Inlocuire becuri temperatura si bricheta mazda 3 2004

[@90CHjo]

Nu este nevoie sa fie desfacuta consola de la climazare. Este de ajuns doar sa fie scoasa din consola centrala si apoi prin spatele ei se pot scoate soclurile cu becuri prin invartire cu un patent cu varf lung si mai subtire. Apoi, dupa schimbarea becurilor, se pot pune la loc in acelasi fel. In acest fel este mult mai rapid si mai sigur. Becurile sunt W1,2W.

[@pryky26]

George Grigore da, ai dreptate

[@chirigiu1]

Pryky26 multumesc am inlocuit si eu astazi becurile 3 la panoul climatronic si 1 la scrumiera 1 la bricheta . Multunesc pt video si pt sfat

[@pryky26]

george chirigiu cu placere 👌

[@vladhoro8794]

ce fel de becuri sunt ?sa stiu ce sa comand

[@gideonchitsamba2378]

Thank you very much for your video,i managed to fix my Air con buttons which were not working.

[@bartomiejandrzejewski7671]

Great job dude! Thank you so much for your work! ;)

[@djagoegei18]

OK, I changed the bulbs inside the climate control and all buttons work fine, but the whole rotating wheels (PUSH OFF and temperature control) are moving left and right, up and down, in a circle slightly and I have to apply pressure to control the fan speed. They were tight in place before I disassembled the climate control and I'm pretty sure I didn't break anything when I was taking it apart. How can I keep them in place, so they don't jiggle around?

[@pryky26]

Hy! I had the same problem. I keep try to fitted until it was ok. Check if that metal pins are not broken, mine were.

[@pryky26]

djagoegei18 i.imgur.com/g4QIzeK.jpg

[@djagoegei18]

@@pryky26 Thanks for your answer. One of the metal pins was the reason I disassembled it at first place. It had fallen , so I glued it precisely to where it should be. Both the rotating wheels now jiggle around and it's really frustrating, because sometimes I have to rotate the fan speed wheel 1000 times to make it to work

[@Susuny7201]

thank you for sharing

[@Miomir86]

I was putting back all parts... should screw's from fan and temp be tight or little loose, i screw them tight and cant press them to turn on/off? What i did wrong?

[@pryky26]

at 17:19 watch closely. the text shown there say : "press the button and guide the plastics pins into the holes.

[@Anonymous-ml3yn]

Can this temperature knob be fixed because I'm as stopped working all help much appreciated

[@pryky26]

There are two pins that must be glued

[@razvanmaciuca18razvanmaciu67]

Sal! La unitatea CD dar la modelul mazda BL ce tipuri de led sunt? Mi s au ars ,cred, si vreau sa le inlocuiesc! Multumesc

[@pryky26]

salut. mazda mea e la fratele meu acum, nu mai e a mea. nu pot sa-ti spun exact. vezi daca gasesti pe realoem ce ai nevoie.

[@davidjuhasz98]

I would like to ask what is the exact name of the bulb what you changed it? I have to do it too..

[@pryky26]

T5, not led, because will not dim

[@davidjuhasz98]

pryky26 thank you! I did not think that i will get answer after 3 years.

[@pryky26]

Dávid Juhász mazda is still my love. My brother have it now. Momories never go

[@davidjuhasz98]

pryky26 it is good to hear it. Mazda 3 1.6 gasoline bk is my first love. It is a dream every time when i get into the car😄 i did not disappointed. Im thankful to have it. Anyway i think it is much easer to assemble this car like another. Easy to find something, remove, change and reassemble. Really good car. Really good...

[@janossandor7569]

Szia! Sikerült szétszedned/összeraknod? Nyilván neki, mint gyakorlott, könnyen ment, te hogy boldogultál vele? Nekem is szét kellene kapnom mert a tekerők nem érzékelnek. Szerintem azok a kis réz lapkák el vannak oxidálódva.

[@mljkvc]

Hi, you have same model as i do. All those red bulbs in radio/temperature panel/dashboard are working only from time to time for second or two and then they stop working again... Do you or somebody else maybe know a problem?

[@pryky26]

hi! try to change them, and check for rust on the bulb connenctors. also check if the glovebox and lighter bulbs are working

[@mljkvc]

@@pryky26 Hi i think there is no need to change them because sometimes they start working but then they stop again, i think its some connection issue, do you maybe know why is that happening?

[@pryky26]

@@mljkvc on this video, the lights make like that, because cigarete lighter bulb was burned. glovebox bulb, cigarete bulb and ashtray bulb are connected. check the connections when you open the climate control panel

[@fotografescu]

mulțumesc mult!

[@chirigiu1]

In video sunt 3 becuri rosi in triunghi . Sunt cumva pentru roata stanga ( putere) roata mijloc ( mode ) roata dreapta ( temperatura ) intreb pt ca mie nu se mai lumineaza roata stanga de putere

[@pryky26]

george chirigiu fiecare roata are un bec. poti sa il schimbi fara sa demontezi ca mine. cu un patent cu bot de rata.

[@pryky26]

george chirigiu fiecare roata are un bec. poti sa il schimbi fara sa demontezi ca mine. cu un patent cu bot de rata.

[@pryky26]

george chirigiu fiecare roata are un bec. poti sa il schimbi fara sa demontezi ca mine. cu un patent cu bot de rata.

[@k1ngfather]

Una pregunta el boton de la luz de emergencia enciende? Osea cuando le das parpadea la luz d emergencia ... se puede cambiar? O vienen asi...

[@coecekajtebriga9797]

my plate was greasy from some grease. you can tell me what cream it is?

[@pryky26]

Idk, i think is for smooth process, i just put normal grease( vaseline)

[@coecekajtebriga9797]

@@pryky26 tnx . i changed all bulbs thanks to your video. it was easy thanks to you

[@chirigiu1]

Daca mai faci ceva pt mazda 3 pune sa mai invat si eu :)

[@pryky26]

Salut! Masina este la fratele meu acum, eu sunt plecat din tara si am luat alta masina

[@chirigiu1]

Multumesc

[@Tish0eX]

Hey one question about the cable thought ashtray. Is that AUX jack? If yes how did you manage becouse i saw you are with type/md button and i read we can't use aux mod on this audio system.

[@pryky26]

Tihomir Dimitrov Hy. i have an xcarlink ipod interface, and the aux cable is from there

[@Tish0eX]

Thanks mate! Can you share link or witch model ?

[@pryky26]

Tihomir Dimitrov hy! the xcarlink has a pitch noise sound when i turn the lights on, i think is common problem. i oredered a new interface, yatour bluetooth car adapter, but i'am waitting to get it from us.

[@Tish0eX]

i was thinking to order something cheap like goo.gl/G5d0Bz but i don't think it will be very good :) share your opinion when you receive yours

[@pryky26]

Tihomir Dimitrov you will get the same noise when you turn on lights. i have read it about this interface you show me. on 15 percent on volume you will get the pitch noise sound in car. ia have try anothe method to listen music on xcarlink without much pitch noise by listen flac music.

[@brandanfiederlein3390]

hey what language is the video, cheers?

[@pryky26]

romanian.

[@tuncayozturk8951]

@@pryky26 yaparken birden klimanın elektiriği gitti neden olabilir

[@razvanmaciuca18razvanmaciu67]

Ce leduri sunt?? La alea rosii ma refer?!!

[@pryky26]

t5

[@razvan43]

Salut,am o problema cu butonul de OFF, nu se opreste ventilatorul cand il apas. In momentul cand pornesc motorul automat porneste si ventilatorul. Oare de la ce poate fi?

[@pryky26]

salut. sa nu ai un contact imperfect. scoate butonul curata placa si vezi. incearca si cu alt buton. ca la telecomanda de la tv

[@razvan43]

pryky26 multumesc de sfat si raspuns.O sa incerc si revin.

[@vasiciurus1143]

Salut! Care a fost rezolvarea pentru celalalt videoclip Cu problema la lumini??

[@pryky26]

Salut! daca te referi la pomul de craciun, sunt de verificat becurile din torpedou si bricheta.

[@vasiciurus1143]

@@pryky26 da, la ala ma refeream! Mulțumesc!

[@D.Gidikov]

hello, i think i have a missing cable or something. There is nowhere to connect the cable from the screen and my lcd display is not working. Can someone help me with link to show me what else i should buy to display the clock, air condition etc.

[@pryky26]

hy! sorry for delay! at 4:05 you can see 3 cables, one is antena, one for xcarlink, and main for audio unit.

[@catalinmanoliu3090]

Salut ai idee de ce ramane lumina aprinsa in torpedou dupa ce am schimbat becul ars am observat ca sta aprins tot timpul. Stii cumva daca este swich ul care inchide torpedoul si unde se afla mai exact poate o poza ceva . Pt bricheta am inteles ca becul este T5 dar de cati wati? ca cel de la torpedou este de 1,7w T6.5.

[@pryky26]

Catalin Manoliu salut. am avut si eu aceeasi nedumerire si din cate am inteles nu se stinge. asa ca l-am scos. insa, daca il scoti si ai un bec ars la bricheta, o sa iti faca bordul ca pomul de craciun

[@s1d3k1ckRO]

Salut. În caz că nu ai rezolvat, încearcă să pui un led simplu cu cât mai puține diode (eu am cu 2). Nu am mai avut probleme de atunci.

[@GabyCScorpion]

buna. mufa alba pe care pui mana la 23:02 . ce rol are, ca nu duce nicaieri. se poate pune o priza usb sau ceva pe ea? multumesc

[@GabyCScorpion]

23:05 *

[@pryky26]

Salut! cred ca este un contact. cand ridici capacul de la scrumiera se aprinde becul

[@GabyCScorpion]

nu face nimic...e inconjurat complet de plastic. am vazut intr-un cli similar cu al tau ca il pune la ledul de la bricheta

[@GabyCScorpion]

07:48 in acesta kzbin.info/www/bejne/qoDCqIOurb2WjbM

[@s1d3k1ckRO]

Am masina de cateva luni bune si nu aveam idee ca este bec si pentru bricheta. Presupun ca ilumineaza cercul portocaliu ce incercuieste soclul unde intra bricheta??

[@pryky26]

s1d3k1ckRO Da. este bagat intr-un soclu si partea aia care incercuieste bricheta este atasata de niste clema. sa ai grija cu ele.

[@chirigiu1]

Dar becurile sunt t5 sau 5t si la rotita mare si la scrumiera + bricheta ???

[@pryky26]

george chirigiu T5

[@catalinmanoliu3090]

Salut , stie cineva daca scot radio am cum sa ajung la clapetii care distribuie aerul conditiona ca imi baga aer rece numai pe partea dreapta a bordului, iar pe partea stanga numai ventilatie usoara fara aer rece( mazda 3 1.6 benzina bk)

[@pryky26]

Catalin Manoliu nu mai tin minte sigur, dar parca daca dai partea de sus din mijloc, ce cu butonul de avarie, acolo este.

[@alexandruban9475]

Salut. Imi puteti spune ce tip de bec este cel de la bricheta? Becul de la scrumiera si de la bricheta nu mai functioneaza si as vrea sa le inlocuiesc iar peste tot unde intreb imi cer modelul Am inteles din comentarii ca cel de la scrumiera este t5 . Multumesc frumos

[@pryky26]

Alexandru Ban da, t5 este

[@rolzul]

Salut. Cum ai legat mufa de jack?

[@pryky26]

salut! am avut un xcarlink.

[@Yuhuhuu-o1w]

Salut, am o problema la mazda 3 cele 2 butoane de putere si temperatura numai merg. Oricat invart stanga -dreapta nu se modifica nimic. Imi poti spune ce pot sa fac sa rezolv problema?

[@pryky26]

salut. sunt niste pini lipiti pe buton in interior, au cazut. trebuiesc lipiti

[@pryky26]

14:59

[@ClaudiuB..]

Salut ! Te rog, spune-mi ce bec este cel rosu de la climatizare ? Trebuie sa il schimb .. Cum se numeste ? Multumesc !

[@pryky26]

t5 gasesti la magazin de piese auto

[@ClaudiuB..]

Mersi frumos ! Nu stiam ca e la fel ca acela de la scrumiera

[@chirigiu1]

T5 LE.AM SCHIMBAT SI EU ASTAZI 12.01.19

[@viasutraian1657]

salut! am vazut intr-un alt video de al tau ca aveai o problema cu minile de la ceasuri,adica flashuiau, ai idee de ce? ce ai facut pentru asta? am aceeasi problema si nu stiu ce sa fac,iar electricienii ma amana de pe o saptamana pe alta.

[@pryky26]

Viasu Traian scuze de intarziere, am avut un bec ars de la bricheta, cel care lumineaza bricheta. poti verifica si pe cel din bord

[@vladhoro8794]

nu ne spui ce becuri trebuie sa cumparam ca sa nu desfacem de doua ori consola ? Te rog

[@pryky26]

salut. T5

[@vladhoro8794]

@@pryky26 Merci

[@GeorgePreduca]

Salut, am o mazda 3 1.6 d din 2008 si de cativa ani:) nu se mai incuie usile din telecomanda, si cu cheia direct se incuie doar doua. Tot de vreo 2 ani face un bip ca si cum as avea farurile aprinse cand scot deschid usa si uneori palpiie luminile din bord. A devenit insuportabil, mai ales bipul prelung. Ce zici? ma poti ajuta cumva? Iti multumesc!

[@pryky26]

GeorgePreduca salut. luminile fac ca aici? kzbin.info/www/bejne/gZqaaoR9nah_Z80. verifica sigurante. daca luminile fac ca il clip, ai un bec ars pe unul din cele 2, de la bricheta, sau de la torpedou

[@GeorgePreduca]

Da, asa fac luminile. iti multumesc.

[@GeorgePreduca]

Erau ambele arse, acum nu se mai aude bipul nenorocit si nici bordul nu mai face ca de craciun. iti multumesc!

[@pryky26]

cu placere.

[@Vladevi]

Salut ! Am si eu aceeasi problema pe care vad ca o au destui de multi aici. Mie nu imi merge deloc butonul cu care invatat sa reglez intensitatea ac-ului. Cel pentru temperatura abia merge, trebuie sa rostesc foarte mult de el ca sa urce 0.5 grade. Crezi ca este cineva care il poate repara in bucuresti ? Sau trebuie sa schimb butoanele ? Imi poti spune de unde pot cumpara ? E destul de enervanta problema.. Multumesc si astept raspuns !

[@pryky26]

salut. citeste comentariul lui spectre aici.

[@Vladevi]

@@pryky26 mersi! E foarte util videoclipul.

[@teodorlibotean9930]

Salut, cum ai rezolvat problema cu rotita care nu merge ?

[@fotografescu]

Salutare. Ce tip de bec este cel ce ilumineaza interiorul scrumierei? Stii de unde se pot cumpara? Multumesc

[@pryky26]

Fotografescu George salut. la magazinele de piese auto se gasesc. denumirea este de t5 din cate imi aduc aminte. e undeva la doi lei. insa se ard cam repede. poate gasesti cu led, insa nu stiu daca sunt dimabile

[@tuncayozturk8951]

@@pryky26 merhaba video ya göre uyguladım. Klimanın birden elektriği gitti hiç çalışmıyor sigortayamı zarar verdim acaba

[@pryky26]

@@tuncayozturk8951 check the fuse. i don't have the car anymore

[@m_yazc5167]

Merhaba, Push off ve Push Auto tuşları boşa dönüyor. Klima ayarlanmıyor. Ne yapabilirim teşekkür

[@pryky26]

hi! under the buttons, on the circuit board, there are pins , maybe they fall off. try to fix

[@pryky26]

10;27 in video. you have the pins

[@m_yazc5167]

@@pryky26 Two of the pins are out. I reinstalled it instead. Now I'm having a hard time putting the buttons back in. Is there anything I should pay attention to?

[@m_yazc5167]

@@pryky26 video ın 17:50

[@pryky26]

@@m_yazc5167 you need tu find the correct position. follow the video

[@mihalachemarius1937]

Salut. Ma numesc marius am o problema la o mazda 3 exact cum ai avut si tu imi palpaie luminile in bord

[@pryky26]

Mihalache Marius Salut. vezi ce becuri nu iti merg. bricheta si torpedou

[@Gugi89]

My temperature knob is stuck at 29C how to fix this shit???????

[@pryky26]

follow the video, and check if pins are fall off

[@mihalachemarius1937]

Mi-ai putea da un numar de telefon sau sa imi spui cum ai rezolvat problema

[@Stl71]

Maybe someone could write in english what exactly he is doing. Thank you.

[@pryky26]

Hi! Sorry. At that time i didn’t think to write in english. It’s about changing the bulbs for temperature and lighter.

[@Stl71]

@@pryky26 OK, I thought you were trying to fix something...I have problems with the air regulator, when air conditioner is on. Sometimes it goes off and on. Can that be repaired or should I change the whole console? Thanks again.

[@pryky26]

Larsoti check at 14:59 if those pins are broken.

[@Shajdy]

@@Stl71 it also can be low on freon, which will cause it to go off

[@kenny-techsolutions7647]

my aircon comes on whenever I start the car

[@pryky26]

maybe it's blocked. open the console

[@bradenmaurer8024]

Can someone translate what is going on?

[@pryky26]

Changing some bulbs

[@jeremyreagan4734]

Via con dios