Blade guides for my 26" bandsaw

Making the blade guides for my big bandsaw. These are the same design as the ones I made for my 20" bandsaw back in 2016.
woodgears.ca/bi...
Plans for this bandsaw: woodgears.ca/b...

[@vertigo72480_official]

Matthias with the sarcasm. I freaking love it.

[@Mrlaughy99]

I'm currently building your 20" bandsaw and last night I got it powered for the first time it was very rewarding and is running great. I too haven't actually balanced the wheels yet but they seemed pretty well balanced just on there own bearings. I also did the same thing threading the bolt in for the upper guide block but I added some glue too. Love watching your videos!

[@spinningchurro]

I’m so happy you’re healed up and doing big projects again.

[@gizmohawaii]

On end grain tap threading after drilling a slightly smaller hole I use Hot Stuff (CA) and spread it all around in the hole with a BBQ stick. Let it setup and re-drill the hole to ream out excess then tap. This for me makes the threading hold and last for a longer time. Cool Band saw build by the way !

[@Didin95]

I enjoyed watching some of your videos and it taught me a lot

[@bird9455]

Why not all of them? Are you some kind of hater?

[@Didin95]

@@bird9455 No friends, it's not like that, I'm just saying that because I haven't watched all the videos on this channel

[@matthiaswandel]

'com on, you can do it! :)

[@Didin95]

@@matthiaswandel thanks i will do it 

[@brodystowers8092]

Ahhhhh. Another wonderful morning. Matthias posted a new video! Please keep 'em coming for all eternity!

[@iainburgess8577]

Matthias aways manages a fascinating mix of beautifully finished & rough but ready that I always struggle with in making. Very fun to watch.

[@Loekamber]

okay, I won't remind you of the loose sleeve... But you wrote ediging there which might be worse

[@alejandroalessandro7820]

Think that's that cheeky Matthias trolling us

[@arlingtonhynes]

@@alejandroalessandro7820 I think you’re right.

[@AllenBrosowsky]

@@alejandroalessandro7820 Face it, there are trolls that have earned that.

[@_P0tat07_]

69 likes. Eyyyyy

[@reidflemingworldstoughestm1394]

Call me if you're looking for a annotation editor.

[@janhbrenna4264]

For some reason i never get tierd of bandsaw and dust collection builds, or anything else Mathias builds :)

[@chrisgriffith1573]

I really like the way you engineer the grips for your guide adjustment arms, very sturdy and secure. You make it look so simple, but I am sure you took several hours to get there... I watched your guide for Big Bandsaw Guides and see how much time you spent thinking about these details. Great reference!

[@DesignPrototypeTest]

I will always love Matthias. I found his Woodgears website first back in like 2012 then when I realized it was the same guy making KZbin videos I was super excited. Thanks for the videos! Don't ever quit.

[@rpavlik1]

Love seeing the process of these "rep-rap bandsaws"

[@Lucas_sGarage]

I get that joke of 3D printers good job bro hahah

[@qvatch]

The Gingery of wood.

[@joedrake4465]

But he's using wood, so wouldn't that be "rep strapping" ? :P

[@paulsmyers203]

10:15, shaking in reference to having a stand or not, you might want to look into trebuchets on wheels. I think what you're seeing is related to the concept that trebuchet designers use when adding wheels to their systems. I wish I could explain more but I was tricked into taking chemistry instead of physics in high school. :D

[@dannyjepp985]

That's so fascinating about the resonance frequency. I'd love to see you crunch some numbers regarding this when you get to the balancing.

[@davidcapes9629]

Funny how much time I spend watching this man make bandsaws.

[@ShopTherapy623]

When you have a tripod shot like that, get your camera in the focus you want, and then switch the lens to "manual focus." The focus will be set, and you won't go in and out of focus like you did there. Awesome video as always! I've already built your first band saw......maybe time for an upgrade?

[@vvvbbbbcccc]

Matthias, I've been watching your videos for years and I love them. FYI, I have absolutely no intention of ever making any of this stuff.Keep up the good work and keep on trolling the trolls.

[@DATTURTL3]

This was posted at the start of my shift today. I just got home. First thing I see and I’m happy I did!

[@jeanmike]

And here I am.... Bought the plans and still haven't started building mine. Hope I can start/finish it this year.

[@Bence205]

I absolutely love your machine builds. Seeing you tackle yet another bandsaw, i finally gave in and bought all your bandsaw plans. Super excited to start building in a few days!

[@MRrwmac]

Matthias, Another great walk through video. Makes me want to build some even if I don’t need them, yet! Thank you.

[@ManMadeOfGold]

Turning bolts (or cammed out philips head screws) into flathead screws is one of my favorite power moves!

[@nippocast]

First I put the like and then I watch the video, I trust

[@michaeljohn7398]

Brilliant as always 🙂. Thank you for sharing your experience and knowledge. Cheers from Michael. Australia.

[@kiwdwks]

Always amazed what you build! Not many can saw they've made their bandsaw...

[@Alex_science]

It is amazing the level of quality of your jobs! Congrats

[@DJMankiewicz]

I like how Matthias expresses frustration like a Canadian Hank Hill.

[@birigoboom]

Unlike the other Canadian, "FOCUS, you F*CK" 🤣

[@adammenz]

HEY... I didn't notice it till you pointed it out but your shirt sleeves are entirely your business!!! thanks for your content enjoy your creativity and ingenuity!!

[@daniel_bohrer]

Thank you, I couldn't have thought of a better comment! 😁

[@mpetersen6]

As to balancing the wheels. When building the wheels you could place threaded inserts every 30° (15 works better) and use those to attach you weights. The farther from the center of rotation the better. There are phone apps for checking vibration levels. Before I retired I used to have to balance large centrifuges for waste treatment plants after rebuilding them. Hey, it's a growth industry, every body poops. And every year there's more people. For centering the bearings on the screws. Just use short bushings either out of the hardware store selection or from plastic tubing if it fits.

[@yorkshirepudd7532]

I got plans from mat for a band saw years ago. It still runs sweet and has had plenty of abuse thumbs up from me

[@technikfuzzie]

Hey Matthias, I'm waiting for the Plan, i need a Bandsaw so much and the 26" is the perfect size. Greetings from Germany!

[@fnfjan]

Hey! Your shirt sleeve is loose

[@stingray4567]

I cant believe he didnt notice that in all the hours he spent ediging this video!

[@antraxxslingshots]

@@stingray4567 ikr? (kudos for including the spelling error...i didn´t even notice that the first time!)

[@niqhtt]

And I read that as that damn ocarina of time fairy...

[@enriquemacavilca7668]

Enrique, Desde Argentina, no entiendo mucho el inglés pero muy contento felicitaciones eres un fenómeno con tus vídeos aprendí mucho. Aunque aquí no hay las herramientas ni materiales que existen allá en fin me arreglo con lo poco. Saludos.

[@theobserver1219]

Great build! I see you as one of the standard bearers of woodwork! You inspire me to improve one video at a time!

[@user3141592635]

I have a tip when you thread machine-threads into wood. After the first round with the threading-tap, you soak the threaded hole with extra thin super-glue. After it has set completely, run the tap through the hole once again, allways dry and de-greased. Then you might want to repeat the process one or more times. Make sure the tap is clean before repeating. The glue cuttings tends to stick to the tap grooves and might damage the threads on the next pass if not removed. I use a needle to scrape the grooves clean. It flakes off quite easily. This strenghtens the threads greatly and protects them against wear as well. Do not use "Zap-Kicker" or Acclerator, just take your time and let the glue set as normal. Use parrafin-wax, bees wax, or similair compounds as a lubricant as needed in the final usage. Not oil or grease under any circumstances.

[@bird9455]

YOu, my friend, are a genius!

[@maxupp]

Hey Matthias, the shaking gets worse, because as you are adding weight you are shifting the natural frequency of the frame clsoer towards the frequency of the oscillation. Balancing the wheels is the way to go, or if you want to be fancy about it, add a tuned absorber.

[@leksey7870]

Great machine turned out! Saws easily, like clockwork. Good luck!

[@esotericsean]

I'm really grateful for all the videos you post Matthias. Does is ever feel weird to work on a project without filming it now?

[@bbrockert]

The angle grinder is an under-appreciated wood working tool.

[@antraxxslingshots]

I´d like to ask if the downward angle on the bladesupport on the upper guide isn´t counterintuitive. I know a downward angle might look like it guides the blade itself better, but wouldn´t an upward angle deflect stuff like clogged up sawdust way better then this "pit" that might even catch bigger stuff and get the blade stuck? I doubt that funnel shape is necessary since the blade is already "threaded in" if i might say it that way. A funnel helps if stuff is not guided from below right?

[@matthiaswandel]

That's why the bottom guides aren't downward. But the downward angle also puts the blocks closer to the workpiece, and wood in general wears less if it's rubbing out of the grain than in. Into the grain could lead to jamming if the blocks get loose too.

[@antraxxslingshots]

@@matthiaswandel Makes perfect sense, thank you for your reply.

[@canoetipper019]

Ilike the project...worts and all...like the frame falling just like it would for any average person...lol. Cheers from NB

[@nicolasgoosen5142]

You are a legend! I've learnt so much from your channel, thank you! Oh, and by the way, your sleeves were loose while sawing...

[@mirsimz]

10:54... I always enjoy your videos Matthias! Especially when the ediging is just right! 😂

[@KaleidoscopeJunkie]

Your attention to detail is always awesome. But showing at those gorgeous, brown eyes at the end is genius. Everything goes right out f My head and I have to watch the video a second time. :-) -KJ

[@latherookie]

Amazing job on this saw. I really am considering building one.

[@tlange5091]

focus dammit? I remember the saying differently. Anyways, superb video about making the guides with always new information. Thank you

[@stoffes]

you my man is a engineer and a pioneer in the industry

[@sdavidleigh6642]

genius at work.

[@petermoore9504]

If you can get some elastic strap 50mm wide or so you can make some arm bands you can put over any shirt. Snooker players used to use similar things with their shirts. Cheers

[@cbalan777]

The wobbling you described makes me think of those Japanese pagodas that have a giant beam and joints made to move and absorb the energy of earthquakes.

[@_P0tat07_]

Always a treat to see a new video, Matthias!

[@sergebeata7290]

Ce mec est un génie dans la vulgarisation de l'ingénierie !

[@mentaldemise]

Hey man, your shirt sleeve is loose! :D You're an inspiration.

[@johnfithian-franks8276]

I didn’t notice ether, I had to run the video again to notice so if you had not told me I would be none the wiser. I have already watch most of your videos three or four times, even your oldest videos as I have most of your plans as well

[@ciroarienzo8409]

Congrat for work and project from italy

[@PiefacePete46]

A family friend was using my father's engineers lathe, and his loose sleeve was caught by the chuck jaw... result was a shattered wrist in about one millisecond! Thanks for pointing out the lurking danger in your case.

[@ljoffe]

Being an engineer you should be familiar with how buildings are designed to survive earthquakes. They have liquid plates under the building so that the building can shake with the earth movement and not come apart. That is the same reaction you were describing with the wobbly base on the moving bandsaw. Just thought you would want to know. Love your builds.

[@byrdt6528]

You’re an impressive engineer!

[@matthijspw]

For holding bearings, I like to use countersunk bolts with a head a fraction larger than the inside diameter of the bearing. E.g. M10 for a bearing with an ID of 20mm. It is nearly flush with the bearing and keeps it nice and centered.

[@matthiaswandel]

yes,if you have bolts like that

[@carpdude73]

Nice! Looks like it cuts better than my Grizzly!

[@georgebayliss3291]

Coming along nicely, Matthias. Always enjoy watching you build your machines. Is it possible for a total (estimated?) build time to be mentioned when the saw is completely finished?

[@stevem815]

Second this! It's a cool project but I can't help thinking I could spend the time working my normal job and buy two bandsaws with what I'd earn in the time it took to make this one. I guess that's probably not the point of it all though. I guess that's kind of like looking at people riding bicycles and thinking 'but I can drive way faster'.

[@georgebayliss3291]

@@stevem815 I think the idea is he gets his own custom design to how he wants the saw to function, which a store-bought saw wouldn't give Matthias. I imagine he gets extreme satisfaction in and at the end of the building process.

[@wecksell]

I think there is static balance which you fix but dynamic balance that is probably the cause for your imbalance, that is, your cg is centered in the plane of the wheel, but you have weight differences in the other planes. See what a car tyre balance machine does when it spins the wheel.

[@eideticex]

Maybe foam and paver base to dampen the vibrations. Would have to play with the thickness of the foam a bit to find a good balance between stability and dampening.

[@BennettPictures]

10:19 Wow that's wild, its like the wobbly stand acted as a gimbal stabilizer

[@crackin2000]

You should make a clear plexy enclosure for something so beautiful.

[@johninsana313]

I enjoy your videos, and realize your plate is pretty full and you kind of do your own thing, which i respect. But would you consider making a video just about precision and errors. When you may or may not want or need precision, ways errors are introduced, how to avoid them , etc. In your videos you often comment about this but i thought it would be nice to have your take and thought process on it in one video. I was thinking about this when i see you trying to dial things down to a few thou and then wonder if its all for naught, as something like thermal expansion of the table saw or band saw blade or the axles might be double that amount

[@RemyTerjanian]

Yay more bandsaw content!

[@jacobomorales6287]

This guy is amazing!!! I watch from México.

[@michelevitarelli]

Amazing project. Thanks for sharing.

[@thallmeister]

Making good progress.

[@LeesChannel]

I've been watching the progression of this build and the quick an casual sawing, thinking to myself "geez, how often does he get cut?" Then right in the beginning of this video a healthy hand turns into a cut hand in the next scene.

[@MCsCreations]

Amazing work, Matthias! 😃 I'm almost deciding to build my own as well instead of buying it... But we'll see... 😬 Anyway, stay safe there with your family! 🖖😊

[@hassanal-mosawi4235]

Thanks for sharing that, good build!

[@Yonatan24]

Why are the lignum vitae blocks at an angle? So you can get more in the same space?

[@firsttpt]

For those of you thrown by the odd 18mm plywood dimension mentioned, it's just standard 45/64ths plywood as measured in freedom units..

[@spencerbass7142]

Interesting, it is a fun video to watch. You are quite handy.

[@MikeFyxdt]

How many band saws is enough band saws?

[@anderswegge6828]

N+1 where N is the number of bandsaws presently owned.

[@daniel_bohrer]

It's the same as with clamps.

[@MikeFyxdt]

@@daniel_bohrer - Clamps formula N+2, because all clamps should have a twin.

[@bobweiram6321]

"Focus dammit..." AvE (family friendly version). LOL!

[@matthewgarland693]

You f$%&! My thoughts went to the same place, I was willing Mathias to say it.

[@MuhammadDaudkhanTV100]

Beautiful ideas brother and cool content

[@bajelman]

Could you have used the shadow of the blade to find where the blade lies on the frame?

[@matthiaswandel]

it would have been more work to get the right kind of light aligned accurately enough for that to work.

[@martinsch565]

Why is the top bearing not rotated by 90 degrees? My inituiton tells me it would run better that way, but I have i seen it like in the video in a lot of bandsaws so it must have some advantages. Whats the reason to have it like this?

[@matthiaswandel]

too noisy running that way.

[@Hoaxer51]

Matthias, could you at some point explain the best speeds and pulley sizes that would be best used in using a band saw to cut metal? I know that you cut metal at times and it would be nice to have a saw set up to cut metal especially if you have multiple saws.

[@matthiaswandel]

you need two stages or reduction to cut metal. I have a video about cutting metal on my bandsaw.

[@Hoaxer51]

@@matthiaswandel, I’ll check it out, thanks!

[@CortVermin]

if you look close at 10:57 you may notice that your sleeve is loose.

[@deepotter3755]

You freaking kill me man... so damned funny. "Ediging"

[@dboysix26]

Could it be that by adding that weight at the top you were changing the center of gravity of the machine. Because with the blade on the two wheels are now one whole unit of balance. I would imagine by putting same weight In the middle of the machine may make a difference. Maybe?

[@ParsMaker]

nicely done

[@chrisgriffith1573]

Love hearing the kid's video game upstair while you are trying to figure out the balance for the wheels... lol.

[@matthiaswandel]

its a piano

[@THX..1138]

I'm thinking the shaking was coming more from the bottom wheel. It got worse when you put the weights on top because you were in essence placing them at the end of a lever the imbalanced bottom wheel was acting on.

[@iamcreative5214]

I hope one day i used it

[@ajl9491]

Mathias can you do some holding strength experiments on tapped holes in wood?

[@matthiaswandel]

yes, I did at some point. I broke the bolt.

[@wolfman75]

Looking Great!!! Loose Sleeve!!!! Did you also see the almost kick back on your table saw? Thank You for sharing!!! 😃👍😁😲😎

[@Monfred2008]

Best big project

[@DanielH]

You have a wobbly band saw

[@themastermason1]

I always come back to Matthias's channel after someone tries to talk my ear off about 3D printing.

[@TWX1138]

Yeah. 3D printing has its place but it seems like a lot of people want to claim that it's superior even for applications when it really isn't.

[@RoamingAdhocrat]

3:06 that is not the AvE-approved phraseology

[@recklessroges]

Wood elf was here before Uncle B.F. [Keep yer stick on the ice]

[@BeeRich33]

It comes from "Oh Canada"

[@RoamingAdhocrat]

@@recklessroges I can't here "Thanks for watching" on any channel without filling in the rest.

[@Rich-on6fe]

I think your focus prayer had the wrong wording.

[@Hoaxer51]

Hmm, I guess I’ll have to look up the meaning of prayer now!

[@ricksolari9570]

You're amazing!

[@richardpatterson4312]

I'm going to build this bandsaw. I want to have 16+ inches of resaw height. Maybe closer to 18. Is it a simple as making the frame taller? Will I sacrifice other features or usability in doing so? I'm sure the blades will cost more but in terms of detail work, stability, etc. Thank you.

[@SuperJamster1]

OH, I have those same workshop shoes. :P. For some reason I love the reference to out of balance,, but be careful of your loose shirt sleeves and that resonant frequency. I'm enjoying this build. Thank you,