DIY MAZDA 3 Light Bulb Aircon Ventilation Unit

[@jaysirivan8582]

Man this video helped me so much.really appreciate it. Before this video I was stuck trying to force out the entire control panel, unhooking the control cables is what did the trick. Whew!

[@chloeleedow7250]

Thanks bud and grateful it's hot us or Canadian model so we evetthing is on the same side lol. No offence to all the guys that have great videos using North America bk mazdas your help has been invaluable, think I'm just a little.... Silly when it comes to following things on the reverse side 😂

[@ZvonimirAnn]

Download the video and in one of million APPs make it suit your self. Some like it up side down. Thats the reason why we live "down under" 🤪

[@chloeleedow7250]

Ps even though seems like a lot to take out these cars are new enough that evetthing comes out easily just like a jigsaw puzzle but it's knowing the order and any clip positions that will help you not break expensive plastics 😉

[@raulledesma5833]

Nice

[@OnixFang]

Thanks!! I needed to know how to remove/install the manual wires! The technician didn't put them back and claims he "didn't touch the wiring" 😑

[@chloeleedow7250]

Hard to find honesty anywhere now bro. Hidden camera is my trick lol and just have a sticker like ubers saying if you hop in this vehicle you consent to being recorded if they don't pay attention to little details they won't see the sticker anyway 🤣

[@emiliojosemedinarosado5503]

Your car is very clean in there . When I removed my plastics, it was all dusty .

[@ZvonimirAnn]

I gues it's location, we have lots of sand no dust...

[@michalsikorski6853]

U mnie jedna z tych blaszek od drutu temperatury nawiewu jest założona pod tym białym plastikiem pod spodem panelu. Nie da się przez to tego wymienić bo nie widać czy udało się szczypcami złapać blaszkę

[@mykhailomoldovanov8463]

Thanks a lot.

[@jeremiahbonifacio1426]

What type of bulb is it?

[@symbolicheresy]

Lots of work for a tiny bulb.. having this issue right now.. 😐

[@lanternnnnn]

Hey mate just wondering what model is the bulb and where did you purchase it? Thanks

[@ZvonimirAnn]

@@lanternnnnn 2w plun and twist bulb, purchased in car parts shop.

[@amith4183]

Thanks so much for this! It really helped!

[@ZvonimirAnn]

No worries mate.

[@anthonylaurenmendoza3537]

What type of bulb does it use and is it possible to remoce the orange accent on the knobs

[@ZvonimirAnn]

can be done, but to much work. must remove all orange transparent plastic and install optical fiber and LED color you like.

[@willgibson3318]

bp4k-61-c95

[@michaelwhite8493]

Thank you

[@liang2512]

Do these lights have a fuse?

[@ZvonimirAnn]

Yes sharing fuse for (position light / side lights indicator /parking lights) or what ever you call them. Every place call it different...

[@oilyaoona9093]

Thanks so much

[@ZvonimirAnn]

No worries...

[@gugaguga7766]

Legendo, koja sijalica ide tu ?

[@ZvonimirAnn]

T4 12V Car Auto Interior Instrument Light Bulbs Dashboard Lamps

[@connielicious8887]

hi, subscriber here in philippines, just want to know if it easy to find a job there in croatia for a filipina like me? my boyfriend is from koprivnica 😊 God Bless your family 🤗

[@ZvonimirAnn]

We dont live in cro no longer... Best answer hase your boyfriend. And you can also ask filipino group in cro. Many filipinos working in cro...

[@connielicious8887]

@@ZvonimirAnn okay hvala 🙂

[@leonz1982]

How many bulbs needed replacing? Just the one? And part number?

[@ZvonimirAnn]

In this unit you have 3 bulbs

[@leonz1982]

@@ZvonimirAnn Are these bulb also light up the circulation switch?

[@ZvonimirAnn]

Yes

[@leonz1982]

@@ZvonimirAnn Thanks for confirming. The lights on my A/C Button and Rear Demister button do work, but all the rest are off (dials & circulation switch). I know its rare for all bulbs to go at once, is there a fuse somewhere I should check first before pulling this unit apart?

[@ZvonimirAnn]

All lights should be on one fuse... If half dont work check negative battery contact on that area is it ok

[@Devo1987]

Any one install LED's ? Good / Bad experience ?

[@Killerspieler0815]

what a not so maintenence friendly construction ...

[@chloeleedow7250]

Ok im not a fan or my auto climate control unit all digital and and works on a system where the temp control must get a pulse every time, the brushes or contacts come unto into contact with the points on the pcb board it self and sometimes they wear out of just fall off. Think of some old stereos from the 90s or even early 2000s that had volume controls that weren't actual proper resistive pots and they turned infinitely but if they got dirt or bad contacts they would act heywire and go up instead of down and vice versa lol idiot design just my personal opinion but someone has done a video of how to fix that it's as detailed or even more than this, might even be this guys video too I can't remember, but my lights are fine for now but the heat control takes so many turns to go up or down even worse when it's cold once warm it's pretty normal so hoping it's just dirt and not dry solder joints cos I would not enjoy that even though I can solder but I tiny things not so well. I'd love to do everything in my car blue lights think these sort of globes just use little condom looking socks that change the colour sometimes but that means doing the cluster and even the key barrel and electric window lights and that could be super tedious 😂 thanks for for very detailed video. Fantastic. And I hate my digital controls but I hate cable controls even more they never seem to go back the same for me lol. Although they probably are better as my vents don't seal properly either like the actuator doesn't move far enough in whatever direction it needs to to stop things coming through other events like it does but not completely so for instance I have it on just my feet or footwell it will still come out the main dash vents and the defog vent super annoying as I hate hot air in my face but love it on my feet 😂😂 ok enough rambling take care all. 😊