Massey Ferguson 165 Super-Duper 10 minute oil change!

Can I get my maintenance done in 10 minutes? I’ll bet I can 😆

[@arthurnelson9790]

A nother great job thanks for letting us watch..👍

[@thepubliceye]

Massey Ferguson is the largest tractor manufacture in the world.

[@tonybunch543]

Nice 165. First Massey I ever drove.

[@juanballesteros9472]

Hey jt.you do the best preventive maintenance to your equipment, good job man,, keep it up!!

[@jtsbarnngrill6873]

Thanks! Will do!

[@gleanerk]

Those upside down o ring can be aggravating. Tell your assistant, they done a great job!

[@jtsbarnngrill6873]

She says thank you!

[@vernegriffis5457]

Thanks JT. Good to see you, nice job.

[@lukeduffy2158]

Great video JT.👌👌👌

[@stanleydeden3603]

Great improvement in the sound!

[@jtsbarnngrill6873]

Thanks!

[@mikespecht]

Next year I expect the oil change to be faster. Nice video.

[@narisse89]

I know the feeling it's been raining here for 3 weeks Lincolnshire England

[@corydriver7634]

I was stationed in your beautiful country for 2 1/2 years back in the 80s, it only ever doesn’t rain 2 weeks a year.😂

[@johnsweeney1712]

Great video. I’d be wearing mechanics gloves and throwing a bit of cardboard on the ground, but other than that I’d be doing the same as you. Call it a 10 minute oil & filter change… the grease & air filter service took 2 minutes. Keep up the good work.

[@jtsbarnngrill6873]

Thanks 😉

[@CircleTFarms419]

Great job, I think you made Carl real proud , I bet Doyle would approve too, if he was still here 😂

[@jtsbarnngrill6873]

That was my intention 😆😆

[@randybennett5417]

You done did good.

[@ShainAndrews]

Hot damn... he got a remote mic. We're movin up in the world.

[@tmwinkler]

You have a dedicated camera operator! Awesome! (side note: can you post the WIX filters you used on the MF 1100? I couldn't catch all of the numbers on your video.)

[@johnwesner3935]

Well JT, I did a ten minute oil change on one of my jeeps two weeks ago. I had about ten minutes and I knew I could easily get-r done!:) Dropped the oil, spun off the filter, spun on the new filter and firmly tightened, threw the plug back in the pan and dumped five quarts of Pennsylvania oil down the pipe! Bamm! Started her up and dumped two quarts of oil on the floor?:😢 The rubber seal on the new filter fell out of the groove when I was spinning it on. Never had that happen before!😮 30 minutes of oil cleanup and another trip to NAPA to get more oil! Every time I go in the shop that oil stain reminds me what an idiot I am.

[@jtsbarnngrill6873]

Been there! I had one do the same thing about 15 years ago. Pumped 3 quarts on my driveway RIGHT NOW!!! 😆. Lessons learned lol

[@cesargallo7424]

As simple as this is, many people still don't change the oil! Good job JT

[@270skipscheepers7]

Tip of the day to some. Turn your oil can so that the opening is on top when you pour in oil, then slowly turn the opening sideways as the oil decreases. That way air flows easily into the can and you have a steady oil flow instead of a flop flop flop. I also saw that some people do the same with the 20l or 5 gal. cans. Someone stated, and showed it, that you have to put a hole in the lid using a screwdriver for a steady flow. No criticism intended.

[@jtsbarnngrill6873]

None taken! That is good advise, I’ve done that with a 5 gallon before. Works much better than glug glug glug 😆

[@prevost8686]

JT you forgot to upsell the customer wiper blades, power steering flush and a/c performance inspection. Y’all going to lose the shop for sure just doing oil changes.👍

[@jtsbarnngrill6873]

😆. Couldn’t get the customer to bite..

[@windyhill10]

Awesome work young fella and great job by miss JT on the camera. Only thing I can think of that you forgot was checking the water in the radiator.

[@northdakotaham1752]

Miss Junior JT did a nice job on the camera didn't she? To be fair, JT did alot more work in ten minutes than just changing oil.

[@ACF6180T]

Great video, & I had some lol moments. The last video I watched was You driving the GMC hauling some grain. Love the M-F hat; I have a few, But not a black & white one. That M-F 165 is a sweet machine, & the access panel for the air filter is way to cool. Nice touch at the end of the video with Carl C. That man is a genius .

[@jtsbarnngrill6873]

Right on! Hoping to take the 165 completely down in the future for a complete paint restoration

[@ACF6180T]

@@jtsbarnngrill6873Sounds good; I'm planing the same with my 59 M-F 50 gasoline hopefully late spring; She's a working tractor so I'm hoping to give her some down time then, & just do a nice rattle can paint job; Just make her look better. She'll always be a working tractor. The plan is to put more choirs on the newer 2018 M-F 1526; during late spring into early fall. The only thing I need to get for the M-F 50 is a few new gauges. I have everything else; Decals, Paint, & I just put on a new seat cushion with a back rest. I don't mean to go on about the 50, But it is the 1st tractor I have ever owned, & that has been for 26 years.Stella deserve it.

[@trentonromig9765]

Love it bud

[@teresadroessler9872]

I use my pocket knife to get old o ring out just stab into the middle of the o ring, thanks for the great video

[@America-First2024]

Smooth!

[@Fieldman12]

That was quick. On our 165 Diesel we bought the adapter kit off eBay to convert ours to a spin on oil filter. It works great. Not sure if they make a kit for the gas model or not.

[@ACF6180T]

While the spin on is convenient; They are more prone to puncture; Than a canister filter.

[@Rudy_316]

My grandfather has a Massey Ferguson 165 over fifty years and that's why I'm working on it

[@Rudy_316]

In Kurdistan, I greet you

[@jtsbarnngrill6873]

Nice to meet you!

[@markwegner4639]

Shouldn't use high pressure air on an air filter. Can tear tiny holes and let the bad stuff thru. Tap it off and when that doesn't work, replace it.

[@adrianchetwynd1334]

If you'd had the seal pick at the ready and poured the oil from the top of the container, you'd have done it in well less than 10.

[@jeffhack6839]

WHOA!!! Watch how y'all toss that bracket from the air filter on to that nicely painted Hood!!! BTW whom is doing the camara work? Cheers.

[@jtsbarnngrill6873]

Miss junior JT was nice enough to help dad today 😉

[@shaynemilani1858]

What about the fuel filter

[@tj.farmer3905]

Well done 👍😂😃😃

[@andywilkinson3792]

J.t would like to come over to the UK and put new cluch and brakes on my diesel 165. 😂. Bin needing for about 5 years. L.o.l.

[@jtsbarnngrill6873]

On my way 😉

[@andywilkinson3792]

@jtsbarnngrill6873 that's great. I got two grey Fergus wich need bit work to. L.o.l. great video

[@HighWaterFarm]

Is that Mrs. JT’s barn and grill holding the camera?

[@jtsbarnngrill6873]

That’s miss junior JT. Had to rope her into helping dad today!

[@kenmazer9481]

👍🏻👍🏻

[@carrottopfarm9037]

Great content!!! What size wheels and tires are on the front of your 165?

[@jtsbarnngrill6873]

That has 11L-15 on it

[@whathasxgottodowithit3919.]

Nice try, no cigar, you didnt really have your Ducks in a row before you started. Good idea to fill the filter housing with oil prior to installation

[@nellsonstout7001]

Hey if you didn’t get pics of that Deutz powered Bearcat yet, let me know how you want them

[@jtsbarnngrill6873]

I didn’t see them yet. My email is [e-mail]. I appreciate it!

[@nellsonstout7001]

@@jtsbarnngrill6873trying not to get KZbin’s anti spam on me, but my email has my last name at the beginning. God knows establishing contact with the owner could’ve been easier

[@nellsonstout7001]

@@jtsbarnngrill6873check it now. I also gave an explanation of what we know.

[@jtsbarnngrill6873]

Thank you thank you!! That machine definitely looks like a deutz-cat! Almost like they made the 4366 series look like a international-cat lol

[@nellsonstout7001]

@@jtsbarnngrill6873I can’t help but think that it’d be a great, reliable tractor. I think it was farmed with for quite some time actually. No one really likes V8s but I’ve never heard a bad word spoken about the Deutz V8s.

[@briannelson4493]

JT did you remember to get grease on the seat . That seems to happen sometimes, I haven’t figured that out yet. Enjoy your weekend

[@jtsbarnngrill6873]

Well, I got grease on my pants and sat in the seat. Same but different 😆

[@MabGrego]

what sthe beige marlboro thing at the back of the shop, its odd shaped to be just a sign.

[@jtsbarnngrill6873]

That’s an old counter topper from a party store I worked at in high school in the early 90s. The cigs were still 219 a pack an that 😆

[@debigardner4276]

Could you tell me why some 165 Massey tractors stand a little taller than the smallest stance that your see on most of the regular high. Tractors . I not talking about the high clearance tall tractor's that were designed for the vgatgatable jijgj clearance versionns.

[@jtsbarnngrill6873]

My 165 is a row crop version. Has the 15.5-38 rear tires and taller spindles. The shorter ones are the standard and had 13.6 or 14.9-28 tires and shorter spindles.

[@660r2003]

hows that wobble issue? still better since the fix last year?

[@jtsbarnngrill6873]

Straight as an arrow! Seems to be working perfectly!

[@Bob-bz5kb]

why don't you change it to a spin on filter?

[@jtsbarnngrill6873]

It’s really not a huge deal to me, this setup works fine, and it only gets changed once a year

[@northdakotaham1752]

"Cmon you!"....ha! My grandfather always used to say that! He was Norwegian. Are you Norwegian JT?

[@jtsbarnngrill6873]

Ha! I am not… but I’ll take that saying lol

[@northdakotaham1752]

@@jtsbarnngrill6873 I've gottten into the habit of saying the same thing! When the tractor engine spins but doeesn't fire, when the cultivator plugs up with straw, when the combine starts bogging down due a partially plugged fuel filter....."Cmon You!" always makes me feel better!

[@waynemclachlan6480]

Slippery little sucker that oil 🛢 canister 😅...think they call that ( splash and grab )

[@kentcostello5286]

When I do that my wife tells me do something else haftway to do something else.

[@jimjam894]

That 165 looks bigger than my 165 is the engine a 212

[@jtsbarnngrill6873]

Yes, the A4G-212 Perkins.

[@jimjam894]

@@jtsbarnngrill6873 looks way bigger than mine must be the wheels

[@jgscs61]

When you get a tractors like this with diesel engines, is easy add more power, just need convert the diesel pump and injectors from A212 to A236 and trust me, you can get 15 horse power more and also to A248 same engine same parts, best Perkins engines in the entire world 💪🏿💪🏿🐇