All On 4 Design with Screw Retained Bar Split File [ Exocad Tutorial ]

[@masterdentaltechnician1914]

Library Download Link : www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&

[@ChahiraRachdi]

Up

[@TheAjrash]

Wow what a legend, thank you for doing this!!

[@masterdentaltechnician1914]

You are welcome

[@PortalFPV]

You are the man for figuring this out. Seriously Exocad....how in the heck was anyone else supposed to figure this out???

[@masterdentaltechnician1914]

Thank you 😀

[@TecnodentDigital]

Great work man! Congrats!

[@masterdentaltechnician1914]

Thank you

[@JessicaB-hk9yk]

Wonderful video. I am amazed that you figured this out.

[@masterdentaltechnician1914]

Thank you.

[@nosaali7589]

Thank you so much for all education video. You are the best

[@masterdentaltechnician1914]

👍 Thank you for the great comment

[@EMANUELL-k8r]

thank you, this is a amazing video.

[@masterdentaltechnician1914]

Thank you

[@alexopaldent]

Wow, very cool… it’s what I’m waiting for!!! With EXOCAD, great!!! Thanks Master 🙏👋🏼😄

[@masterdentaltechnician1914]

You are welcome

[@Gonzaloxzub]

Thanks so much for all your help!!!!!

[@masterdentaltechnician1914]

Thank you for the great comment

[@EMANUELL-k8r]

thank you, this video is amazing

[@masterdentaltechnician1914]

Thank you

[@ahmadjabban2304]

Great work.... thanks for this video 🙏

[@masterdentaltechnician1914]

Thank you

[@tdog4044]

Thank you! Thought that would need to purchase b4d

[@Evgo-You]

Great work, regards with thanks for the effort!

[@Gld_Baconpro]

thank you for this sir

[@masterdentaltechnician1914]

You are welcome

[@laertcurri5604]

WOOOOWWWW THIS IS AMASIG

[@masterdentaltechnician1914]

Thank you! Please share so others can enjoy it as well.

[@Zeze12321]

Thank you sir!!

[@masterdentaltechnician1914]

You are welcome

[@wintersolider2305]

Amazing thanks mann😊

[@masterdentaltechnician1914]

Thank you!!

[@fredycuba2011]

very very good job congrats😁😁 👌👍

[@masterdentaltechnician1914]

Thank you for being a channel supporter!

[@abdalemor8998]

Great job thanks for your time

[@masterdentaltechnician1914]

Thank you

[@IrfanKhan-ze4yx]

very cool thank you. can save a lot of annoyances of having to use blender!

[@masterdentaltechnician1914]

You are welcome!

[@abcherco4073]

Thank's master 😊 Could you please send all the status stl files for training. Please

[@mohamadghannoum2196]

Thanks Master 🙏 .. so we can do this on exocad only without blender?

[@TùngLê-r7r]

Amazinggg!!!🎉

[@masterdentaltechnician1914]

Thank you!

[@hosseinabachizadeh9226]

Thank you very much Is it possible to do the same thing in Dental system?

[@masterdentaltechnician1914]

Thank you. I can experiment with it. Might be possible and Exoxad is probably easier.

[@tchyrex]

Muito obrigado pelo vídeo, me ajudou muito!

[@masterdentaltechnician1914]

You are welcome!

[@MuhammadHarisKhawaja]

Thanks fo the amazing info provided. We downloaded the library but there is no sdfa files associated. Please let us know how to add to exocad your files and be able to load at detect implant position..plz

[@masterdentaltechnician1914]

Exocad can read all kinds of files and a library does not need to include sdfa files. Everything is managed in the config xml file. The download should contain 2 folder. Copy the first one (Implant) into the implants folder under ..\DentalApp\libray\. The second folder (Implants) should go into the model creator folder under the Implants folder. Copy the entire library Folder not just the files in each folder in Exocad. Let me know if you have any questions or issues.

[@andyfabia]

Thank you sir i apreciate it😊

[@masterdentaltechnician1914]

You are welcome

[@rodrigocecilia9480]

gracias pelao ! gracias!!!

[@AndrewPriddy]

awesome!!

[@masterdentaltechnician1914]

Thank you

[@anaalmagro1549]

Definitely you are a Master, I really appreciate all your tips and knowledge that you have. Hope someday be at least one third the professional you are. Thank you sir. 🤩🙌🏻👏🏻🫶🏻

[@masterdentaltechnician1914]

❤️🙏 Thank you for the great comment. Have you seen my latest video? kzbin.info/www/bejne/jqquepaDe9l5idk

[@anaalmagro1549]

Of course Sir ! I have the bell on !

[@masterdentaltechnician1914]

Thank you for being a channel supporter!🙏

[@موريسصباغ]

Thank you for your efforts. Can this library be used in all cases of ibar?

[@masterdentaltechnician1914]

Can you specify "All cases"?

[@موريسصباغ]

@@masterdentaltechnician1914 I mean, are all kinds of implants used in the design of ibar of the multi unit type?

[@STLDentalLab]

Thanks fo the amazing info provided. We downloaded the library but there is no sdfa files associated. Please let us know how to add to exocad your files and be able to load at detect implant position.

[@masterdentaltechnician1914]

There are no sdfa files but all STL. Copy the entire folder where the files are in, into the Exocad/implant folder. No subfolders!! After that restart the CAD module and you can chose it from the library menu

[@masterdentaltechnician1914]

Check out this quick video for adding libraries. www.patreon.com/posts/how-to-add-in-105651721?Link&

[@jonathanricardobonillamara5657]

Muchas gracias!!!

[@masterdentaltechnician1914]

You are welcome

[@dentalline_laboratory]

"Hi I've learned a lot from your videos, thank you! Is there a method in exocad for drawing subgingival margins on intraoral scanned files that allows for removing soft tissue on the buccal and lingual sides? I want to achieve a result similar to margin scraping on stone models, without using freeform modeling. Any advice?"

[@masterdentaltechnician1914]

Yes. The new version of 3.2 is allowing that.

[@eu3145]

hi sir! You also have the vid where you design the upper structure/ bridge? thanks!

[@masterdentaltechnician1914]

It's a regular All on 4 design. I have multiple videos about that

[@eu3145]

@@masterdentaltechnician1914 yeah! just finished watching one of them :P..... thank you very much!

[@masterdentaltechnician1914]

@eu3145 you are welcome

[@Odontologia3D-FluxoDigital]

I am a Dentist from Brazil and I would like you to do several Protocol projects for my Clinic. How can I talk to you?

[@masterdentaltechnician1914]

You can email me at [e-mail]

[@mengmersa]

What if we want to create a Finish line between the bar & the zirconia prosthesis with 0.5-1mm thickness ...... is it applicable ?

[@masterdentaltechnician1914]

Change the bar profile. I used the standard bar profile in this example.

[@mengmersa]

@@masterdentaltechnician1914 Thank you ! i've another question please , Does the steps can be applied with the complex Prosthesis ?

[@MAGICdent-f6f]

do the library support all implants systems (like biotech-ETK-neodent....}

[@saifpoxi9247]

Up

[@chaimechaib8480]

Up Up

[@MAGICdent-f6f]

up*

[@ChahiraRachdi]

Up

[@ChahiraRachdi]

Up

[@mariussava6126]

Thank you for your video, It's amazing. I tried, but in final step, when I need to subtract attachment always I get a failure message. Attachment can't be applyed. There is any secret here to succesfully apply cutter as attachment/subtract ? Thank you verymuch.

[@masterdentaltechnician1914]

There are several reasons why there is a failure. Usually it has to do with the cutter itself. 1) Check if you exported only 1 mesh as the cutter. Double meshes cause errors. 2) the cutter has some errors in itself. import the cutter into Meshmixer and inspect for errors. make the cutter a solid. Export and try again. 3) if you didn't rotate the cutter in the subtraction mode it might fail. The Meshmixer version usually helps.

[@mariussava6126]

@@masterdentaltechnician1914 Thank you very very much, I will try all 3 dots and get back here to let you know. I repeat, your wok in this video is really amazing.

[@masterdentaltechnician1914]

@mariussava6126 if it's not working send me the file on Patreon and I will look at it.

[@mariussava6126]

@@masterdentaltechnician1914 Hi. I tried several times, both ways(make solid in meshmixer and loading as model am do bottoms) and it worked nicely. Now, understanding your ideea, it make sense, is logical....now I'm asking myself why I didn't think this way before... Thank you very much.

[@masterdentaltechnician1914]

@mariussava6126 you are welcome. I use that technique on all locator and Conus cases to have an internal TI-Bar. If you haven't seen that technique I made a video about it. Thanks for the comment!!

[@PabloB-j1n]

it can be used with rosen screws?

[@masterdentaltechnician1914]

No. This Library does not feature Rozen Screws but I can see if I can update it.

[@peterelfar3652]

@@masterdentaltechnician1914 did you happen to update the library to include the rosen screw M1.4 by any chance and the dess 19018 screw please

[@masterdentaltechnician1914]

No. I would not use Rosen screws on Metal to metal. You risk of never getting them out.

[@masterdentaltechnician1914]

@peterelfar3652 I would not recommend using Rosen screws on Metal to metal. You risk of never getting them out.

[@masterdentaltechnician1914]

@peterelfar3652 the Dess 19.018 long screw you only need for PMMA. There is no need for it on metal bars

[@filipposfilippidis9626]

Very nice technique and beautiful video! Congrats!🎉 But how do you move the finished design our from the bar? 😅

[@masterdentaltechnician1914]

Thank you!! Can you please rephrase the question? I am having trouble understanding what you are asking.

[@filipposfilippidis9626]

@@masterdentaltechnician1914 , sorry my bad. during your outro in your video. you do separate the bridge from the bar, moving the bridge. How did you do that?

[@masterdentaltechnician1914]

@@filipposfilippidis9626 that was done in my editing program. It's not an Exoxad feature.😁

[@filipposfilippidis9626]

@@masterdentaltechnician1914 oh okay. thanks anyway. Keep showing us your magic😁

[@609chetu]

Hello,everything is perfect, until I get to use the cut bar attachment to make subtract, I don't have the setting allows any change, is it an additional function or should I set it somewhere, thank you

[@masterdentaltechnician1914]

There could be several reasons. A) make a solid of the cutter in meshmixer, B) uncheck allow any changes when cutting it. C) there might be artifacts in the main design inside when you deleted the mua interfaces

[@609chetu]

Don’t exist the setting in the dialog box,meby mai exocad is not the latest one

[@masterdentaltechnician1914]

@609chetu what's your version

[@609chetu]

Rijeka 3.1

[@masterdentaltechnician1914]

@@609chetu try to make the cutter a solid

[@massimilianomontani5591]

Video molto interessante complimenti per la tua conoscenza. Non ho capito il passaggio al minuto 8,49 potresti aiutarmi? Grazie

[@DiaaSaeed-b3z]

Hello sir Thank you so much for this video but I'm having a trouble in the final step of applying the attachment and always getting an error message. what can I do to fix it?

[@masterdentaltechnician1914]

Import the cutter into meshmixer and make a solid out of it. Then try again. This happens sometimes when something is wrong either with the cutter or the all on 4 mesh

[@manuelgodino6987]

Lo he intentado con todas las actualizaciones y no sale siempre da fallo

[@masterdentaltechnician1914]

Did you try to make a Solid of the cutter in Meshmixer? Sometimes the MUA are not cut out correctly and there are meshes inside the main mesh. When you load the cutter click "Rotate". When the cutter is loaded don't move it anymore.

[@manuelgodino6987]

@ gracias todo perfecto

[@alial1701]

Can you give us the scan, stl file to learn how to do this at home?

[@masterdentaltechnician1914]

All the scans and a light library are available for download on my Patreon page

[@MohammadKBader]

Where can I find the libraries

[@masterdentaltechnician1914]

On my Patreon page

[@StudiodentDigital]

Hi great contet! when i try to subtract with attachment a lot of time i get the message ''attachment operation failed: ensure that the attachment geometry correctly intersects the desired target reconstruction". Do you know what can i do to fix this? thanks in advance

[@masterdentaltechnician1914]

Import the cutter into Meshmixer and make a solid out of it. Then try again. This is the easiest way.

[@shenji5645]

Hello master do you remember Jeffrey Santiago?

[@masterdentaltechnician1914]

Of course I remember Jeffrey from when I lived in CA. Great technician.

[@luisantonionontoljave6472]

Donde consigo todas esas librerías 3:05 gracias

[@masterdentaltechnician1914]

www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&

[@samjob6149]

I appreciate your efforts and videos in spreading knowledge, but what is exactly the purpose of background music? If you were invited to to teach at a conference, do you bring a radio with you and crank up the music to entertain your audience while they listen to you lecture? a lot of steps in your video and many people get easily distracted by unnecessary music

[@masterdentaltechnician1914]

Thanks for sharing your thoughts! I understand where you're coming from. My intention with background music is to enhance the viewing experience, but I see how it can sometimes be distracting. Your feedback is valuable, and I'll certainly consider toning it down in future videos to keep the focus on the content. Appreciate your honest feedback!

[@denissaliu8859]

Hi.. kann ich sie kontaktieren

[@Ermin708]

Can you tell me how to solve the problem. At the end, when I need to cut the bar , Attachment operation failed appears. Thank you

[@masterdentaltechnician1914]

Something is not correct with the cutting tool( the bar). Either you didn't invert it or it's too short. Hard to tell without more information. You can send me the file and I will look at it.

[@Ermin708]

@@masterdentaltechnician1914 can you please send me your mail. Thank you

[@Ermin708]

@@masterdentaltechnician1914 can you send me your mail. Thank you

[@wintersolider2305]

Same thing for me but i followed every step…

[@masterdentaltechnician1914]

I will make a short troubleshooting video to avoid these complications .

[@manuelgodino6987]

En el último paso del recorte del atache siempre de error. Porque puede ser

[@masterdentaltechnician1914]

Import the cutter into Meshmixer and make it a solid. Then try again to cut it out of the bar in Exocad.

[@joaowilliamcheconi1583]

What is the software version?

[@masterdentaltechnician1914]

3.2

[@Laboratoiredentaulina]

please the link to download the MDT Liberery

[@masterdentaltechnician1914]

www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&

[@antoquito20]

I need to see this video a couple of times , great work !!! I was wondering how to do this on exocad with out going to B4D

[@masterdentaltechnician1914]

Thank you! I am glad I could help.

[@tr-warrior5024]

u love this jop

[@masterdentaltechnician1914]

Thank you!

[@awonekidamine9138]

please i cant get Access to patreon to download the librairie

[@masterdentaltechnician1914]

Thank you for the info. You need to be a Patreon member (free or paid). I checked, and there are no other settings options for me to change it.

[@HACKERdENTIST]

👏👏👏

[@masterdentaltechnician1914]

Thank you.

[@christiansilvianotolentino492]

es compatiblle con adin

[@shinyco2021]

👏👏❤❤

[@masterdentaltechnician1914]

Thank you!

[@wintersolider2305]

But there is one big problem…its not possible to set minimal thickness…

[@masterdentaltechnician1914]

That is correct. That's why you have to bring in the cutter as a generic mesh before cutting and add the areas where it's minimal thickness.

[@rubengil6377]

nice. You should give B4D iBar a go. It makes this process extremely easier. Nice nonetheless

[@masterdentaltechnician1914]

Thank you for the comment! I wanted to find a way to stay in Exoxad 😀👍

[@tamtambaj]

You are very fast. Can you slow down please 😅

[@masterdentaltechnician1914]

Thank you for your feedback! I appreciate you watching the video. I'll definitely take that into consideration for future content and try to adjust the pace to make it more accessible. Feel free to let me know if there are any specific sections you'd like me to clarify or slow down. Your input helps me improve!

[@ВалерийКарп-с6и]

Thanks a lot for the video, now you don't have to buy B4D.. Please write a link to download the libraries

[@masterdentaltechnician1914]

www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&

[@clinicaldentalcadacademy989]

no bad, but with B4D we can doit more faster and better.

[@masterdentaltechnician1914]

I have no doubts 🙏👍❤️

[@clinicaldentalcadacademy989]

i think B4D is a little better that this

[@masterdentaltechnician1914]

I have no doubts. It's great to have options so you can choose what works best for you. Thanks for watching the video.

[@mistycmcana953]

hey doc i did all the steps but at the moment last moment im merging the bar to the final waxup , it doestnt let me attach it i tried this with galway and also with elfina and both give me this error ensure that the attachment geometry correctly intersects the desired im not sure what to do because is the same thing when im trying to sustract any restoration from the final model