Master Tech Evaluates the FLOOD DAMAGE on my Corvette (can it be Saved?)

Master Tech evaluates the FLOOD DAMAGE on my Corvette (can it be Saved?)
#chevy #corvette #abandoned
Should I pop the heads off or nah? Also, who makes the best Performance Corvette parts? Thank you for watching and consider subscribing for more content like this! You ROOOOCKK!! 🤘🤘
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Trim Removal Kit - amzn.to/44NX6mZ
Endoscope - amzn.to/3DeBBjq
Oil Can - amzn.to/3Oo3HPt
Milwaukee M12 Impact - amzn.to/3OeG9fZ
Milwaukee M18 Impact - amzn.to/3rs8UwE
COMPANIES I TRUST
⬇️ OEM PARTS, PLASTICS, BEARINGS, SEALS ETC ⬇️
Rocky Mountain ATV MC - bit.ly/32OHs02
⬇️ POWDER COATING ⬇️
Bonehead Performance Coatings - boneheadperformance.com/ (Mention my name and get 10% off)
⬇️ SUSPENSION ⬇️
Rocket Ron - www.rocketronracing.com/
⬇️ CASE SAVERS & SKID PLATES ⬇️
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
⬇️ PREMIUM BAR CLAMPS & THROTTLES ⬇️
Urmosi - urmosi.com/
⬇️ USED PARTS & REBUILD SERVICES ⬇️
Power Sports Nation - www.powersportsnation.com/
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
MotoBlast - www.njvaporblast.com/
MERCH - michaelsabo.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: [e-mail]
I own the license to use any and all music in this video.

[@MichaelSabo]

Should I pop the heads off or nah? Also, who makes the best Performance Corvette parts? Thank you for watching and consider subscribing for more content like this! You ROOOOCKK!! 🤘🤘

[@racingruss7263]

Pull the heads off...You can get in there and clean up that rusty cylinder and a fresh valve job.

[@robertburn8705]

Only if it burns oil the rings should scrape the rust off

[@juliantucci3273]

Only if it keeps smoking when you run it if not the rust is cleared, run it!

[@alexbittle2900]

i would only try to get to the bad cylinder dont worry about the rest quick clean up reinstall yes take off one head if it was me.

[@jonathancarver1547]

That rusty cylinder probaly has the rings rusted to the cylinder. Get some aerokroil, it works miracles. I bought a seized up reloader that was jacked sprayed it with the kroil and let it sit for a cpl days and it freed up great.

[@ericlum5286]

Just bite the bullet Mike and pull the motor and rebuild it yourself, don't get overwhelmed because you've never done it before, I believe your 100% capable of doing it, it will be a learning experience.👍

[@RobWisemanDeezFit]

Agreed..Your tool box is gonna need an extra drawer..I drive a caddy, everytime I garage play new specialty tool required..For the love of the game..Sweet ride...All N on ya.

[@angelcelis9090]

It isn't going to be a hard rebuild either it's not like it grenaded.

[@pbag26]

+1. My first car hd volcanic sh on it and we cleaned it up and pimped it. This car looks doable. It's going to take serious work though. Can't wait to see how you rebuild this.

[@83glxcrusin97]

Nope.. this motor is done. Get a junk yard core and do a build!!! No Brainer...

[@Thekidsinafrica14]

I agree. I never messed with vehicle engines and I rebuilt all the top end on my vortec 6.0. The Ls engines are real easy to work on

[@alexcherneta7572]

Quick tip. Take the serpentine belt off. If your tensioners or alternator is seized from the water it will make the engine difficult to turn over. Worth a shot🤷🏼‍♂️🤷🏼‍♂️

[@chadriddle3517]

Great advice

[@PeteHager]

Congratulations on 200k subs Mike! Another milestone in the books and many more to come 👏🤘

[@MichaelSabo]

Thank you for being there since the early days Pete; hope to see you cross 200 soon as well 🤘👊

[@MrBeefsnorkel]

20 year technician commands big money these days. i was one for about 10, just 'retired' to service writing. i miss it tho and my big ass matco box just sits there. nice friend to have!

[@clintmallard1471]

Always great to see dad involved.

[@motordown7664]

Due to it being a manual transmission, I’m assuming the vehicle was in neutral during the use of wrench. Another way would be to leave the vehicle in gear and gently push the it back and forth…..parking brake disengage of course. Good luck

[@patrickmitchell6631]

Love it ,because you don’t pretend to know everything,and not afraid to ask for help

[@MichaelSabo]

A lot to learn with this one for sure!

[@vettemaniac2237]

One thing I know for sure ... I had a 2017 C7 with the 7-speed manual. This car will be an absolute hoot once you get her running. And you will get her running! Stay with it!!!

[@abbybonilla4511]

That colonoscopy joke LOLLLLL Dr. Mike Sabo, Basket Case Colons 🤣🤣🤣

[@jasonhighlander5498]

I really enjoy seeing your pops come out an help! He should be in more videos

[@BobBob-dx1tv]

LoL I told you valve train in the last video. Don’t forget the timing chain and oil pump was in the water. Just pull the motor. You don’t want rust being pushed in the the high pressure fuel pump and the DOD system

[@andrewmitchell2189]

I don’t really understand the argument. There’s an engine in it. Do what you do best and send it! The worst that could happen is you have to get a motor anyway. Nothing to lose really.

[@williamhorsley7799]

kzbin.info/www/bejne/nqWUm2Oij753q7c

[@BobBob-dx1tv]

Hell no those motors are not cheap if all it needs is a good cleaning gaskets are cheaper

[@RobWisemanDeezFit]

Na slow and steady wins.. Price an engine..Jumping skippy is gonna cost..I would rather pull it tske it apart and spend the money on candy. ALL N

[@mlballough7845]

Put the spark plug back in the bad cylinder and fill it through the intake with atf/ marvel mystery so then it can soak the valve and hopfully make it so it would have a better chance of a evenly seating

[@LatersOnTheMenjay.]

These guys didn't even use a jack. They just grabbed a wheel each and deadlifted it onto the jack-stands.

[@jamesswetland5019]

Michael it’s an engine you’ll get it cleaned up and it will run. The problem is the water is done damage to your bearings and later on down the road you will have a problem with the engine. But good luck I hope everything turns out well for you.

[@angelcelis9090]

The bearings would only be damaged if they are rusted as well or the engine was ran with rust.

[@victorgerhardt1504]

You have to try! I believe you will need a top end rebuild.

[@MichaelSabo]

I think it's the best route Victor!

[@buckyhurford3424]

I’m at 21 minutes in and being a mechanic for 13 years. I like this friend. I was thinking the same as him

[@krrmoto5048]

”Keep all those plugs holed” 😂❤

[@shapeshiftsix]

Can't go wrong with Texas Speed for aftermarket performance parts. Let's see a Bald Eagle cam in that bad boy!

[@jameshealy4594]

Dave is like "We can do anything with carbon fibre" and I'm thinking "how about submarines?", I'm a monster. :D

[@racingruss7263]

Pull the heads off...Take a scotch bright pad and clean up the rusty cylinder..PB blaster works great..I know you can get this to run.Your quad builds are amazing..Can't wait until the next one.

[@-jeffreybollenbach-]

Man is it a good day to have one of your videos. Waiting on parts for the quad so it’s been very boring so having one of your videos makes my week. Love the videos. Thanks for all of the hard work you put into these. Love them

[@williamhorsley7799]

kzbin.info/www/bejne/nqWUm2Oij753q7c

[@Daunou777]

MICHAEL !!!!! 200k subscribers to your YT channel & the views you’re getting are unbelievable!!!!! Wow that’s so great. Proud of you my friend …. You’ve created a whole business for yourself out of something you love !!!! Oh PS it’s Mona 😉😉😉😊

[@ericlum5286]

Love seeing big Papa Sabo in the videos!!!!

[@leehuntley189]

Ide be tickled to death to see a full teardown and vaporblast and rezinc all the parts all neatly documented like you do!

[@kevinconnors9396]

Pop the heads off dig right into it you'll be able to see better if you do get that rusted cylinder to budge. Don't let all the negative comments get you down just keep plugging away at it and doing what you love to. He'll yea brother keep up the good work you got this.

[@xtrident60]

Mike, just love your videos man and this is an excellent series! Thank you for taking us on these rides!

[@clangdon1436]

I guess my comment was bang on . The bad cylinder needs machine work . Honed and valve job .

[@JRBetley32]

I have my fingers and balls crossed you get that thing up and running again👍

[@keithwingfield5101]

HATERS ARE THE FUEL THAT MAKE US KEEP DIGGING...DON'T FORGET TO POP OPEN FUSE BOXES AND ENGINE MANAGEMENT MODULES! GOD BLESS

[@williamneske6452]

I definitely was not staring at the clock waiting for this

[@williamhorsley7799]

kzbin.info/www/bejne/nqWUm2Oij753q7c

[@dennisbrooks186]

I deff wasn't, was taking a dump and seen it pop up, I'm now watching on my tho, all done taking my dump 😂

[@OnEst_Opinion]

Lol that mechanic was hilarious plus can’t wait for more content on this series.

[@roguetrader05]

Great content and I know you will get this Vette back on the road. You are doing what I’ve always wanted to do! Go get it bud! 💪🏼

[@jasonfuller6527]

I love the channel, man. I hope the corvette helps grow your channel, even though I'm ready to get back to atv stuff. Keep up the good work!

[@MichaelSabo]

Thank you for the love Jason! I will have offroad videos back soon; just got most of the remainder of TRI-Z parts back yesterday 🤘

[@maj.kamper9314]

Best advice I can give. Pull it (the engine) pull the heads sand the cylinder walls down enough till you can get it to roll over. Pop out the pistons If you try to spin it with that piston rusted like that you will damage the piston , rings, and cylinder wall for sure. If you break it down you will only need rings and a fresh one hone job on the cylinders and put it back together. If you really want yo bandaid it just to get it running. Pull the head on the bank with the rusted piston sand the walls down to get rid of the rust enough to pop the piston out . New rings a piston hone that one cylinder and put it back together

[@joemusicman64]

Agree. Turning the engine with that cylinder all rusty will just damage it more. Clean it up first.

[@angelcelis9090]

At the end of this i dont doubt youre going to be in this Corvette alot less than a used high Mile one. Awesome video as always.🔥🔥

[@MrCountmein3]

Any victory is good at this point. I have complete faith in you guys. Can't wait to see it finished.

[@rphawx]

Reminds me of the good ol’ days.. boy’s will be boy’s:)! What a great episode! Keep having fun.

[@lypheEddie]

Definitely good progress man.l!

[@OnEst_Opinion]

The Corvette project is dope bro. Keep ‘em coming! We’re waiting!

[@wilfredocaban3542]

You have nothing to lose he gave you great advice.I think it can be saved . Didn't they guy said they pressured washed the interior they probably removed it to clean.I see you guys working with your Dad's and it makes me miss my Dad so much .

[@chadriddle3517]

Congratulations on 200k subs !!! I remember when you had less than 40k subs and been subscribed since I knew you would grow my friend! Killer job on everything you do!

[@mikebarriball]

WOW, THERE IS A LOT GOING ON IN THAT SEAT. THANKS FOR THAT.👍👍

[@russomm21]

Great video, Mike. I'm hooked! You'll get this thing running. I'm sure of it.

[@rook13pdx]

Great content man- been an awesome channel to watch, but this is next level. Thanks

[@iadubber]

Loving this project!

[@macabru999]

On this episode of GYM BROS, our heroes penetrate small holes with small snake and laugh about it 🤣🤣

[@MichaelSabo]

LMFAO!!

[@adamrice2847]

Love that vintage blue blade fan in the background!

[@terrywynn1093]

I’m glad your dad gets to help with the project. I can’t wait for the next video.

[@ILOVEBACONBOY2018]

Nice to see you go through with it, rebuild the egine.

[@kevinconnot3106]

Looks like you’re on the right track!

[@christurner5473]

I love these corvette videos my only gripe is I only wish they were longer and you posted them sooner lol . Great video keep up the great work

[@just4kicks950]

It's definitely worth trying the motor. Worst case scenario, new engine. Beautiful Vett Michael 🎬🚘🔥🔥💯👍. Salute 😎 Wish you all the best my friend.

[@ni_wink84]

I had high hopes she would break loose! I think your pop and Matt are going to be a huge help getting this going again, after years of watching your videos I already know it’ll turn out amazing! Great video as always Mike! I’m really liking the vette series, can’t wait to see you get her up and running

[@RealSuburbanCowboy]

You have the one thing they didn't that was needed to fix this car. You have the DESIRE to do it. They only wanted to make $$ on the car. You want to own/drive the car. I am calling this a "Cake Walk" for you. I can't wait to see this car running.

[@tristan_andrade]

Just on time 🔥

[@nelsonkarrer6961]

Whatever you do turns out awesome keep going

[@Dansyoung]

Awesome. I started watching your videos a few years ago when I had my yfz450, fixed it up and sold it. I’ve gone back to my roots a bit with cars, currently I’m working on LS3 swapping a Mazda RX8. Also I’ve been closely watching the tavarish P1 rebuild…. Great content 👍👍👍

[@Dansyoung]

You also really don’t want to lubricate the seals on the fuel injectors, they are Teflon and easily swell up and leak. I’m in Canada and my local pricing for a LS3 376/480 (ls3 with hot came rated just under 500hp) is 11k.

[@roblewis7186]

That dead spot in the grass cracked me up!!! So glad to see you doing car content dude!!! Good luck!!!

[@dwdeezul]

easily my top 3 favorite youtubers. Keep it up brother👍🏽

[@MichaelSabo]

Awesome compliment man, thank you for watching and supporting!

[@clangdon1436]

D.O.D delete kit is a must .

[@MichaelSabo]

Hearing a lot about this; I'm going to research up on this!

[@toddthompson3501]

Love it so far man keep it up

[@IlllIlIlIIlll]

When the car is done i bet there will still be the one guy saying that thier banshee will gap that

[@jonmelvin5682]

Great video

[@donaldsearles817]

Try to turn the flywheel with a bar to help break it. Free. it rotates a lot easier. Open the dust cover window there should be a Access point. On the bell housing.

[@ScaleRacingChannel]

I would fill that bad cylinder full of Evaporust. The stuff is awesome. I use it to revive old, rusty axles on Hot Wheels. It erases rust and doesn't even hurt the paint or plastic. Obviously you would have to flush the pan out, but you're gonna have to do that anyway....

[@MichaelSabo]

I've heard really good stuff about Evaporust - thank you for the info!

[@paulb8186]

Aqua locked....bent/snapped conrod $$$$!!! All modules will be toast, basically a shiny money pit.

[@bigbullhorn8443]

I’m with Team Sabo!!!!LFG!!!! 🤟🏻 Long road but u got this and we’re with ya guys

[@AyanFortZ34]

I love your vids Mike my cousin got a salvage corvette c7 grandsport same as yours and it only had 2000 miles and he payed around 20 k and put 20k of work into it and now it is perfect and runs and looks great👍

[@roadgliderider1]

When you say "water" it sounds like "weerter" Great project Mike.

[@blackwarrior4699]

cannot wait for the next vid

[@curtiswilcock5628]

I would take the heads of for sure that way you know you’ll be able to sort it 😁 loving the project so far

[@MR-puffnstuff]

We all are praying for you in one way or another and you will get er done in a small town.

[@MichaelSabo]

Hell yea man, thank you for the prayers!

[@gpiece601]

200,000 subscribers!! Congrats brotha!!

[@MichaelSabo]

Thank you man, wouldn't be here without you 🤘

[@kevinconnot3106]

I had a friend with a Honda CR 500 was mad at his parents and threw it off a bridge into 80 feet of water was there for over two weeks had divers come in find it we took it apart, cleaned it up put it back together, worked as good as it ever did!

[@feltonseigler7578]

Very impressed, im am sure it will run!!! I see worst and had it running in no time. Not a corvette but it should be fine. just a lot work ahead.You got thi this

[@SleeveOfWizzard]

Great video man!

[@MichaelSabo]

Thank you dude!

[@teamkazoo]

Great vid.

[@derekwilkinson7939]

Interesting stuff.

[@kayejaye261]

People crack me up. U know what ur doing. Focus! Going to turn out great. Love look of that Vette. Great content. U don't do half ass work. Doubt u start now. OMG that grey Ferrari sweet. U done lot to be here. Enjoy it. 😎👍

[@kevinconnot3106]

Don’t be afraid to run the engine at idle with that mixture in the crank just not very long to three minutes and don’t rev engine at all. Then drain I’ve done it dozens of times and it does not hurt anything, but actually gets the gunk out of the oil ports and bearings.

[@notbuyingit8047]

33:00 the fuel rail line can be reused, but the fuel injectors are junked by removing them. If you pull them out the heads save your self a ton of headache and get a set of new injectors.

[@dianeruiz0721]

Hi Michael, I’m rooting for you! I love that tiny little ratchet wrench you use at the end. It’s only about 3 inches long. It’s adorable. ❤

[@robertevans9354]

Mike your on the right track , flush and rinse ,clean, decontamination, TLC then panick .

[@armydog1002]

Nice! You should see about upgrading the plastic seat trim to carbon fiber.

[@yolandeblanchette]

Nice job mike 😊

[@buckyhurford3424]

Sabo! Each piece of glass should say GM in a corner of the glass… every piece of glas brother!

[@FatHulkRideEbike]

Going to be cool when you fully disassemble that vette and put all the parts in the driveway!

[@MichaelSabo]

Dude I thought about this... if I actually do that, I'm going to need the whole driveway 😂

[@greasemonkeygarage1896]

Also drain the transmission and diff it’ll be full of water too !

[@GSAFLEX]

Congratulations on 200K

[@MichaelSabo]

Thank you dude!

[@MrAmity009]

You have to make this happen now, or else al is for nothing. Improvise, adapt and overcome. Never quit , it will run !!

[@jameschitwood5962]

200k subscribers bro! Congratulations

[@MichaelSabo]

Thank you for being a part of the 200k James!

[@ifunk4ucgb]

Keep going Mike,the reward will be worth it!

[@MichaelSabo]

100%, thank you man!

[@raynavarra]

Good stuff Mike. Small wins, will lead to victory. I would definitely pull the heads and get them machined. Clean out the top of the cylinder walls by hand. That rust is surface. But if it’s not, you will know for sure when you pull the heads. I would definitely give it a shot before going to a complete rebuild on a 14k mikes motor.

[@robertvanderbaan3722]

You have all the right stuff to get it lubed up.

[@rebuilt4460]

On the seats I usually buy used seats out of a wrecked vehicle. You can always use the leather if color isn't correct. Better than buying all modules and motors!

[@cpuram8883]

Just started watching this interesting video. I imagine if there is no oxygen the rust is limited. Looks like you're doing the right thing 👌 for now

[@jaxsonhugh9334]

There is a lot more to that car than just the engine. Trans, computers, wiring harnesses, the list goes on.

[@danikkot9903]

I belive in you fixing this thing Mike.