Maverick X3 Turbo- Front cover removal and Daytime running lights install.

In this Video we remove the front cover of the X3 turbo in order to install Daytime running light/signature lights.
We go through each step so you can understand exactly how to remove front cover and install Signature/daytime running lights yourself!
We also list the tools needed for job.
*************************************************
OEM running Lights Link...
Can-Am 710004994 - LH Signature Beam : Fox Powersports Can-Am Partshouse
www.canampartshouse.com/oempa...
Can-Am 710004995 - RH Signature Beam : Fox Powersports Can-Am Partshouse
www.canampartshouse.com/oempa...
***************************************************
Amazon link...
Check this out at Amazon
XTC Power Products Front Turn Signature Light Set For UTV Can-Am Maverick X3 www.amazon.com/dp/B07LC3KW8W/...
***************************************************
Alternative Replaces OEM...
Can-Am Maverick X3 XDS XRS Max R LED Turn Signal Kit w/ Signature Ligh - pazoma
www.pazomaracing.com/products...
***************************************************
Recent Uploads...
Front cover removal and Front running lights install
• Maverick X3 Turbo- Fro...
/ 885140158934410

[@crosscountrytouring3678]

New x3 stock as well, great video and like how you broke it down for us! Looking forward to watching your other vids on the x3. Thx man!!

[@Luke_Cullen]

Very good filming quality, makes it very enjoyable to watch

[@matt5420]

Great video, very detailed. Was going to drop my 21 xmr rr off next week to have them switch out facia since I cracked it this weekend riding . Looks very easy now to do . Thanks for the video again . Front facia is only about 70 dollars if anyone every cracks it . Dealer wanted 140 plus to install it .

[@lucynightfall455]

Good video! And the handsome guy, uhh Thor, was a good touch! 😁

[@underourrock]

I thought I commented. Meant to say that this was an incredibly helpful video and really appreciate the time you took to show the fasteners. The only issue I had last night when I did this was the 3 little tabs that the eyebrow / DRL has to fit into. The new ones (Corbin Customs Ghosts) were just a little tricky to get the tabs to go in. I ended up using my knife to trim the very edge of the opening ever so slightly to make it easier to catch the tab. Anyway, also wanted to say hi from southern NM. Thanks again for this video.

[@reviewittv1802]

Glad everything worked out for your lights I appreciate you stopping by and showing the channel love.

[@richardsisneros9888]

Very informative video, recommended, found two other videos and neither were as informative as this one thanks review it tv.

[@keithj.geising595]

Just remove your headlights. You can get the black inserts out after that.

[@keithj.geising595]

You dont have to take the front end off to do this. Just remove your headlights and you can get the black plastic pieces out and the lights will slid right in if your careful. Took me about 20min to do both sides on mine. Never removing anything bur the headlights.

[@reviewittv1802]

The title said "Front cover removal" and Daytime running lights install but for those that are interested in just the lights, noted.

[@jorgeluisponce3766]

Buen video 👌, saludos... sigue así.

[@reviewittv1802]

GRACIAS

[@reviewittv1802]

Remove the front cover of your X3 Turbo and or install and change out Signature/Daytime running lights yourself!!!

[@geoffreyrogers5036]

could you post a picture of the fuse box and the relay that these DRL's run off of? Everyone with a 2021 is looking for it that doesnt have these stock. i even went to the dealership and they couldn't figure it out

[@rednecksdoitbetter491]

Go to 26:00 to see how to put the running lights in

[@bryangutierrez6886]

What size light bar ?

[@reviewittv1802]

50"

[@room6767]

Mine didn’t turn on something else I need to do?

[@aliaspancho89]

Did you find out what to do

[@nismomike3182]

Neither did mine. I had to plug in the cable harness that came with the lights. I thought it was only necessary for the turn signal function, but it is also required for the DRL feature as well.

[@jesse6265]

If yours didnt turn on on amazon when u buy them they come with 2 extra wires with those u will flip the positive and negative no cutting no nothing easy

[@santiagogarcia-jc6tn]

I just bought mine and connected them and for some reason they don’t turn on

[@reviewittv1802]

Should light up soon as you put the key in and hit the start button.

[@santiagogarcia-jc6tn]

@@reviewittv1802 yes I know I did it just like ur video and nothing

[@reviewittv1802]

@@santiagogarcia-jc6tn Check fuses, power to drl harness other then that faulty product

[@santiagogarcia-jc6tn]

@@reviewittv1802 I will check fuses Thanks bro

[@santiagogarcia-jc6tn]

@@reviewittv1802 I checked fuses and they all look good I also tried the lights with a battery and they work.. so idk what the problem is ... I have the turbor ds

[@RubSomefastOnIt]

just breaking in my first SXS ( 23 X3 DS RR) much appreciate the videos and showing EVERYTHING. so many of these projects are super easy if you know exactly where all the bolts are. if I was poking around in the dark trying to find that last bolt holding something on it would be frustrating.

[@reviewittv1802]

I'm glad to help, and congrats on your new machine!!