Matt’s Off Roads Bombi Gets Sand Blasted And PowderCoated!!

It's not just about getting your name on this cool truck-it's about staying safe on their 10,000+ blue trails, utilizing the user-friendly app, and unlocking endless possibilities with OnX maps. Click here: bit.ly/3Pg6bA9 to save 20% off your OnX Off Road Elite Membership.
Once your purchase is complete, go to the OnX Offroad app and fill out this form: www.onxmaps.com/offroad/robby... to enter your name for the tailgate wrap. We’re about 30 names away from being completely full!
Haven't found your name yet? Don't worry! Once we hit 200 additional names, we're grabbing a Sharpie and writing more names on the tailgate. Act fast because this is your last chance to become a permanent part of our OnX off-road legacy!

[@RobbyLayton]

It's not just about getting your name on this cool truck-it's about staying safe on their 10,000+ blue trails, utilizing the user-friendly app, and unlocking endless possibilities with OnX maps. Click here: bit.ly/3Pg6bA9 to save 20% off your OnX Off Road Elite Membership. Once your purchase is complete, go to the OnX Offroad app and fill out this form: www.onxmaps.com/offroad/robby-layton#robby-login to enter your name for the tailgate wrap. We’re about 30 names away from being completely full! Grab some merch and help support the channel: www.robbylayton.com

[@LeDrew8]

Robbie. The best way to look at someone welding without a proper shield is to look at it through your phones camera. 🙏

[@marvindebot3264]

I'm assuming you can oxy weld and braze. If you do those you can TIG weld since it's the same basic process just with a different heat source.

[@rodney1818]

It's easy they have this little thing that looks like a soldering iron but it's an engraving gun it works like a miniature air hammer

[@rodney1818]

Wait until you turn 50 and you've used your hands for hammers your whole body work career you just think your hand shakes now

[@rodney1818]

So neither you or hillbilly we're watching what Kevin did with the gun

[@MattsOffRoadRecovery]

So awesome!

[@J.Images.Photography]

Much Respect to Matt, Mrs. Jamie and the crew 💪❤️

[@BarFlyChef]

BombBee is going to be sweet like honey!

[@RealRickCox]

I've taken a few of my projects for Kevin to powder coat... wouldn't have known about them if it hadn't been for you. They've always done a GREAT job and the girl at the front desk is really nice.

[@Spaltyslife]

She sounds really nice

[@terrycrews9369]

The new hand position standard is 9 & 3. Safer because of the airbags and facilitates the use of shuffle steering. Shuffle steering is now taught as opposed to hand over hand.

[@Thom1973]

9 and 3 might be where you are from but here in Canada it is 8 and 4

[@35manning]

​@@Thom1973it's 9 and 3 in Australia

[@Thom1973]

@@35manning Thats kool

[@avlisk]

Dr. Pepper says it's 10, 2, and 4.

[@dgberry01]

And don't hook your thumbs

[@808SSCamaro]

Correct hand position is one at 12 o’clock and the other around Boss 😀 Thanks guys for sharing! Crazy the amount of work powder coating is! Wrap looks Great! Take care and have a great week!

[@RobbyLayton]

I agree with this

[@martykitson3442]

Only if Robby is the driver 😁😊

[@miked19831988]

I thought it was 12 o clock and other hand on "your shifter" going through the gears🤣

[@hardwurkindaddy]

Speaking from experience, if you get in an accident with your hand at 12, you WILL punch yourself in the face really really hard when the airbag goes off. It hurts.

[@AFloridaSon]

Thanks for showing us how the powder coating works. Kevin seems to be getting used to you throwing a camera in his face - lol.

[@rustynail2205]

Kevin and crew, thanks for letting us watch the process. I knew the theory but never saw it done. Thanks for letting us follow along.

[@macgyver03ga]

My wife has the same “cup problem.” She has enough Stanleys and Yetis for almost every day of the month. Literally an entire cabinet in the kitchen full of them. I have 2 $12 plastic copco coffee cups I have used for years (currently drinking my coffee from one while watching this). They last 5-6 years til I drop it hard enough and crack the lid, then I’ll buy a replacement.

[@maxironpaw]

Your wound is healing nicely. Def better than superglue and electrical tape.

[@ScottDeVoreSeabee02]

My chest congests just watching that 🤪 Pretty cool that Kevin and his team let you guys come in and do some of the work. I really liked how Kevin walked us through the process.👍😎🇺🇸 Merry Christmas 🎄🎁🎊🎉

[@ggalland1]

Powder coating is a big process. Super cool they let you come up and have a hand in it. Wrap looks awesome on the truck! Thank you so much for showing all the names and for sharing

[@duanet3218]

Thank you for scanning names!!! I saw mine and it was very nice to be honored is such a way! @ 33:05 Duane Treat I've always been a TREAT to everyone I meet!

[@craigchaffin8210]

Love the new wrap on the truck looks awesome and thanks for showing all the names…. My membership was a gift and to see my name and my service dog Georgia’s on there made my day thank you

[@roostingthe6520]

Kevin's got a badass shop but time to invest in a good dust collector system for his blasters. I have one on mine and when blasting seeing inside the cabinet is no different than seeing outside of the machine. It'll save him crazy amounts of time.

[@dubious6718]

There are hoses underneath and what looks like some kind of vacuum behind them, so they probably didn't turn it on..

[@azfires000]

I’m so happy to see my name as an elite section on the On X Off Road truck !

[@dieseldirtdude]

you mentioned 7 and 5, this is because if you get involved in a collision, and the air bag deploys, with your hands up higher on the wheel, you punch yourself out, as it hits your fore arms, LIGHTS OUT !!!

[@mcaraballo7100]

Would you like a pat on the back 😂😂😂😂 genius 👏🏼👏🏼👏🏼👏🏼

[@briangalloway3684]

Cap. It's smacking your head off the bag that knocks you out. Hyperbole much?

[@jamesbigham9036]

OK is that a joke or actually true? I laughed way to hard at that

[@tiredagain6722]

Hillbilly is correct. Hand position is 4 and 8 so that when the airbag blows it doesn't break your arms.

[@lockdoc600]

This is the correct response. The main reason for the change is so you don't have two broken arms.

[@michaelnieman6218]

I had an accident in a Ford van and getting hit with an air bag is not fun at all damn near broke my glasses knock the breath out of me for some time too THANK GOD I didn't break my ribs again nothing worse then breaking your ribs

[@nicks8917]

The Stanleys.. so many Stanleys. I feel it Robby.

[@rhondasweeney7271]

Awesome video! Thank to the shop that has done the powder coating! Thanks for sharing! 😊

[@teamidris]

Excellent, I learned a lot about powder coating and why I wasn’t getting the product I wanted from my local coaters. I gave up and went back to the paint booth.

[@stephbailey7255]

Family time is priceless! What an adventure, and the views were beautiful!

[@colbywarner1944]

Got On-X because of you guys and love it, also found my name! Keep up the good work, plan on bringing you guys a classic car to paint in the next couple years

[@sandkworkshop]

Love how the powder coat process works. Need to have some stuff done.

[@roderickmoyer9851]

Thank you for sharing the powder and epoxy always fun to watch this happen

[@fhgaylor]

Obviously there’s a lot more to your shop than what we see on your channel. I don’t know about anyone else, but I think it would be cool to see a tour of your entire shop and your other employees that keep your business rolling while you work on your channel and special projects.

[@alexpearson8538]

Robbys shop is really well set up and equipped. And every one of his crew that I've interacted with have been super pleasant. He knows how to get some top notch people!

[@richwood8650]

I remember walking inside the oven with a flashlight to inspect products. Amazing how long a person can withstand that kind of heat.

[@jamesbigham9036]

Good morning Robby i like the truck the wrap came out incredible. Seeing the powder coat process was definitely a fun experience to watch the process being done

[@SebastianR111]

The hand position is where the turn signal and wipers switches are. On older card, the switches were more upward, that's why the 10 & 2 position. On newer cars, they are lower, mostly at 9 & 3 (also to facilitate shuffle steering)

[@gillesbelliveau660]

It has all to do with the air bags deployment.

[@johnc.wunscheljr2873]

That was good to show how to do . Thanks Keven and Robby

[@jeremiahsmith7977]

I use to build the M2 Hoods for the Freightliner trucks at Molded Fiber Glass my mom has been there for 35 years now she was there when the M2 model came out and we are the only plant with the hood mold so that means that your trucks hood came from Morganton North Carolina, that's so cool I didn't know your truck was an M2 until just now

[@danielmurphy9140]

A real professional with powder coating. Learned a lot. I have contracted to have stuff power-coated for the military. Learned a lot.

[@retiredchiefcharlie7451]

Awesome to see my name on the truck. 30:32 👍

[@hopeless1434]

I love my onX ive been using it since May. Has helped me from getting lost in the Oregon dunes several times.

[@jonmcfarland3832]

That powder coating session was super cool, was always interested in how that works.

[@oscarschmidlappen2302]

The best steering wheel position is Twenty minutes to Four . . . avoids the SRS, and relaxed arms makes for a relaxing drive.

[@garychaiken808]

Great job guys. Thank you 😊

[@Questionable_creations]

I prossesd all that and im glad, i have an eastwood powdercoating system so learning anything about how to get a good end result im all ears 👂

[@michaeltablet8577]

Colton is a great addition to the channel! Great video!

[@mcaraballo7100]

You are one lucky man ❤ Demri is the type of girl that you can't have just one lol I would be addicted too❤

[@user-dy4jd6bt9v]

Happiness cannot be travelled to, owned, earned, worn or consumed. Happiness is the spiritual experience of living every minute with love, grace and gratitude.

[@tonybucca5667]

I scanned the QR code right from the video...WORKED!!!

[@saintracheljarodm.holy-kay2560]

That was pretty cool, have a great great week and count your blessings amen.

[@garywatts8543]

Amaziing stuff! Love the wrap!

[@taylormade710]

Robby, since you are an example of who to follow the laws of the road, you should always wear your seatbelts

[@dunriteservicesservicedogt5757]

Hand position on the steering wheel is now 3 & 6. This is the best place to have your hands/arms of the airbags employ. Airbags sometimes create burns on the arms as the debris comes out of the steering wheel.

[@thatoneguy4life]

Hell yeah!!!! I’m on the truck!!!!!

[@andrewcooper8980]

Man I never tire of listening to professionals.

[@01cdave]

Robbie, thanks for SHINING!

[@jaytee66]

Props to showing everyone their names I love this channel

[@devinruthruff4982]

Just watched Matt's video of him getting the corvair seen he was gonna stop buy to see you but ur doing this lol love both ur channels keep up the good content for us to watch on weekends 👌🏼

[@timburton1715]

Awesome 👏 Show... Love ❤️ Your Channel... Keep Up the Great 👍 Jerb...!!

[@redbeard499]

Saw my name! Woot! Truck looks great!

[@TheOldaz1]

Nice job and a new experience for the crew. Truck looks goood.

[@edwardsimmons3721]

The Bombi is looking good. The truck with all the names on it turned out great.

[@UtahOutlander]

Robby Layton The Great 😅👍 Found me and Keira! Yay! Can't wait to see the Bombi when it's done! Thanks for sharing the process!

[@mvrkusxx]

Seen my name on the right front.. Thanks for that... would have never seen it here in Texas.. 👍

[@dzymslizzy3641]

It's 9 & 3. That's what I've always done that felt most comfortable and safe...even back when they used to say 10 & 2! 😀

[@andrewcooper8980]

Prebaked?! That’s like smoking a pre concert joint before your concert joint 😂

[@P-J-W-777]

Kevin’s metallic powder coating work looks absolutely awesome. Kind of wondering if they can do candy or pearl coating with metallic as well.

[@darrinsteven7002]

Tiger Drylac can grind what ever colour you like. As can Duracoat. Most powder is sold in a 25 kg box. Outside of standard colours is very expensive.

[@P-J-W-777]

@@darrinsteven7002 that’s awesome thanks!

[@phatdaddy1955]

Great vid! I'm always impressed by...what would one call it? A UTAH attitude. Friendly, professional, respectful, compassionate, and being just plain good folks. It was evident in March at Sand Hollow! Loved meeting you all and you all are the real deal! Blessings and Merry Christmas!!!

[@adenemery7802]

That truck looks amazing!!👍👍👍

[@stephenpoe2037]

Awsome ! Thanks for sharing !

[@psg6314]

Great video and happy holidays and stay safe and God bless from GA

[@garretlewis4103]

The wrap turned out pretty good. You aren’t kidding. Powder coating IS expensive.

[@dalejohnson1555]

Really loving your food recommendations!

[@KensHobbies409]

Best position is 9&3 as 1st lesson I learned in racing & now most steering wheels are made that way for reason also of the Air Big in steering wheel. As for the Powder Coating, that is very interesting of how it is done.

[@davidleslie1963]

I love seeing the process! Sandblasting is amazing. Hillbilly is still being a tool. Some things don't change.

[@Gears-Wrenches-Rods]

Great video, I’ve never seen the powder coating process done. I did see my name on the truck❤

[@princ3ssros340]

Everyday is something NEW to build a better future tomorrow Thank you Kevin 🎉

[@jackedwards7420]

Awesome video on powdercoating, and I saw my name on the truck!!

[@darrinsteven7002]

Our powder coaters wear full Stay Puff Marshmallow suits with an independent temperature control air source. Powder is hard on the health. A shop in Sherwood Park Alberta had their powder coater die of lung desiese after dust mask painting in less then a year. He was in his early 20's.

[@kimetherington2252]

Cool video guy's! Powder coating ain't no joke! The ON-X wrap made for a great advertising for their off-road trails! Til next time, see you then. 😊

[@major__kong]

DuPont used to make this stuff called 5718S. POR-15 Metal Prep is equivalent and still being made. It does a light zinc phosphate conversion coat on steel similar to a process called Parkerizing making it more rust resistant and producing a better surface for paint bonding. I believe auto manufacturers dip their frames and bodies in something similar. I probably wouldn't worry about it in the desert but would consider the extra prep step for other parts of the country. You can also shoot an epoxy zinc phosphate primer for extra corrosion resistance before the paint layer.

[@Makapo3791]

You guys should try Playa Azul next time you're in Salina or Richfield. Not saying they're as good as the Vegas place but they're pretty good.

[@brianabbott2255]

It's just 12 with the right hand like an O.G. lol

[@davidbingham7404]

Awesome video Robbie and crew.♥♥♥.

[@6zeek9]

Experts at the National Highway and Traffic Safety Administration (NHTSA) now recommend 9 and 3 - on opposite sides of the wheel halfway up - as the ideal steering wheel hand placement. The 9 and 3 steering wheel hand position maintains good control over the wheel while reducing the risk of injury from the airbag.

[@Farm_fab]

Robby, Arcaptain welding equipment makes a nice tig welder, and might be a good starting place for you to learn on.

[@northidahogurl999]

I have had OnX for a couple years so sorry I couldn't be apart of it but OnX rocks we love this app specially for hunting or you know off road out-of state driving lol. That power coating turned out awesome. You can never have to many mugs Stanley or Yetti lol we all have our addictions lol could be worse ha ha 😂😂🎉🎉🎉❤

[@genesiedenburg9798]

Cool video, never knew much about powder coating .🇺🇸

[@johndoran3274]

I don’t know why I Just sat here looking anxiously at my screen until I saw my name on your truck. It’s like watching the lottery numbers come out I guess. Thanks for the great content Robby!

[@wolfgangricky]

Saw Tom Tom starting on your Jeep. Matt has the banana & tangerine. Sure you'll do your's blue, so why not the Blueberry ? Ty for taking us along

[@1a1u0g9t4s2u]

Guess I qualify as an old timer as I come from the days of 10 & 2. Wonder how many viewers remember the term 'C.O.D. turn'? Can't do those with modern cars because of the form fitting seats and seat belts. Great video Robby, thanks for sharing.

[@InjunOutdoors]

Make the old headlight holes into storage bins accessible from out side

[@marklar7551]

While cruising your hands on a steering wheel with an air bag should be below 9 and 3.. so cool to dive into PXC since they do such good work

[@mikemorris4409]

To add to Kevin, most modern guns have auto-variable KV adjustments. Set it to 80KV and forget it. Also, watch shaking the gun, you preheated the part for better transfer and any spit will not blow off as the powder will already start to cure. I typically only preheat metal that will not hold a charge for that reason, but the Faraday effect makes corners hard if you have the flow jacked up. Epoxy, I would typically start with the corners and let the flat surfaces get painted via overwrap, laying out about 3 mills on flats and 2.5 mills in corners. Coating/Curing it once. 15 minutes at 435 (or whatever the coating recommended). If heat was the method of transfer, then 3 to 4 times depending on what the mill reader was telling me. (Nordson certified, 15 years experience, 10y commercial, 5y job shop). I like it when you guys go see Kevin, I miss coating. IT Guy now and have been for 17 years. (yes I'm old).

[@montevcarpenter9449]

THANK YOU, I SAW OUR NAME ON THE TRUCK. IT WAS AMAZING

[@nibigdave]

Love the look of your truck all the best from dave in Scotland

[@davidsoutar8508]

it's 9:45 and 10:15. That gives you an extra half hour to get to wherever you're going

[@richardcarrier367]

Love it saw our name !

[@gsmhnc12]

Elf on the Shelf- "Note to self: Robbie had the best pizza in the world and did not bring any back to the boss. VERY naughty."

[@nsa_surveillance_orb-42b]

You mention Milwaukee tools stuff all the time, it's rubbed off on me. Thanks to your love of the brand, and their enabling your addiction, I have been replacing all my POS substandards with some serious quality tough Milwaukee gear. Thanks for fueling my tool addiction! Ooh look, a new cordless impact for Christmas! Lol

[@MartinRodriguez-yr4gf]

It cracks me up that you bring a huge assortment of tools and use a cresent wrench to take out bolts

[@J.Images.Photography]

The truck looks Super badass

[@MarkJacksonGaming]

They changed it to 9 and 3. For the airbag. I still palm it :)

[@user-up4ee4lh8z]

I always have a tape measure, cresent wrench and a pair of vice grips with me at all times.

[@berniegilles4110]

I've had so many projects I wanted to powder coat, but I'll have to find someone local here in AZ. Ha! wasn't sure if I got in on time but saw our name on the truck at 30:08, awesome!

[@RobbyLayton]

I’m glad to hear you got your name on the truck!!!

[@waltbury]

My wife and I were watching your video. She thinks Robby is funny guy, she really enjoyed it.

[@carlomadrid2505]

Love you guys always great work

[@UncleManuel]

I smell a new channel in the future: "Robby Layton Food Reviews" 😂😁😜