Mastercam LATHE G73 PARTEN REPEAT CANNED CYCLE AND G75 GROOVE CANNED GYCLE

Hello Everyone,
Subscribe for upcoming series to learn Mastercam software. These videos are available in both Hindi and English for your convenience.
Mastercam Training video made to those working in CNC ,CAD /CAM area.
Canned Rough Toolpaths
Use canned rough toolpaths to create a roughing toolpath which is based on your machine tool control's canned cycles. For example, a Fanuc-compatible post would typically output a G71. This will result in a very compact NC program, but you do not have access to all of Mastercam's roughing features. Some of the features which are not supported include:
Zig-zag cutting (only one-way passes are enabled)
Angled overlap
Semi-finish passes
Toolpath filtering
In addition, you have fewer options for creating entry and exit passes.
If you need to use any of these features, consider creating a standard rough toolpath instead.
To create the toolpath, select Canned, Rough from the General gallery of the Lathe, Turning, or Mill-Turn, Turning tab. Use the Canned Rough dialog box to enter the toolpath parameters.
Contact us for personal Training and Mastercam Software requirement (For both Industrial and Educational) .
[e-mail]
pragathicamtech.com/
LIKE||SHARE|| SUBSCRIBE