I have learned more about audio engineering in one week of watching these videos than an entire semester in school for audio engineering.
@kaydencrooks2790 Жыл бұрын
I felt this LOL
@EXTERMINADORJAVIER Жыл бұрын
That's because in actual school systems you are obligated to eat all the senseless stuff the teachers want to give you even if it doesn't have to do with the theme you want to learn. It also affects the motivation being in a cold room of boring people. How the hell do you want to learn in your own way? With KZbin.
@keredrealmusic Жыл бұрын
facts, my homie cecil, went to college for music for four years and he said ik more than he does and I left, lol!
@RasmusGLarsson9 ай бұрын
@@kaydencrooks2790 yes
@bencalhoun7 ай бұрын
And it’s much cheaper 😉
@eclix3 жыл бұрын
the WOOORLD explodes. lmao
@kathelmrich89963 жыл бұрын
I liked this video for 2:23
@victorpilao8293 жыл бұрын
Lmao
@khatumu3 жыл бұрын
thank you so much for this content-- I can't get over the fact that this is free
@testing337911 ай бұрын
Free... bless you guys man. I'm a professional musician ..and guys these ppl are giving away years and years of hard work for free.. I don't know what to say... bless you guys. Thanks, Sirs.
@paulreid31806 ай бұрын
This channel is now my bible. Thank you so much!!
@philcodeca3 жыл бұрын
I didn’t know you could apply cross fade to all regions at once! Lesson learnt!
@RMRsavvy3 жыл бұрын
Giving away this for free should be a crime in itself. This is gonna help so many logic users. If I could like a video twice, it’d be this one for sure.
@christophrau87252 жыл бұрын
Thanks for infomations on gain automation. A difficult issue here is to "preserve" the "overall expression" of the band and artists in the interaction. A quiet passage should not necessarily have the "same gain level" as the following part in a song, just as it is with the reaction of all other sounds/instruments/singers. The musicians intentionally work with volume controls and pedals. The mix must not destroy the dynamics and expression of the musicians. Musicians may not identify with the song after the gain work. How do you see this quite difficult task for the "studio person".
@patrickreece62893 жыл бұрын
"Time slows when you get close to the horizon"
@PRIDEATH3 жыл бұрын
Cklose💀
@ZacharyRedFulton Жыл бұрын
Not just the secret sauce to compression, but expansion as well - just throwing that out there!
@mikelo3033 жыл бұрын
In Studio one you have Gain automation lane and just adjust that automation lane without any cutting. Just lane.
@Sajtlik3 жыл бұрын
I love your voice! It’s so understandable and it doesn’t make me sleepy during tutorial.
@mykelnikiforides33503 жыл бұрын
Brilliant!! Thank you Dylan. I’m learning quite a lot of new things from all your posts. You’ve saved me heaps of time too!! Very grateful for this information 🙏
@fasttempofever32993 жыл бұрын
Thank you so much! It's really nice to finally add this fundamental steps to my mixes, didn't know about this until now! Please keep it up with this awesome content, I'm discovering so much new stuff watching your videos!!
@issawen6592 жыл бұрын
If you want better control of the peaks, you can also just throw in the gain plugin in the beginning of your chain and just automate that as you would volume automation!!
@oddsummusic91102 жыл бұрын
this channel is a gem
@saintpreston3 жыл бұрын
Amazing video gain staging is how I start every mix now & it has given me the confidence to finally releases my own mixes!
@Spicyboi12142 жыл бұрын
Fantastic tutorial! I use Logic Pro as well and I’ve been very confused about how gain staging works. I’ve been trying to automate the gain throughout the tracks but it just ended up sounding uneven. This is going to make my life so much easier haha. Thank you for the great content! Keep up the hard work!
@Bashanvibe6 ай бұрын
I need to save this!!! Than you 🙏🏾
@ashwanit2tАй бұрын
you videos are damn informative, precise and clear.
@honeyjalafofficial10 ай бұрын
Great channel! You teach the things in a very simple manner! Thank you for your contribution!
@corinasucre3 жыл бұрын
This is amazing!!! You solved the problem that has been haunting me for three days🌞
@mache39842 жыл бұрын
Bruh........I was literally thinking to myself how dope it would be to have something like this in fl studio where you can actually see the wave form change. Crazy. I just have to figure this out in fl studio now. Thanks.
@ElyJaffeMusic3 жыл бұрын
amazing tutorial! I can't believe this info is free, thank you!!
@sizzlemann3 жыл бұрын
MOTU's Digital Performer has a better gain set up. You can cut, like you did, but the gain knob is in the bottom left corner of the soundbite. It's real convenient. Also, they have figured out a way so you don't have to add the crossfades. They have nondestructive editing that I hope the Apple programmers catch up on.
@Singerville3 жыл бұрын
Been waiting a while for this one, thanks for sharing!
@yassine.hammar197410 ай бұрын
Thanks dylan
@theq9373 жыл бұрын
Wow you delivered! Thank you!
@ivanpina85162 жыл бұрын
Thank you very much for your time to explain so well. Incredible your talent and dedication.
@mikefrogley86132 жыл бұрын
Great learning, gain automation.
@aplanebagel Жыл бұрын
thanks for this tips! I've learned something new!
@katecosettevocals11 ай бұрын
THANK YOU!
@mistermind79463 жыл бұрын
This is merely leveling the blobs :) yet it's useful for those who need to be aware that the signal level hitting the compressor affects the outcome of the compression.
@maseratifittipaldi3 жыл бұрын
Normalizing regions?
@kobraklutch74843 жыл бұрын
Thank you for this. I've been using the scissors and applying gain staging until now
@BigZBeatZ5039 ай бұрын
Got my subscription
@thomasw18653 жыл бұрын
You could use a waves vocal rider, und compress it afterwards, right? The rider would pretty much even out the volume (without coloring the tone), and the desired compression afterwards would give it the tone you want.
@AlecBoyd3 жыл бұрын
vocal rider is great because it doesn't introduce artifacts like compression (or gain automation). There's also the tried and true 1176 (grabbing the transients) with a fast release into LA-2A (handling general compression)
@Fiveash-Art10 ай бұрын
That vocal made me laugh my ass off. 😂 Informative video. 👍🏻
@TheTradingCodes2 жыл бұрын
Wow thanks I needed this video
@StratsRUs2 жыл бұрын
This is so great.Thank you.
@Firetuna13 жыл бұрын
So the organ player used his volume pedal. He did it in vain, you leveled it out. / I though gain automation was more like getting all the regions to a good plug-in volume. But not Leveling out dynamic performances?
@deesee20082 жыл бұрын
I agree. It’s better to gain stage and use volume automation, keeping note of compression.Or use everything judiciously.
@andymacc3 жыл бұрын
Well explained by someone... FINALLY
@AndrewRaia11 ай бұрын
I've thought about using the vocal rider plugin from waves, although it writes volume automations I think, you can bounce it to a new track, should save a lot of leg work.
@schoontube Жыл бұрын
How does this relate to the Gain Normalization function? It seems like the same thing but more nuanced and labor intensive.
@trolldeig1000 Жыл бұрын
Thank you! Helped a lot :)
@KurtBarbaza2 ай бұрын
Whats the difference of gain automation vs normalization?
@hleet3 жыл бұрын
Very instructive
@23thkr3 жыл бұрын
Great tutorial
@fridayafternextfamilycook-8155 Жыл бұрын
*very useful tutorial👊*
@lazarcabarkapa38852 жыл бұрын
does anyone know how to do this in fl studio?
@Victor_Amaya3 жыл бұрын
Amazing!!
@romesworldent3 жыл бұрын
Gems! 💎💎 LOGIC GANG...ALL DAY!
@kofiassor2164Ай бұрын
Is this the same as gainstaging?
@tripjj8662 Жыл бұрын
Is there a stock plugin that automated this process?
@corknakovastein Жыл бұрын
What about just normalizing the Track with RX10's normalize option? Seems a little less of a hassle and keeps everything sounding natural.
@Yls13133 жыл бұрын
Hey Dylan, I was wondering how to couple this with gain staging. Would I first gain stage the loudest part of the track, and then use gain automation to make the other tracks similar?
@docbrown20642 жыл бұрын
I would have said what the video is about is Clip Gains and NOT automation since there's no fine control that you'd see with automation. There's no automation control track either.
@Amzegal3 жыл бұрын
What about plugs like Vocal Rider at the beginning of your vocal chain? Would it be a good substitute and spare a nice chunk of time?
@Amzegal3 жыл бұрын
Sub question : would you use Vocal Rider for anything else than vocals?
@holberg_music3 жыл бұрын
I use Vocal Rider at the end of my vocal chains (just in case the waveforms are affected inconsistently by other plug-ins) and it's a great time-saver but it has limits. In general, it's good at providing boosts to content that needs lifting by 1-2dB and it's fine for reducing things that are too loud by about 3-6dB, altogether reducing your dynamic range without having the colouration of a compressor. But you'll find you need to manually set the gain of anything outside of those ranges, as the rider moves the fader in smooth curves and if you have stuff with quite wide dynamic range, you'll hear unnatural upward and downward volume fades.
@RobertCarlBlankMusic3 жыл бұрын
No, because you'd be adjusting the volume (end of signal chain) and not the gain (beginning of signal chain). The whole idea here is to have your insert plugins perform consistently, and the only way to do so is by adjusting the gain.
@Amzegal3 жыл бұрын
@@RobertCarlBlankMusic Does your answer still applies if vocal rider is at the beginning of the chain?
@LykaonMetalMusic2 жыл бұрын
Isnt that the same with the Gain plugin?
@yourgen1891 Жыл бұрын
Thanks but if I normalize a region?
@JDiamondMusic6 ай бұрын
Why not just use gain normalization feature ?
@VirtusLenon3 жыл бұрын
You’re the best!
@oscarpatxot6593 жыл бұрын
I have been using lately vocal rider but at the beggining of the chain, a little subtractive eq id needed and light compression. Tuning and desseing. Then commiting to that
@phankhactuan6442 жыл бұрын
great! thanks u so much
@fivechordmusic Жыл бұрын
Doesn't music need to breath? aka Dynamics? By changing the gain , aren't you removing the dynamic quality of the performance?
@ChrisOBrien19803 жыл бұрын
but that's not automated, right? You're just adjusting the gain before you start processing.
@patrickreece62893 жыл бұрын
Yes, you're right. This isn't automation. At all.
@hapcot3 жыл бұрын
@@patrickreece6289 That is what automation is a DAW is. The DAW is changing the Gain automatically when edited, and during playback. It's not like an AI that just does it for you
@patrickreece62893 жыл бұрын
@@hapcot No it isn't at all. It's essentially performing 'selection based processing' on specific audio regions. If we follow your definition, then literally everything that a DAW does is 'automation'.
@hapcot3 жыл бұрын
@@patrickreece6289 Look up automation in a Daw, this is what that is
@patrickreece62893 жыл бұрын
@@hapcot It absolutely isn't automation, of any kind. Nothing is being automated. It is region-based gain adjustment and nothing more.
@jive19263 жыл бұрын
After setting gain automation on the regions should we set the track to around -12 db in input volume? This is what I’ve learnt from other guides.
@antisocial62093 жыл бұрын
in your video the singer sceams how to do for scream without saturate pls
@AlessandroArcidiaco3 жыл бұрын
I hope in a real gain automation like Studio One and others does with line automations.
@jerryk32803 жыл бұрын
Where can one listen to the complete masterpiece?
@sammiller98553 жыл бұрын
If one wants to retain the dynamic range (purposely quiet and loud sections), how about automating the compressor threshold instead of gain. Or does that defeat the purpose of using a compressor?
@ReynaldoOchoa2 жыл бұрын
To me, the whole "gain automation" defeats the purpose of a compresor to level your vocals..
@jcb.982 жыл бұрын
@@ReynaldoOchoa In most pop music today, the job of a compressor has more to do with tone and character than dynamics. Gain staging removes the problem of a compressor only kicking in once in a while, that can change the tone. However, compression in terms of fast dynamics (mostly vocals) remains a huge part of good mix.
@Taffafilms3 жыл бұрын
Great channel Dylan new subscriber here!
@mohanshiva_musical2 жыл бұрын
Gain vs normalise pls explain Bro
@mdsoulsounds Жыл бұрын
Thanks, however it may depend on the music type because classical music is very dynamic and compression would kill it.
@derekmidgley3 жыл бұрын
With logic couldn't we simply add the stock gain plugin, first in chain and automate that. Listen for consistency. Once it sounds ok, bounce it in place and take a look. Done.
@RobertCarlBlankMusic3 жыл бұрын
I guess that would give you the same results, yes
@limbiknetworkstudios47023 жыл бұрын
Please tell me exact aim of bouncing our audio clip
@dbtube3 жыл бұрын
I don't think we can tell that "automation", but gain ajustments. No?
@saharshgupta81233 жыл бұрын
Suppose if I am going to do the gain automation for vocals, then do I need to do gain staging first?
@simonwilliams-x7v11 ай бұрын
Hi Dylan, I am a bit frustrated as I cannot see the gain area in the inspector window as you illustrated. I can't figure out why. In using Logic X. Hope you have an answer as the info on your video is excellent.
@ethanstansfield36673 жыл бұрын
Great tutorial, shocking song 😂
@younggorilla63113 жыл бұрын
What if you use a vocal rider?
@fvcktv29333 жыл бұрын
Does it work for master?
@adamraimo53713 жыл бұрын
ive watched this video a few times and its great information , thank you ! However when use marquee tool and split region then go to move the gain exactly like you did , the waveform is not changing inside selected region
@xXRyRyXx72 жыл бұрын
Don’t forget to switch back to the pointer tool, and click on the track. That will split it into its own section, enabling you to automate the gain. I came here today for the same reason! Happy mixing 🎸
@BarryDocherty2 жыл бұрын
In my region that Gain output isn't available. Just greyed out Gain: Is there a specific type of audio track that will enable using gain in the region inspector?
@rickhorvath3 жыл бұрын
I always do this. Guess it’s not an obvious option.
@Chinintoo162 жыл бұрын
Such absolutely valuable information My big question is, would you do gain automation on a track that is already gain staged? Or is it only done instead of gain staging on hyper dynamic instruments?
@WTFaulkner2 жыл бұрын
I absolutely would do gain automation on a track that is already gain staged. I start gain-staging with what I think will the the loudest (most featured) instrument in my mix, during the loudest section, then work the other instruments around it. However, if my loudest instrument is the vocals, vocals are highly dynamic. Gain automation is to smooth out the dynamics in the track before hitting it with successive compression units (many compress vocals multiple times in a chain). Gain staging helps ensure you leave headroom with your overall mix. Gain automation on an individual track helps that track even out so that you don't have large transient spikes suddenly clipping, or resort to over-relying on heavy, clamped-down compression to control a spike (which can cause unwanted distortion). They are two separate processes that each contribute to a better mix.
@dar5402 жыл бұрын
In order to get the "free" cheat sheets I had to watch a 24 minute video and then book a call with someone to try sell me more stuff ...and still no mention of the cheat sheets? What's going on here lads?
@thesoapboxsalute Жыл бұрын
Love this idea, but I can't access that "gain" function in the regions area where you use it. It says gain where it is supposed to be, but it looks like it's disabled. Am I missing something? Thanks!
@vykunthmusical84593 жыл бұрын
is it what the vocal rider does? instead of gain automation in vocals can we use vocal rider?
@greghill60963 жыл бұрын
Vocal rider does volume automation
@sonpit3 жыл бұрын
Maybe use both? Start off with this method first and then use vocal rider? I’m a beginner so I’m not sure. Kinda having a hard time understanding the difference (even though he explained it in this video).
@greghill60963 жыл бұрын
@@sonpit Think of a pipe with water running through it. Gain automation adjusts the level (water) before it goes through the pipe. Vocal rider adjusts the vocal automation (level) AFTER everything (after the pipe)
@sonpit3 жыл бұрын
@@greghill6096 Thanks Greg!
@kamyarkarimi36522 жыл бұрын
How to do that on midi track ? You bounce in place and than work in audio or i can put the Gain plugin and automate the gain knob?
@sohamshah31283 жыл бұрын
A question that I had is doesn't gain automation destroy the natural dynamics of a recording?
@WTFaulkner2 жыл бұрын
For most modern "radio-friendly" music, dynamics are bad. However, with the "loudness war" supposedly over, we can hope for a return to musical dynamics. I wouldn't gain automate a nuanced jazz or classical vocal. But for pop, EDM, hip hop, etc., it's a must in today's music industry. Also, "destroy" is a relative term, and depends on how much each individual producer approaches the project. The goal is to even out a vocal to get it to sit well in a mix, not to destroy dynamics. If the song has a quiet section with less instrumentation, I may choose to do less automation on that section. Your mileage may vary.
@x_b1u3f0x_x10 ай бұрын
Great video, but what the hell are those vocals
@youl0se05083 жыл бұрын
cool vid
@edups88 Жыл бұрын
Yeah idk this would effectively destroy the dynamics of a song.
@Aaronst963 жыл бұрын
TELEFUNKEN multitrack
@Oodlenoots3 жыл бұрын
2:18 lolz 🤣
@matttanner10623 жыл бұрын
I like this channel, informative content for sure... but I wish you guys would use different music for your tutorials. It’s painful sometimes
@greghill60963 жыл бұрын
Wouldn’t using Logic Pro’s normalization feature (normalize region) do the same or similar thing?
@greghill60963 жыл бұрын
@@DeSanKwuh good point. Thanks
@markryanwestcott3 жыл бұрын
Yes. Normalize region gain is a quicker option and is non-destructive. Look it up
@greghill60963 жыл бұрын
@@markryanwestcott thanks for the info. I did look it up. That method makes life much easier
@DavidRavenMoon3 жыл бұрын
I’m not sure I’d call this “automation.” It’s defined as “Automation is the technology by which a process or procedure is performed with minimal human assistance.” You are manually adjusting the gain. You aren’t automating it. It’s not automatic. 😃
@clawer93 жыл бұрын
I made it! I'm first.
@friedfries84243 жыл бұрын
10:30 why do you have 2 copies of vocals stacked ?