How a starter motor works - Fixing a lazy starter

My forklift doesn't start, the starter has no power but the battery is charged. How a starter works & DIY repair.
▼Click here for more!▼
Follow me on:
Facebook: / mastermilo82
Instagram: / mastermilo82
Merchandise: shop.spreadshirt.nl/Mastermil...
Website: mastermilo.com/

[@gguevaosc]

This is by far the most helpful video I've watched. My car's starter was doing the exact same thing. Cleaned and put back on and car started right up.

[@snowdaysrule]

This was very cool! Everyone always says that "the starter is bad, needs to be replaced" so seeing someone take one apart and clean up the corrosion to get it working again was neat. I recently "fixed" my car that wouldn't start. I did a little investigating and inspected the starter and figured out the starter wasn't working because a wire had come unattached! Bolted it back on the solenoid terminal it belonged on and car started up no problem.

[@azonicrider32]

Thanks a bunch for the well translated subtitles! Great explanation and well filmed as always.

[@onivlasbrony7432]

I really prefer these videos where you are fixing rather than destroying stuff. And we get to learn something !

[@jbicee]

Thanks a ton for this video. Not very many videos online where someone is willing to tackle disassembling a starter. Its almost a lost skill. Was able to fix the starter earlier on my 1994 chevy k2500 which had a stuck solenoid. Cleaned the contacts inside the solenoid, greased the plunger and upgraded power cables and now she starts first crank.

[@ClotEastwood]

I've had loads of problems at work with our starter motors (lot's of machinery) I've cleaned the comm and freed off stuck or worn brushes. . . and had great results. . . but I have never tried this . . . I never thought of it. . . . I'll be doing this every time I strip one now. . . THANK YOU my friend

[@ken2633]

I don't understand a word he said. He could well be speaking Dutch. But his step by step tear down, cleaning and polishing the commutator and test run after the works is crystal clear. Thank you.

[@marijn-gd6cp]

ik vind het echt leuk om te zien dat zo'n kerel op een leuke manier uitlegt hoe je een beetje moet sleutelen. echt tof man!!

[@foxmoulder2430]

Mastermilo ist ein echter Künstler, mit Hervorragenden Fähigkeiten. Einfach Großartig.

[@SadakoAsekura]

I like the way the dog is crying because of the forklifter doesn't start

[@silschoones180]

SadakoAsekura i

[@izacizac0074]

on finished the dog has something for celebrate, cheers!

[@claxeekhout1239]

rib dog

[@Daanteloo]

Thanks for the spoiler

[@firozosman]

that was chewbacca. he wants to drive.

[@maronkii3468]

Had the same problem on my Toyota. Copied what was done on video, and starter works like a dream now!

[@jim778]

Great job ! I learned from your video. I didn't know a starter could be cleaned like that. Thank you for your video, Jim in USA

[@wyattandwill12]

Sometimes when people replace their starter they don’t really need to! Especially if you’re doing it yourself so you don’t pay labor it’s worth a shot to clean or sometimes even rebuild the starter. The copper pieces in the solenoid can also be rebuilt or flipped to recondition it.

[@alexvdvelde]

Ik gun deze geweldenaar een vette loods met brug en giga werkbank. Top Milo ik hoop dat je lekker doorgaat met je geweldige video's

[@kylebroaddrick1222]

Your video helped me get a motorcycle starter going. Thank you so much!

[@chilman6461]

Its good when a plan works

[@neilburns6118]

Very very amusing video. I love the bit when it starts the fork lift. Brilliant!!

[@DirceuCorsetti]

At first I thought there was some odd whine when starting. Then I realized it was Diesel crying for attention.

[@MyFabian94]

Petrol. You caan actually see the Plug Wires.

[@MyFabian94]

Point taken.

[@Foldingblade]

Same

[@mastermilo82]

Diesel is gets excited if I start engines. Also this starter was very interesting for him.

[@laurentiu.panait2536]

Dirceu Corsetti The forklifter had a supercharger, that's why it was whining 😂😂

[@jimdoumbos4468]

I didn't understand a word this guy said but I learned to pull a starter apart and clean it. Thanks mate

[@maureno067]

Jim Doumbos it has subtitels

[@shed.projects5150]

You may just have saved me a LOT of cash. Thanks for your trouble, your a star.

[@elaineclark7508]

A bit shocked you put the parts on a gritty floor and not a mat but it worked and the advice helped a lot, thanks!

[@nen.user.3764]

Great video, thanks. My problem personally is starter bolts were loose when i looked under . Happens every year when it gets cold. I put some blue thread locker on it so hopefully it stays put this time.

[@milotorres6894]

My bug 63VW solenoid was lazy applied same concept never thought about cleaning armature thanks anyway from one Milo to another good job love Diesel's cries memories of my cindie bear brought smile to my ❤️.

[@joopdehond7697]

ik denk dat jij (bijna) nooit naar een garage hoeft, lekker alles zelf doen en repareren. Tof hoor en leuke leerzame filmpjes.

[@semgaatstuk3355]

joop de hond ja klopt

[@OlivierVanHeulen]

haha hoe kan dat nou een hond op youtube vet gek

[@nielstrkwld6459]

Olivier Van Heulen jij hebt te veel op kakhiel gezeten😉...

[@DennisSnek]

Wat ben jij een hond.

[@Engineer9736]

Punt is, als je een nieuwe auto koopt, en je begint er zelf aan te sleutellen, hoef je vervolgens ook niet meer terug te komen bij de dealer voor garantie ;)

[@SandervV555]

omdat ik aan motors pruts wist ik niet waar het euvel zat van de startmotor van mijn bus, maar toen er werd uitgelegd dat het relais werd bekrachtigd wist ik gelijk wat het euvel was. Dankjewel .

[@BrouwerHungary]

It's so cool to see you can solve every problem, we can learn from you! ✌👏👍💪💪

[@sailorbob74133]

That was really entertaining - it was like watching the Swedish Chef from the Muppets excepts in a garage instead of a kitchen! Very informative as well!

[@renatoo618]

Merci, très bon travail, excellentes explications. Et vous êtes crédible. Good day

[@rickydee9761]

That's genuinely helped! Many thanks!

[@Rob_Huskett]

Thank you for your video, my problem was the positive to the solenoid had rusted contacts. Your video saved me some money and got me mobile again. At least until i can get a new starter. Appreciate it😁👌

[@djyul]

Great!was about to rip my stater apart,but didnt know what the little wire point was for. Nothing wrong with my starter,wiring problem! New wire clip,problem solved! Dankje man!!!

[@Columbariusify]

thanks for knowledge and experience!

[@Kalashster]

Thanks for video! Cheers from Tbilisi.

[@richardc1983]

Excellent video and very well explained. Thank you

[@OMGWTFBBQSHEEP]

Great vid, Milo! Really liked the way you edited this one! And learned a lot!

[@mjm7187]

Great video, thank you. . I've got the same starter in my kubota b5200 D, same issues.

[@shacklife]

Hopsaké, bij deze start mijn traktor terug. Bedankt om deze geweldige tutorial te maken!

[@epicgram]

ik ben een elektro ingenieur, en ik heb zelfs nieuwe dingen geleerd van deze video. Mooi man, ga zo door!

[@davidk8699]

Really helpful - thanks :) My commodore is starting but labouring - this will help with a fix.

[@HetAutoKanaal]

Kijk dit zijn de dingen waar ik nou echt iets aan heb. Top video!! Dankjewel

[@paul8028]

Thrugh the magic of automatic translation i could watch this video. Good job! Great video!

[@the_bloke_that_cuts_the_grass]

Very good video, you have the gift of making something that isn’t very entertaining, very entertaining!! Thank you

[@quirksandfeatures3215]

Useful information

[@Jarred_Anae]

Thank you very much. Enjoyed watching your helpful video

[@eurotrukgast3439]

ik vind deze uitleg filmpjes top ik leer hier meer als op school

[@stefanmeyers2808]

You have a great attitude, I loved your video.

[@Man_v_Cars]

Great video, many thanks.

[@wahyurindarmanto7250]

very helpfull...thank you

[@davutyalcin-]

Mooie video man,dankzij jou video heb ik mn startmotor laten reviseren. Motor draait nu weer perfect ,thnx 👍🏻👍🏻

[@WCSPete1]

Brilliant! Learned a few more tips again...Thanks..!

[@MorbusSchmorbus]

So... that should have been obvious for me, but i actually learned something on KZbin today. Thanks mate.

[@niekvanleeuwen1259]

bedankt voor als die leerzame video's ik leer hier echt veel van ook voor school daar snap ik nu veel meer van dankzij jou

[@LeMecanoDuDimanche]

useful video, thanks !

[@dastanharris]

Thank you, very informative.

[@jameslorenz7943]

giving it a try. thanks

[@BenDeSwert666]

geweldige video! heb er echt van genoten!

[@mattgale3793]

I enjoyed watching and learning

[@c7uk]

Thanks for this - I checked my starter yesterday but I didn’t bridge the terminals... will try again now!

[@farmingboys5918]

Poah geweldig emile wanneer ga je de rollgolf testen

[@michaelboadi7365]

Nice work

[@andreramos945]

Thank you master Milo

[@shingerz]

Great video 👍

[@remobiliselimited8082]

Top Class - no bs - great videos !

[@j.merkus]

Jaa! De startmotor doet het weer prima! Bedankt!

[@cowchicken1201]

Great job thanks 👍

[@michaelbrown6393]

lol what a lad! good video despite your lack of work bench space and untidy shed ;)

[@NatalieS.-bm8fn]

This made it BETTER for me. These are my working conditions :) and this inspires me. :)

[@paulsmakman2203]

Super interessante vlog!

[@Markehreyn]

Someone get this bloke a workbench! love your video brother

[@jeromebraganza3460]

Thank you boss for your video its really help to me...

[@azemhamzai1002]

Very good explaination, thanks

[@Dhrboss]

thx weer wat geleerd

[@thuylannguyenthi1189]

Very good and thanks you for video

[@user-vv8vh5dp5t]

is de deutz bull dozer er ook nog

[@ianwinter100]

You're brillant!! Thanks :)

[@repje2010]

Zeker een nuttig filmpje! doe zelf ook alles zelf maar met die startmotor nog nooit zo aan gedacht loll :-) dank Meester Milo !!

[@rubendevries8520]

Gaat weer goed Milo ga zo door👍🏻

[@BillSikes.]

Nice one bro, and thanks for the English subtitles 🤙

[@zeljkokajic3142]

Very nice video! Regards from Croatia!

[@pilotlang1]

Great video my friend!

[@kishorejamatia8914]

Very very good video . Thank you brother

[@musicmonkey1983]

so satisfying when it starts :)

[@mokick6614]

Leerzaam filmpje thanks👌

[@00BillieTurf00]

Woooow, zeer onderhoudende video! Ooooh echt top, thx!

[@JeremyHen]

Wat een geniale vent ben je ook, bedankt hè Milo.

[@gijsbouma4528]

Super leuke video!

[@malibu188]

Some years ago a bloke purchased a Mazda RX7 rotary that wouldn't start due to low compression. So he wired 24 volts to the 12 volt starter motor and away it went :)

[@MarkosManiadakis]

Good job!!!!

[@vanveen8472]

thanks for that, I wish I had seen this before I replaced my starter motor in my Toyota which I did yesterday

[@ttautogarages]

Great job..👌👌👌 thanks..

[@Medolino2009]

geweldig werk met startmotor

[@mr.cangieter8758]

Goed om weer even Nederlands te horen.

[@Juulbakker33]

Goeie uitleg!

[@_RhenzPlayzPH]

Love that tractor in the background.

[@WRolandoQ]

Thank you bro...

[@johanvanherreweghe9898]

Ga nu de startmotor van mijn grasmaaier ook op poetsen. Hopelijk heb ik ook succes. Alvast bedankt voor het leerrijke en leuke filmpje . Gr Johan

[@izzzzzz6]

Nice work bench

[@milogutovic5]

Good video dude, nice work.

[@Xrater96]

The dogs sympathy was hilarious 😂

[@thijsvanwieringen8021]

Echt een top video, vooral heel leerzaam!

[@based1781]

nice video

[@kumaranchandrasaigran149]

Thanks brother. 👌

[@2fast4uFED]

Hilarisch ook dat rondcrossen op die forklift aan het eind :') Tnx voor 't filmpje!