Max ReBar Tier RB397 Instructional video

[@271production]

This tool is awesome, we use it every once in a while and anyone can use it. The great thing is that you can tie strongly and quickly without having to be experienced in tieing rebar.

[@Buster5000]

are you sure that strongly ?? are you sure it ties strongly ?? it seems that the knot is not that strong

[@Arltratlo]

@@Buster5000 a lot of wire and not holding the bars together...

[@rockdawg1467]

I knew it was a matter of time that they would come up with this will be a time saver

[@FastenerUSAdotcom]

Hi Brian, there has been some good improvements at keeping debris and moisture out of the internal parts compared to earlier generations such as RB392 and RB395. Earlier models needed to have a tool cover for dusty/moist environments because the frames did not seal well enough. But the RB397 has a much tighter seal on the frames. If you're still concerned about moisture Max has a tool cover to fit this model available.

[@corbingreiner9879]

I got out of the concrete tilt up business back in1998. We were still using the manual drill style twister. I feel like the last guy to use a musket in the civil war and I've just seen my first machine gun demonstration.

[@Del-Canada]

I was trying before that and we just used our hands and pliers.

[@prov0cative69]

@@Del-Canada I'm a steelman currently and literally every steelman on my site uses our hands and pliers, seems like it still the norm, only people I see use these kinds of tool are electricians and pipe layers.

[@Del-Canada]

@@prov0cative69 I made a typo. I meant to say tying and not trying. LOL Well, you knew what I meant obviously. Do you tie in the cold? I live in eastern Canada and you were out tying steel regardless of the temp. Man, some crazy days, but so many great days also. Always worked with good crews. Made some lifetime friends also. I have been retired from that work since 1997.

[@prov0cative69]

@@Del-Canada Yeah we do, im in Canada as well (Ontario), so I feel ya on the cold days haha. Always a deadline to meet and never enough areas to warm up. We've actually had the opposite issue this past week though where its been over 40 degrees with the humidex in September, way too hot but shits gotta get done. It's a great job though, pays great, keeps you fit, and idk about other sites but I've met so many interesting and hard working people, really seems just like a collection of competent workers for the most part in the trade, very few weak links, anyone who keeps the job more than 3 months seems to turn into a near perfect worker, its great.

[@Del-Canada]

@@prov0cative69 It's hard to find people with a solid work ethic these days. Everybody is a social media clout goblins.

[@marcushennings9513]

Great tool.. easy to understand, use and well worth the purchas if doing a big project.

[@Arltratlo]

lol, 2m² is not a big thing...

[@johannesdolch]

Why the hell are 2.6 million people watching this. The total amount of people who will ever use this is maybe 100k. Speaking of it, why the hell am i watching this in the middle of the night.

[@itsmemaario]

Bro, We are the wanderers of the endless ocean of internet. Happy voyages.

[@nguyenhoanggiang7297]

I view this because of that number LOL

[@ebrahemmh]

Same here :)

[@gmacmachuri1217]

asking my self the same question haha

[@-_-MARANTZ]

me too

[@FastenerUSAdotcom]

We appreciate your concern. While the gears may look like plastic, they are are actually made of high quality hardened steel. They will have extremely long life so long as you use TW897A wire that has not been rusted from exposure. Rusty wire acts like a file on the teeth on the feeding gears wearing them down faster. For the longest life on the feeding gears use use Electro Galvanized or Poly Coated wire. Replacement cost on these are $81 USD per gear.

[@ameunier41]

Some explaining 1- The dial must be a tension dial, you want more pressure you put it to 3. 2: The price tag will go down when the patent drop.

[@Fanta....]

Has the patent drop yet? my hanz now ground to nubs, also nubs starting to grind to dust, also dust is getting into sensor.

[@Fanta....]

It's 3am right now, but i feel i'm too invested to stop watching it the whole way through now. Is this even real life?

[@blackhearted6]

kzbin.info/www/bejne/f5OrXol4Yq14lbs

[@electriciandallastx9182]

Thanks for the suggestions you have contributed here.

[@djmorganofficial5807]

what a smart bit of kit, i never seen one before, it was in my to watch list on here

[@HeyChongo]

Seen someone selling one of these and curiosity killed the cat lol. That's how I got here

[@majdq8]

This is a solution for a problem that doesn't exist. An experienced rebar tier can do it just as fast without the danger or complications.

[@Alalpog]

+majdq8 the problem of that is that experienced rebar tiers are decreasing in number.

[@b0ssm4ch1n3]

Defiantly cant tie as fast lol. Watch the Wacker Neuson version. Actually looks decent. I'd love to see someone walk on site with one 😂😂

[@edmondsamurri5637]

majdq8

[@aguilayserpiente]

majdq8 The point of the tool is automation to eliminate units of labor.

[@Pickleb3218]

I tie faster and tighter then that, and use way less wire

[@firstgabion7741]

great video, very helpful information, thanks a lot !

[@mortie806]

I have built thousands of cages we had some thing similar to this it, it work enough to hang bars but not secure them strong enough to be picked up by a crane they are fast and sloppy and are not consistent, but they do help screw with your buddy's water bottles

[@FastenerUSAdotcom]

There is a tension setting on the top of the tool which increases the tightness of the tie. However, in some applications, depending on the bar size and weight of the cage it is entirely possible that the tie may not be tight enough to crane some cages up into the air. Thanks for your feedback.

[@godinnlives1591]

You mean, you already know and didn't bother to tell the truth in the video

[@capcadoi]

Of course this tool is not the answer to all building site necessities. This is a tool for tying light rebar structures. I'm not even working in the construction field and I managed to figure this out. This is like saying your car manufacturers lied to you and didn't tell you your car is suitable for all kinds of terrain. It's basic common sense.

[@akramgoogl6095]

mortie806 did you try it before? really the manual way it's better and stronger?

[@jackwilliams7738]

@@FastenerUSAdotcom what is the tightest tension?

[@rwc201]

These do work well for smaller bar/wire mesh. It would be great if you could run one off a wire spool on your belt - small wire cartridges don't last long & are pricey!

[@Del-Canada]

This would have been nice thirty years ago when I was tying rebar by hand for 5 years on major bridge project.

[@npsingh6060]

Cost of this machine

[@npsingh6060]

Cost of this Mac

[@Del-Canada]

@@npsingh6060 Mmhm.

[@thisizcle140]

legit tool.....obviously not the best for very large mats.....but your basic rebar ties in footers and bar not needing to be moved very far this is a great tool but does get easily jammed with dirt and sand but careful use can avoid that

[@TyDaleChannel]

I wish I could see more of the mechanism on how the wires are wrapped around eachother

[@mattcreator8480]

it's nearly 3am and this tool bites.

[@hamlettelmah441]

Single loop ties it better and stronger than double or triple loops. In my construction days laying rebar was when our hourly used to go up to $ 55 an hr each and we used to do overtime all 5 days of the week. Oh the old days,

[@marcoantoniomartinezdonoso1180]

La use en las tórtolas en el año 2008 y 2011, es muy buena,👍👍👍

[@ec-jf1fc]

How did I get here?

[@WLFD2025]

How did I end up here? Why am I watching this video? What am I doing with my life?

[@erebostd]

I don't even know what this thing exactly is doing!

[@FrustratedBaboon]

Waiting to get old and die.

[@Matanumi]

anything to keep you from tieing bar for the rest of time

[@bibolcs]

Because you are not a pro in nothing

[@Anonymous-up9ne]

You are just doing your time here mate this world is a prison.

[@indubitably_]

Looks like a harbor freight quality tool. The wire is the strongest part on it

[@smacman68]

You have been owned. And I would much rather use this awesome tool than the way the guys are working their asses off in your video.

[@paintbasstard]

how did I go from watching 22plinkster to this?

[@giuseppebattagliese6424]

Bravo hai risolto un problema vero,mi spiego facile per carpentiere professionista disprezzarlo,ma una volta migliorato lo dovrà accettare di forza. Vedi carpentiere raggiunge la tua precisione e non si stanca mai,per velocità(pensate ai grattacieli o a strutture complesse con milioni di legature)che può fare, almeno dimezzare i tempi.

[@AgricultureBangladesh]

nice product

[@pascoesvale]

Why am I watching this at 7am?

[@ynlalkhalil4511]

nice video

[@eddiedazz6284]

excellent tools

[@lilylily1114]

+Eddie dazz rebar tier rebar cutter rebar tying machine rebar tying tool rb397 rb395 KW0039 KW0041 xdl400 RT580RT450RT280 www.kowytools.com Specifications of RT-580 450 280 machines Model RT-580 RT-280 RT-450 Applicable Rebar Size 12-65 mm 4-28 mm 6-40 mm Wraps per knot 3-4 wraps 2-3 wraps 2-3 wraps Ties per charger 2500 knots 3300 knots 2700 knots Ties per roll of wire 90-78 knots 230-170 knots 170-120 knots Wire length per tying 103-128 cm 43-58 cm 60-82 cm Machine Size 31.5*30.5*10.5cm 28*30*10.5 cm 30*30*10.5cm Machine Net Weight 2.8 Kg 2.7 Kg 2.7 Kg Battery Type Li-ion Li-ion Li-ion Charging Time 70 minutes 70 minutes 70 minutes Wire diameter 0.8 mm 0.8 mm 0.8 mm Length per coil 100 m 100 m 100 m Weight per coil 0.40 Kg 0.40 Kg 0.40 Kg Pack per box 2 pcs 2 pcs 2 pcs Charger per box 1 pcs 1 pcs 1 pcs Package size 48.5*13.5*38.5 cm 48.5*13.5*38.5 cm 48.5*13.5*38.5 cm Package weight 7.70 Kg 7.65 Kg 7.65Kg 1.one year warranty for the machine with CE certificate 2.One set package includes: one machine two pcs batteries one charger one user manual one pliers four rolls of wire coils one plastic box one gift box 3.The package: after plastic box is a small carton then 3 or 2 pcs into a big carton. REDUCES TYING TIME 5 times faster than manual tying. Makes ties in less than 1sec. per tie with consistent tie strength. High speed tying saves you time and money. LI-ION HIGHER CAPACITY BATTERY Thanks to the Lithium-lon battery technology the RT450 ties approx. 3000 ties per charge which is 6 times more than Ni-Cd model. Less charging time means more productive work on the jobsites. Also Lithium-Ion battery has no Memory Effect so you can charge the battery whenever convenient BRUSHLESS TWISTING MOTOR The brushless electric motor offers higher efficiency and longer life. It increases ties per charge by 35% comparing with older model motor and does not require service caused by brush erosion or dirt on commutator. LIGHT WEIGHT & COMPACT BODY Weighs only 5.2lbs Easy to handle. ONE HAND OPERATION Allows worker to hold re-bar while tying reducing set up time. RFQ 1. Q: Are you a factory or a trading company ? A: We are a factory. 2. Q: Can you provide samples ? A:yes we are able to offer samples. 3.Q: How can I have a Proforma Invioce/Quotation? A: You can have Proforma Invoice/Quotation either by providing us the list of your requirements through fax email or by sending an enquiry. 4.Q: What options do I have for paying the freight charges? A: We make the Proforma Invoice as per the clients’instructions like FOB & EXW. 5.Q: What are your payment terms? A: All payments should be made in US dollarsunless specified in the quotation sent to you. NINGBO KOWY INDUSTRY LIMITED Website: www.kowytools.com E-mail: m15657822183(AT)gmail.com Whatsap:008615258288031 Skype: m15657822183(AT)163.com Mobile: [phone] Tel: [phone] Fax: [phone] Add: No.1 Ningxing Road Yuelong Street Ninghai County Ningbo City Zhejiang Province China WELCOME TO OUR FACTORY!

[@mohammedtoyyub6969]

Hi my question is that can our local manual wire be rolled around the once the refill runs out because importing won't be feasible

[@davesstuff1599]

Nice tool but the joint isn't tight, will kick back an inspection easily.

[@ulifeldsieper364]

I used it in swiss and we had a lot of error and used more wire than before !! we usually used around 200 kg per 10 tons of beams welded nd wired. this machine misses the rebar so often that I spend 2000Euro per month just on error its a nice idea but it needs to work better and the price is ......

[@Ripedg]

best machien out ther! U cant comper hande wire ore eny thing. Thirst time i just it whos 2004. u cant comper whit hand work! i work in sweden.

[@Knox-umbra]

How did I even end up on this video?

[@leobardohernandez9434]

S. J

[@vutan4492]

can it use for 1.5mm dia wire?

[@FastenerUSAdotcom]

Uses only MAX TW898 tie wire. www.fastenerusa.com/tw898-regular-max-tie-wire-50-roll-case.html

[@karljcraig]

great tool ties off slab mesh heaps fast

[@rubenl2628]

Getting big slabs ready this thing is worth it then doing it old.school wire and pliers or spinners

[@naveenmadhukar3135]

Is there any store in india for that product..?

[@RickArchuleta-vm2ch]

How do you adjust the wire to get tight

[@FastenerUSAdotcom]

There is a tension dial on the top of the tool.

[@fredysejas1022]

Me gustaria adquirir la maquina, podria darme costo o mayor referencia

[@cammsacammsa175]

En Perú vendemos información inbox

[@jenniferanderson9931]

smart like horse strong like tractor

[@youderektube1]

No,no: "Strong like bull, smart like tractor" (in your best Russian accent).

[@philipdove1705]

When Milwaukee makes one I'll buy it

like new, i friend of mine brough it to me from pensylvania

[@memyselfandcorpse2]

Used em. These things suck, seems like a GOOD idea, but it can only do one type of tie, and they're REALLY prone to jamming. I'd chose my manual knipex 300s over this anyday.

[@mr.tomahawkthefirst4433]

Would this work on chicken wire if im attaching it to chain link?

[@FastenerUSAdotcom]

For attaching chicken wire to chain link we would recommend using the RB218. It is a model for used specifically for tying mesh x mesh and up to #3 x #3 and should work fine for your specific application. Here is a link to the RB218 www.fastenerusa.com/rb218-max-rebar-tier.html

[@mgdazam8209]

time saver but it doesnt tie it tightly so manual is much better

[@makim-k5850]

Also, these things cost literally over $2,000

[@KevinPolin]

You don't need it that tight...

[@jj8171]

this means it will work with your luck

[@sudhakarpatil7573]

nice one...!!!

[@sethukrish4464]

I would like to have a quotation and could you deliver at Doha

[@jeffteengfo3109]

why is this in my recommendation?

[@alvarenga512]

si queres nudos flojos, gastar mas alambre y una herramienta pesada; compren esto jajajaja

[@charlotteduron3891]

No importa si esta flojo el concerto va cubrir el ribar

[@motasemkl6745]

How can I contact your office or your company?? Is there a website??

[@FastenerUSAdotcom]

Our website is www.fastenerusa.com or you can call toll free 877-593-2723 or 209-522-4951. Thanks for inquiring.

[@rodrigoosorioosorio5364]

Pregunta: una vez se termine el alambre en el carretel, se puede recargar?

[@reyesmorales100]

si se acaba el alambre tienes que comprar otra nueva

[@sankalpngopunjab]

Nice

[@josealfonsorosas4887]

soy de Colombia,me interesa conocer el precio y en que ciudad la consigo.

[@refael1982]

I'm from Israel. I wanted to know how I buy this device? And how much it costs me if I invite 500 1000 units?

[@Fanta....]

For those numbers, you're looking at a pretty decent Tie Orgy if you use fancy gold lettering and embossing on your invites.

[@rodrigoosorioosorio5364]

Por favor necisto saber cuanto vale y cuantos dias demora el envio a colombia. cual es el sitema de pago

[@aphextwin1991]

This is only good to give to a labourer who doesnt know to tie correctly to help the professionals.. concrete life

[@desmondfrancis6038]

Yes man

[@jamesrock8521]

better manual laborer to tie bar , no maintenace

[@shadowblack1987]

No.

[@joshua7426]

umm yes, much faster and efficient to use a whirlie bird tool than an overpriced electric tool

[@cranci]

He wouldn't even jam

[@Mitchs]

if this tool way too much yell yeah

[@mr-t1243]

The plastic looks brittle on the tool

[@deej19142]

Did they spell coated wrong?

[@mar1video]

Yes

[@godinnlives1591]

They spelled tie-er wrong as well

[@juanpablogdoce]

amigos , estoy en COLOMBIA SUR AMERICA , donde pedo conseguir esta herramienta y cuanto vale

[@jolujo5842]

I'm not seeing where this thing would save manhours. Actually it looks like a time and money burner.

[@crystalmay4886]

agreed.

[@cranci]

like those electric knives..

[@schmooza6812]

You obviously have never tied an acre of rebar.

[@joshpoe]

;you hit the nail on the head, I like the part where it says keep it away from dust. Haha good thing there is no dust when doing footing and stems.....

[@bdbdbdbdbd]

This Japanese instrument)

[@joseph-mariopelerin7028]

it really look like a p-of-s black and decker... for light gardener only! im sure if you use that tool with dirty gloves, it just catch on fire

[@aureliocontreras6685]

Donde se con siguen en México distrito federal

[@cperlera]

Aurelio Contreras buena suerte si lo consigues vale $2,500 dollars y la caja de alambre vale $450 y solo trae 50 rollitos y no amarra bien apretado

[@ragavagroupsbusinessopport3717]

where is available how much

[@npsingh6060]

Cost of max Rebar machinr

[@seanpaul320aaa]

the prices is 250$ Each ?

[@FastenerUSAdotcom]

For pricing please go to www.fastenerusa.com/rb398-max-rebar-tier.html

[@GroupDenmark]

250US are not ewen close.. 2400US.. but its an amazing tool, though the price seems hysteric anno2016.

[@gpcm9226]

When I read 250$ I thought..."Meh, maybe" at 2400 there is no way in heck.

[@sharpjk]

when they start making fake copies in China then prices will drop

[@bdbdbdbdbd]

You will not believe it, 4-5 years ago started to do)))

[@gueddahichem3349]

combien ça coûte c'est trot bien ça pour les chantier

[@dazaessox]

will never beat a proper steel fixer would have the job done in fraction of a time and better job

[@ssss-df5qz]

and less wire?

[@crystalmay4886]

+ss ss damn straight

[@Recovering_Californian]

riiiight ...sure you could

[@ssss-df5qz]

+mikeallenbrown1 - says you, the quite obviously not rebar fitter!

[@dazaessox]

Worked with steel for years Prove me wrong loud mouth

[@rameshchintha9703]

super

[@itsmemaario]

Awesome synths though.

[@sahirambhadunokha5341]

Nice your office in india n prize machine

[@lilylily1114]

+sahiram bhadu nokha rebar tier rebar cutter rebar tying machine rebar tying tool rb397 rb395 KW0039 KW0041 xdl400 RT580RT450RT280 www.kowytools.com Specifications of RT-580 450 280 machines Model RT-580 RT-280 RT-450 Applicable Rebar Size 12-65 mm 4-28 mm 6-40 mm Wraps per knot 3-4 wraps 2-3 wraps 2-3 wraps Ties per charger 2500 knots 3300 knots 2700 knots Ties per roll of wire 90-78 knots 230-170 knots 170-120 knots Wire length per tying 103-128 cm 43-58 cm 60-82 cm Machine Size 31.5*30.5*10.5cm 28*30*10.5 cm 30*30*10.5cm Machine Net Weight 2.8 Kg 2.7 Kg 2.7 Kg Battery Type Li-ion Li-ion Li-ion Charging Time 70 minutes 70 minutes 70 minutes Wire diameter 0.8 mm 0.8 mm 0.8 mm Length per coil 100 m 100 m 100 m Weight per coil 0.40 Kg 0.40 Kg 0.40 Kg Pack per box 2 pcs 2 pcs 2 pcs Charger per box 1 pcs 1 pcs 1 pcs Package size 48.5*13.5*38.5 cm 48.5*13.5*38.5 cm 48.5*13.5*38.5 cm Package weight 7.70 Kg 7.65 Kg 7.65Kg 1.one year warranty for the machine with CE certificate 2.One set package includes: one machine two pcs batteries one charger one user manual one pliers four rolls of wire coils one plastic box one gift box 3.The package: after plastic box is a small carton then 3 or 2 pcs into a big carton. REDUCES TYING TIME 5 times faster than manual tying. Makes ties in less than 1sec. per tie with consistent tie strength. High speed tying saves you time and money. LI-ION HIGHER CAPACITY BATTERY Thanks to the Lithium-lon battery technology the RT450 ties approx. 3000 ties per charge which is 6 times more than Ni-Cd model. Less charging time means more productive work on the jobsites. Also Lithium-Ion battery has no Memory Effect so you can charge the battery whenever convenient BRUSHLESS TWISTING MOTOR The brushless electric motor offers higher efficiency and longer life. It increases ties per charge by 35% comparing with older model motor and does not require service caused by brush erosion or dirt on commutator. LIGHT WEIGHT & COMPACT BODY Weighs only 5.2lbs Easy to handle. ONE HAND OPERATION Allows worker to hold re-bar while tying reducing set up time. RFQ 1. Q: Are you a factory or a trading company ? A: We are a factory. 2. Q: Can you provide samples ? A:yes we are able to offer samples. 3.Q: How can I have a Proforma Invioce/Quotation? A: You can have Proforma Invoice/Quotation either by providing us the list of your requirements through fax email or by sending an enquiry. 4.Q: What options do I have for paying the freight charges? A: We make the Proforma Invoice as per the clients’instructions like FOB & EXW. 5.Q: What are your payment terms? A: All payments should be made in US dollarsunless specified in the quotation sent to you. NINGBO KOWY INDUSTRY LIMITED Website: www.kowytools.com E-mail: m15657822183(AT)gmail.com Whatsap:008615258288031 Skype: m15657822183(AT)163.com Mobile: [phone] Tel: [phone] Fax: [phone] Add: No.1 Ningxing Road Yuelong Street Ninghai County Ningbo City Zhejiang Province China WELCOME TO OUR FACTORY!

[@BillyBob-ik4pn]

2:55 coarted wire

[@Fanta....]

Special wire with special coarting. the coarting is how they make baby wires.

[@-_-MARANTZ]

Rock up on the segway. Pull this bad boy out of your satchel..

[@kevinwelsh4191]

Colin oftheshire

[@kevinchamberlain7928]

Million hits? How many bloody steel fixers are there?

[@craigmorton8201]

4.4 Million in 2020... Its one of the fastest moving industries

[@kevinchamberlain7928]

@@craigmorton8201 Not in North Wales, it isn't!

[@angeldelgado259]

una pena cuando yo hacia eso no tener una de esas todo era a mano talves por eso no tengo vertebra sana.espalda

[@jahRambo]

way faster than tying by hand but malfunction constantly requiring very expensive servicing

[@FastenerUSAdotcom]

Here's a few things you can do to keep your tool running smooth without needing costly repairs. 1) Blow out the feeding gear channels with compressed air at the end of each day. 2) Keep the tool off the ground. Use the belt clip. This prevents small rocks and foreign debris from entering the housing as well protecting the frames from unnecessary damage 3) Using the tool properly. All the information you need for preventative maintenance is included in this video. To learn about this we recommend taking the time to watch the entire instructional video. Thanks for your feedback.

[@reyesmorales100]

never faster than tying whit hand,

[@hanstihansati5508]

What Indian price please answer

[@Fanta....]

8 Billion Shitsvillian Micropesos

[@neerajdubey972]

Where find it in india

[@rvaaahavs1246]

We are authorised Distributor Call on / कॉल करें : 7303628771 / 8791323768 (For best prices)

[@SDeww]

this machine will never be mass used in construction, its too delicate with its censors and dust and all that nonsense, and if you buy this machine than you have to buy their wire and supplies, the way its being done now is more cost efficient.

[@codymckenna847]

Looks cheap but would be handy to do some things

[@ricethao9379]

it well last long if you don't work with concrete or outside project ..

[@FastenerUSAdotcom]

It is true that this tool is a very sophisticated machine and should be treated with respect, which doesn't always bode well on construction projects using concrete and re-bar. However, as we've mentioned in response to other posts there's a few things you can do to keep your tool running smooth 1) Blow out the feeding gear channels with compressed air at the end of each day. 2) Keep the tool off the ground. Use the belt clip. This is key since this will prevent small rocks and foreign debris from entering the housing as well protecting the frames from unnecessary damage 3) Using the tool properly. All the information you need for preventative maintenance is included in this video. To learn about this we recommend taking the time to watch the entire instructional video. Thanks for your comment.

[@govindadhikari9159]

how much this price sir?

[@FastenerUSAdotcom]

Price can be found here www.fastenerusa.com/rebar-products/max-rebar-tiers-tie-wire-accessories/ Thanks for inquiring.

[@SuperBlobsterMan]

Contractors don't care about neat and tight. Especially non-union rat contractors. Its all about speed and minimizing the hands that need to be hired.

[@tubestick00]

My eyes are drooping. It is late. I am wasting my life watching this. Next I will watch some more excavator videos.

[@Fanta....]

May I Suggest you search Andrew Camarata. cool vids.

[@carlossarmientoperez5195]

SOLICITO COTIZACION DE ESTA MAQUINA Y ESPECIFICACIONES

[@navnig]

We got one of these last week, I'm not too impressed with it to be honest. Hand tying produces a far tighter and neater tie.....Just my opinion.

[@npsingh6060]

Cost

[@eugenix8875]

dope

[@angelgomez6549]

hola necesito unas para colombia como nos contatamos

[@FastenerUSAdotcom]

To find a MAX dealer in your country please contact MAX Corp office here wis.max-ltd.co.jp/int/

[@reyesmorales100]

amigo aprenda a usar la pinzas y el riel para alambre, yo he sido barillero por mas de diez años, y esa maquina nunca va a hacer el trabajo que uno puede hacer ni la velocidad ni la calidad del amarre

[@JerryDoe]

botando la plata, no gracias con ese plata puedo rumbear una semana

[@craigmorton8201]

Whos here in 2020????

[@tomlund4951]

Get a rod wrench and a pair!

[@c0rpsegrinder]

Klein #9, the only real one.

[@colthaakanson1627]

Man can out tie machine

[@tommy_the_4th_of_july_king119]

It's called safety not trigger lock