Massey Ferguson 65 # 16 Removing the Cylinder Head

I remove the Perkins 4.203 engine cylinder head as I start on the engine of the MF65
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advice to customers.
Parts seen in our videos can be purchased from www.queenslandt...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email [e-mail] and we will help where we can.
I do try and help with technical advice at [e-mail] if you have a question or are having trouble with your project.
#mf65, #bundybearsshed, #tractorrestoration, #tractorrepair, #tractorrepairing, #masseyferguson, #masseyfergusontractors, #masseytractorvideo, #massey_tractor

[@Redhackle]

Thank you for helping people like me that have no real mechanical abilities but want to.

[@BundyBearsShed]

Happy to help.

[@WildAtlanticWayCoast]

Thanks Lance , Great series of videos on the MF65.

[@BundyBearsShed]

Glad you like them! More to come.

[@michaeluk2567]

Excellent Lance, as ever, thank you. You've already got your head & hands full, between camera juggling, dropping tools & narrating the work - but if you could mention any relevant mechanical differences to 65 Mk1, that would be really helpful. Many thanks, gagging for the next instalment!

[@BundyBearsShed]

Ill see what I can do.

[@luzbelito1977]

Thank you very much Lance! I'm saving this entire playlist as what it is: a real treasure. Thank you for sharing!

[@BundyBearsShed]

Glad you enjoyed it!

[@charleshart6992]

Excellent video Lance - glad to be back on the 65!!

[@BundyBearsShed]

Me too!

[@kevinpfaff2301]

i like to watch and learn how this works. Thank you, Lance.

[@BundyBearsShed]

My pleasure!

[@Ckktopa]

Thanks for sharing your knowledge Lance!

[@BundyBearsShed]

My pleasure!

[@philiphopkins1779]

Hi Lance, Keep up the good work. I learn from you most days, and have just purchased a MF65 project. I have asked you a question on email.

[@BundyBearsShed]

Thanks I just sent an answer through.

[@tridbant]

You did a good job at cleaning the engine. You’ll have to come and show me how you did it by cleaning mine.

[@BundyBearsShed]

Just degrease and pressure wash.

[@tjohnson9051]

When starting a new video, always drop something to make sure gravity is still working. I drop quite a few things and the stay there until I have to get the grabber and pick them up. I can't reach the floor because my back is fused. Many times I drop the grabber too so then I have to go and find another one. If I made a video, have of it would show me picking stuff up.😄

[@BundyBearsShed]

Thats how you know it is one of my videos, I drop things, lol.

[@glockky1]

How do you go about cleaning the water jackets up good?

[@BundyBearsShed]

Pressure cleaning mainly but if I have a stubborn one I take it to town and get it hot tubbed.

[@philipstubbs2432]

Good old FBH's 😁 out of curiosity adjustment of valves? How often in as an example over 5000 hours should they be done ? Or if it rattling leave alone ? Great video again 👏

[@BundyBearsShed]

Back in the day we would do them at 500 hrs but as oils got better and things changed most manufacturers went to 1000 hrs. When I was with David Brown we would check injector pressures at 500hrs as well but that doesnt happen any more.

[@Masseyferguson65]

My mf 65 have early on last week diesel inside engine oil ...problem is fixed now .. and I Think that no damage to it ... but there is ...pistol rings crack now and I must shift all pistol and liner now .. so you Think its possible to shift it with the front stil on ??? Lower the bottom pan and shift liners or must I remove front to do it ??? Thanks so much Lance for your Help and support and video's. Michell . Norway 👍😊😊🚜🚜

[@BundyBearsShed]

Remove the front may be easier but in my sump video coming out tomorrow I talk about that.

[@Masseyferguson65]

Thanks a lot Lance 😊👍one last .. do you think/ Know if the engine can stay on bellhousing with a stand under and engine just hanging there with no front ?? I am thinking that I shift 1 cylinder at a time before move to next One.. is it a possible Eat to do it .. Thanks so much Michell. NORWAY 😊👍🚜

[@lesthompson5907]

cold wetter star desal sprat start in to heater . les england

[@BundyBearsShed]

We dont need that here, we barely use the manifold heaters unless it is way down south of the country.

[@noelstractors-firewood57]

Boy your gunna be in trouble with your wife when you go home with hands like that. Hehe When you took the head bolts out, should you follow the tightening sequence when loosening the head bolts. Or does it matter. Great video. Thanks.

[@BundyBearsShed]

I dont think it matters at all really as we are not trying to flatten the head as yet.

[@Peter-Southern-Victoria-Aust]

It sounds like that engine might have had a runaway with it revving like it did, I've seen some on KZbin and if they suck engine oil into the engine they go off like a rocket and completely destroy the engine.

[@BundyBearsShed]

Time will tell I suppose, hopefully this weekend Ill get more of it apart.

[@whathasxgottodowithit3919.]

I know you are little old school Lance, however its never too late to wear some gloves, all that oil & crap is not good for the skin in the long term.

[@BundyBearsShed]

You are correct, next vid I have them on but Im not keen on them, not as much feel.

[@jefftheaussie2225]

I never saw or heard of anyone wearing gloves to work in till I went to Canada 40 years ago. I thought they must have been a bit wimpy. I still don’t wear them unless there is barbed wire about. You can always tell an Australian farmer by his hands, he doesn’t look like some soft city bloke. Jeff