Massey Ferguson 130 Lighting system

Hi all,
I get asked quite often about how i done my MF130s lights so in this video im going to explain how i wired them up
please rate, comment and subscribe
enjoy

[@TheDavidcrockett]

Awesome job my friend!, its the best feeling to stand back and admire the finished product. Thanks again for helping me with my 25 SNMY hydralics in Canada. Looking forward to next video.

[@tractionengine11]

Ahh thank you mate, Yeah it is a good feeling. Anytime i'm glad i could of been of help

[@mmxflorinleuinfinite8854]

Super

[@moffenvetas7805]

Hello, do you have a video about when you changed the brakes on your massey ferguson 130???I have a 1966 model myself that I am in the process of fixing up

[@nenadristic5871]

Veliki pozdrav..imam isti ovakav MF..Ali me strasno muci anaser...dali kojim slucajem znate od cega bi mogao anaser od kog drugog vozila..hvala...

[@SimonRoyal-f6x]

Hi, Is the Constant wire for the Plough Lamp a totally separate wire and where does this constant wire originate from, thanks

[@tractionengine11]

@@SimonRoyal-f6x yes it’s a separate wire, the constant live is from the power to the light switch. The power to the light switch is from the constant live on the ignition switch

[@nomisixela]

Thank you, that helps a lot, Many thanks

[@bbartonok]

Can you please post links to your parts? I am specifically looking for the braided cable.

[@tractionengine11]

Hello, I obtained the cable and fittings from Tim hodgekiss at vintage motor spares

[@edhothersall3330]

Excellent video, I’m just copying you on my MF 35, question do you put a live wire on each of the 1,2,3, & 4 terminals on the twist control switch? Cheers

[@tractionengine11]

Thank you, No there should be a live in terminal on the switch which then gives a live connection to 1,2,3&4 terminals using just the one connection/wire

[@edhothersall3330]

tractionengine11 - Thanks for the message, terminals 1,2 & 3 are doubles and 4 is a single. That’s all I’ve got on the switch.

[@tractionengine11]

4 should be the power in Terminals 1. Side light 2. Headlight dipped 3. Headlight main beam

[@edhothersall3330]

tractionengine11 - Thanks ever so much I’ll let you know, keep up the good work!

[@edhothersall3330]

One final question my headlights have a black red and white wire I’m guessing neutral - live and dipped beam

[@fiatmad-kp9hk]

Hi how did u wire the lights on switch was it a live and negative wire or both live

[@tractionengine11]

I used a constant love from the ignition switch then connected the live wires up of each set of lights to the terminals on the switch

[@jacksonelder977]

Hi great job on the 130 can you help as I have a 130 and looking for headlights .

[@tractionengine11]

Hello Thank you very much ABL lights sell the headlights but can be hard to get off them There listed on their product page of the website

[@tractionengine11]

The part number for the lights is 172 H4

[@jacksonelder977]

Thanks a lot I will contact them.

[@davidh266]

How do you replace light twist switch

[@tractionengine11]

There should be a hole in the side of the plastic knob which you push in and remove then it’s just a nut to undo and it pulls out from behind the dashboard The other type fitted had a flat headed screw in the plastic knob which you undo and pull off then you need to remove the locking nut behind and remove from the back of the dashboard like in the first example

[@RasheedKhan-dt3we]

Kimat kitni hai

[@josipbanic2448]

Imam istog ako koga zanima 0977201413 Stanje odlicno

[@bardhsylaj4564]

Koliko je cena..?