey bro sorry to hear, I’ve never heard of that before, could it be a starter problem? Could even be a key fob problem? Not sure though

[@xxasapxx99]

@WillOliver I had this same problem on my 2009 v6. It is a sensor called the Camshaft sensor, about $40 at napa. It’s held in by a 10mm, super easy to switch out and solves the problem right away. hope that helps

[@xxasapxx99]

here is the part www.napacanada.com/en/p/IUNCSS1287

[@tylersims2495]

What about the rest of the factory air box underneath? Do you leave that hole open?

[@MarspeedCars]

Yes just left it as is

[@leroycolejr6336]

the thing that I hate about v6 Dodge is the first thing that will go out is the transmission and that is 4 grand without labor

[@FIVEOFEVER]

Just buy a K&N air filter for the stock airbox...I'll do about the same thing

[@BreakingNVain]

Definitely not the sound.

[@davidbiviano2182]

Where can I get the air temp sensor???

[@vilhelmarnros9367]

Does anyone know if this also works with the v6 2.7L motor?

[@BiggusJakeus]

I have a SE Magnum and would like to know

[@NaturalSpliffs]

Hey did u ever install one ? I have the dodge charger with a 2.7 v6 thinking about buying one

[@شاهينكار]

👍🏻👍🏻👍🏻

[@dexterslaboratory2404]

Is it really bad for your car to have a cold air intake

[@mohammedsaleh9190]

What the size ?

[@BreakingNVain]

Anyone have an AEM intake on their 3.5L? I don't care for the oil on K&N.

[@rustypliers74]

How are you doing

[@MarspeedCars]

Good bro hbu?

[@rustypliers74]

Marspeed great

[@michaelz5692]

Next install, larger throttle body 😁

[@AightBro123]

Mike Z it could be a good excuse for a ecu tune since bigger throttle bodies need one 🙂

[@MarspeedCars]

To upgrade or keep modding, that is the question 😂

[@ryanaverna9494]

Why not mopar

[@CraftedDiamond10]

ryan averna mopar intake wasn't in production for the 3.5L V6

[@MarspeedCars]

Yeah I believe there was just one for the V8s not the V6s from 2006-10

[@kevo4515]

Would 57-1544 fit on a 2008 charger?

[@100billpremium]

What's up bro. Because of the power increase from the new CAI, did you have to change and/or re-gap your spark plugs afterward??

[@100billpremium]

What's up bro. Because of the power increase from the new CAI, did you have to change and/or re-gap your spark plugs afterward??